From patchwork Sat Dec 27 09:27:59 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: yisun1 X-Patchwork-Id: 5544451 Return-Path: X-Original-To: patchwork-linux-mmc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 9F5829F2E2 for ; Sat, 27 Dec 2014 09:35:36 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 188CE2016C for ; Sat, 27 Dec 2014 09:35:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9770C20155 for ; Sat, 27 Dec 2014 09:35:28 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751079AbaL0Jf0 (ORCPT ); Sat, 27 Dec 2014 04:35:26 -0500 Received: from mga03.intel.com ([134.134.136.65]:4210 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751362AbaL0JfY (ORCPT ); Sat, 27 Dec 2014 04:35:24 -0500 Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by orsmga103.jf.intel.com with ESMTP; 27 Dec 2014 01:32:36 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.07,650,1413270000"; d="scan'208";a="643377947" Received: from yisun2-hp-compaq-8200-elite-sff-pc.bj.intel.com ([172.16.181.62]) by fmsmga001.fm.intel.com with ESMTP; 27 Dec 2014 01:35:20 -0800 From: Yi Sun To: linux-mmc@vger.kernel.org, ulf.hansson@linaro.org Cc: yi.y.sun@intel.com Subject: [RFC 2/2] mmc: sdhci: support UHS-II in SDHCI host. Date: Sat, 27 Dec 2014 17:27:59 +0800 Message-Id: <1419672479-30852-3-git-send-email-yi.y.sun@intel.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1419672479-30852-1-git-send-email-yi.y.sun@intel.com> References: <1419672479-30852-1-git-send-email-yi.y.sun@intel.com> Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch adds the UHS-II support in host layer. This is a RFC patch for community review. Signed-off-by: Yi Sun --- drivers/mmc/host/Makefile | 2 +- drivers/mmc/host/sdhci-pci.c | 6 + drivers/mmc/host/sdhci-uhs2.c | 703 +++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-uhs2.h | 36 +++ drivers/mmc/host/sdhci.c | 259 ++++++++++++--- drivers/mmc/host/sdhci.h | 313 +++++++++++++++++- include/linux/mmc/sdhci.h | 2 + 7 files changed, 1269 insertions(+), 52 deletions(-) create mode 100644 drivers/mmc/host/sdhci-uhs2.c create mode 100644 drivers/mmc/host/sdhci-uhs2.h diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f7b0a77..254ab40 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_MXS) += mxs-mmc.o -obj-$(CONFIG_MMC_SDHCI) += sdhci.o +obj-$(CONFIG_MMC_SDHCI) += sdhci.o sdhci-uhs2.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-o2micro.o diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 0342775..b20a2e7 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -255,6 +255,12 @@ static void sdhci_pci_int_hw_reset(struct sdhci_host *host) { u8 reg; + /* Since SDHC 4.0, bit 4 of is used to enable VDD2 for + * UHS2. + */ + if (host->version >= SDHCI_SPEC_400) + return; + reg = sdhci_readb(host, SDHCI_POWER_CONTROL); reg |= 0x10; sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c new file mode 100644 index 0000000..3f3184f --- /dev/null +++ b/drivers/mmc/host/sdhci-uhs2.c @@ -0,0 +1,703 @@ +/* + * linux/drivers/mmc/host/sdhci_uhs2.c - Secure Digital Host Controller + * Interface driver + * + * Copyright (C) 2014 Intel Corp, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include + +#include + +#include "sdhci.h" +#include "sdhci-uhs2.h" + +#define DRIVER_NAME "sdhci_uhs2" +#define DBG(f, x...) \ + pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x) + +static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) +{ + u32 ier; + + ier = sdhci_readl(host, SDHCI_INT_ENABLE); + ier &= ~clear; + ier |= set; + sdhci_writel(host, ier, SDHCI_INT_ENABLE); + sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE); +} + +static void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, + u32 set) +{ + u32 ier; + + ier = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS_EN); + ier &= ~clear; + ier |= set; + sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_STATUS_EN); + sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_SIG_EN); +} + +void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask) +{ + unsigned long timeout; + u32 uninitialized_var(ier); + u32 uninitialized_var(ier2); + + if (!(host->mmc->caps & MMC_CAP_UHS2)) + return; + + sdhci_writew(host, mask, SDHCI_UHS2_SW_RESET); + + if (mask & SDHCI_UHS2_SW_RESET_FULL) { + host->clock = 0; + /* Reset-all turns off SD Bus Power */ + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_off(host); + } + + /* Wait max 100 ms */ + timeout = 10000; + + /* hw clears the bit when it's done */ + while (sdhci_readw(host, SDHCI_UHS2_SW_RESET) & mask) { + if (timeout == 0) { + pr_err("%s: Reset 0x%x never completed.\n", + mmc_hostname(host->mmc), (int)mask); + sdhci_dumpregs(host); + return; + } + timeout--; + udelay(10); + } +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_reset); + +static u8 sdhci_calc_timeout_uhs2(struct sdhci_host *host, + u8 *cmd_res, + u8 *dead_lock) +{ + u8 count; + unsigned cmd_res_timeout, dead_lock_timeout, current_timeout; + + /* + * If the host controller provides us with an incorrect timeout + * value, just skip the check and use 0xE. The hardware may take + * longer to time out, but that's much better than having a too-short + * timeout value. + */ + if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) { + *cmd_res = 0xE; + *dead_lock = 0xE; + return 0xE; + } + + /* timeout in us */ + cmd_res_timeout = 5 * 1000; + dead_lock_timeout = 1 * 1000 * 1000; + + /* + * Figure out needed cycles. + * We do this in steps in order to fit inside a 32 bit int. + * The first step is the minimum timeout, which will have a + * minimum resolution of 6 bits: + * (1) 2^13*1000 > 2^22, + * (2) host->timeout_clk < 2^16 + * => + * (1) / (2) > 2^6 + */ + count = 0; + current_timeout = (1 << 13) * 1000 / host->timeout_clk; + while (current_timeout < cmd_res_timeout) { + count++; + current_timeout <<= 1; + if (count >= 0xF) + break; + } + + if (count >= 0xF) { + DBG("%s: Too large timeout 0x%x requested for CMD_RES!\n", + mmc_hostname(host->mmc), count); + count = 0xE; + } + *cmd_res = count; + + count = 0; + current_timeout = (1 << 13) * 1000 / host->timeout_clk; + while (current_timeout < dead_lock_timeout) { + count++; + current_timeout <<= 1; + if (count >= 0xF) + break; + } + + if (count >= 0xF) { + DBG("%s: Too large timeout 0x%x requested for DEADLOCK!\n", + mmc_hostname(host->mmc), count); + count = 0xE; + } + *dead_lock = count; + + return count; +} + +void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, + struct mmc_command *cmd) +{ + u16 mode; + struct mmc_data *data = cmd->data; + + if (data == NULL) { + /* clear Auto CMD settings for no data CMDs */ + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE); + if (cmd->opcode == MMC_STOP_TRANSMISSION) + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY; +#ifdef CONFIG_MMC_DEBUG + DBG("UHS2 no data trans mode is 0x%x.\n", mode); +#endif + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); + return; + } + + WARN_ON(!host->data); + + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY; + if (data->flags & MMC_DATA_WRITE) + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT; + + if (data->blocks == 1 && + cmd->opcode != MMC_READ_SINGLE_BLOCK && + cmd->opcode != MMC_WRITE_BLOCK) { + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN; + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE; + } + + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_UHS2_TRNS_DMA; + + if (host->mmc->flags & MMC_UHS2_2L_HD) + mode |= SDHCI_UHS2_TRNS_2L_HD; + + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); + +#ifdef CONFIG_MMC_DEBUG + DBG("UHS2 trans mode is 0x%x.\n", mode); +#endif +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_set_transfer_mode); + +void sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd) +{ + int i, j; + int cmd_reg; + + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { + if (cmd->uhs2_cmd == NULL) { + pr_err("%s: fatal error, no uhs2_cmd!\n", + mmc_hostname(host->mmc)); + BUG(); + return; + } + } + + for (i = 0; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i++) + sdhci_writeb(host, 0, SDHCI_UHS2_CMD_PACKET); + + i = 0; + sdhci_writeb(host, cmd->uhs2_cmd->header, + SDHCI_UHS2_CMD_PACKET + i++); + sdhci_writeb(host, (cmd->uhs2_cmd->header >> 8) & 0xFF, + SDHCI_UHS2_CMD_PACKET + i++); + sdhci_writeb(host, cmd->uhs2_cmd->arg, + SDHCI_UHS2_CMD_PACKET + i++); + sdhci_writeb(host, (cmd->uhs2_cmd->arg >> 8) & 0xFF, + SDHCI_UHS2_CMD_PACKET + i++); + + /* TODO: Per spec, playload (config) should be MSB before sending out. + * But we don't need convert here because I will set payload as + * MSB when preparing config read/write commands. + */ + for (j = 0; j < cmd->uhs2_cmd->payload_len/sizeof(u32); j++) { + sdhci_writeb(host, + (*(cmd->uhs2_cmd->payload + j) & 0xFF), + SDHCI_UHS2_CMD_PACKET + i++); + sdhci_writeb(host, + ((*(cmd->uhs2_cmd->payload + j)) >> 8) & 0xFF, + SDHCI_UHS2_CMD_PACKET + i++); + sdhci_writeb(host, + ((*(cmd->uhs2_cmd->payload + j)) >> 16) & 0xFF, + SDHCI_UHS2_CMD_PACKET + i++); + sdhci_writeb(host, + ((*(cmd->uhs2_cmd->payload + j)) >> 24) & 0xFF, + SDHCI_UHS2_CMD_PACKET + i++); + } + +#ifdef CONFIG_MMC_DEBUG + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); +#endif + + cmd_reg = cmd->uhs2_cmd->packet_len << + SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT; + if (cmd->flags & MMC_CMD_ADTC) + cmd_reg |= SDHCI_UHS2_COMMAND_DATA; + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmd_reg |= SDHCI_UHS2_COMMAND_CMD12; + + /* UHS2 Native ABORT */ + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT)) + cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT; + + /* UHS2 Native DORMANT */ + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == + UHS2_DEV_CMD_GO_DORMANT_STATE)) + cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT; + + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); + sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_send_command); + +void sdhci_uhs2_finish_command(struct sdhci_host *host) +{ + int i; + u8 resp; + + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); + if (resp & UHS2_RES_NACK_MASK) + pr_err("%s: NACK is got, ECODE=0x%x.\n", + mmc_hostname(host->mmc), + resp & UHS2_RES_ECODE_MASK); + } + + if (host->cmd->uhs2_resp && + host->cmd->uhs2_resp_len && + host->cmd->uhs2_resp_len <= 20) + /* Get whole response of some native CCMD, like + * DEVICE_INIT, ENUMERATE. + */ + for (i = 0; i < host->cmd->uhs2_resp_len; i++) + host->cmd->uhs2_resp[i] = sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i); + else + /* Get SD CMD response and Payload for some read + * CCMD, like INQUIRY_CFG. + */ + /* Per spec (p136), payload field is divided into + * a unit of DWORD and transmission order within + * a DWORD is big endian. + */ + for (i = 4; i < 20; i += 4) + host->cmd->resp[i/4-1] = (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i) << 24) | + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 1) << 16) | + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 2) << 8) | + sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 3); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_finish_command); + +void sdhci_uhs2_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) +{ + u8 cmd_res, dead_lock; + u16 ctrl_2; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + /* Preset register: no need to handle */ + /* Asynchronous interrupt enable */ + /* TODO: as async interrupt is same as SDHC 3.0 + * I think we don't need handle it here. + */ + + /* UHS2 Timeout Control */ + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock); + cmd_res |= dead_lock << SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT; + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL); + + /* UHS2 timing */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ios->timing == MMC_TIMING_UHS2) + ctrl_2 |= SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN; + else + ctrl_2 &= ~(SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN); + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) + sdhci_enable_preset_value(host, true); + + /* Set VDD2 */ + sdhci_set_power(host, ios->power_mode, ios->vdd, ios->vdd2); + + spin_unlock_irqrestore(&host->lock, flags); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_do_set_ios); + +static int sdhci_uhs2_interface_detect(struct sdhci_host *host) +{ + int timeout = 20; + + while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_UHS2_IF_DETECT)) { + if (timeout == 0) { + pr_warn("%s: not detect UHS2 interface in 200us.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return -EIO; + } + timeout--; + udelay(10); + } + + /* Enable UHS2 error interrupts */ + sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK, + SDHCI_UHS2_ERR_INT_STATUS_MASK); + + timeout = 150; + while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_UHS2_LANE_SYNC)) { + if (timeout == 0) { + pr_warn("%s: UHS2 Lane sync fail in 150ms.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return -EIO; + } + timeout--; + mdelay(1); + } + + DBG("%s: UHS2 Lane synchronized in UHS2 mode, PHY is initializaed.\n", + mmc_hostname(host->mmc)); + return 0; +} + +static int sdhci_uhs2_init(struct sdhci_host *host) +{ + u16 caps_ptr = 0; + u32 caps_gen = 0; + u32 caps_phy = 0; + u32 caps_tran[2] = {0, 0}; + struct mmc_host *mmc = host->mmc; + + /* TODO: may add corresponding members in sdhci_host to + * keep these caps. + */ + caps_ptr = sdhci_readw(host, SDHCI_UHS2_HOST_CAPS_PTR); + if (caps_ptr < 0x100 || caps_ptr > 0x1FF) { + pr_err("%s: SDHCI_UHS2_HOST_CAPS_PTR(%d) is wrong.\n", + mmc_hostname(mmc), caps_ptr); + return -ENODEV; + } + caps_gen = sdhci_readl(host, + caps_ptr + SDHCI_UHS2_HOST_CAPS_GEN_OFFSET); + caps_phy = sdhci_readl(host, + caps_ptr + SDHCI_UHS2_HOST_CAPS_PHY_OFFSET); + caps_tran[0] = sdhci_readl(host, + caps_ptr + SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET); + caps_tran[1] = sdhci_readl(host, + caps_ptr + SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET); + + /* Geneneral Caps */ + mmc->uhs2_caps.dap = caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK; + mmc->uhs2_caps.gap = caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK; + mmc->uhs2_caps.n_lanes = (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK) + >> SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT; + mmc->uhs2_caps.addr64 = + (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64) ? 1 : 0; + mmc->uhs2_caps.card_type = + (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK) >> + SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT; + + /* PHY Caps */ + mmc->uhs2_caps.phy_rev = caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK; + mmc->uhs2_caps.speed_range = + (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK) + >> SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT; + mmc->uhs2_caps.n_lss_sync = + (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK) + >> SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT; + mmc->uhs2_caps.n_lss_dir = + (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK) + >> SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT; + if (mmc->uhs2_caps.n_lss_sync == 0) + mmc->uhs2_caps.n_lss_sync = 16 << 2; + else + mmc->uhs2_caps.n_lss_sync <<= 2; + if (mmc->uhs2_caps.n_lss_dir == 0) + mmc->uhs2_caps.n_lss_dir = 16 << 3; + else + mmc->uhs2_caps.n_lss_dir <<= 3; + + /* LINK/TRAN Caps */ + mmc->uhs2_caps.link_rev = + caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK; + mmc->uhs2_caps.n_fcu = + (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK) + >> SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT; + if (mmc->uhs2_caps.n_fcu == 0) + mmc->uhs2_caps.n_fcu = 256; + mmc->uhs2_caps.host_type = + (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK) + >> SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT; + mmc->uhs2_caps.maxblk_len = + (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK) + >> SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT; + mmc->uhs2_caps.n_data_gap = + caps_tran[1] & SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK; + + return 0; +} + +int sdhci_uhs2_do_detect_init(struct sdhci_host *host) +{ + unsigned long flags; + int ret = -EIO; + + DBG("%s: begin UHS2 init.\n", __func__); + spin_lock_irqsave(&host->lock, flags); + + if (sdhci_uhs2_interface_detect(host)) { + pr_warn("%s: cannot detect UHS2 interface.\n", + mmc_hostname(host->mmc)); + goto out; + } + + if (sdhci_uhs2_init(host)) { + pr_warn("%s: UHS2 init fail.\n", + mmc_hostname(host->mmc)); + goto out; + } + + /* TODO: is this necessary? */ + /* Init complete, do soft reset and enable UHS2 error irqs. */ + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); + sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK, + SDHCI_UHS2_ERR_INT_STATUS_MASK); + + ret = 0; +out: + /* TODO: do some clear work here? */ + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_do_detect_init); + +static void sdhci_uhs2_set_config(struct sdhci_host *host) +{ + u32 value; + + /* Set Gen Settings */ + sdhci_writel(host, host->mmc->uhs2_caps.n_lanes_set << + SDHCI_UHS2_GEN_SET_N_LANES_POS, SDHCI_UHS2_GEN_SET); + + /* Set PHY Settings */ + value = (host->mmc->uhs2_caps.n_lss_dir_set << + SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS) | + (host->mmc->uhs2_caps.n_lss_sync_set << + SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS); + if (host->mmc->flags & MMC_UHS2_SPEED_B) + value |= 1 << SDHCI_UHS2_PHY_SET_SPEED_POS; + sdhci_writel(host, value, SDHCI_UHS2_PHY_SET); + + /* Set LINK-TRAN Settings */ + value = (host->mmc->uhs2_caps.max_retry_set << + SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS) | + (host->mmc->uhs2_caps.n_fcu_set << + SDHCI_UHS2_TRAN_SET_N_FCU_POS); + sdhci_writel(host, value, SDHCI_UHS2_TRAN_SET); + sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, + SDHCI_UHS2_TRAN_SET_1); +} + +static int sdhci_uhs2_check_dormant(struct sdhci_host *host) +{ + int timeout = 100; + + while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & + SDHCI_UHS2_IN_DORMANT_STATE)) { + if (timeout == 0) { + pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return -EIO; + } + timeout--; + mdelay(1); + } + return 0; +} + +int sdhci_uhs2_do_set_reg(struct sdhci_host *host, enum uhs2_act act) +{ + unsigned long flags; + int err = 0; + + DBG("Begin sdhci_uhs2_set_reg, act %d.\n", act); + spin_lock_irqsave(&host->lock, flags); + + switch (act) { + case SET_CONFIG: + sdhci_uhs2_set_config(host); + break; + case ENABLE_INT: + sdhci_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT); + break; + case DISABLE_INT: + sdhci_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0); + break; + case SET_SPEED_B: + sdhci_writel(host, 1 << SDHCI_UHS2_PHY_SET_SPEED_POS, + SDHCI_UHS2_PHY_SET); + break; + case CHECK_DORMANT: + err = sdhci_uhs2_check_dormant(host); + break; + default: + pr_err("%s: input action %d is wrong!\n", + mmc_hostname(host->mmc), act); + err = -EIO; + break; + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + return err; +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_do_set_reg); + +void sdhci_uhs2_irq(struct sdhci_host *host) +{ + u32 uhs2mask; + + uhs2mask = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS); + DBG("*** %s got UHS2 interrupt: 0x%08x\n", + mmc_hostname(host->mmc), uhs2mask); + + sdhci_writel(host, uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK, + SDHCI_UHS2_ERR_INT_STATUS); + + if (!(uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK)) + return; + + if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK) { + host->cmd->error = -EILSEQ; + if (uhs2mask & + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT) + host->cmd->error = -ETIMEDOUT; + } else if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK) { + if (!host->data) { + pr_err("%s: Got data interrupt 0x%08x even " + "though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)uhs2mask); + sdhci_dumpregs(host); + return; + } + + if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) + host->data->error = -ETIMEDOUT; + else if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_ADMA) { + pr_err("%s: ADMA error = 0x %x\n", + mmc_hostname(host->mmc), + sdhci_readb(host, SDHCI_ADMA_ERROR)); + host->data->error = -EIO; + } else + host->data->error = -EILSEQ; + } else + /* TODO: not sure if this is required. */ + host->cmd->error = -EILSEQ; + + /* TODO: per spec, below codes should be executed when data error + * found. But the codes will be executed in sdhci_tasklet_finish() + * finally. So remove them first. + */ +#if 0 + if (host->mmc->flags & MMC_UHS2_INITIALIZED) + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); +#endif + + if (host->data->error) + sdhci_finish_data(host); + else + tasklet_schedule(&host->finish_tasklet); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_irq); + +int sdhci_uhs2_add_host(struct sdhci_host *host, u32 caps1) +{ + struct mmc_host *mmc; + u32 max_current_caps2; + + if (host->version < SDHCI_SPEC_400) + return 0; + + mmc = host->mmc; + + /* Support UHS2 */ + if (caps1 & SDHCI_SUPPORT_UHS2) { + mmc->caps |= MMC_CAP_UHS2; + mmc->flags |= MMC_UHS2_SUPPORT; + } + + max_current_caps2 = sdhci_readl(host, SDHCI_MAX_CURRENT_1); + if (!max_current_caps2 && !IS_ERR(mmc->supply.vmmc2)) { + /* TODO: UHS2 - VDD2 */ + int curr = regulator_get_current_limit(mmc->supply.vmmc2); + + if (curr > 0) { + /* convert to SDHCI_MAX_CURRENT format */ + curr = curr/1000; /* convert to mA */ + curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER; + curr = min_t(u32, curr, + SDHCI_MAX_CURRENT_LIMIT); + max_current_caps2 = curr; + } + } + + if (caps1 & SDHCI_SUPPORT_VDD2_180) { + mmc->ocr_avail_uhs2 |= MMC_VDD2_165_195; + /* UHS2 doesn't require this. Only UHS-I bus needs to set + * max current. + */ + mmc->max_current_180_vdd2 = (max_current_caps2 & + SDHCI_MAX_CURRENT_VDD2_180_MASK) * + SDHCI_MAX_CURRENT_MULTIPLIER; + } else { /* TODO: shall I? */ + mmc->caps &= ~MMC_CAP_UHS2; + mmc->flags &= ~MMC_UHS2_SUPPORT; + } + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_add_host); + +void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead) +{ + if (!(host->mmc) || !(host->mmc->flags & MMC_UHS2_SUPPORT)) + return; + + if (!dead) { + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_FULL); + } + + sdhci_writel(host, 0, SDHCI_UHS2_ERR_INT_STATUS_EN); + sdhci_writel(host, 0, SDHCI_UHS2_ERR_INT_SIG_EN); + host->mmc->flags &= ~MMC_UHS2_SUPPORT; + host->mmc->flags &= ~MMC_UHS2_INITIALIZED; +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_remove_host); diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h new file mode 100644 index 0000000..524bf9f --- /dev/null +++ b/drivers/mmc/host/sdhci-uhs2.h @@ -0,0 +1,36 @@ +/* + * linux/drivers/mmc/host/sdhci-uhs2.h - Secure Digital Host Controller + * Interface driver + * + * Header file for Host Controller UHS2 related registers and I/O accessors. + * + * Copyright (C) 2014 Intel Corp, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#ifndef __SDHCI_UHS2_H +#define __SDHCI_UHS2_H + +#include +#include +#include +#include + +extern void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask); +extern void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, + struct mmc_command *cmd); +extern void sdhci_uhs2_send_command(struct sdhci_host *host, + struct mmc_command *cmd); +extern void sdhci_uhs2_finish_command(struct sdhci_host *host); +extern void sdhci_uhs2_do_set_ios(struct sdhci_host *host, + struct mmc_ios *ios); +extern int sdhci_uhs2_do_detect_init(struct sdhci_host *host); +extern int sdhci_uhs2_do_set_reg(struct sdhci_host *host, enum uhs2_act act); +extern void sdhci_uhs2_irq(struct sdhci_host *host); +extern int sdhci_uhs2_add_host(struct sdhci_host *host, u32 caps1); +extern void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead); + +#endif /* __SDHCI_UHS2_H */ diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index cbb245b..c7383a7 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2,6 +2,7 @@ * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver * * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * Copyright (C) 2014 Intel Corp, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,8 +30,10 @@ #include #include #include +#include #include "sdhci.h" +#include "sdhci-uhs2.h" #define DRIVER_NAME "sdhci" @@ -47,18 +50,14 @@ static unsigned int debug_quirks = 0; static unsigned int debug_quirks2; -static void sdhci_finish_data(struct sdhci_host *); - static void sdhci_finish_command(struct sdhci_host *); static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); static void sdhci_tuning_timer(unsigned long data); -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); #ifdef CONFIG_PM static int sdhci_runtime_pm_get(struct sdhci_host *host); static int sdhci_runtime_pm_put(struct sdhci_host *host); static void sdhci_runtime_pm_bus_on(struct sdhci_host *host); -static void sdhci_runtime_pm_bus_off(struct sdhci_host *host); #else static inline int sdhci_runtime_pm_get(struct sdhci_host *host) { @@ -71,12 +70,13 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host) static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) { } -static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +void sdhci_runtime_pm_bus_off(struct sdhci_host *host) { } +EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_off); #endif -static void sdhci_dumpregs(struct sdhci_host *host) +void sdhci_dumpregs(struct sdhci_host *host) { pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", mmc_hostname(host->mmc)); @@ -84,12 +84,21 @@ static void sdhci_dumpregs(struct sdhci_host *host) pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", sdhci_readl(host, SDHCI_DMA_ADDRESS), sdhci_readw(host, SDHCI_HOST_VERSION)); - pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", - sdhci_readw(host, SDHCI_BLOCK_SIZE), - sdhci_readw(host, SDHCI_BLOCK_COUNT)); - pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", - sdhci_readl(host, SDHCI_ARGUMENT), - sdhci_readw(host, SDHCI_TRANSFER_MODE)); + if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT) { + pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", + sdhci_readw(host, SDHCI_UHS2_BLOCK_SIZE), + sdhci_readl(host, SDHCI_UHS2_BLOCK_COUNT)); + pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", + sdhci_readl(host, SDHCI_ARGUMENT), + sdhci_readw(host, SDHCI_UHS2_TRANS_MODE)); + } else { + pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", + sdhci_readw(host, SDHCI_BLOCK_SIZE), + sdhci_readw(host, SDHCI_BLOCK_COUNT)); + pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", + sdhci_readl(host, SDHCI_ARGUMENT), + sdhci_readw(host, SDHCI_TRANSFER_MODE)); + } pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", sdhci_readl(host, SDHCI_PRESENT_STATE), sdhci_readb(host, SDHCI_HOST_CONTROL)); @@ -111,12 +120,21 @@ static void sdhci_dumpregs(struct sdhci_host *host) pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", sdhci_readl(host, SDHCI_CAPABILITIES), sdhci_readl(host, SDHCI_CAPABILITIES_1)); - pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", - sdhci_readw(host, SDHCI_COMMAND), - sdhci_readl(host, SDHCI_MAX_CURRENT)); + if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT) + pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", + sdhci_readw(host, SDHCI_UHS2_COMMAND), + sdhci_readl(host, SDHCI_MAX_CURRENT)); + else + pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", + sdhci_readw(host, SDHCI_COMMAND), + sdhci_readl(host, SDHCI_MAX_CURRENT)); pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", sdhci_readw(host, SDHCI_HOST_CONTROL2)); + if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT) + pr_debug(DRIVER_NAME ": UHS2 Err INT: 0x%08x\n", + sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS)); + if (host->flags & SDHCI_USE_ADMA) { if (host->flags & SDHCI_USE_64_BIT_DMA) pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n", @@ -131,6 +149,7 @@ static void sdhci_dumpregs(struct sdhci_host *host) pr_debug(DRIVER_NAME ": ===========================================\n"); } +EXPORT_SYMBOL_GPL(sdhci_dumpregs); /*****************************************************************************\ * * @@ -914,6 +933,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, u16 mode; struct mmc_data *data = cmd->data; + if (host->mmc->flags & MMC_UHS2_SUPPORT) { + sdhci_uhs2_set_transfer_mode(host, cmd); + return; + } + if (data == NULL) { if (host->quirks2 & SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) { @@ -952,7 +976,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, sdhci_writew(host, mode, SDHCI_TRANSFER_MODE); } -static void sdhci_finish_data(struct sdhci_host *host) +void sdhci_finish_data(struct sdhci_host *host) { struct mmc_data *data; @@ -983,6 +1007,14 @@ static void sdhci_finish_data(struct sdhci_host *host) else data->bytes_xfered = data->blksz * data->blocks; + /* TODO: shall we send CMD12 or ABORT packet to device for error case? + */ + if (host->mmc->flags & MMC_UHS2_SUPPORT) { + DBG("UHS2: End data transferring...\n"); + tasklet_schedule(&host->finish_tasklet); + return; + } + /* * Need to send CMD12 if - * a) open-ended multiblock transfer (no CMD23) @@ -1005,6 +1037,7 @@ static void sdhci_finish_data(struct sdhci_host *host) } else tasklet_schedule(&host->finish_tasklet); } +EXPORT_SYMBOL_GPL(sdhci_finish_data); void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) { @@ -1051,8 +1084,6 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) sdhci_prepare_data(host, cmd); - sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); - sdhci_set_transfer_mode(host, cmd); if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { @@ -1082,6 +1113,13 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200) flags |= SDHCI_CMD_DATA; + if (host->mmc->flags & MMC_UHS2_SUPPORT) { + sdhci_uhs2_send_command(host, cmd); + return; + } + + sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); + sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); } EXPORT_SYMBOL_GPL(sdhci_send_command); @@ -1092,7 +1130,9 @@ static void sdhci_finish_command(struct sdhci_host *host) BUG_ON(host->cmd == NULL); - if (host->cmd->flags & MMC_RSP_PRESENT) { + if (host->mmc->flags & MMC_UHS2_SUPPORT) + sdhci_uhs2_finish_command(host); + else if (host->cmd->flags & MMC_RSP_PRESENT) { if (host->cmd->flags & MMC_RSP_136) { /* CRC is stripped so we need to do some shifting. */ for (i = 0;i < 4;i++) { @@ -1151,6 +1191,9 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host) case MMC_TIMING_MMC_HS400: preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400); break; + case MMC_TIMING_UHS2: + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2); + break; default: pr_warn("%s: Invalid UHS-I mode selected\n", mmc_hostname(host->mmc)); @@ -1160,12 +1203,32 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host) return preset; } +static bool sdhci_wait_clock_stable(struct sdhci_host *host) +{ + u16 clk = 0; + unsigned long timeout; + + /* Wait max 20 ms */ + timeout = 2000; + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return false; + } + timeout--; + udelay(10); + } + return true; +} + void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { int div = 0; /* Initialized for compiler warning */ int real_div = div, clk_mul = 1; u16 clk = 0; - unsigned long timeout; host->mmc->actual_clock = 0; @@ -1244,18 +1307,21 @@ clock_set: clk |= SDHCI_CLOCK_INT_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); - /* Wait max 20 ms */ - timeout = 20; - while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) - & SDHCI_CLOCK_INT_STABLE)) { - if (timeout == 0) { - pr_err("%s: Internal clock never " - "stabilised.\n", mmc_hostname(host->mmc)); - sdhci_dumpregs(host); + if (false == sdhci_wait_clock_stable(host)) { + pr_err("%s: clock failed to be stable.\n", + mmc_hostname(host->mmc)); + return; + } + + if (host->version >= SDHCI_SPEC_400 && + sdhci_readw(host, SDHCI_HOST_CONTROL2) & SDHCI_CTRL_HOST_4_EN) { + clk |= SDHCI_PLL_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + if (false == sdhci_wait_clock_stable(host)) { + pr_err("%s: clock failed to be stable.\n", + mmc_hostname(host->mmc)); return; } - timeout--; - mdelay(1); } clk |= SDHCI_CLOCK_CARD_EN; @@ -1263,8 +1329,8 @@ clock_set: } EXPORT_SYMBOL_GPL(sdhci_set_clock); -static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, - unsigned short vdd) +void sdhci_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd, unsigned short vdd2) { struct mmc_host *mmc = host->mmc; u8 pwr = 0; @@ -1272,6 +1338,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, if (!IS_ERR(mmc->supply.vmmc)) { spin_unlock_irq(&host->lock); mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + if (mmc->caps & MMC_CAP_UHS2 && + !IS_ERR(mmc->supply.vmmc2)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, vdd2); spin_lock_irq(&host->lock); return; } @@ -1294,6 +1363,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, } } + if (vdd2 != (unsigned short)-1) { + switch (1 << vdd2) { + case MMC_VDD2_165_195: + pwr |= SDHCI_VDD2_POWER_180; + break; + default: + BUG(); + } + } + if (host->pwr == pwr) return; @@ -1321,6 +1400,8 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); pwr |= SDHCI_POWER_ON; + if (vdd2 != (unsigned short)-1) + pwr |= SDHCI_VDD2_POWER_ON; sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); @@ -1335,6 +1416,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, mdelay(10); } } +EXPORT_SYMBOL_GPL(sdhci_set_power); /*****************************************************************************\ * * @@ -1488,6 +1570,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) { unsigned long flags; u8 ctrl; + u16 ctrl_2; struct mmc_host *mmc = host->mmc; spin_lock_irqsave(&host->lock, flags); @@ -1497,6 +1580,10 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) if (!IS_ERR(mmc->supply.vmmc) && ios->power_mode == MMC_POWER_OFF) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + if (host->mmc->caps & MMC_CAP_UHS2 && + !IS_ERR(mmc->supply.vmmc2) && + ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0); return; } @@ -1531,7 +1618,28 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) } } - sdhci_set_power(host, ios->power_mode, ios->vdd); + sdhci_set_power(host, ios->power_mode, ios->vdd, -1); + + /* 4.0 host support */ + if (host->version >= SDHCI_SPEC_400) { + /* Host Control 2 register */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl_2 |= SDHCI_CTRL_HOST_4_EN; + if (host->flags & SDHCI_USE_64_BIT_DMA) + ctrl_2 |= SDHCI_CTRL_ADDRESS_64_BIT; + /* TODO: shall we enable 26bit ADMA data length mode? */ + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + + /* UHS2 Support */ + if (host->mmc->flags & MMC_UHS2_SUPPORT && + host->mmc->caps & MMC_CAP_UHS2 && + host->mmc->ocr_avail_uhs2 & MMC_VDD2_165_195) { + spin_unlock_irqrestore(&host->lock, flags); + sdhci_uhs2_do_set_ios(host, ios); + spin_lock_irqsave(&host->lock, flags); + goto out; + } + } if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); @@ -1548,7 +1656,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) ctrl &= ~SDHCI_CTRL_HISPD; if (host->version >= SDHCI_SPEC_300) { - u16 clk, ctrl_2; + u16 clk; /* In case of UHS-I modes, set High Speed Enable */ if ((ios->timing == MMC_TIMING_MMC_HS400) || @@ -1628,6 +1736,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); +out: mmiowb(); spin_unlock_irqrestore(&host->lock, flags); } @@ -1776,8 +1885,12 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, /* * Signal Voltage Switching is only applicable for Host Controllers * v3.00 and above. + * But for UHS2, the signal voltage is supplied by vdd2 which is + * already 1.8v so no voltage siwtch required. */ - if (host->version < SDHCI_SPEC_300) + if (host->version < SDHCI_SPEC_300 || + (host->version >= SDHCI_SPEC_400 && + host->flags & SDHCI_USE_UHS2)) return 0; ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); @@ -2077,7 +2190,7 @@ out: } -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) { /* Host Controller v3.00 defines preset value registers */ if (host->version < SDHCI_SPEC_300) @@ -2105,6 +2218,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable) host->preset_enabled = enable; } } +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value); static void sdhci_card_event(struct mmc_host *mmc) { @@ -2124,8 +2238,11 @@ static void sdhci_card_event(struct mmc_host *mmc) pr_err("%s: Resetting controller.\n", mmc_hostname(host->mmc)); - sdhci_do_reset(host, SDHCI_RESET_CMD); - sdhci_do_reset(host, SDHCI_RESET_DATA); + if (host->mmc->flags & MMC_UHS2_INITIALIZED) + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); + else + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); @@ -2134,6 +2251,30 @@ static void sdhci_card_event(struct mmc_host *mmc) spin_unlock_irqrestore(&host->lock, flags); } +static int sdhci_uhs2_detect_init(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_uhs2_do_detect_init(host); + sdhci_runtime_pm_put(host); + + return ret; +} + +static int sdhci_uhs2_set_reg(struct mmc_host *mmc, enum uhs2_act act) +{ + struct sdhci_host *host = mmc_priv(mmc); + int ret; + + sdhci_runtime_pm_get(host); + ret = sdhci_uhs2_do_set_reg(host, act); + sdhci_runtime_pm_put(host); + + return ret; +} + static const struct mmc_host_ops sdhci_ops = { .request = sdhci_request, .set_ios = sdhci_set_ios, @@ -2145,6 +2286,8 @@ static const struct mmc_host_ops sdhci_ops = { .execute_tuning = sdhci_execute_tuning, .card_event = sdhci_card_event, .card_busy = sdhci_card_busy, + .uhs2_detect_init = sdhci_uhs2_detect_init, + .uhs2_set_reg = sdhci_uhs2_set_reg, }; /*****************************************************************************\ @@ -2192,10 +2335,14 @@ static void sdhci_tasklet_finish(unsigned long param) /* This is to force an update */ host->ops->set_clock(host, host->clock); - /* Spec says we should do both at the same time, but Ricoh - controllers do not like that. */ - sdhci_do_reset(host, SDHCI_RESET_CMD); - sdhci_do_reset(host, SDHCI_RESET_DATA); + if (host->mmc->flags & MMC_UHS2_INITIALIZED) + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); + else { + /* Spec says we should do both at the same time, but + Ricoh controllers do not like that. */ + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + } } host->mrq = NULL; @@ -2496,6 +2643,11 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) DBG("*** %s got interrupt: 0x%08x\n", mmc_hostname(host->mmc), intmask); + if (intmask & SDHCI_INT_ERROR && + host->mmc->flags & MMC_UHS2_SUPPORT) { + sdhci_uhs2_irq(host); + } + if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT; @@ -2717,13 +2869,14 @@ static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) pm_runtime_get_noresume(host->mmc->parent); } -static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) +void sdhci_runtime_pm_bus_off(struct sdhci_host *host) { if (host->runtime_suspended || !host->bus_on) return; host->bus_on = false; pm_runtime_put_noidle(host->mmc->parent); } +EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_off); int sdhci_runtime_suspend_host(struct sdhci_host *host) { @@ -2847,12 +3000,13 @@ int sdhci_add_host(struct sdhci_host *host) override_timeout_clk = host->timeout_clk; + /* TODO: shall I reset UHS2 here? */ sdhci_do_reset(host, SDHCI_RESET_ALL); host->version = sdhci_readw(host, SDHCI_HOST_VERSION); host->version = (host->version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (host->version > SDHCI_SPEC_300) { + if (host->version > SDHCI_SPEC_410) { pr_err("%s: Unknown controller version (%d). " "You may experience problems.\n", mmc_hostname(mmc), host->version); @@ -2866,6 +3020,13 @@ int sdhci_add_host(struct sdhci_host *host) host->caps1 : sdhci_readl(host, SDHCI_CAPABILITIES_1); + if (host->version >= SDHCI_SPEC_400) { + if (caps[1] & SDHCI_SUPPORT_UHS2) { + mmc->caps |= MMC_CAP_UHS2; + mmc->flags |= MMC_UHS2_SUPPORT; + } + } + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; else if (!(caps[0] & SDHCI_CAN_DO_SDMA)) @@ -3302,6 +3463,9 @@ int sdhci_add_host(struct sdhci_host *host) */ mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; + if (host->version >= SDHCI_SPEC_400) + sdhci_uhs2_add_host(host, caps[1]); + /* * Init tasklets. */ @@ -3365,6 +3529,8 @@ int sdhci_add_host(struct sdhci_host *host) #ifdef SDHCI_USE_LEDS_CLASS reset: + /* TODO: shall I reset UHS2 and clear UHS2 irq here? */ + sdhci_uhs2_remove_host(host, 0); sdhci_do_reset(host, SDHCI_RESET_ALL); sdhci_writel(host, 0, SDHCI_INT_ENABLE); sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); @@ -3407,8 +3573,11 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) led_classdev_unregister(&host->led); #endif - if (!dead) + sdhci_uhs2_remove_host(host, dead); + + if (!dead) { sdhci_do_reset(host, SDHCI_RESET_ALL); + } sdhci_writel(host, 0, SDHCI_INT_ENABLE); sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 41a2c34..75091ee 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -4,6 +4,7 @@ * Header file for Host Controller registers and I/O accessors. * * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * Copyright (C) 2014 Intel Corp, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,13 +25,18 @@ * Controller registers */ -#define SDHCI_DMA_ADDRESS 0x00 +#define SDHCI_DMA_ADDRESS 0x00 /* Host version less than 4.0 */ #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS +/* + * 32bit Block Count register is only selected when Host Version Enable + * is set to 4 and 16bit Block Count register is set to zero. + */ +#define SDHCI_32B_BLOCK_COUNT SDHCI_DMA_ADDRESS /* Host version is 4.0 */ #define SDHCI_BLOCK_SIZE 0x04 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) -#define SDHCI_BLOCK_COUNT 0x06 +#define SDHCI_BLOCK_COUNT 0x06 /* 16bit Block Count */ #define SDHCI_ARGUMENT 0x08 @@ -39,11 +45,34 @@ #define SDHCI_TRNS_BLK_CNT_EN 0x02 #define SDHCI_TRNS_AUTO_CMD12 0x04 #define SDHCI_TRNS_AUTO_CMD23 0x08 +/* + * Since Version 4.10, use of Auto CMD Auto Select is recommended rather + * than use of Auto CMD12 Enable or Auto CMD23 Enable. + * Selection of Auto CMD depends on setting of CMD23 Enable in the Host + * Control 2 register. + */ +#define SDHCI_TRNS_AUTO_CMD_AUTO_SEL 0x0C #define SDHCI_TRNS_READ 0x10 #define SDHCI_TRNS_MULTI 0x20 +/* + * Defined in Host Version 4.10. + * 1 - R5 (SDIO) + * 0 - R1 (Memory) + */ +#define SDHCI_TRNS_RES_TYPE 0x40 +#define SDHCI_TRNS_RES_ERR_CHECK 0x80 +#define SDHCI_TRNS_RES_INT_DIS 0x0100 #define SDHCI_COMMAND 0x0E #define SDHCI_CMD_RESP_MASK 0x03 +/* + * Host Version 4.10 adds this bit to distinguish a main command or + * sub command. + * CMD53(SDIO) - main command + * CMD52(SDIO) - sub command which doesn't have data block or doesn't + * indicate busy. + */ +#define SDHCI_CMD_SUB_CMD 0x04 #define SDHCI_CMD_CRC 0x08 #define SDHCI_CMD_INDEX 0x10 #define SDHCI_CMD_DATA 0x20 @@ -58,12 +87,17 @@ #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) #define SDHCI_RESPONSE 0x10 +#define SDHCI_RESPONSE_CM_TRAN_ABORT_OFFSET 0x10 +#define SDHCI_RESPONSE_CM_TRAN_ABORT_SIZE 4 +#define SDHCI_RESPONSE_SD_TRAN_ABORT_OFFSET 0x18 +#define SDHCI_RESPONSE_SD_TRAN_ABORT_SIZE 8 #define SDHCI_BUFFER 0x20 #define SDHCI_PRESENT_STATE 0x24 #define SDHCI_CMD_INHIBIT 0x00000001 #define SDHCI_DATA_INHIBIT 0x00000002 +#define SDHCI_DATA_HIGH_LVL_MASK 0x000000F0 #define SDHCI_DOING_WRITE 0x00000100 #define SDHCI_DOING_READ 0x00000200 #define SDHCI_SPACE_AVAILABLE 0x00000400 @@ -73,6 +107,12 @@ #define SDHCI_DATA_LVL_MASK 0x00F00000 #define SDHCI_DATA_LVL_SHIFT 20 #define SDHCI_DATA_0_LVL_MASK 0x00100000 +#define SDHCI_HOST_REGULATOR_STABLE 0x02000000 +#define SDHCI_CMD_NOT_ISSUE_ERR 0x08000000 +#define SDHCI_SUB_CMD_STATUS 0x10000000 +#define SDHCI_UHS2_IN_DORMANT_STATE 0x20000000 +#define SDHCI_UHS2_LANE_SYNC 0x40000000 +#define SDHCI_UHS2_IF_DETECT 0x80000000 #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 @@ -90,6 +130,10 @@ #define SDHCI_POWER_180 0x0A #define SDHCI_POWER_300 0x0C #define SDHCI_POWER_330 0x0E +/* VDD2 - UHS2 */ +#define SDHCI_VDD2_POWER_ON 0x10 +#define SDHCI_VDD2_POWER_180 0xA0 +#define SDHCI_VDD2_POWER_120 0x80 #define SDHCI_BLOCK_GAP_CONTROL 0x2A @@ -105,6 +149,7 @@ #define SDHCI_DIV_MASK_LEN 8 #define SDHCI_DIV_HI_MASK 0x300 #define SDHCI_PROG_CLOCK_MODE 0x0020 +#define SDHCI_PLL_EN 0x0008 #define SDHCI_CLOCK_CARD_EN 0x0004 #define SDHCI_CLOCK_INT_STABLE 0x0002 #define SDHCI_CLOCK_INT_EN 0x0001 @@ -128,6 +173,8 @@ #define SDHCI_INT_CARD_INSERT 0x00000040 #define SDHCI_INT_CARD_REMOVE 0x00000080 #define SDHCI_INT_CARD_INT 0x00000100 +/* Host Version 4.10 */ +#define SDHCI_INT_FX_EVENT 0x00002000 #define SDHCI_INT_ERROR 0x00008000 #define SDHCI_INT_TIMEOUT 0x00010000 #define SDHCI_INT_CRC 0x00020000 @@ -139,6 +186,8 @@ #define SDHCI_INT_BUS_POWER 0x00800000 #define SDHCI_INT_ACMD12ERR 0x01000000 #define SDHCI_INT_ADMA_ERROR 0x02000000 +/* Host Version 4.0 */ +#define SDHCI_INT_RESPONSE_ERROR 0x08000000 #define SDHCI_INT_NORMAL_MASK 0x00007FFF #define SDHCI_INT_ERROR_MASK 0xFFFF8000 @@ -153,6 +202,8 @@ #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C +/* Host Version 4.10 */ +#define SDHCI_ACMD_RESPONSE_ERROR 0x0020 #define SDHCI_HOST_CONTROL2 0x3E #define SDHCI_CTRL_UHS_MASK 0x0007 @@ -162,14 +213,23 @@ #define SDHCI_CTRL_UHS_SDR104 0x0003 #define SDHCI_CTRL_UHS_DDR50 0x0004 #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ -#define SDHCI_CTRL_VDD_180 0x0008 -#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 +/* UHS2 */ +#define SDHCI_CTRL_UHS_2 0x0007 +#define SDHCI_CTRL_VDD_180 0x0008 /* UHS-I only */ +#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 /* UHS-I only */ #define SDHCI_CTRL_DRV_TYPE_B 0x0000 #define SDHCI_CTRL_DRV_TYPE_A 0x0010 #define SDHCI_CTRL_DRV_TYPE_C 0x0020 #define SDHCI_CTRL_DRV_TYPE_D 0x0030 -#define SDHCI_CTRL_EXEC_TUNING 0x0040 -#define SDHCI_CTRL_TUNED_CLK 0x0080 +#define SDHCI_CTRL_EXEC_TUNING 0x0040 /* UHS-I only */ +#define SDHCI_CTRL_TUNED_CLK 0x0080 /* UHS-I only */ +/* UHS2 */ +#define SDHCI_CTRL_UHS2_INTERFACE_EN 0x0100 +#define SDHCI_CTRL_ADMA2_LEN_MODE 0x0400 +#define SDHCI_CTRL_CMD23_EN 0x0800 +#define SDHCI_CTRL_HOST_4_EN 0x1000 +#define SDHCI_CTRL_ADDRESS_64_BIT 0x2000 +#define SDHCI_CTRL_ASYNC_INT_EN 0x4000 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 #define SDHCI_CAPABILITIES 0x40 @@ -189,7 +249,10 @@ #define SDHCI_CAN_VDD_330 0x01000000 #define SDHCI_CAN_VDD_300 0x02000000 #define SDHCI_CAN_VDD_180 0x04000000 +/* Host Version 4.10 */ +#define SDHCI_CAN_64BIT_V4 0x08000000 #define SDHCI_CAN_64BIT 0x10000000 +#define SDHCI_CAN_ASYNC_INT 0x20000000 #define SDHCI_SUPPORT_SDR50 0x00000001 #define SDHCI_SUPPORT_SDR104 0x00000002 @@ -204,11 +267,17 @@ #define SDHCI_RETUNING_MODE_SHIFT 14 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 #define SDHCI_CLOCK_MUL_SHIFT 16 +/* UHS2 */ +#define SDHCI_SUPPORT_VDD2_180 0x10000000 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ #define SDHCI_CAPABILITIES_1 0x44 +/* UHS2 */ +#define SDHCI_SUPPORT_UHS2 0x00000008 +#define SDHCI_CAN_DO_ADMA3 0x08000000 #define SDHCI_MAX_CURRENT 0x48 +#define SDHCI_MAX_CURRENT_1 0x4C #define SDHCI_MAX_CURRENT_LIMIT 0xFF #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF #define SDHCI_MAX_CURRENT_330_SHIFT 0 @@ -216,12 +285,19 @@ #define SDHCI_MAX_CURRENT_300_SHIFT 8 #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000 #define SDHCI_MAX_CURRENT_180_SHIFT 16 +/* UHS2 */ +#define SDHCI_MAX_CURRENT_VDD2_180_MASK 0x0000000FF #define SDHCI_MAX_CURRENT_MULTIPLIER 4 /* 4C-4F reserved for more max current */ #define SDHCI_SET_ACMD12_ERROR 0x50 +/* Host Version 4.10 */ +#define SDHCI_SET_ACMD_RESPONSE_ERROR 0x20 #define SDHCI_SET_INT_ERROR 0x52 +/* Host Version 4.10 */ +#define SDHCI_SET_INT_TUNING_ERROR 0x0400 +#define SDHCI_SET_INT_RESPONSE_ERROR 0x0800 #define SDHCI_ADMA_ERROR 0x54 @@ -237,7 +313,10 @@ #define SDHCI_PRESET_FOR_SDR50 0x6A #define SDHCI_PRESET_FOR_SDR104 0x6C #define SDHCI_PRESET_FOR_DDR50 0x6E +/* TODO: 0x74 is used for UHS2 in 4.10. How about HS400? */ #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ +/* UHS2 */ +#define SDHCI_PRESET_FOR_UHS2 0x74 #define SDHCI_PRESET_DRV_MASK 0xC000 #define SDHCI_PRESET_DRV_SHIFT 14 #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 @@ -245,6 +324,219 @@ #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 +#define SDHCI_ADMA3_ADDRESS 0x78 + +/* UHS-II */ +#define SDHCI_UHS2_BLOCK_SIZE 0x80 +#define SDHCI_UHS2_MAKE_BLKSZ(dma, blksz) \ + (((dma & 0x7) << 12) | (blksz & 0xFFF)) + +#define SDHCI_UHS2_BLOCK_COUNT 0x84 + +#define SDHCI_UHS2_CMD_PACKET 0x88 +#define SDHCI_UHS2_CMD_PACK_MAX_LEN 20 + +#define SDHCI_UHS2_TRANS_MODE 0x9C +#define SDHCI_UHS2_TRNS_DMA 0x0001 +#define SDHCI_UHS2_TRNS_BLK_CNT_EN 0x0002 +#define SDHCI_UHS2_TRNS_DATA_TRNS_WRT 0x0010 +#define SDHCI_UHS2_TRNS_BLK_BYTE_MODE 0x0020 +#define SDHCI_UHS2_TRNS_RES_R5 0x0040 +#define SDHCI_UHS2_TRNS_RES_ERR_CHECK_EN 0x0080 +#define SDHCI_UHS2_TRNS_RES_INT_DIS 0x0100 +#define SDHCI_UHS2_TRNS_WAIT_EBSY 0x4000 +#define SDHCI_UHS2_TRNS_2L_HD 0x8000 + +#define SDHCI_UHS2_COMMAND 0x9E +#define SDHCI_UHS2_COMMAND_SUB_CMD 0x0004 +#define SDHCI_UHS2_COMMAND_DATA 0x0020 +#define SDHCI_UHS2_COMMAND_TRNS_ABORT 0x0040 +#define SDHCI_UHS2_COMMAND_CMD12 0x0080 +#define SDHCI_UHS2_COMMAND_DORMANT 0x00C0 +#define SDHCI_UHS2_COMMAND_PACK_LEN_MASK 0x1F00 +#define SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT 8 + +#define SDHCI_UHS2_RESPONSE 0xA0 +#define SDHCI_UHS2_RESPONSE_MAX_LEN 20 + +#define SDHCI_UHS2_MSG_SELECT 0xB4 +#define SDHCI_UHS2_MSG_SELECT_CURR 0x0 +#define SDHCI_UHS2_MSG_SELECT_ONE 0x1 +#define SDHCI_UHS2_MSG_SELECT_TWO 0x2 +#define SDHCI_UHS2_MSG_SELECT_THREE 0x3 + +#define SDHCI_UHS2_MSG 0xB8 + +#define SDHCI_UHS2_DEV_INT_STATUS 0xBC + +#define SDHCI_UHS2_DEV_SELECT 0xBE +#define SDHCI_UHS2_DEV_SELECT_DEV_SEL_MASK 0x0F +#define SDHCI_UHS2_DEV_SELECT_INT_MSG_EN 0x80 + +#define SDHCI_UHS2_DEV_INT_CODE 0xBF + +#define SDHCI_UHS2_SW_RESET 0xC0 +#define SDHCI_UHS2_SW_RESET_FULL 0x0001 +#define SDHCI_UHS2_SW_RESET_SD 0x0002 + +#define SDHCI_UHS2_TIMER_CTRL 0xC2 +#define SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT 4 + +#define SDHCI_UHS2_ERR_INT_STATUS 0xC4 +#define SDHCI_UHS2_ERR_INT_STATUS_EN 0xC8 +#define SDHCI_UHS2_ERR_INT_SIG_EN 0xCC +#define SDHCI_UHS2_ERR_INT_STATUS_HEADER 0x00000001 +#define SDHCI_UHS2_ERR_INT_STATUS_RES 0x00000002 +#define SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP 0x00000004 +#define SDHCI_UHS2_ERR_INT_STATUS_CRC 0x00000008 +#define SDHCI_UHS2_ERR_INT_STATUS_FRAME 0x00000010 +#define SDHCI_UHS2_ERR_INT_STATUS_TID 0x00000020 +#define SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER 0x00000080 +#define SDHCI_UHS2_ERR_INT_STATUS_EBUSY 0x00000100 +#define SDHCI_UHS2_ERR_INT_STATUS_ADMA 0x00008000 +#define SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT 0x00010000 +#define SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT 0x00020000 +#define SDHCI_UHS2_ERR_INT_STATUS_VENDOR 0x08000000 +#define SDHCI_UHS2_ERR_INT_STATUS_MASK \ + (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \ + SDHCI_UHS2_ERR_INT_STATUS_RES | \ + SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \ + SDHCI_UHS2_ERR_INT_STATUS_CRC | \ + SDHCI_UHS2_ERR_INT_STATUS_FRAME | \ + SDHCI_UHS2_ERR_INT_STATUS_TID | \ + SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \ + SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \ + SDHCI_UHS2_ERR_INT_STATUS_ADMA | \ + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT | \ + SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) +#define SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK \ + (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \ + SDHCI_UHS2_ERR_INT_STATUS_RES | \ + SDHCI_UHS2_ERR_INT_STATUS_FRAME | \ + SDHCI_UHS2_ERR_INT_STATUS_TID | \ + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT) +/* TODO: CRC is for data or cmd? */ +#define SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK \ + (SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \ + SDHCI_UHS2_ERR_INT_STATUS_CRC | \ + SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \ + SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \ + SDHCI_UHS2_ERR_INT_STATUS_ADMA | \ + SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) + +#define SDHCI_UHS2_SET_PTR 0xE0 +#define SDHCI_UHS2_GEN_SET (SDHCI_UHS2_SET_PTR + 0) +#define SDHCI_UHS2_GEN_SET_POWER_LOW 0x0001 +#define SDHCI_UHS2_GEN_SET_N_LANES_POS 8 +#define SDHCI_UHS2_GEN_SET_2L_FD_HD 0x0 +#define SDHCI_UHS2_GEN_SET_2D1U_FD 0x2 +#define SDHCI_UHS2_GEN_SET_1D2U_FD 0x3 +#define SDHCI_UHS2_GEN_SET_2D2U_FD 0x4 + +#define SDHCI_UHS2_PHY_SET (SDHCI_UHS2_SET_PTR + 4) +#define SDHCI_UHS2_PHY_SET_SPEED_POS 6 +#define SDHCI_UHS2_PHY_SET_HIBER_EN 0x00008000 +#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_MASK 0x000F0000 +#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS 16 +#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_MASK 0x00F00000 +#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS 20 + +#define SDHCI_UHS2_TRAN_SET (SDHCI_UHS2_SET_PTR + 8) +#define SDHCI_UHS2_TRAN_SET_N_FCU_MASK 0x0000FF00 +#define SDHCI_UHS2_TRAN_SET_N_FCU_POS 8 +#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_MASK 0x00030000 +#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS 16 + +#define SDHCI_UHS2_TRAN_SET_1 (SDHCI_UHS2_SET_PTR + 12) +#define SDHCI_UHS2_TRAN_SET_1_N_DAT_GAP_MASK 0x000000FF + +#define SDHCI_UHS2_HOST_CAPS_PTR 0xE2 +#define SDHCI_UHS2_HOST_CAPS_GEN_OFFSET 0 +#define SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK 0x0000000F +#define SDHCI_UHS2_HOST_CAPS_GEN_DAP(dap) ({ \ + if (dap == 0) \ + return 360; \ + else \ + return dap * 360; }) +#define SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK 0x000000F0 +#define SDHCI_UHS2_HOST_CAPS_GEN_GAP(gap) (gap * 360) +#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK 0x00003F00 +#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT 8 +#define SDHCI_UHS2_HOST_CAPS_GEN_2L_HD_FD 1 +#define SDHCI_UHS2_HOST_CAPS_GEN_2D1U_FD 2 +#define SDHCI_UHS2_HOST_CAPS_GEN_1D2U_FD 4 +#define SDHCI_UHS2_HOST_CAPS_GEN_2D2U_FD 8 +#define SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64 0x00004000 +#define SDHCI_UHS2_HOST_CAPS_GEN_BOOT 0x00008000 +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK 0x00030000 +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT 16 +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_RMV 0 +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB 1 +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB_RMV 2 +#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_MASK 0x003C0000 +#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_SHIFT 18 +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_MASK 0x00C00000 +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_SHIFT 22 +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_P2P 0 +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_RING 1 +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB 2 +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB_RING 3 + +#define SDHCI_UHS2_HOST_CAPS_PHY_OFFSET 4 +#define SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK 0x0000003F +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK 0x000000C0 +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT 6 +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_A 0 +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_B 1 +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK 0x000F0000 +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT 16 +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN(n_lss) ({ \ + if (n_lss == 0) \ + return 16 * 4; \ + else \ + return n_lss * 4; }) +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK 0x00F00000 +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT 20 +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR(n_lss) ({ \ + if (n_lss == 0) \ + return 16 * 8; \ + else \ + return n_lss * 8; }) + +#define SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET 8 +#define SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK 0x0000003F +#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK 0x0000FF00 +#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT 8 +#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU(n_fcu) ({ \ + if (n_fcu == 0) \ + return 256; \ + else \ + return n_fcu; }) +#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK 0x00070000 +#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT 16 +#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK 0xFFF00000 +#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT 20 + +#define SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET 12 +#define SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK 0x000000FF + +#define SDHCI_UHS2_TEST_PTR 0xE4 +#define SDHCI_UHS2_TEST_ERR_HEADER 0x00000001 +#define SDHCI_UHS2_TEST_ERR_RES 0x00000002 +#define SDHCI_UHS2_TEST_ERR_RETRY_EXP 0x00000004 +#define SDHCI_UHS2_TEST_ERR_CRC 0x00000008 +#define SDHCI_UHS2_TEST_ERR_FRAME 0x00000010 +#define SDHCI_UHS2_TEST_ERR_TID 0x00000020 +#define SDHCI_UHS2_TEST_ERR_UNRECOVER 0x00000080 +#define SDHCI_UHS2_TEST_ERR_EBUSY 0x00000100 +#define SDHCI_UHS2_TEST_ERR_ADMA 0x00008000 +#define SDHCI_UHS2_TEST_ERR_RES_TIMEOUT 0x00010000 +#define SDHCI_UHS2_TEST_ERR_DEADLOCK_TIMEOUT 0x00020000 +#define SDHCI_UHS2_TEST_ERR_VENDOR 0x08000000 + +#define SDHCI_UHS2_EMBED_CTRL 0xE6 +#define SDHCI_UHS2_VENDOR 0xE8 + #define SDHCI_SLOT_INT_STATUS 0xFC #define SDHCI_HOST_VERSION 0xFE @@ -255,6 +547,8 @@ #define SDHCI_SPEC_100 0 #define SDHCI_SPEC_200 1 #define SDHCI_SPEC_300 2 +#define SDHCI_SPEC_400 3 +#define SDHCI_SPEC_410 4 /* * End of controller registers. @@ -458,4 +752,11 @@ extern int sdhci_runtime_suspend_host(struct sdhci_host *host); extern int sdhci_runtime_resume_host(struct sdhci_host *host); #endif +/* sdhci_uhs2.c needed */ +extern void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); +extern void sdhci_dumpregs(struct sdhci_host *host); +extern void sdhci_finish_data(struct sdhci_host *); +extern void sdhci_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd, unsigned short vdd2); +extern void sdhci_runtime_pm_bus_off(struct sdhci_host *host); #endif /* __SDHCI_HW_H */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 375af80..fc938fc 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -2,6 +2,7 @@ * linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface * * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * Copyright (C) 2014 Intel Corp, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -137,6 +138,7 @@ struct sdhci_host { #define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ #define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ +#define SDHCI_USE_UHS2 (1<<13) /* Support UHS2 */ unsigned int version; /* SDHCI spec. version */