[v2,2/2] mmc: sdhci-esdhc-imx: Do not break platform data boards

Commit Message

Fabio Estevam May 9, 2015, 12:57 p.m. UTC

From: Fabio Estevam <[e-mail]>

The only user of this driver that has not been converted to fully
device tree is the i.MX35 SoC.

There is a i.MX35-based board (mach-pcm043.c) that uses platform data
to pass wp_gpio and cd_gpio information.

Commit 8d86e4fcccf61ba ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()")
broke the platform data case by removing mmc_gpio_request_ro() and
mmc_gpio_request_cd(), so restore the functionality for the non-dt
case.

Also, restore the check for ESDHC_CD_CONTROLLER so that we can still
support the "fsl,cd-controller" property.

Signed-off-by: Fabio Estevam <[e-mail]>
---
Changes since v1:
- Add info in the commitlog about the need of keeping the check for the
ESDHC_CD_CONTROLLER case as suggested by Ulf.

 drivers/mmc/host/sdhci-esdhc-imx.c | 36 +++++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index a9980d7..812c670 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -918,6 +918,7 @@  static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	struct esdhc_platform_data *boarddata;
 	int err;
 	struct pltfm_imx_data *imx_data;
+	bool dt = true;
 
 	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0);
 	if (IS_ERR(host))
@@ -1005,11 +1006,44 @@  static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		}
 		imx_data->boarddata = *((struct esdhc_platform_data *)
 					host->mmc->parent->platform_data);
+		dt = false;
+	}
+	/* write_protect */
+	if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) {
+		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
+		if (err) {
+			dev_err(mmc_dev(host->mmc),
+				"failed to request write-protect gpio!\n");
+			goto disable_clk;
+		}
+		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 	}
 
 	/* card_detect */
-	if (boarddata->cd_type == ESDHC_CD_CONTROLLER)
+	switch (boarddata->cd_type) {
+	case ESDHC_CD_GPIO:
+		if (dt)
+			break;
+		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
+		if (err) {
+			dev_err(mmc_dev(host->mmc),
+				"failed to request card-detect gpio!\n");
+			goto disable_clk;
+		}
+		/* fall through */
+
+	case ESDHC_CD_CONTROLLER:
+		/* we have a working card_detect back */
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+		break;
+
+	case ESDHC_CD_PERMANENT:
+		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+		break;
+
+	case ESDHC_CD_NONE:
+		break;
+	}
 
 	switch (boarddata->max_bus_width) {
 	case 8: