| Message ID | 1434792165-10174-1-git-send-email-carlo@caione.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Carlo, Let me start by apologizing for the delayed reply! On 20 June 2015 at 11:22, Carlo Caione <carlo@caione.org> wrote: > From: Carlo Caione <carlo@endlessm.com> > > Add a driver for the SD/MMC host found on the Amlogic MesonX SoCs. It > is an MMC controller which provides an interface between the > application processor and various memory cards. It supports the SD > specification v2.0 and the eMMC specification v4.41. It also supports > SDSC, SDHC and SDXC memory card default speed. > > This patch adds also the binding documentation. > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > > Changelog: > > v2: > * fix typo in commit message > * avoid the bounce buffer (max_segs == 1) > > v3: > * simplify meson_mmc_map_dma() and fix memory leak > --- > .../devicetree/bindings/mmc/meson-mmc.txt | 38 ++ > drivers/mmc/host/Kconfig | 7 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/meson-mmc.c | 626 +++++++++++++++++++++ > 4 files changed, 672 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/meson-mmc.txt > create mode 100644 drivers/mmc/host/meson-mmc.c > > diff --git a/Documentation/devicetree/bindings/mmc/meson-mmc.txt b/Documentation/devicetree/bindings/mmc/meson-mmc.txt > new file mode 100644 > index 0000000..839569a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/meson-mmc.txt > @@ -0,0 +1,38 @@ > +* Amlogic MesonX MMC controller > + > +The highspeed MMC host controller on Amlogic SoCs provides an interface > +for MMC, SD, SDIO and SDHC types of memory cards. > + > +Supported maximum speeds are the ones of the eMMC standard 4.41 as well > +as the speed of SD standard 2.0. > + > +Required properties: > + - compatible : "amlogic,meson-mmc" > + - reg : mmc controller base registers > + - interrupts : mmc controller interrupt > + - clocks : phandle to SDIO clock provider SDIO clock? Specific for the SDIO as in the SDIO spec? > + > +Optional properties: > + - meson,sdio-port : 0 for SDIO port A, 1 for SDIO port B. (default: 0) Could you elaborate a bit on this. Will you ever use both ports simultaneously? And why do you call them SDIO ports? > + - for cd, bus-width and additional generic mmc parameters > + please refer to mmc.txt within this directory > + > +Examples: > + - Within .dtsi: If some configuration are related to the SoC/MMC-controller and some are board specific, let's describe that for each binding. Then you don't need to state which kind of DT file those should remain in. > + mmc0: mmc@c1108c20 { > + compatible = "amlogic,meson-mmc"; > + reg = <0xc1108c20 0x20>; > + interrupts = <0 28 1>; > + clocks = <&clkc CLKID_CLK81>; > + status = "disabled"; > + }; > + > + - Within .dts: Same comment as above. > + &mmc0 { > + status = "okay"; > + pinctrl-0 = <&mmc0_sd_b_pins>; > + pinctrl-names = "default"; > + meson,sdio-port = <1>; > + cd-gpios = <&gpio CARD_6 0>; > + cd-inverted; > + }; > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index b1f837e..e61b8d6 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -764,6 +764,13 @@ config MMC_REALTEK_USB > Say Y here to include driver code to support SD/MMC card interface > of Realtek RTS5129/39 series card reader > > +config MMC_MESON > + tristate "Amlogic MesonX SD/MMC Host Controller support" > + depends on ARCH_MESON > + help > + This selects support for the SD/MMC Host Controller on > + Amlogic MesonX SoCs. > + > config MMC_SUNXI > tristate "Allwinner sunxi SD/MMC Host Controller support" > depends on ARCH_SUNXI > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index e3ab5b9..c0455e7 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -53,6 +53,7 @@ obj-$(CONFIG_MMC_VUB300) += vub300.o > obj-$(CONFIG_MMC_USHC) += ushc.o > obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o > obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o > +obj-$(CONFIG_MMC_MESON) += meson-mmc.o > obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o > obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o > obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o > diff --git a/drivers/mmc/host/meson-mmc.c b/drivers/mmc/host/meson-mmc.c > new file mode 100644 > index 0000000..81a050e > --- /dev/null > +++ b/drivers/mmc/host/meson-mmc.c > @@ -0,0 +1,626 @@ > +/* > + * mesonsd.c - Meson SDH Controller > + * > + * Copyright (C) 2015 Endless Mobile, Inc. > + * Author: Carlo Caione <carlo@endlessm.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or (at > + * your option) any later version. > + */ > + > +#define DRIVER_NAME "meson-mmc" > + > +#define DEBUG > + > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/dma-mapping.h> > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/ioport.h> > +#include <linux/platform_device.h> > + > +#include <linux/mmc/host.h> > +#include <linux/mmc/mmc.h> > +#include <linux/mmc/sdio.h> > +#include <linux/mmc/slot-gpio.h> > + > +#include <linux/of_address.h> > +#include <linux/of_gpio.h> > +#include <linux/of_platform.h> > + > +#define SDIO_ARGU (0x00) > +#define SDIO_SEND (0x04) > +#define SDIO_CONF (0x08) > +#define SDIO_IRQS (0x0c) > +#define SDIO_IRQC (0x10) > +#define SDIO_MULT (0x14) > +#define SDIO_ADDR (0x18) > +#define SDIO_EXT (0x1c) > + > +#define REG_IRQS_RESP_CRC7 BIT(5) > +#define REG_IRQS_RD_CRC16 BIT(6) > +#define REG_IRQS_WR_CRC16 BIT(7) > +#define REG_IRQS_CMD_INT BIT(9) > + > +#define REG_IRQC_ARC_CMD_INT BIT(4) > +#define REG_IRQC_SOFT_RESET BIT(15) > + > +#define REG_CONF_WR_CRC_S (29) > +#define REG_CONF_WR_NWR_S (23) > +#define REG_CONF_M_END_S (21) > +#define REG_CONF_ARGU_BITS_S (12) > +#define REG_CONF_CLK_DIV_M (0x3ff) > +#define REG_CONF_BUS_WIDTH BIT(20) > + > +#define REG_MULT_PORT_SEL_M (0x3) > +#define REG_MULT_RD_INDEX_M (0x0f) > +#define REG_MULT_RD_INDEX_S (12) > +#define REG_MULT_WR_RD_OUT_IND BIT(8) > + > +#define REG_SEND_CMD_COMMAND_M (0xff) > +#define REG_SEND_CMD_RESP_S (8) > +#define REG_SEND_RESP_NO_CRC7 BIT(16) > +#define REG_SEND_RESP_HAVE_DATA BIT(17) > +#define REG_SEND_RESP_CRC7_F_8 BIT(18) > +#define REG_SEND_CHECK_BUSY_D0 BIT(19) > +#define REG_SEND_CMD_SEND_DATA BIT(20) > +#define REG_SEND_REP_PACK_N_M (0xff) > +#define REG_SEND_REP_PACK_N_S (24) > + > +#define REG_EXT_DAT_RW_NUM_M (0x3fff) > +#define REG_EXT_DAT_RW_NUM_S (16) > + > +#define CLK_DIV (0x1f4) > + > +#define SDIO_BOUNCE_REQ_SIZE (128 * 1024) > + > +enum mmcif_state { > + STATE_IDLE, > + STATE_REQUEST, > + STATE_IOS, > + STATE_TIMEOUT, > + STATE_STOP, > +}; Hmm, I wonder if these states are really needed? Have you considered if protection of the host->mrq pointer within locks, would be sufficient instead of having a state machine? > + > +struct meson_mmc_host { > + struct mmc_host *mmc; > + struct mmc_request *mrq; > + struct delayed_work timeout_work; > + struct clk *clk_sdio; Do you have a specific clock for sdio? Moreover I think you are using "SDIO" and "sdio" from many places in the driver. It's a bit confusing as I guess you don't refer to the SDIO spec!? Please consider to use a different naming when applicable. > + spinlock_t lock; > + void __iomem *base; > + long timeout; > + int irq; > + int ferror; "ferror" why not "error"? > + unsigned int bus_width; > + unsigned int port; > + enum mmcif_state state; > +}; > + > +static int meson_mmc_clk_set_rate(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct meson_mmc_host *host = mmc_priv(mmc); > + unsigned long clk_rate; > + unsigned int clk_ios = ios->clock; > + unsigned int clk_div; > + u32 conf_reg; > + > + clk_rate = clk_get_rate(host->clk_sdio) / 2; > + if (clk_rate < 0) { > + dev_err(mmc_dev(mmc), "cannot get clock rate\n"); > + return -EINVAL; > + } > + > + clk_div = clk_rate / clk_ios - !(clk_rate % clk_ios); > + > + conf_reg = readl(host->base + SDIO_CONF); > + conf_reg &= ~REG_CONF_CLK_DIV_M; > + conf_reg |= clk_div; > + writel(conf_reg, host->base + SDIO_CONF); > + > + dev_dbg(mmc_dev(mmc), "clk_ios: %d, clk_div: %d, clk_rate: %ld\n", > + clk_ios, clk_div, clk_rate); > + > + return 0; > +} > + > +static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct meson_mmc_host *host = mmc_priv(mmc); > + u32 reg; > + > + if (host->state != STATE_IDLE) { > + dev_dbg(mmc_dev(mmc), "%s() rejected, state %u\n", > + __func__, host->state); > + return; > + } > + > + host->state = STATE_IOS; > + > + reg = readl(host->base + SDIO_CONF); > + > + switch (ios->bus_width) { > + case MMC_BUS_WIDTH_1: > + host->bus_width = 0; bus_width is already stored in the struct mmc_ios, could you use that instead? > + reg &= ~REG_CONF_BUS_WIDTH; > + dev_dbg(mmc_dev(mmc), "bus width: 1bit\n"); The mmc core provides information of the currently used ios settings via debugfs. I don't think you need to log this here as well. > + break; > + case MMC_BUS_WIDTH_4: > + host->bus_width = 1; > + reg |= REG_CONF_BUS_WIDTH; > + dev_dbg(mmc_dev(mmc), "bus width: 4bit\n"); > + break; > + case MMC_BUS_WIDTH_8: > + default: > + dev_err(mmc_dev(mmc), "SDIO controller doesn't support 8bit data bus\n"); SDIO controller? Should this be something like "the meson controller..." > + host->ferror = -EINVAL; > + return; > + } > + > + writel(reg, host->base + SDIO_CONF); > + > + if (ios->clock && ios->power_mode) > + host->ferror = meson_mmc_clk_set_rate(mmc, ios); > + > + host->state = STATE_IDLE; > +} > + > +static void meson_mmc_soft_reset(struct meson_mmc_host *host) > +{ > + u32 irqc; > + > + irqc = readl(host->base + SDIO_IRQC); > + irqc |= REG_IRQC_SOFT_RESET; > + writel(irqc, host->base + SDIO_IRQC); > + udelay(2); > +} > + > +static void meson_mmc_start_cmd(struct mmc_host *mmc, > + struct mmc_request *mrq) > +{ > + struct meson_mmc_host *host = mmc_priv(mmc); > + unsigned int pack_size; > + u32 irqc, irqs, mult; > + u32 send = 0; > + u32 ext = 0; > + > + switch (mmc_resp_type(mrq->cmd)) { > + case MMC_RSP_R1: > + case MMC_RSP_R1B: > + case MMC_RSP_R3: > + send |= (45 << REG_SEND_CMD_RESP_S); > + break; > + case MMC_RSP_R2: > + send |= (133 << REG_SEND_CMD_RESP_S); > + send |= REG_SEND_RESP_CRC7_F_8; > + break; > + default: > + break; > + } > + > + if (!(mrq->cmd->flags & MMC_RSP_CRC)) > + send |= REG_SEND_RESP_NO_CRC7; > + > + if (mrq->cmd->flags & MMC_RSP_BUSY) > + send |= REG_SEND_CHECK_BUSY_D0; > + > + if (mrq->data) { > + send &= ~(REG_SEND_REP_PACK_N_M << REG_SEND_REP_PACK_N_S); > + send |= ((mrq->data->blocks - 1) << REG_SEND_REP_PACK_N_S); > + > + ext &= ~(REG_EXT_DAT_RW_NUM_M << REG_EXT_DAT_RW_NUM_S); > + if (host->bus_width) > + pack_size = mrq->data->blksz * 8 + (16 - 1) * 4; > + else > + pack_size = mrq->data->blksz * 8 + (16 - 1); > + ext |= (pack_size << REG_EXT_DAT_RW_NUM_S); > + > + if (mrq->data->flags & MMC_DATA_WRITE) > + send |= REG_SEND_CMD_SEND_DATA; > + else > + send |= REG_SEND_RESP_HAVE_DATA; > + } > + > + send &= ~REG_SEND_CMD_COMMAND_M; > + send |= (0x40 | mrq->cmd->opcode); > + > + meson_mmc_soft_reset(host); > + > + irqc = readl(host->base + SDIO_IRQC); > + irqc |= REG_IRQC_ARC_CMD_INT; > + > + irqs = readl(host->base + SDIO_IRQS); > + irqs |= REG_IRQS_CMD_INT; > + > + mult = readl(host->base + SDIO_MULT); > + mult &= ~REG_MULT_PORT_SEL_M; > + mult |= host->port; > + mult |= (1 << 31); > + writel(mult, host->base + SDIO_MULT); > + writel(irqs, host->base + SDIO_IRQS); > + writel(irqc, host->base + SDIO_IRQC); > + > + writel(mrq->cmd->arg, host->base + SDIO_ARGU); > + writel(ext, host->base + SDIO_EXT); > + writel(send, host->base + SDIO_SEND); > +} > + > +static int meson_mmc_map_dma(struct meson_mmc_host *host, > + struct mmc_data *data, > + unsigned int flags) > +{ u32 i, dma_len; > + struct scatterlist *sg = data->sg; > + > + if (sg->offset & 3 || sg->length & 3) { > + dev_err(mmc_dev(host->mmc), > + "unaligned scatterlist: os %x length %d\n", > + sg->offset, sg->length); > + return -EINVAL; > + } > + > + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, > + ((data->flags & MMC_DATA_READ) ? > + DMA_FROM_DEVICE : DMA_TO_DEVICE)); > + if (dma_len == 0) { > + dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n"); > + return -ENOMEM; > + } > + > + return 0; > +} > + > +static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct meson_mmc_host *host = mmc_priv(mmc); > + struct mmc_command *cmd = mrq->cmd; > + struct mmc_data *data = mrq->data; > + unsigned long flags; > + int ret; > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (host->state != STATE_IDLE) { > + dev_dbg(mmc_dev(mmc), "%s() rejected, state %u\n", > + __func__, host->state); > + mrq->cmd->error = -EAGAIN; > + spin_unlock_irqrestore(&host->lock, flags); > + mmc_request_done(mmc, mrq); > + return; > + } > + > + if (host->ferror) { > + cmd->error = host->ferror; > + spin_unlock_irqrestore(&host->lock, flags); > + mmc_request_done(mmc, mrq); > + return; > + } > + > + dev_dbg(mmc_dev(mmc), "CMD%d(%08x) arg %x len %d flags %08x\n", > + cmd->opcode & 0x3f, cmd->opcode, cmd->arg, > + mrq->data ? mrq->data->blksz * mrq->data->blocks : 0, > + mrq->cmd->flags); > + > + /* Filter out CMD 5/52/53 */ > + if (cmd->opcode == SD_IO_SEND_OP_COND || > + cmd->opcode == SD_IO_RW_DIRECT || > + cmd->opcode == SD_IO_RW_EXTENDED) { > + dev_dbg(mmc_dev(host->mmc), "CMD%d not supported\n", > + cmd->opcode); > + cmd->error = -EINVAL; > + spin_unlock_irqrestore(&host->lock, flags); > + mmc_request_done(mmc, mrq); > + return; > + } I think it's time that we invent a new mmc host cap bit, which indicates whether the host supports the SDIO spec or not. Something like MMC_CAP_NO_SDIO, which then would tell the mmc core to not send SDIO specfic commands during initialization. I think it would speed up initialization as well. Typically your driver will set this new cap and thus you don't need the above validation. Does it make sense? > + > + host->state = STATE_REQUEST; > + > + if (data) { > + ret = meson_mmc_map_dma(host, data, data->flags); > + if (ret < 0) { > + dev_err(mmc_dev(mmc), "map DMA failed\n"); > + cmd->error = ret; > + data->error = ret; > + host->state = STATE_IDLE; > + spin_unlock_irqrestore(&host->lock, flags); > + mmc_request_done(mmc, mrq); > + return; > + } > + writel(sg_dma_address(data->sg), host->base + SDIO_ADDR); > + } > + > + host->mrq = mrq; > + schedule_delayed_work(&host->timeout_work, host->timeout); Perhaps you should schedule the timeout_work outside the spinlocks and after the meson_mmc_start_cmd() has been invoked!? > + meson_mmc_start_cmd(mmc, mrq); > + > + spin_unlock_irqrestore(&host->lock, flags); > +} > + > +static irqreturn_t meson_mmc_irq(int irq, void *data) > +{ > + struct meson_mmc_host *host = (void *) data; > + struct mmc_request *mrq = host->mrq; > + u32 irqs; > + > + irqs = readl(host->base + SDIO_IRQS); > + if (mrq && (irqs & REG_IRQS_CMD_INT)) > + return IRQ_WAKE_THREAD; > + > + return IRQ_HANDLED; > +} > + > +void meson_mmc_read_response(struct meson_mmc_host *host) > +{ > + struct mmc_command *cmd = host->mrq->cmd; > + u32 mult; > + int i, resp[4] = { 0 }; > + > + mult = readl(host->base + SDIO_MULT); > + mult |= REG_MULT_WR_RD_OUT_IND; > + mult &= ~(REG_MULT_RD_INDEX_M << REG_MULT_RD_INDEX_S); > + writel(mult, host->base + SDIO_MULT); > + > + if (cmd->flags & MMC_RSP_136) { > + for (i = 0; i <= 3; i++) > + resp[3 - i] = readl(host->base + SDIO_ARGU); > + cmd->resp[0] = (resp[0] << 8) | ((resp[1] >> 24) & 0xff); > + cmd->resp[1] = (resp[1] << 8) | ((resp[2] >> 24) & 0xff); > + cmd->resp[2] = (resp[2] << 8) | ((resp[3] >> 24) & 0xff); > + cmd->resp[3] = (resp[3] << 8); > + } else if (cmd->flags & MMC_RSP_PRESENT) { > + cmd->resp[0] = readl(host->base + SDIO_ARGU); > + } > +} > + > +struct mmc_command meson_mmc_cmd = { > + .opcode = MMC_STOP_TRANSMISSION, > + .flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC, > +}; > + > +struct mmc_request meson_mmc_stop = { > + .cmd = &meson_mmc_cmd, > +}; > + Both the above declartions isn't needed. See further comment below, where the "meson_mmc_stop" is used. > +static irqreturn_t meson_mmc_irq_thread(int irq, void *irq_data) > +{ > + struct meson_mmc_host *host = (void *) irq_data; > + struct mmc_data *data; > + unsigned long flags; > + struct mmc_request *mrq; > + u32 irqs, send; > + > + spin_lock_irqsave(&host->lock, flags); > + > + cancel_delayed_work_sync(&host->timeout_work); I don't think this a good idea as you are within spin_lock_irqsave(). > + mrq = host->mrq; > + data = mrq->data; > + > + if (!mrq) { > + spin_unlock_irqrestore(&host->lock, flags); > + return IRQ_HANDLED; > + } > + > + if (host->state == STATE_STOP) > + goto out; > + > + if (host->state != STATE_REQUEST) { > + dev_dbg(mmc_dev(host->mmc), "%s() rejected, state %u\n", > + __func__, host->state); > + mrq->cmd->error = -EAGAIN; > + goto out; > + } > + > + irqs = readl(host->base + SDIO_IRQS); > + send = readl(host->base + SDIO_SEND); > + > + mrq->cmd->error = 0; > + > + if (!data) { > + if (!((irqs & REG_IRQS_RESP_CRC7) || > + (send & REG_SEND_RESP_NO_CRC7))) > + mrq->cmd->error = -EILSEQ; > + else > + meson_mmc_read_response(host); > + } else { > + if (!((irqs & REG_IRQS_RD_CRC16) || > + (irqs & REG_IRQS_WR_CRC16))) { > + mrq->cmd->error = -EILSEQ; > + } else { > + data->bytes_xfered = data->blksz * data->blocks; > + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, > + ((data->flags & MMC_DATA_READ) ? > + DMA_FROM_DEVICE : DMA_TO_DEVICE)); > + > + if (mrq->stop) { > + host->state = STATE_STOP; > + meson_mmc_start_cmd(host->mmc, &meson_mmc_stop); mrq->stop already contains a struct mmc_command. I think you shall use that instead of you local copy in meson_mmc_stop. > + spin_unlock_irqrestore(&host->lock, flags); > + return IRQ_HANDLED; > + } > + } > + } > + > +out: > + host->state = STATE_IDLE; > + host->mrq = NULL; > + spin_unlock_irqrestore(&host->lock, flags); > + mmc_request_done(host->mmc, mrq); > + > + return IRQ_HANDLED; > +} > + > +static void meson_mmc_timeout(struct work_struct *work) > +{ > + struct meson_mmc_host *host = container_of(work, > + struct meson_mmc_host, > + timeout_work.work); > + struct mmc_request *mrq = host->mrq; > + unsigned long flags; > + u32 irqc; > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (host->state == STATE_IDLE) { > + spin_unlock_irqrestore(&host->lock, flags); > + return; > + } > + > + dev_err(mmc_dev(host->mmc), "Timeout on CMD%u\n", mrq->cmd->opcode); > + > + host->state = STATE_TIMEOUT; > + > + irqc = readl(host->base + SDIO_IRQC); > + irqc &= ~REG_IRQC_ARC_CMD_INT; > + writel(irqc, host->base + SDIO_IRQC); > + > + mrq->cmd->error = -ETIMEDOUT; > + > + host->state = STATE_IDLE; > + host->mrq = NULL; > + spin_unlock_irqrestore(&host->lock, flags); > + > + mmc_request_done(host->mmc, mrq); > +} > + > +static void meson_mmc_reset(struct mmc_host *mmc) > +{ > + struct meson_mmc_host *host = mmc_priv(mmc); > + u32 reg = 0; > + > + dev_dbg(mmc_dev(mmc), "resetting mmc controller\n"); > + > + reg = (2 << REG_CONF_WR_CRC_S); > + reg |= (2 << REG_CONF_WR_NWR_S); > + reg |= (3 << REG_CONF_M_END_S); > + reg |= (39 << REG_CONF_ARGU_BITS_S); > + > + reg |= CLK_DIV; > + writel(reg, host->base + SDIO_CONF); > + > + reg = readl(host->base + SDIO_IRQS); > + reg |= (REG_IRQS_CMD_INT); > + writel(reg, host->base + SDIO_IRQS); > +} > + > +static struct mmc_host_ops meson_mmc_ops = { > + .request = meson_mmc_request, > + .set_ios = meson_mmc_set_ios, > + .get_cd = mmc_gpio_get_cd, > +}; > + > +static int meson_mmc_probe(struct platform_device *pdev) > +{ > + struct mmc_host *mmc; > + struct meson_mmc_host *host; > + struct device_node *node = pdev->dev.of_node; > + int ret, sdio_port; > + > + mmc = mmc_alloc_host(sizeof(struct meson_mmc_host), &pdev->dev); > + if (!mmc) { > + dev_err(&pdev->dev, "mmc alloc host failed\n"); > + return -ENOMEM; > + } > + > + host = mmc_priv(mmc); > + host->mmc = mmc; > + spin_lock_init(&host->lock); > + > + host->base = devm_ioremap_resource(&pdev->dev, > + platform_get_resource(pdev, IORESOURCE_MEM, 0)); > + if (IS_ERR(host->base)) { > + ret = PTR_ERR(host->base); > + goto error_free_host; > + } > + > + host->irq = platform_get_irq(pdev, 0); > + ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq, > + meson_mmc_irq_thread, 0, "meson_mmc", host); > + if (ret) > + goto error_free_host; > + > + host->clk_sdio = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(host->clk_sdio)) { > + dev_err(&pdev->dev, "Could not get clk81 clock\n"); No need to log this, it's handled by the clock framework. > + ret = PTR_ERR(host->clk_sdio); > + goto error_free_host; > + } > + > + mmc->ops = &meson_mmc_ops; > + > + /* we do not support scatter lists in hardware */ > + mmc->max_segs = 1; > + mmc->max_req_size = SDIO_BOUNCE_REQ_SIZE; > + mmc->max_seg_size = mmc->max_req_size; > + mmc->max_blk_count = 256; > + mmc->max_blk_size = mmc->max_req_size / mmc->max_blk_count; > + mmc->f_min = 300000; > + mmc->f_max = 50000000; > + mmc->caps |= MMC_CAP_4_BIT_DATA; > + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; > + mmc->ocr_avail = MMC_VDD_33_34; > + > + INIT_DELAYED_WORK(&host->timeout_work, meson_mmc_timeout); > + host->timeout = msecs_to_jiffies(2000); > + host->port = 0; > + > + if (!of_property_read_u32(node, "meson,sdio-port", &sdio_port)) > + host->port = sdio_port; > + > + ret = mmc_of_parse(mmc); > + if (ret) > + goto error_free_host; > + > + platform_set_drvdata(pdev, mmc); > + > + meson_mmc_reset(mmc); > + mmc_add_host(mmc); > + > + dev_info(&pdev->dev, "base:0x%p irq:%u port:%u\n", > + host->base, host->irq, host->port); > + > + return 0; > + > +error_free_host: > + mmc_free_host(mmc); > + > + return ret; > +} > + > +static int meson_mmc_remove(struct platform_device *pdev) > +{ > + struct mmc_host *mmc = platform_get_drvdata(pdev); > + struct meson_mmc_host *host = mmc_priv(mmc); > + > + mmc_remove_host(mmc); > + disable_irq(host->irq); > + > + mmc_free_host(mmc); > + > + cancel_delayed_work_sync(&host->timeout_work); This doesn't seem right, espeically since the work function are accessing the struct mmc_host. Somehow you need to protect this from happen, but I don't think you are doing that. > + > + return 0; > +} > + > +static const struct of_device_id meson_mmc_of_match[] = { > + { .compatible = "amlogic,meson-mmc", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, meson_mmc_of_match); > + > +static struct platform_driver meson_mmc_driver = { > + .probe = meson_mmc_probe, > + .remove = meson_mmc_remove, > + .driver = { > + .name = DRIVER_NAME, > + .of_match_table = of_match_ptr(meson_mmc_of_match), > + }, > +}; > + > +module_platform_driver(meson_mmc_driver); > + > +MODULE_DESCRIPTION("Meson Secure Digital Host Driver"); > +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); > +MODULE_LICENSE("GPL"); > -- > 2.1.4 > Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/meson-mmc.txt b/Documentation/devicetree/bindings/mmc/meson-mmc.txt new file mode 100644 index 0000000..839569a --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/meson-mmc.txt @@ -0,0 +1,38 @@ +* Amlogic MesonX MMC controller + +The highspeed MMC host controller on Amlogic SoCs provides an interface +for MMC, SD, SDIO and SDHC types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 2.0. + +Required properties: + - compatible : "amlogic,meson-mmc" + - reg : mmc controller base registers + - interrupts : mmc controller interrupt + - clocks : phandle to SDIO clock provider + +Optional properties: + - meson,sdio-port : 0 for SDIO port A, 1 for SDIO port B. (default: 0) + - for cd, bus-width and additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + - Within .dtsi: + mmc0: mmc@c1108c20 { + compatible = "amlogic,meson-mmc"; + reg = <0xc1108c20 0x20>; + interrupts = <0 28 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + - Within .dts: + &mmc0 { + status = "okay"; + pinctrl-0 = <&mmc0_sd_b_pins>; + pinctrl-names = "default"; + meson,sdio-port = <1>; + cd-gpios = <&gpio CARD_6 0>; + cd-inverted; + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b1f837e..e61b8d6 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -764,6 +764,13 @@ config MMC_REALTEK_USB Say Y here to include driver code to support SD/MMC card interface of Realtek RTS5129/39 series card reader +config MMC_MESON + tristate "Amlogic MesonX SD/MMC Host Controller support" + depends on ARCH_MESON + help + This selects support for the SD/MMC Host Controller on + Amlogic MesonX SoCs. + config MMC_SUNXI tristate "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index e3ab5b9..c0455e7 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o +obj-$(CONFIG_MMC_MESON) += meson-mmc.o obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o diff --git a/drivers/mmc/host/meson-mmc.c b/drivers/mmc/host/meson-mmc.c new file mode 100644 index 0000000..81a050e --- /dev/null +++ b/drivers/mmc/host/meson-mmc.c @@ -0,0 +1,626 @@ +/* + * mesonsd.c - Meson SDH Controller + * + * Copyright (C) 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#define DRIVER_NAME "meson-mmc" + +#define DEBUG + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/slot-gpio.h> + +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> + +#define SDIO_ARGU (0x00) +#define SDIO_SEND (0x04) +#define SDIO_CONF (0x08) +#define SDIO_IRQS (0x0c) +#define SDIO_IRQC (0x10) +#define SDIO_MULT (0x14) +#define SDIO_ADDR (0x18) +#define SDIO_EXT (0x1c) + +#define REG_IRQS_RESP_CRC7 BIT(5) +#define REG_IRQS_RD_CRC16 BIT(6) +#define REG_IRQS_WR_CRC16 BIT(7) +#define REG_IRQS_CMD_INT BIT(9) + +#define REG_IRQC_ARC_CMD_INT BIT(4) +#define REG_IRQC_SOFT_RESET BIT(15) + +#define REG_CONF_WR_CRC_S (29) +#define REG_CONF_WR_NWR_S (23) +#define REG_CONF_M_END_S (21) +#define REG_CONF_ARGU_BITS_S (12) +#define REG_CONF_CLK_DIV_M (0x3ff) +#define REG_CONF_BUS_WIDTH BIT(20) + +#define REG_MULT_PORT_SEL_M (0x3) +#define REG_MULT_RD_INDEX_M (0x0f) +#define REG_MULT_RD_INDEX_S (12) +#define REG_MULT_WR_RD_OUT_IND BIT(8) + +#define REG_SEND_CMD_COMMAND_M (0xff) +#define REG_SEND_CMD_RESP_S (8) +#define REG_SEND_RESP_NO_CRC7 BIT(16) +#define REG_SEND_RESP_HAVE_DATA BIT(17) +#define REG_SEND_RESP_CRC7_F_8 BIT(18) +#define REG_SEND_CHECK_BUSY_D0 BIT(19) +#define REG_SEND_CMD_SEND_DATA BIT(20) +#define REG_SEND_REP_PACK_N_M (0xff) +#define REG_SEND_REP_PACK_N_S (24) + +#define REG_EXT_DAT_RW_NUM_M (0x3fff) +#define REG_EXT_DAT_RW_NUM_S (16) + +#define CLK_DIV (0x1f4) + +#define SDIO_BOUNCE_REQ_SIZE (128 * 1024) + +enum mmcif_state { + STATE_IDLE, + STATE_REQUEST, + STATE_IOS, + STATE_TIMEOUT, + STATE_STOP, +}; + +struct meson_mmc_host { + struct mmc_host *mmc; + struct mmc_request *mrq; + struct delayed_work timeout_work; + struct clk *clk_sdio; + spinlock_t lock; + void __iomem *base; + long timeout; + int irq; + int ferror; + unsigned int bus_width; + unsigned int port; + enum mmcif_state state; +}; + +static int meson_mmc_clk_set_rate(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct meson_mmc_host *host = mmc_priv(mmc); + unsigned long clk_rate; + unsigned int clk_ios = ios->clock; + unsigned int clk_div; + u32 conf_reg; + + clk_rate = clk_get_rate(host->clk_sdio) / 2; + if (clk_rate < 0) { + dev_err(mmc_dev(mmc), "cannot get clock rate\n"); + return -EINVAL; + } + + clk_div = clk_rate / clk_ios - !(clk_rate % clk_ios); + + conf_reg = readl(host->base + SDIO_CONF); + conf_reg &= ~REG_CONF_CLK_DIV_M; + conf_reg |= clk_div; + writel(conf_reg, host->base + SDIO_CONF); + + dev_dbg(mmc_dev(mmc), "clk_ios: %d, clk_div: %d, clk_rate: %ld\n", + clk_ios, clk_div, clk_rate); + + return 0; +} + +static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct meson_mmc_host *host = mmc_priv(mmc); + u32 reg; + + if (host->state != STATE_IDLE) { + dev_dbg(mmc_dev(mmc), "%s() rejected, state %u\n", + __func__, host->state); + return; + } + + host->state = STATE_IOS; + + reg = readl(host->base + SDIO_CONF); + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + host->bus_width = 0; + reg &= ~REG_CONF_BUS_WIDTH; + dev_dbg(mmc_dev(mmc), "bus width: 1bit\n"); + break; + case MMC_BUS_WIDTH_4: + host->bus_width = 1; + reg |= REG_CONF_BUS_WIDTH; + dev_dbg(mmc_dev(mmc), "bus width: 4bit\n"); + break; + case MMC_BUS_WIDTH_8: + default: + dev_err(mmc_dev(mmc), "SDIO controller doesn't support 8bit data bus\n"); + host->ferror = -EINVAL; + return; + } + + writel(reg, host->base + SDIO_CONF); + + if (ios->clock && ios->power_mode) + host->ferror = meson_mmc_clk_set_rate(mmc, ios); + + host->state = STATE_IDLE; +} + +static void meson_mmc_soft_reset(struct meson_mmc_host *host) +{ + u32 irqc; + + irqc = readl(host->base + SDIO_IRQC); + irqc |= REG_IRQC_SOFT_RESET; + writel(irqc, host->base + SDIO_IRQC); + udelay(2); +} + +static void meson_mmc_start_cmd(struct mmc_host *mmc, + struct mmc_request *mrq) +{ + struct meson_mmc_host *host = mmc_priv(mmc); + unsigned int pack_size; + u32 irqc, irqs, mult; + u32 send = 0; + u32 ext = 0; + + switch (mmc_resp_type(mrq->cmd)) { + case MMC_RSP_R1: + case MMC_RSP_R1B: + case MMC_RSP_R3: + send |= (45 << REG_SEND_CMD_RESP_S); + break; + case MMC_RSP_R2: + send |= (133 << REG_SEND_CMD_RESP_S); + send |= REG_SEND_RESP_CRC7_F_8; + break; + default: + break; + } + + if (!(mrq->cmd->flags & MMC_RSP_CRC)) + send |= REG_SEND_RESP_NO_CRC7; + + if (mrq->cmd->flags & MMC_RSP_BUSY) + send |= REG_SEND_CHECK_BUSY_D0; + + if (mrq->data) { + send &= ~(REG_SEND_REP_PACK_N_M << REG_SEND_REP_PACK_N_S); + send |= ((mrq->data->blocks - 1) << REG_SEND_REP_PACK_N_S); + + ext &= ~(REG_EXT_DAT_RW_NUM_M << REG_EXT_DAT_RW_NUM_S); + if (host->bus_width) + pack_size = mrq->data->blksz * 8 + (16 - 1) * 4; + else + pack_size = mrq->data->blksz * 8 + (16 - 1); + ext |= (pack_size << REG_EXT_DAT_RW_NUM_S); + + if (mrq->data->flags & MMC_DATA_WRITE) + send |= REG_SEND_CMD_SEND_DATA; + else + send |= REG_SEND_RESP_HAVE_DATA; + } + + send &= ~REG_SEND_CMD_COMMAND_M; + send |= (0x40 | mrq->cmd->opcode); + + meson_mmc_soft_reset(host); + + irqc = readl(host->base + SDIO_IRQC); + irqc |= REG_IRQC_ARC_CMD_INT; + + irqs = readl(host->base + SDIO_IRQS); + irqs |= REG_IRQS_CMD_INT; + + mult = readl(host->base + SDIO_MULT); + mult &= ~REG_MULT_PORT_SEL_M; + mult |= host->port; + mult |= (1 << 31); + writel(mult, host->base + SDIO_MULT); + writel(irqs, host->base + SDIO_IRQS); + writel(irqc, host->base + SDIO_IRQC); + + writel(mrq->cmd->arg, host->base + SDIO_ARGU); + writel(ext, host->base + SDIO_EXT); + writel(send, host->base + SDIO_SEND); +} + +static int meson_mmc_map_dma(struct meson_mmc_host *host, + struct mmc_data *data, + unsigned int flags) +{ u32 i, dma_len; + struct scatterlist *sg = data->sg; + + if (sg->offset & 3 || sg->length & 3) { + dev_err(mmc_dev(host->mmc), + "unaligned scatterlist: os %x length %d\n", + sg->offset, sg->length); + return -EINVAL; + } + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + ((data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE)); + if (dma_len == 0) { + dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n"); + return -ENOMEM; + } + + return 0; +} + +static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct meson_mmc_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&host->lock, flags); + + if (host->state != STATE_IDLE) { + dev_dbg(mmc_dev(mmc), "%s() rejected, state %u\n", + __func__, host->state); + mrq->cmd->error = -EAGAIN; + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(mmc, mrq); + return; + } + + if (host->ferror) { + cmd->error = host->ferror; + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(mmc, mrq); + return; + } + + dev_dbg(mmc_dev(mmc), "CMD%d(%08x) arg %x len %d flags %08x\n", + cmd->opcode & 0x3f, cmd->opcode, cmd->arg, + mrq->data ? mrq->data->blksz * mrq->data->blocks : 0, + mrq->cmd->flags); + + /* Filter out CMD 5/52/53 */ + if (cmd->opcode == SD_IO_SEND_OP_COND || + cmd->opcode == SD_IO_RW_DIRECT || + cmd->opcode == SD_IO_RW_EXTENDED) { + dev_dbg(mmc_dev(host->mmc), "CMD%d not supported\n", + cmd->opcode); + cmd->error = -EINVAL; + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(mmc, mrq); + return; + } + + host->state = STATE_REQUEST; + + if (data) { + ret = meson_mmc_map_dma(host, data, data->flags); + if (ret < 0) { + dev_err(mmc_dev(mmc), "map DMA failed\n"); + cmd->error = ret; + data->error = ret; + host->state = STATE_IDLE; + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(mmc, mrq); + return; + } + writel(sg_dma_address(data->sg), host->base + SDIO_ADDR); + } + + host->mrq = mrq; + schedule_delayed_work(&host->timeout_work, host->timeout); + meson_mmc_start_cmd(mmc, mrq); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static irqreturn_t meson_mmc_irq(int irq, void *data) +{ + struct meson_mmc_host *host = (void *) data; + struct mmc_request *mrq = host->mrq; + u32 irqs; + + irqs = readl(host->base + SDIO_IRQS); + if (mrq && (irqs & REG_IRQS_CMD_INT)) + return IRQ_WAKE_THREAD; + + return IRQ_HANDLED; +} + +void meson_mmc_read_response(struct meson_mmc_host *host) +{ + struct mmc_command *cmd = host->mrq->cmd; + u32 mult; + int i, resp[4] = { 0 }; + + mult = readl(host->base + SDIO_MULT); + mult |= REG_MULT_WR_RD_OUT_IND; + mult &= ~(REG_MULT_RD_INDEX_M << REG_MULT_RD_INDEX_S); + writel(mult, host->base + SDIO_MULT); + + if (cmd->flags & MMC_RSP_136) { + for (i = 0; i <= 3; i++) + resp[3 - i] = readl(host->base + SDIO_ARGU); + cmd->resp[0] = (resp[0] << 8) | ((resp[1] >> 24) & 0xff); + cmd->resp[1] = (resp[1] << 8) | ((resp[2] >> 24) & 0xff); + cmd->resp[2] = (resp[2] << 8) | ((resp[3] >> 24) & 0xff); + cmd->resp[3] = (resp[3] << 8); + } else if (cmd->flags & MMC_RSP_PRESENT) { + cmd->resp[0] = readl(host->base + SDIO_ARGU); + } +} + +struct mmc_command meson_mmc_cmd = { + .opcode = MMC_STOP_TRANSMISSION, + .flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC, +}; + +struct mmc_request meson_mmc_stop = { + .cmd = &meson_mmc_cmd, +}; + +static irqreturn_t meson_mmc_irq_thread(int irq, void *irq_data) +{ + struct meson_mmc_host *host = (void *) irq_data; + struct mmc_data *data; + unsigned long flags; + struct mmc_request *mrq; + u32 irqs, send; + + spin_lock_irqsave(&host->lock, flags); + + cancel_delayed_work_sync(&host->timeout_work); + mrq = host->mrq; + data = mrq->data; + + if (!mrq) { + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_HANDLED; + } + + if (host->state == STATE_STOP) + goto out; + + if (host->state != STATE_REQUEST) { + dev_dbg(mmc_dev(host->mmc), "%s() rejected, state %u\n", + __func__, host->state); + mrq->cmd->error = -EAGAIN; + goto out; + } + + irqs = readl(host->base + SDIO_IRQS); + send = readl(host->base + SDIO_SEND); + + mrq->cmd->error = 0; + + if (!data) { + if (!((irqs & REG_IRQS_RESP_CRC7) || + (send & REG_SEND_RESP_NO_CRC7))) + mrq->cmd->error = -EILSEQ; + else + meson_mmc_read_response(host); + } else { + if (!((irqs & REG_IRQS_RD_CRC16) || + (irqs & REG_IRQS_WR_CRC16))) { + mrq->cmd->error = -EILSEQ; + } else { + data->bytes_xfered = data->blksz * data->blocks; + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + ((data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE)); + + if (mrq->stop) { + host->state = STATE_STOP; + meson_mmc_start_cmd(host->mmc, &meson_mmc_stop); + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_HANDLED; + } + } + } + +out: + host->state = STATE_IDLE; + host->mrq = NULL; + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(host->mmc, mrq); + + return IRQ_HANDLED; +} + +static void meson_mmc_timeout(struct work_struct *work) +{ + struct meson_mmc_host *host = container_of(work, + struct meson_mmc_host, + timeout_work.work); + struct mmc_request *mrq = host->mrq; + unsigned long flags; + u32 irqc; + + spin_lock_irqsave(&host->lock, flags); + + if (host->state == STATE_IDLE) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + dev_err(mmc_dev(host->mmc), "Timeout on CMD%u\n", mrq->cmd->opcode); + + host->state = STATE_TIMEOUT; + + irqc = readl(host->base + SDIO_IRQC); + irqc &= ~REG_IRQC_ARC_CMD_INT; + writel(irqc, host->base + SDIO_IRQC); + + mrq->cmd->error = -ETIMEDOUT; + + host->state = STATE_IDLE; + host->mrq = NULL; + spin_unlock_irqrestore(&host->lock, flags); + + mmc_request_done(host->mmc, mrq); +} + +static void meson_mmc_reset(struct mmc_host *mmc) +{ + struct meson_mmc_host *host = mmc_priv(mmc); + u32 reg = 0; + + dev_dbg(mmc_dev(mmc), "resetting mmc controller\n"); + + reg = (2 << REG_CONF_WR_CRC_S); + reg |= (2 << REG_CONF_WR_NWR_S); + reg |= (3 << REG_CONF_M_END_S); + reg |= (39 << REG_CONF_ARGU_BITS_S); + + reg |= CLK_DIV; + writel(reg, host->base + SDIO_CONF); + + reg = readl(host->base + SDIO_IRQS); + reg |= (REG_IRQS_CMD_INT); + writel(reg, host->base + SDIO_IRQS); +} + +static struct mmc_host_ops meson_mmc_ops = { + .request = meson_mmc_request, + .set_ios = meson_mmc_set_ios, + .get_cd = mmc_gpio_get_cd, +}; + +static int meson_mmc_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct meson_mmc_host *host; + struct device_node *node = pdev->dev.of_node; + int ret, sdio_port; + + mmc = mmc_alloc_host(sizeof(struct meson_mmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "mmc alloc host failed\n"); + return -ENOMEM; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + spin_lock_init(&host->lock); + + host->base = devm_ioremap_resource(&pdev->dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto error_free_host; + } + + host->irq = platform_get_irq(pdev, 0); + ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq, + meson_mmc_irq_thread, 0, "meson_mmc", host); + if (ret) + goto error_free_host; + + host->clk_sdio = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(host->clk_sdio)) { + dev_err(&pdev->dev, "Could not get clk81 clock\n"); + ret = PTR_ERR(host->clk_sdio); + goto error_free_host; + } + + mmc->ops = &meson_mmc_ops; + + /* we do not support scatter lists in hardware */ + mmc->max_segs = 1; + mmc->max_req_size = SDIO_BOUNCE_REQ_SIZE; + mmc->max_seg_size = mmc->max_req_size; + mmc->max_blk_count = 256; + mmc->max_blk_size = mmc->max_req_size / mmc->max_blk_count; + mmc->f_min = 300000; + mmc->f_max = 50000000; + mmc->caps |= MMC_CAP_4_BIT_DATA; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + mmc->ocr_avail = MMC_VDD_33_34; + + INIT_DELAYED_WORK(&host->timeout_work, meson_mmc_timeout); + host->timeout = msecs_to_jiffies(2000); + host->port = 0; + + if (!of_property_read_u32(node, "meson,sdio-port", &sdio_port)) + host->port = sdio_port; + + ret = mmc_of_parse(mmc); + if (ret) + goto error_free_host; + + platform_set_drvdata(pdev, mmc); + + meson_mmc_reset(mmc); + mmc_add_host(mmc); + + dev_info(&pdev->dev, "base:0x%p irq:%u port:%u\n", + host->base, host->irq, host->port); + + return 0; + +error_free_host: + mmc_free_host(mmc); + + return ret; +} + +static int meson_mmc_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct meson_mmc_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + disable_irq(host->irq); + + mmc_free_host(mmc); + + cancel_delayed_work_sync(&host->timeout_work); + + return 0; +} + +static const struct of_device_id meson_mmc_of_match[] = { + { .compatible = "amlogic,meson-mmc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, meson_mmc_of_match); + +static struct platform_driver meson_mmc_driver = { + .probe = meson_mmc_probe, + .remove = meson_mmc_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(meson_mmc_of_match), + }, +}; + +module_platform_driver(meson_mmc_driver); + +MODULE_DESCRIPTION("Meson Secure Digital Host Driver"); +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); +MODULE_LICENSE("GPL");