From patchwork Thu Jul 30 07:46:33 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 6899611 Return-Path: X-Original-To: patchwork-linux-mmc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 85D85C05AC for ; Thu, 30 Jul 2015 07:49:37 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 9AA5920519 for ; Thu, 30 Jul 2015 07:49:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9062B2054A for ; Thu, 30 Jul 2015 07:49:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754828AbbG3HtS (ORCPT ); Thu, 30 Jul 2015 03:49:18 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:52453 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751703AbbG3Hri (ORCPT ); Thu, 30 Jul 2015 03:47:38 -0400 Received: from dflxv15.itg.ti.com ([128.247.5.124]) by comal.ext.ti.com (8.13.7/8.13.7) with ESMTP id t6U7lBcx027234; Thu, 30 Jul 2015 02:47:11 -0500 Received: from DLEE71.ent.ti.com (dlee71.ent.ti.com [157.170.170.114]) by dflxv15.itg.ti.com (8.14.3/8.13.8) with ESMTP id t6U7lBQS010511; Thu, 30 Jul 2015 02:47:11 -0500 Received: from dlep32.itg.ti.com (157.170.170.100) by DLEE71.ent.ti.com (157.170.170.114) with Microsoft SMTP Server id 14.3.224.2; Thu, 30 Jul 2015 02:47:11 -0500 Received: from a0393678ub.india.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by dlep32.itg.ti.com (8.14.3/8.13.8) with ESMTP id t6U7kZVe006418; Thu, 30 Jul 2015 02:47:08 -0500 From: Kishon Vijay Abraham I To: , , , , , , CC: , , Subject: [PATCH 10/11] mmc: host: omap_hsmmc: remove incorrect voltage switch sequence Date: Thu, 30 Jul 2015 13:16:33 +0530 Message-ID: <1438242394-25599-11-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1438242394-25599-1-git-send-email-kishon@ti.com> References: <1438242394-25599-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Spam-Status: No, score=-8.3 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP ios->vdd is set only in mmc_power_up and mmc_power_off and not in mmc_select_voltage as mentioned in the code comment. This seems to be legacy code that has been carried for a long time without being tested. This will be replaced with a proper voltage switch sequence and populated in start_signal_voltage_switch ops to be used by mmc core for switching voltages. Signed-off-by: Kishon Vijay Abraham I --- drivers/mmc/host/omap_hsmmc.c | 81 ----------------------------------------- 1 file changed, 81 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 26010a3..6b02c7c 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1325,69 +1325,6 @@ static void set_sd_bus_power(struct omap_hsmmc_host *host) } } -/* - * Switch MMC interface voltage ... only relevant for MMC1. - * - * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. - * The MMC2 transceiver controls are used instead of DAT4..DAT7. - * Some chips, like eMMC ones, use internal transceivers. - */ -static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) -{ - u32 reg_val = 0; - int ret; - - /* Disable the clocks */ - pm_runtime_put_sync(host->dev); - if (host->dbclk) - clk_disable_unprepare(host->dbclk); - - /* Turn the power off */ - ret = mmc_pdata(host)->set_power(host->dev, 0, 0); - - /* Turn the power ON with given VDD 1.8 or 3.0v */ - if (!ret) - ret = mmc_pdata(host)->set_power(host->dev, 1, vdd); - pm_runtime_get_sync(host->dev); - if (host->dbclk) - clk_prepare_enable(host->dbclk); - - if (ret != 0) - goto err; - - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); - reg_val = OMAP_HSMMC_READ(host->base, HCTL); - - /* - * If a MMC dual voltage card is detected, the set_ios fn calls - * this fn with VDD bit set for 1.8V. Upon card removal from the - * slot, omap_hsmmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. - * - * Cope with a bit of slop in the range ... per data sheets: - * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, - * but recommended values are 1.71V to 1.89V - * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, - * but recommended values are 2.7V to 3.3V - * - * Board setup code shouldn't permit anything very out-of-range. - * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the - * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. - */ - if ((1 << vdd) <= MMC_VDD_23_24) - reg_val |= SDVS18; - else - reg_val |= SDVS30; - - OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); - set_sd_bus_power(host); - - return 0; -err: - dev_err(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); - return ret; -} - /* Protect the card while the cover is open */ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host) { @@ -1799,24 +1736,6 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) omap_hsmmc_set_bus_width(host); - if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { - /* Only MMC1 can interface at 3V without some flavor - * of external transceiver; but they all handle 1.8V. - */ - if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && - (ios->vdd == DUAL_VOLT_OCR_BIT)) { - /* - * The mmc_select_voltage fn of the core does - * not seem to set the power_mode to - * MMC_POWER_UP upon recalculating the voltage. - * vdd 1.8v. - */ - if (omap_hsmmc_switch_opcond(host, ios->vdd) != 0) - dev_dbg(mmc_dev(host->mmc), - "Switch operation failed\n"); - } - } - omap_hsmmc_set_clock(host); if (ios->timing != host->timing) {