@@ -267,8 +267,11 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
if (host->pbias) {
if (host->pbias_enabled == 1) {
ret = regulator_disable(host->pbias);
- if (!ret)
- host->pbias_enabled = 0;
+ if (ret) {
+ dev_err(dev, "pbias reg disable failed\n");
+ return ret;
+ }
+ host->pbias_enabled = 0;
}
}
@@ -286,23 +289,35 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- if (mmc->supply.vmmc)
+ if (mmc->supply.vmmc) {
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (ret)
+ return ret;
+ }
+
/* Enable interface voltage rail, if needed */
- if (ret == 0 && mmc->supply.vqmmc) {
+ if (mmc->supply.vqmmc) {
ret = regulator_enable(mmc->supply.vqmmc);
- if (ret < 0 && mmc->supply.vmmc)
- ret = mmc_regulator_set_ocr(mmc,
- mmc->supply.vmmc,
- 0);
+ if (ret) {
+ dev_err(dev, "vmmc_aux reg enable failed\n");
+ goto err_set_vqmmc;
+ }
}
} else {
/* Shut down the rail */
- if (mmc->supply.vqmmc)
+ if (mmc->supply.vqmmc) {
ret = regulator_disable(mmc->supply.vqmmc);
+ if (ret) {
+ dev_err(dev, "vmmc_aux reg disable failed\n");
+ return ret;
+ }
+ }
+
if (mmc->supply.vmmc) {
/* Then proceed to shut down the local regulator */
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ if (ret)
+ return ret;
}
}
@@ -314,19 +329,32 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
ret = regulator_set_voltage(host->pbias, VDD_3V0,
VDD_3V0);
if (ret < 0)
- goto error_set_power;
+ goto err_set_voltage;
if (host->pbias_enabled == 0) {
ret = regulator_enable(host->pbias);
- if (!ret)
+ if (ret) {
+ dev_err(dev, "pbias reg enable failed\n");
+ goto err_set_voltage;
+ } else {
host->pbias_enabled = 1;
+ }
}
}
if (mmc_pdata(host)->after_set_reg)
mmc_pdata(host)->after_set_reg(dev, power_on, vdd);
-error_set_power:
+ return 0;
+
+err_set_voltage:
+ if (mmc->supply.vqmmc)
+ regulator_disable(mmc->supply.vqmmc);
+
+err_set_vqmmc:
+ if (mmc->supply.vmmc)
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+
return ret;
}
Return error if any of the regulator APIs (regulator_enable, regulator_disable, regulator_set_voltage) fails in omap_hsmmc_set_power to avoid undefined behavior. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/mmc/host/omap_hsmmc.c | 52 +++++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 12 deletions(-)