From patchwork Wed Sep 30 14:07:39 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Heiko_St=C3=BCbner?= X-Patchwork-Id: 7298391 Return-Path: X-Original-To: patchwork-linux-mmc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 6E58EBEEA4 for ; Wed, 30 Sep 2015 14:08:21 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 576A2204C9 for ; Wed, 30 Sep 2015 14:08:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 4883820617 for ; Wed, 30 Sep 2015 14:08:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754106AbbI3OIO (ORCPT ); Wed, 30 Sep 2015 10:08:14 -0400 Received: from gloria.sntech.de ([95.129.55.99]:51085 "EHLO gloria.sntech.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753801AbbI3OH6 (ORCPT ); Wed, 30 Sep 2015 10:07:58 -0400 Received: from ip5f5b95ad.dynamic.kabel-deutschland.de ([95.91.149.173] helo=diego.lan) by gloria.sntech.de with esmtpsa (TLS1.1:RSA_AES_128_CBC_SHA1:128) (Exim 4.80) (envelope-from ) id 1ZhI2w-0007Fz-BF; Wed, 30 Sep 2015 16:07:50 +0200 From: Heiko Stuebner To: ulf.hansson@linaro.org, mturquette@baylibre.com, sboyd@codeaurora.org, tgih.jun@samsung.com, jh80.chung@samsung.com Cc: linux-mmc@vger.kernel.org, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, dianders@chromium.org, amstan@chromium.org, Heiko Stuebner Subject: [PATCH v2 3/8] mmc: core: Add mmc_regulator_set_vqmmc() Date: Wed, 30 Sep 2015 16:07:39 +0200 Message-Id: <1443622064-14362-4-git-send-email-heiko@sntech.de> X-Mailer: git-send-email 2.5.3 In-Reply-To: <1443622064-14362-1-git-send-email-heiko@sntech.de> References: <1443622064-14362-1-git-send-email-heiko@sntech.de> Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Douglas Anderson This adds logic to the MMC core to set VQMMC. This is expected to be called by MMC drivers like dw_mmc as part of (or instead of) their start_signal_voltage_switch() callback. A few notes: * When setting the signal voltage to 3.3V we do our best to make VQMMC and VMMC match. It's been reported that this makes some old cards happy since they were tested back in the day before UHS when VQMMC and VMMC were provided by the same regulator. A nice side effect of this is that we don't end up on the hairy edge of VQMMC (2.7V), which some EEs claim is a little too close to the minimum for comfort. This is done in two steps. At first we try to find a VQMMC within a 0.3V tolerance of VMMC and if this is not supported by the supplying regulator we try to find a suitable voltage within the whole 2.7V-3.6V area of the spec. * The two step approach is currently necessary, as the used regulator_set_voltage_triplet(min, target, max) uses a simple implementation that just tries two basic steps: regulator_set_voltage(target, max); regulator_set_voltage(min, target); So with only one step with 2.7-3.6V borders, if a suitable voltage is a bit below VMMC, we would directly get the lowest 2.7V which some boards (like Rockchips) don't like at all. * When setting the signal voltage to 1.8V or 1.2V we aim for that specific voltage instead of picking the lowest one in the range. * We very purposely don't print errors in mmc_regulator_set_vqmmc(). There are cases where the MMC core will try several different voltages and we don't want to pollute the logs. Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- drivers/mmc/core/core.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mmc/host.h | 7 +++++ 2 files changed, 81 insertions(+) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 0520064..363cc98 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1437,6 +1437,80 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, } EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); +static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator, + int min_uV, int target_uV, + int max_uV) +{ + /* + * Check if supported first to avoid errors since we may try several + * signal levels during power up and don't want to show errors. + */ + if (!regulator_is_supported_voltage(regulator, min_uV, max_uV)) + return -EINVAL; + + return regulator_set_voltage_triplet(regulator, min_uV, target_uV, + max_uV); +} + +/** + * mmc_regulator_set_vqmmc - Set VQMMC as per the ios + * + * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible. + * That will match the behavior of old boards where VQMMC and VMMC were supplied + * by the same supply. The Bus Operating conditions for 3.3V signaling in the + * SD card spec also define VQMMC in terms of VMMC. + * If this is not possible we'll try the full 2.7-3.6V of the spec. + * + * For 1.2V and 1.8V signaling we'll try to get as close as possible to the + * requested voltage. This is definitely a good idea for UHS where there's a + * separate regulator on the card that's trying to make 1.8V and it's best if + * we match. + * + * This function is expected to be used by a controller's + * start_signal_voltage_switch() function. + */ +int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios) +{ + int volt, min_uV, max_uV; + + /* If no vqmmc supply then we can't change the voltage */ + if (IS_ERR(mmc->supply.vqmmc)) + return -EINVAL; + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_120: + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 1100000, 1200000, 1300000); + case MMC_SIGNAL_VOLTAGE_180: + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 1700000, 1800000, 1950000); + case MMC_SIGNAL_VOLTAGE_330: + volt = regulator_get_voltage(mmc->supply.vmmc); + if (volt < 0) + return volt; + + min_uV = max(volt - 300000, 2700000); + max_uV = min(volt + 300000, 3600000); + + /* + * Due to a limitation in the current implementation of + * regulator_set_voltage_triplet() which is taking the lowest + * voltage possible if below the target, search for a suitable + * voltage in two steps and try to stay close to vmmc + * with a 0.3V tolerance at first. + */ + if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + min_uV, volt, max_uV)) + return 0; + + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 2700000, volt, 3600000); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc); + #endif /* CONFIG_REGULATOR */ int mmc_regulator_get_supply(struct mmc_host *mmc) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 83b81fd..a2a78eb 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -423,6 +423,7 @@ int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit); +int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios); #else static inline int mmc_regulator_get_ocrmask(struct regulator *supply) { @@ -435,6 +436,12 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, { return 0; } + +static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + return -EINVAL; +} #endif int mmc_regulator_get_supply(struct mmc_host *mmc);