@@ -320,6 +320,7 @@ Code Seq#(hex) Include File Comments
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
0xB3 00 linux/mmc/ioctl.h
0xB4 00-0F linux/gpio.h <mailto:linux-gpio@vger.kernel.org>
+0xB5 00 linux/uapi/linux/rpmb.h <mailto:linux-mei@linux.intel.com>
0xC0 00-0F linux/usb/iowarrior.h
0xCA 00-0F uapi/misc/cxl.h
0xCA 80-8F uapi/scsi/cxlflash_ioctl.h
@@ -9422,6 +9422,7 @@ M: Tomas Winkler <tomas.winkler@intel.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/char/rpmb/*
+F: include/uapi/linux/rpmb.h
F: include/linux/rpmb.h
F: Documentation/ABI/testing/sysfs-class-rpmb
@@ -6,3 +6,10 @@ config RPMB
access RPMB partition.
If unsure, select N.
+
+config RPMB_INTF_DEV
+ bool "RPMB character device interface /dev/rpmbN"
+ depends on RPMB
+ help
+ Say yes here if you want to access RPMB from user space
+ via character device interface /dev/rpmb%d
@@ -1,4 +1,5 @@
obj-$(CONFIG_RPMB) += rpmb.o
rpmb-objs += core.o
+rpmb-$(CONFIG_RPMB_INTF_DEV) += cdev.o
ccflags-y += -D__CHECK_ENDIAN__
new file mode 100644
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2015-2016 Intel Corp. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/compat.h>
+#include <linux/slab.h>
+#include <linux/rpmb.h>
+
+#include "rpmb-cdev.h"
+
+static dev_t rpmb_devt;
+#define RPMB_MAX_DEVS MINORMASK
+
+#define RPMB_DEV_OPEN 0 /** single open bit (position) */
+
+/**
+ * rpmb_open - the open function
+ *
+ * @inode: pointer to inode structure
+ * @file: pointer to file structure
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int rpmb_open(struct inode *inode, struct file *file)
+{
+ struct rpmb_dev *rdev;
+
+ rdev = container_of(inode->i_cdev, struct rpmb_dev, cdev);
+ if (!rdev)
+ return -ENODEV;
+
+ /* the rpmb is single open! */
+ if (test_and_set_bit(RPMB_DEV_OPEN, &rdev->status))
+ return -EBUSY;
+
+ mutex_lock(&rdev->lock);
+
+ file->private_data = rdev;
+
+ mutex_unlock(&rdev->lock);
+
+ return nonseekable_open(inode, file);
+}
+
+static int rpmb_release(struct inode *inode, struct file *file)
+{
+ struct rpmb_dev *rdev = file->private_data;
+
+ clear_bit(RPMB_DEV_OPEN, &rdev->status);
+
+ return 0;
+}
+
+/*
+ * FIMXE: will be exported by the kernel in future version
+ * helper to convert user pointers passed inside __aligned_u64 fields
+ */
+static void __user *u64_to_ptr(__u64 val)
+{
+ return (void __user *) (unsigned long) val;
+}
+
+static int rpmb_ioctl_cmd(struct rpmb_dev *rdev,
+ struct rpmb_ioc_cmd __user *ptr)
+{
+ struct rpmb_ioc_cmd cmd;
+ struct rpmb_data rpmbd;
+ struct rpmb_frame *in_frames = NULL;
+ struct rpmb_frame *out_frames = NULL;
+ size_t in_sz, out_sz;
+ int ret;
+
+ if (copy_from_user(&cmd, ptr, sizeof(cmd)))
+ return -EFAULT;
+
+ if (cmd.in_frames_count == 0 || cmd.out_frames_count == 0)
+ return -EINVAL;
+
+ in_sz = sizeof(struct rpmb_frame) * cmd.in_frames_count;
+ in_frames = memdup_user(u64_to_ptr(cmd.in_frames_ptr), in_sz);
+ if (IS_ERR(in_frames)) {
+ ret = PTR_ERR(in_frames);
+ in_frames = NULL;
+ goto out;
+ }
+
+ out_sz = sizeof(struct rpmb_frame) * cmd.out_frames_count;
+ out_frames = kmalloc(out_sz, GFP_KERNEL);
+ if (!out_frames) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rpmbd.req_type = cmd.req;
+ rpmbd.in_frames = in_frames;
+ rpmbd.out_frames = out_frames;
+ rpmbd.in_frames_cnt = cmd.in_frames_count;
+ rpmbd.out_frames_cnt = cmd.out_frames_count;
+
+ ret = rpmb_send_req(rdev, &rpmbd);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to process request = %d.\n", ret);
+ goto out;
+ }
+
+ if (copy_to_user(u64_to_ptr(cmd.out_frames_ptr), out_frames, out_sz)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ if (copy_to_user(ptr, &cmd, sizeof(cmd))) {
+ ret = -EFAULT;
+ goto out;
+ }
+out:
+ kfree(in_frames);
+ kfree(out_frames);
+ return ret;
+}
+
+static long rpmb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct rpmb_dev *rdev = file->private_data;
+ struct rpmb_ioc_cmd __user *req = (void __user *)arg;
+
+ if (cmd != RPMB_IOC_REQ) {
+ dev_err(&rdev->dev, "unsupported ioctl 0x%x.\n", cmd);
+ return -ENOIOCTLCMD;
+ }
+
+ return rpmb_ioctl_cmd(rdev, req);
+}
+
+#ifdef CONFIG_COMPAT
+static long compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct rpmb_dev *rdev = file->private_data;
+ struct rpmb_ioc_cmd __user *req = (void __user *)compat_ptr(arg);
+
+ if (cmd != RPMB_IOC_REQ) {
+ dev_err(&rdev->dev, "unsupported ioctl 0x%x.\n", cmd);
+ return -ENOIOCTLCMD;
+ }
+
+ return rpmb_ioctl_cmd(rdev, req);
+}
+#endif /* CONFIG_COMPAT */
+
+static const struct file_operations rpmb_fops = {
+ .open = rpmb_open,
+ .release = rpmb_release,
+ .unlocked_ioctl = rpmb_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = compat_ioctl,
+#endif
+ .owner = THIS_MODULE,
+ .llseek = noop_llseek,
+};
+
+void rpmb_cdev_prepare(struct rpmb_dev *rdev)
+{
+ rdev->dev.devt = MKDEV(MAJOR(rpmb_devt), rdev->id);
+ rdev->cdev.owner = THIS_MODULE;
+ cdev_init(&rdev->cdev, &rpmb_fops);
+}
+
+void rpmb_cdev_add(struct rpmb_dev *rdev)
+{
+ cdev_add(&rdev->cdev, rdev->dev.devt, 1);
+}
+
+void rpmb_cdev_del(struct rpmb_dev *rdev)
+{
+ if (rdev->dev.devt)
+ cdev_del(&rdev->cdev);
+}
+
+int __init rpmb_cdev_init(void)
+{
+ int ret;
+
+ ret = alloc_chrdev_region(&rpmb_devt, 0, RPMB_MAX_DEVS, "rpmb");
+ if (ret < 0)
+ pr_err("unable to allocate char dev region\n");
+
+ return ret;
+}
+
+void __exit rpmb_cdev_exit(void)
+{
+ if (rpmb_devt)
+ unregister_chrdev_region(rpmb_devt, RPMB_MAX_DEVS);
+}
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/rpmb.h>
+#include "rpmb-cdev.h"
static DEFINE_IDA(rpmb_ida);
@@ -313,6 +314,7 @@ int rpmb_dev_unregister(struct device *dev)
rpmb_dev_put(rdev);
mutex_lock(&rdev->lock);
+ rpmb_cdev_del(rdev);
device_del(&rdev->dev);
mutex_unlock(&rdev->lock);
@@ -364,10 +366,14 @@ struct rpmb_dev *rpmb_dev_register(struct device *dev,
rdev->dev.parent = dev;
rdev->dev.groups = rpmb_attr_groups;
+ rpmb_cdev_prepare(rdev);
+
ret = device_register(&rdev->dev);
if (ret)
goto exit;
+ rpmb_cdev_add(rdev);
+
dev_dbg(&rdev->dev, "registered disk\n");
return rdev;
@@ -384,11 +390,12 @@ static int __init rpmb_init(void)
{
ida_init(&rpmb_ida);
class_register(&rpmb_class);
- return 0;
+ return rpmb_cdev_init();
}
static void __exit rpmb_exit(void)
{
+ rpmb_cdev_exit();
class_unregister(&rpmb_class);
ida_destroy(&rpmb_ida);
}
new file mode 100644
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2015-2016 Intel Corp. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+
+#ifdef CONFIG_RPMB_INTF_DEV
+int __init rpmb_cdev_init(void);
+void __exit rpmb_cdev_exit(void);
+void rpmb_cdev_prepare(struct rpmb_dev *rdev);
+void rpmb_cdev_add(struct rpmb_dev *rdev);
+void rpmb_cdev_del(struct rpmb_dev *rdev);
+
+#else
+static inline int __init rpmb_cdev_init(void)
+{
+ return 0;
+}
+static inline void __exit rpmb_cdev_exit(void) {}
+static inline void rpmb_cdev_prepare(struct rpmb_dev *rdev) {}
+static inline void rpmb_cdev_add(struct rpmb_dev *rdev) {}
+static inline void rpmb_cdev_del(struct rpmb_dev *rdev) {}
+#endif /* CONFIG_RPMB_INTF_DEV */
@@ -15,79 +15,11 @@
#include <linux/types.h>
#include <linux/device.h>
+#include <linux/cdev.h>
+#include <uapi/linux/rpmb.h>
#include <linux/kref.h>
/**
- * struct rpmb_frame - rpmb frame as defined by specs
- *
- * @stuff : stuff bytes
- * @key_mac : The authentication key or the message authentication
- * code (MAC) depending on the request/response type.
- * The MAC will be delivered in the last (or the only)
- * block of data.
- * @data : Data to be written or read by signed access.
- * @nonce : Random number generated by the host for the requests
- * and copied to the response by the RPMB engine.
- * @write_counter: Counter value for the total amount of the successful
- * authenticated data write requests made by the host.
- * @addr : Address of the data to be programmed to or read
- * from the RPMB. Address is the serial number of
- * the accessed block (half sector 256B).
- * @block_count : Number of blocks (half sectors, 256B) requested to be
- * read/programmed.
- * @result : Includes information about the status of the write counter
- * (valid, expired) and result of the access made to the RPMB.
- * @req_resp : Defines the type of request and response to/from the memory.
- */
-struct rpmb_frame {
- u8 stuff[196];
- u8 key_mac[32];
- u8 data[256];
- u8 nonce[16];
- __be32 write_counter;
- __be16 addr;
- __be16 block_count;
- __be16 result;
- __be16 req_resp;
-} __packed;
-
-#define RPMB_PROGRAM_KEY 0x1 /* Program RPMB Authentication Key */
-#define RPMB_GET_WRITE_COUNTER 0x2 /* Read RPMB write counter */
-#define RPMB_WRITE_DATA 0x3 /* Write data to RPMB partition */
-#define RPMB_READ_DATA 0x4 /* Read data from RPMB partition */
-#define RPMB_RESULT_READ 0x5 /* Read result request (Internal) */
-
-#define RPMB_REQ2RESP(_OP) ((_OP) << 8)
-#define RPMB_RESP2REQ(_OP) ((_OP) >> 8)
-
-/**
- * enum rpmb_op_result - rpmb operation results
- *
- * @RPMB_ERR_OK : operation successful
- * @RPMB_ERR_GENERAL : general failure
- * @RPMB_ERR_AUTH : mac doesn't match or ac calculation failure
- * @RPMB_ERR_COUNTER : counter doesn't match or counter increment failure
- * @RPMB_ERR_ADDRESS : address out of range or wrong address alignment
- * @RPMB_ERR_WRITE : data, counter, or result write failure
- * @RPMB_ERR_READ : data, counter, or result read failure
- * @RPMB_ERR_NO_KEY : authentication key not yet programmed
- *
- * @RPMB_ERR_COUNTER_EXPIRED: counter expired
- */
-enum rpmb_op_result {
- RPMB_ERR_OK = 0x0000,
- RPMB_ERR_GENERAL = 0x0001,
- RPMB_ERR_AUTH = 0x0002,
- RPMB_ERR_COUNTER = 0x0003,
- RPMB_ERR_ADDRESS = 0x0004,
- RPMB_ERR_WRITE = 0x0005,
- RPMB_ERR_READ = 0x0006,
- RPMB_ERR_NO_KEY = 0x0007,
-
- RPMB_ERR_COUNTER_EXPIRED = 0x0080
-};
-
-/**
* enum rpmb_type - type of underlaying storage technology
*
* @RPMB_TYPE_ANY : any type used for search only
@@ -144,12 +76,18 @@ struct rpmb_ops {
* @lock : lock
* @dev : device
* @id : device id
+ * @cdev : character dev
+ * @status : device status
* @ops : operation exported by block layer
*/
struct rpmb_dev {
struct mutex lock;
struct device dev;
int id;
+#ifdef CONFIG_RPMB_INTF_DEV
+ struct cdev cdev;
+ unsigned long status;
+#endif /* CONFIG_RPMB_INTF_DEV */
const struct rpmb_ops *ops;
};
new file mode 100644
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2015-2016, Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UAPI_LINUX_RPMB_H_
+#define _UAPI_LINUX_RPMB_H_
+
+#include <linux/types.h>
+
+/**
+ * struct rpmb_frame - rpmb frame as defined by specs
+ *
+ * @stuff : stuff bytes
+ * @key_mac : The authentication key or the message authentication
+ * code (MAC) depending on the request/response type.
+ * The MAC will be delivered in the last (or the only)
+ * block of data.
+ * @data : Data to be written or read by signed access.
+ * @nonce : Random number generated by the host for the requests
+ * and copied to the response by the RPMB engine.
+ * @write_counter: Counter value for the total amount of the successful
+ * authenticated data write requests made by the host.
+ * @addr : Address of the data to be programmed to or read
+ * from the RPMB. Address is the serial number of
+ * the accessed block (half sector 256B).
+ * @block_count : Number of blocks (half sectors, 256B) requested to be
+ * read/programmed.
+ * @result : Includes information about the status of the write counter
+ * (valid, expired) and result of the access made to the RPMB.
+ * @req_resp : Defines the type of request and response to/from the memory.
+ */
+struct rpmb_frame {
+ __u8 stuff[196];
+ __u8 key_mac[32];
+ __u8 data[256];
+ __u8 nonce[16];
+ __be32 write_counter;
+ __be16 addr;
+ __be16 block_count;
+ __be16 result;
+ __be16 req_resp;
+} __attribute__((packed));
+
+#define RPMB_PROGRAM_KEY 0x1 /* Program RPMB Authentication Key */
+#define RPMB_GET_WRITE_COUNTER 0x2 /* Read RPMB write counter */
+#define RPMB_WRITE_DATA 0x3 /* Write data to RPMB partition */
+#define RPMB_READ_DATA 0x4 /* Read data from RPMB partition */
+#define RPMB_RESULT_READ 0x5 /* Read result request (Internal) */
+
+#define RPMB_REQ2RESP(_OP) ((_OP) << 8)
+#define RPMB_RESP2REQ(_OP) ((_OP) >> 8)
+
+/* length of the part of the frame used for HMAC computation */
+#define hmac_data_len \
+ (sizeof(struct rpmb_frame) - offsetof(struct rpmb_frame, data))
+
+/**
+ * enum rpmb_op_result - rpmb operation results
+ *
+ * @RPMB_ERR_OK: operation successful
+ * @RPMB_ERR_GENERAL: general failure
+ * @RPMB_ERR_AUTH: mac doesn't match or ac calculation failure
+ * @RPMB_ERR_COUNTER: counter doesn't match or counter increment failure
+ * @RPMB_ERR_ADDRESS: address out of range or wrong address alignment
+ * @RPMB_ERR_WRITE: data, counter, or result write failure
+ * @RPMB_ERR_READ: data, counter, or result read failure
+ * @RPMB_ERR_NO_KEY: authentication key not yet programmed
+ *
+ * @RPMB_ERR_COUNTER_EXPIRED: counter expired
+ */
+enum rpmb_op_result {
+ RPMB_ERR_OK = 0x0000,
+ RPMB_ERR_GENERAL = 0x0001,
+ RPMB_ERR_AUTH = 0x0002,
+ RPMB_ERR_COUNTER = 0x0003,
+ RPMB_ERR_ADDRESS = 0x0004,
+ RPMB_ERR_WRITE = 0x0005,
+ RPMB_ERR_READ = 0x0006,
+ RPMB_ERR_NO_KEY = 0x0007,
+
+ RPMB_ERR_COUNTER_EXPIRED = 0x0080
+};
+
+/**
+ * struct rpmb_ioc_cmd - rpmb operation request command
+ *
+ * @req: request type: must match the in frame req_resp
+ * program key
+ * get write counter
+ * write/read data
+ * @in_frames_count: number of in frames
+ * @out_frames_count: number of out frames
+ * @in_frames_ptr: a pointer to the input frames buffer
+ * @out_frames_ptr: a pointer to output frames buffer
+ */
+struct rpmb_ioc_cmd {
+ __u32 req;
+ __u32 in_frames_count;
+ __u32 out_frames_count;
+ __aligned_u64 in_frames_ptr;
+ __aligned_u64 out_frames_ptr;
+};
+
+#define rpmb_ioc_cmd_set_in_frames(_ic, _ptr) \
+ (_ic).in_frames_ptr = (__aligned_u64)(intptr_t)(_ptr)
+#define rpmb_ioc_cmd_set_out_frames(_ic, _ptr) \
+ (_ic).out_frames_ptr = (__aligned_u64)(intptr_t)(_ptr)
+
+#define RPMB_IOC_REQ _IOWR(0xB5, 1, struct rpmb_ioc_cmd)
+
+#endif /* _UAPI_LINUX_RPMB_H_ */
The user space API is achieved via single synchronous IOCTL. The request is submitted in_frames_ptr pointer and received in out_frames_ptr. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> --- V2: use memdup_user Documentation/ioctl/ioctl-number.txt | 1 + MAINTAINERS | 1 + drivers/char/rpmb/Kconfig | 7 ++ drivers/char/rpmb/Makefile | 1 + drivers/char/rpmb/cdev.c | 207 +++++++++++++++++++++++++++++++++++ drivers/char/rpmb/core.c | 9 +- drivers/char/rpmb/rpmb-cdev.h | 31 ++++++ include/linux/rpmb.h | 78 ++----------- include/uapi/linux/rpmb.h | 120 ++++++++++++++++++++ 9 files changed, 384 insertions(+), 71 deletions(-) create mode 100644 drivers/char/rpmb/cdev.c create mode 100644 drivers/char/rpmb/rpmb-cdev.h create mode 100644 include/uapi/linux/rpmb.h