| Message ID | 1466102852-10063-1-git-send-email-ben.dooks@codethink.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 16/06/16 19:47, Ben Dooks wrote: > Fix the missing declarations of dml_start_xfer() and > dml_hw_init() by including mmci_qcom_dml.h to fix the > following warnings: > > drivers/mmc/host/mmci_qcom_dml.c:57:6: warning: symbol 'dml_start_xfer' was not declared. Should it be static? > drivers/mmc/host/mmci_qcom_dml.c:122:5: warning: symbol 'dml_hw_init' was not declared. Should it be static? > > Since the module build doesn't export symbols, also > export the symbols from the mmci_qcom_dml.c file as > otherwise the module link process won't work. > > It is possible this also fixes up module loading when > both drivers are built as modules and not inserted in > the correct order. > > Note, since this is a very small addition to the mmci > module, it would better to build it into the main mmci > driver (either by direct copy, or multiple linked > module) > > Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> > --- > V1..V2: > - deal with module build errors > V2..V3: > - add original authour and update list of recipients > --- I'm now wondering if I should split it into fixup the module issues and fix the include once those are fixed. Anyone want to comment? > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: linux-mmc@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > --- > drivers/mmc/host/mmci_qcom_dml.c | 3 +++ > drivers/mmc/host/mmci_qcom_dml.h | 2 +- > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c > index 2b7fc37..06858bd 100644 > --- a/drivers/mmc/host/mmci_qcom_dml.c > +++ b/drivers/mmc/host/mmci_qcom_dml.c > @@ -18,6 +18,7 @@ > #include <linux/mmc/host.h> > #include <linux/mmc/card.h> > #include "mmci.h" > +#include "mmci_qcom_dml.h" > > /* Registers */ > #define DML_CONFIG 0x00 > @@ -97,6 +98,7 @@ void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) > /* make sure the dml is configured before dma is triggered */ > wmb(); > } > +EXPORT_SYMBOL_GPL(dml_start_xfer); > > static int of_get_dml_pipe_index(struct device_node *np, const char *name) > { > @@ -175,3 +177,4 @@ int dml_hw_init(struct mmci_host *host, struct device_node *np) > > return 0; > } > +EXPORT_SYMBOL_GPL(dml_hw_init); > diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h > index 6e405d0..d77873d 100644 > --- a/drivers/mmc/host/mmci_qcom_dml.h > +++ b/drivers/mmc/host/mmci_qcom_dml.h > @@ -15,7 +15,7 @@ > #ifndef __MMC_QCOM_DML_H__ > #define __MMC_QCOM_DML_H__ > > -#ifdef CONFIG_MMC_QCOM_DML > +#if defined(CONFIG_MMC_QCOM_DML) || defined(CONFIG_MMC_QCOM_DML_MODULE) > int dml_hw_init(struct mmci_host *host, struct device_node *np); > void dml_start_xfer(struct mmci_host *host, struct mmc_data *data); > #else >
Thanks for the patch. On 16/06/16 19:47, Ben Dooks wrote: > Fix the missing declarations of dml_start_xfer() and > dml_hw_init() by including mmci_qcom_dml.h to fix the > following warnings: > > drivers/mmc/host/mmci_qcom_dml.c:57:6: warning: symbol 'dml_start_xfer' was not declared. Should it be static? > drivers/mmc/host/mmci_qcom_dml.c:122:5: warning: symbol 'dml_hw_init' was not declared. Should it be static? > > Since the module build doesn't export symbols, also > export the symbols from the mmci_qcom_dml.c file as > otherwise the module link process won't work. > > It is possible this also fixes up module loading when > both drivers are built as modules and not inserted in > the correct order. > > Note, since this is a very small addition to the mmci > module, it would better to build it into the main mmci > driver (either by direct copy, or multiple linked > module) > Let's fix this in a go, making it possible to insert this as a module. As this patch only fixes a part of the problem. Some comments below. > Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> > --- > V1..V2: > - deal with module build errors > V2..V3: > - add original authour and update list of recipients > --- > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: linux-mmc@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > --- > drivers/mmc/host/mmci_qcom_dml.c | 3 +++ > drivers/mmc/host/mmci_qcom_dml.h | 2 +- > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c > index 2b7fc37..06858bd 100644 > --- a/drivers/mmc/host/mmci_qcom_dml.c > +++ b/drivers/mmc/host/mmci_qcom_dml.c > @@ -18,6 +18,7 @@ > #include <linux/mmc/host.h> > #include <linux/mmc/card.h> > #include "mmci.h" also include #include <linux/module.h> > +#include "mmci_qcom_dml.h" > > /* Registers */ > #define DML_CONFIG 0x00 > @@ -97,6 +98,7 @@ void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) > /* make sure the dml is configured before dma is triggered */ > wmb(); > } > +EXPORT_SYMBOL_GPL(dml_start_xfer); > > static int of_get_dml_pipe_index(struct device_node *np, const char *name) > { > @@ -175,3 +177,4 @@ int dml_hw_init(struct mmci_host *host, struct device_node *np) > > return 0; > } > +EXPORT_SYMBOL_GPL(dml_hw_init); You would also need this at the end of the file, to be able to successfully insert the module. MODULE_DESCRIPTION("QCOM DML Driver"); MODULE_LICENSE("GPL v2"); > diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h > index 6e405d0..d77873d 100644 > --- a/drivers/mmc/host/mmci_qcom_dml.h > +++ b/drivers/mmc/host/mmci_qcom_dml.h > @@ -15,7 +15,7 @@ > #ifndef __MMC_QCOM_DML_H__ > #define __MMC_QCOM_DML_H__ > > -#ifdef CONFIG_MMC_QCOM_DML > +#if defined(CONFIG_MMC_QCOM_DML) || defined(CONFIG_MMC_QCOM_DML_MODULE) should be #if IS_ENABLED(CONFIG_MMC_QCOM_DML) > int dml_hw_init(struct mmci_host *host, struct device_node *np); > void dml_start_xfer(struct mmci_host *host, struct mmc_data *data); > #else > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday, June 16, 2016 7:47:32 PM CEST Ben Dooks wrote: > Note, since this is a very small addition to the mmci > module, it would better to build it into the main mmci > driver (either by direct copy, or multiple linked > module) I suspect the latter is actually what the author intended, except they accidentally made the symbol tristate and got the Makefile logic wrong. Most likely, the qcom developers never considered the case of having loadable modules. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c index 2b7fc37..06858bd 100644 --- a/drivers/mmc/host/mmci_qcom_dml.c +++ b/drivers/mmc/host/mmci_qcom_dml.c @@ -18,6 +18,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> #include "mmci.h" +#include "mmci_qcom_dml.h" /* Registers */ #define DML_CONFIG 0x00 @@ -97,6 +98,7 @@ void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) /* make sure the dml is configured before dma is triggered */ wmb(); } +EXPORT_SYMBOL_GPL(dml_start_xfer); static int of_get_dml_pipe_index(struct device_node *np, const char *name) { @@ -175,3 +177,4 @@ int dml_hw_init(struct mmci_host *host, struct device_node *np) return 0; } +EXPORT_SYMBOL_GPL(dml_hw_init); diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h index 6e405d0..d77873d 100644 --- a/drivers/mmc/host/mmci_qcom_dml.h +++ b/drivers/mmc/host/mmci_qcom_dml.h @@ -15,7 +15,7 @@ #ifndef __MMC_QCOM_DML_H__ #define __MMC_QCOM_DML_H__ -#ifdef CONFIG_MMC_QCOM_DML +#if defined(CONFIG_MMC_QCOM_DML) || defined(CONFIG_MMC_QCOM_DML_MODULE) int dml_hw_init(struct mmci_host *host, struct device_node *np); void dml_start_xfer(struct mmci_host *host, struct mmc_data *data); #else
Fix the missing declarations of dml_start_xfer() and dml_hw_init() by including mmci_qcom_dml.h to fix the following warnings: drivers/mmc/host/mmci_qcom_dml.c:57:6: warning: symbol 'dml_start_xfer' was not declared. Should it be static? drivers/mmc/host/mmci_qcom_dml.c:122:5: warning: symbol 'dml_hw_init' was not declared. Should it be static? Since the module build doesn't export symbols, also export the symbols from the mmci_qcom_dml.c file as otherwise the module link process won't work. It is possible this also fixes up module loading when both drivers are built as modules and not inserted in the correct order. Note, since this is a very small addition to the mmci module, it would better to build it into the main mmci driver (either by direct copy, or multiple linked module) Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> --- V1..V2: - deal with module build errors V2..V3: - add original authour and update list of recipients --- Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org --- drivers/mmc/host/mmci_qcom_dml.c | 3 +++ drivers/mmc/host/mmci_qcom_dml.h | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-)