@@ -110,6 +110,7 @@ struct mmc_blk_data {
#define MMC_BLK_WRITE BIT(1)
#define MMC_BLK_DISCARD BIT(2)
#define MMC_BLK_SECDISCARD BIT(3)
+#define MMC_BLK_SWCMDQ BIT(4)
/*
* Only set in main mmc_blk_data associated
@@ -1981,7 +1982,588 @@ static void mmc_blk_revert_packed_req(struct mmc_queue *mq,
mmc_blk_clear_packed(mq_rq);
}
-static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
+static int mmc_swcmdq_err_check(struct mmc_card *card,
+ struct mmc_async_req *areq)
+{
+ struct mmc_queue_req *mqrq = container_of(areq, struct mmc_queue_req,
+ mmc_active);
+ struct mmc_blk_request *brq = &mqrq->brq;
+ struct request *req = mqrq->req;
+ int err;
+
+ err = brq->data.error;
+ /* In the case of data errors, send stop */
+ if (err)
+ mmc_wait_for_cmd(card->host, &brq->stop, 0);
+ else
+ err = brq->cmd.error;
+
+ /* In the case of CRC errors when re-tuning is needed, retry */
+ if (err == -EILSEQ && card->host->need_retune)
+ return MMC_BLK_RETRY;
+
+ /* For other errors abort */
+ if (err)
+ return MMC_BLK_ABORT;
+
+ if (blk_rq_bytes(req) != brq->data.bytes_xfered)
+ return MMC_BLK_PARTIAL;
+
+ return MMC_BLK_SUCCESS;
+}
+
+static void mmc_swcmdq_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
+{
+ struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+ struct mmc_blk_request *brq = &mqrq->brq;
+ struct request *req = mqrq->req;
+ bool do_data_tag;
+
+ /*
+ * Reliable writes are used to implement Forced Unit Access and
+ * are supported only on MMCs.
+ */
+ bool do_rel_wr = (req->cmd_flags & REQ_FUA) &&
+ (rq_data_dir(req) == WRITE) &&
+ (md->flags & MMC_BLK_REL_WR);
+
+ memset(brq, 0, sizeof(struct mmc_blk_request));
+ brq->mrq.cmd = &brq->cmd;
+ brq->mrq.data = &brq->data;
+ brq->mrq.cap_cmd_during_tfr = true;
+
+ if (rq_data_dir(req) == READ) {
+ brq->cmd.opcode = MMC_EXECUTE_READ_TASK;
+ brq->data.flags = MMC_DATA_READ;
+ brq->stop.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ } else {
+ brq->cmd.opcode = MMC_EXECUTE_WRITE_TASK;
+ brq->data.flags = MMC_DATA_WRITE;
+ brq->stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ }
+ brq->cmd.arg = mqrq->task_id << 16;
+ brq->cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ brq->data.blksz = 512;
+ brq->data.blocks = blk_rq_sectors(req);
+
+ brq->stop.opcode = MMC_STOP_TRANSMISSION;
+ brq->stop.arg = 0;
+
+ /*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq->data.blocks > card->host->max_blk_count)
+ brq->data.blocks = card->host->max_blk_count;
+
+ if (do_rel_wr)
+ mmc_apply_rel_rw(brq, card, req);
+
+ /*
+ * Data tag is used only during writing meta data to speed
+ * up write and any subsequent read of this meta data
+ */
+ do_data_tag = (card->ext_csd.data_tag_unit_size) &&
+ (req->cmd_flags & REQ_META) &&
+ (rq_data_dir(req) == WRITE) &&
+ ((brq->data.blocks * brq->data.blksz) >=
+ card->ext_csd.data_tag_unit_size);
+
+ brq->cmd44.opcode = MMC_QUE_TASK_PARAMS;
+ brq->cmd44.arg = brq->data.blocks |
+ (do_rel_wr ? (1 << 31) : 0) |
+ ((rq_data_dir(req) == READ) ? (1 << 30) : 0) |
+ (do_data_tag ? (1 << 29) : 0) |
+ mqrq->task_id << 16;
+ brq->cmd44.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ brq->cmd45.opcode = MMC_QUE_TASK_ADDR;
+ brq->cmd45.arg = blk_rq_pos(req);
+
+ mmc_set_data_timeout(&brq->data, card);
+
+ brq->data.sg = mqrq->sg;
+ brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
+
+ /*
+ * Adjust the sg list so it is the same size as the
+ * request.
+ */
+ if (brq->data.blocks != blk_rq_sectors(req)) {
+ int i, data_size = brq->data.blocks << 9;
+ struct scatterlist *sg;
+
+ for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
+ data_size -= sg->length;
+ if (data_size <= 0) {
+ sg->length += data_size;
+ i++;
+ break;
+ }
+ }
+ brq->data.sg_len = i;
+ }
+
+ mqrq->mmc_active.mrq = &brq->mrq;
+ mqrq->mmc_active.err_check = mmc_swcmdq_err_check;
+
+ mmc_queue_bounce_pre(mqrq);
+}
+
+static int mmc_swcmdq_blk_err(struct mmc_card *card, int err)
+{
+ /* Re-try after CRC errors when re-tuning is needed */
+ if (err == -EILSEQ && card->host->need_retune)
+ return MMC_BLK_RETRY;
+
+ if (err)
+ return MMC_BLK_ABORT;
+
+ return 0;
+}
+
+#define SWCMDQ_ENQUEUE_ERR ( \
+ R1_OUT_OF_RANGE | \
+ R1_ADDRESS_ERROR | \
+ R1_BLOCK_LEN_ERROR | \
+ R1_WP_VIOLATION | \
+ R1_CC_ERROR | \
+ R1_ERROR | \
+ R1_COM_CRC_ERROR | \
+ R1_ILLEGAL_COMMAND)
+
+static int __mmc_swcmdq_enqueue(struct mmc_queue *mq,
+ struct mmc_queue_req *mqrq)
+{
+ struct mmc_card *card = mq->card;
+ int err;
+
+ mmc_swcmdq_prep(mq, mqrq);
+
+ err = mmc_wait_for_cmd(card->host, &mqrq->brq.cmd44, 0);
+ if (err)
+ goto out;
+
+ err = mmc_wait_for_cmd(card->host, &mqrq->brq.cmd45, 0);
+ if (err)
+ goto out;
+
+ /*
+ * Don't assume the task is queued if there are any error bits set in
+ * the response.
+ */
+ if (mqrq->brq.cmd45.resp[0] & SWCMDQ_ENQUEUE_ERR)
+ return MMC_BLK_ABORT;
+out:
+ return mmc_swcmdq_blk_err(card, err);
+}
+
+static int mmc_swcmdq_enqueue(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_queue_req *mqrq;
+
+ mqrq = mmc_queue_req_find(mq, req);
+ if (!mqrq) {
+ WARN_ON(1);
+ mmc_blk_requeue(mq->queue, req);
+ return 0;
+ }
+
+ /* Need to hold re-tuning so long as the queue is not empty */
+ if (mq->qcnt == 1)
+ mmc_retune_hold(mq->card->host);
+
+ return __mmc_swcmdq_enqueue(mq, mqrq);
+}
+
+static struct mmc_async_req *mmc_swcmdq_next(struct mmc_queue *mq)
+{
+ int i = __ffs(mq->qsr);
+
+ __clear_bit(i, &mq->qsr);
+
+ if (i >= mq->qdepth)
+ return NULL;
+
+ return &mq->mqrq[i].mmc_active;
+}
+
+static int mmc_get_qsr(struct mmc_card *card, u32 *qsr)
+{
+ struct mmc_command cmd = {0};
+ int err, retries = 3;
+
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16 | 1 << 15;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, retries);
+ if (err)
+ return err;
+
+ *qsr = cmd.resp[0];
+
+ return 0;
+}
+
+static int mmc_await_qsr(struct mmc_card *card, u32 *qsr)
+{
+ unsigned long timeout;
+ u32 status = 0;
+ int err;
+
+ timeout = jiffies + msecs_to_jiffies(10 * 1000);
+ while (!status) {
+ err = mmc_get_qsr(card, &status);
+ if (err)
+ return err;
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck with queued tasks\n",
+ mmc_hostname(card->host));
+ return -ETIMEDOUT;
+ }
+ }
+
+ *qsr = status;
+
+ return 0;
+}
+
+static int mmc_swcmdq_await_qsr(struct mmc_queue *mq, struct mmc_card *card,
+ bool wait)
+{
+ struct mmc_queue_req *mqrq;
+ u32 qsr;
+ int err;
+
+ if (wait)
+ err = mmc_await_qsr(card, &qsr);
+ else
+ err = mmc_get_qsr(card, &qsr);
+ if (err)
+ goto out_err;
+
+ mq->qsr = qsr;
+
+ if (card->host->areq) {
+ /*
+ * The active request remains in the QSR until completed. Remove
+ * it so that mq->qsr only contains ones that are ready but not
+ * executed.
+ */
+ mqrq = container_of(card->host->areq, struct mmc_queue_req,
+ mmc_active);
+ __clear_bit(mqrq->task_id, &mq->qsr);
+ }
+
+ if (mq->qsr)
+ mq->qsr_err = false;
+out_err:
+ if (err) {
+ /* Don't repeatedly retry if no progress is made */
+ if (mq->qsr_err)
+ return MMC_BLK_ABORT;
+ mq->qsr_err = true;
+ }
+
+ return mmc_swcmdq_blk_err(card, err);
+}
+
+static int mmc_swcmdq_execute(struct mmc_queue *mq, bool flush, bool requeuing,
+ bool new_req)
+{
+ struct mmc_card *card = mq->card;
+ struct mmc_async_req *next = NULL, *prev;
+ struct mmc_blk_request *brq;
+ struct mmc_queue_req *mqrq;
+ enum mmc_blk_status status;
+ struct request *req;
+ int active = card->host->areq ? 1 : 0;
+ int ret;
+
+ if (mq->prepared_areq) {
+ /*
+ * A request that has been prepared before (i.e. passed to
+ * mmc_start_req()) but not started because another new request
+ * turned up.
+ */
+ next = mq->prepared_areq;
+ } else if (requeuing) {
+ /* Just finish the active request */
+ next = NULL;
+ } else if (mq->qsr) {
+ /* Get the next task from the Queue Status Register */
+ next = mmc_swcmdq_next(mq);
+ } else if (mq->qcnt > active) {
+ /*
+ * There are queued tasks so read the Queue Status Register to
+ * see if any are ready. Wait for a ready task only if there is
+ * no active request and no new request.
+ */
+ ret = mmc_swcmdq_await_qsr(mq, card, !active && !new_req);
+ if (ret)
+ return ret;
+ if (mq->qsr)
+ next = mmc_swcmdq_next(mq);
+ }
+
+ if (next) {
+ /*
+ * Don't wake for a new request when waiting for the active
+ * request if there is another request ready to start.
+ */
+ if (active)
+ mmc_queue_set_wake(mq, false);
+ } else {
+ if (!active)
+ return 0;
+ /*
+ * Don't wake for a new request when flushing or the queue is
+ * full.
+ */
+ if (flush || mq->qcnt == mq->qdepth)
+ mmc_queue_set_wake(mq, false);
+ else
+ mmc_queue_set_wake(mq, true);
+ }
+
+ prev = mmc_start_req(card->host, next, (int *)&status);
+
+ if (status == MMC_BLK_NEW_REQUEST) {
+ mq->prepared_areq = next;
+ return status;
+ }
+
+ mq->prepared_areq = NULL;
+
+ if (!prev)
+ return 0;
+
+ mqrq = container_of(prev, struct mmc_queue_req, mmc_active);
+ brq = &mqrq->brq;
+ req = mqrq->req;
+
+ mmc_queue_bounce_post(mqrq);
+
+ switch (status) {
+ case MMC_BLK_SUCCESS:
+ case MMC_BLK_PARTIAL:
+ case MMC_BLK_SUCCESS_ERR:
+ mmc_blk_reset_success(mq->data, MMC_BLK_SWCMDQ);
+ ret = blk_end_request(req, 0, brq->data.bytes_xfered);
+ if (ret) {
+ if (!requeuing)
+ return __mmc_swcmdq_enqueue(mq, mqrq);
+ return 0;
+ }
+ break;
+ case MMC_BLK_NEW_REQUEST:
+ return status;
+ default:
+ if (mqrq->retry_cnt++) {
+ blk_end_request_all(req, -EIO);
+ break;
+ }
+ return status;
+ }
+
+ mmc_queue_req_free(mq, mqrq);
+
+ /* Release re-tuning when queue is empty */
+ if (!mq->qcnt)
+ mmc_retune_release(card->host);
+
+ return 0;
+}
+
+static int mmc_swcmdq_requeue_check(struct mmc_card *card,
+ struct mmc_async_req *areq)
+{
+ int ret = mmc_swcmdq_err_check(card, areq);
+
+ /*
+ * In the case of success, prevent mmc_start_req() from starting
+ * another request by returning MMC_BLK_SUCCESS_ERR.
+ */
+ return ret == MMC_BLK_SUCCESS ? MMC_BLK_SUCCESS_ERR : ret;
+}
+
+static int mmc_swcmdq_await_active(struct mmc_queue *mq)
+{
+ struct mmc_async_req *areq = mq->card->host->areq;
+ int err;
+
+ if (!areq)
+ return 0;
+
+ areq->err_check = mmc_swcmdq_requeue_check;
+
+ err = mmc_swcmdq_execute(mq, true, true, false);
+
+ /* The request will be requeued anyway, so ignore 'retry' */
+ if (err == MMC_BLK_RETRY)
+ err = 0;
+
+ return err;
+}
+
+static int mmc_swcmdq_discard_queue(struct mmc_queue *mq)
+{
+ struct mmc_card *card = mq->card;
+ struct mmc_command cmd = {0};
+ int err;
+
+ if (!mq->qcnt)
+ return 0;
+
+ cmd.opcode = MMC_CMDQ_TASK_MGMT;
+ cmd.arg = 1; /* Discard entire queue */
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ /* This is for recovery and the response is not needed, so ignore CRC */
+ cmd.flags &= ~MMC_RSP_CRC;
+
+ err = mmc_wait_for_cmd(mq->card->host, &cmd, 0);
+
+ mq->qsr = 0;
+
+ /* Release re-tuning when queue is empty */
+ mmc_retune_release(card->host);
+
+ return err;
+}
+
+static int __mmc_swcmdq_requeue(struct mmc_queue *mq)
+{
+ unsigned long i, qslots = mq->qslots;
+ int err;
+
+ if (qslots)
+ mmc_retune_hold(mq->card->host);
+
+ while (qslots) {
+ i = __ffs(qslots);
+ err = __mmc_swcmdq_enqueue(mq, &mq->mqrq[i]);
+ if (err)
+ return err;
+ __clear_bit(i, &qslots);
+ }
+
+ return 0;
+}
+
+static void __mmc_swcmdq_error_out(struct mmc_queue *mq)
+{
+ unsigned long i, qslots = mq->qslots;
+ struct request *req;
+
+ if (qslots)
+ mmc_retune_release(mq->card->host);
+
+ while (qslots) {
+ i = __ffs(qslots);
+ req = mq->mqrq[i].req;
+ blk_end_request_cur(req, -EIO);
+ mq->mqrq[i].req = NULL;
+ __clear_bit(i, &qslots);
+ }
+
+ mq->qslots = 0;
+ mq->qcnt = 0;
+}
+
+static int mmc_swcmdq_requeue(struct mmc_queue *mq)
+{
+ int err;
+
+ /* Wait for active request */
+ err = mmc_swcmdq_await_active(mq);
+ if (err)
+ return err;
+
+ err = mmc_swcmdq_discard_queue(mq);
+ if (err)
+ return err;
+
+ return __mmc_swcmdq_requeue(mq);
+}
+
+static void mmc_swcmdq_reset(struct mmc_queue *mq)
+{
+ /* Wait for active request ignoring errors */
+ mmc_swcmdq_await_active(mq);
+
+ /* Ensure the queue is discarded */
+ mmc_swcmdq_discard_queue(mq);
+
+ /* Reset and requeue else error out all requests */
+ if (mmc_blk_reset(mq->data, mq->card->host, MMC_BLK_SWCMDQ) ||
+ __mmc_swcmdq_requeue(mq))
+ __mmc_swcmdq_error_out(mq);
+}
+
+/*
+ * Recovery has 2 options:
+ * 1. Discard the queue and re-queue all requests. If that fails, fall back to
+ * option 2.
+ * 2. Reset and re-queue all requests. If that fails, error out all the
+ * requests.
+ * In either case, re-tuning will be done if needed after the queue becomes
+ * empty because re-tuning is released at that point.
+ */
+static void mmc_swcmdq_recovery(struct mmc_queue *mq, int err)
+{
+ switch (err) {
+ case MMC_BLK_RETRY:
+ err = mmc_swcmdq_requeue(mq);
+ if (!err)
+ break;
+ /* Fall through */
+ default:
+ mmc_swcmdq_reset(mq);
+ }
+}
+
+static int mmc_swcmdq_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_context_info *cntx = &mq->card->host->context_info;
+ bool flush = !req && !cntx->is_waiting_last_req;
+ int err;
+
+ /* Enqueue new requests */
+ if (req) {
+ err = mmc_swcmdq_enqueue(mq, req);
+ if (err)
+ mmc_swcmdq_recovery(mq, err);
+ }
+
+ /*
+ * Keep executing queued requests until the queue is empty or
+ * mmc_swcmdq_execute() asks for new requests by returning
+ * MMC_BLK_NEW_REQUEST.
+ */
+ while (mq->qcnt) {
+ /*
+ * Re-tuning can only be done when the queue is empty. Recovery
+ * for MMC_BLK_RETRY will discard the queue and re-queue all
+ * requests. At the point the queue is empty, re-tuning is
+ * released and will be done automatically before the next
+ * mmc_request.
+ */
+ if (mq->card->host->need_retune)
+ mmc_swcmdq_recovery(mq, MMC_BLK_RETRY);
+ err = mmc_swcmdq_execute(mq, flush, false, !!req);
+ if (err == MMC_BLK_NEW_REQUEST)
+ return 0;
+ if (err)
+ mmc_swcmdq_recovery(mq, err);
+ }
+
+ return 0;
+}
+
+static int __mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
@@ -2187,6 +2769,17 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
return 0;
}
+static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+
+ if (card->ext_csd.cmdq_en)
+ return mmc_swcmdq_issue_rw_rq(mq, req);
+ else
+ return __mmc_blk_issue_rw_rq(mq, req);
+}
+
static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
{
int ret;
@@ -61,6 +61,7 @@ struct mmc_queue_req *mmc_queue_req_find(struct mmc_queue *mq,
mqrq->req = req;
mq->qcnt += 1;
__set_bit(mqrq->task_id, &mq->qslots);
+ mqrq->retry_cnt = 0;
return mqrq;
}
@@ -321,7 +322,10 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
if (!mq->queue)
return -ENOMEM;
- mq->qdepth = 2;
+ if (card->ext_csd.cmdq_en)
+ mq->qdepth = card->ext_csd.cmdq_depth;
+ else
+ mq->qdepth = 2;
mq->mqrq = mmc_queue_alloc_mqrqs(mq, mq->qdepth);
if (!mq->mqrq)
goto cleanup_queue;
@@ -8,9 +8,13 @@ struct task_struct;
struct mmc_blk_request {
struct mmc_request mrq;
- struct mmc_command sbc;
+ union {
+ struct mmc_command sbc;
+ struct mmc_command cmd44;
+ };
struct mmc_command cmd;
struct mmc_command stop;
+ struct mmc_command cmd45;
struct mmc_data data;
int retune_retry_done;
};
@@ -43,6 +47,7 @@ struct mmc_queue_req {
enum mmc_packed_type cmd_type;
struct mmc_packed *packed;
int task_id;
+ unsigned int retry_cnt;
};
struct mmc_queue {
@@ -61,6 +66,10 @@ struct mmc_queue {
int qdepth;
int qcnt;
unsigned long qslots;
+ /* Following are defined for Software Command Queuing */
+ unsigned long qsr;
+ struct mmc_async_req *prepared_areq;
+ bool qsr_err;
};
extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
@@ -220,6 +220,7 @@ enum mmc_blk_status {
MMC_BLK_ECC_ERR,
MMC_BLK_NOMEDIUM,
MMC_BLK_NEW_REQUEST,
+ MMC_BLK_SUCCESS_ERR, /* Success but prevent starting another request */
};
/* The number of MMC physical partitions. These consist of:
eMMC Command Queuing is a feature added in version 5.1. The card maintains a queue of up to 32 data transfers. Commands CMD45/CMD45 are sent to queue up transfers in advance, and then one of the transfers is selected to "execute" by CMD46/CMD47 at which point data transfer actually begins. The advantage of command queuing is that the card can prepare for transfers in advance. That makes a big difference in the case of random reads because the card can start reading into its cache in advance. A v5.1 host controller can manage the command queue itself, but it is also possible for software to manage the queue using an non-v5.1 host controller - that is what Software Command Queuing is. Refer to the JEDEC (http://www.jedec.org/) eMMC v5.1 Specification for more information about Command Queuing. Two important aspects of Command Queuing that affect the implementation are: - only read/write requests are queued - the queue must be empty to send other commands, including re-tuning To support Software Command Queuing a separate function is provided to issue read/write requests (i.e. mmc_swcmdq_issue_rw_rq()) and the mmc_blk_request structure amended to cater for additional commands CMD44 and CMD45. There is a separate function (mmc_swcmdq_prep()) to prepare the needed commands, but transfers are started by mmc_start_req() like normal. mmc_swcmdq_issue_rw_rq() enqueues the new request and then executes tasks until the queue is empty or mmc_swcmdq_execute() asks for a new request. This puts mmc_swcmdq_execute() in control of the decision whether to queue more requests or wait for the active one. Recovery is invoked if anything goes wrong. Recovery has 2 options: 1. Discard the queue and re-queue all requests. If that fails, fall back to option 2. 2. Reset and re-queue all requests. If that fails, error out all the requests. In either case, re-tuning will be done if needed after the queue becomes empty because re-tuning is released at that point. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> --- drivers/mmc/card/block.c | 595 ++++++++++++++++++++++++++++++++++++++++++++++- drivers/mmc/card/queue.c | 6 +- drivers/mmc/card/queue.h | 11 +- include/linux/mmc/card.h | 1 + 4 files changed, 610 insertions(+), 3 deletions(-)