| Message ID | 1468309584-3591-2-git-send-email-aisheng.dong@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/07/16 10:46, Dong Aisheng wrote: > Switch to use the more robust common mmc_regulator_set_vqmmc() > function in MMC core which set the target voltage as close as > possible to target voltage. > > We did not re-factor the whole sdhci_start_signal_voltage_switch() > cause we want to keep the original signal switch order between host > and card to avoid potential break. > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci.c | 9 +++------ > 1 file changed, 3 insertions(+), 6 deletions(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 2ee8bfa77116..7894652b9929 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -1835,8 +1835,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, > sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); > > if (!IS_ERR(mmc->supply.vqmmc)) { > - ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000, > - 3600000); > + ret = mmc_regulator_set_vqmmc(mmc, ios); > if (ret) { > pr_warn("%s: Switching to 3.3V signalling voltage failed\n", > mmc_hostname(mmc)); > @@ -1859,8 +1858,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, > if (!(host->flags & SDHCI_SIGNALING_180)) > return -EINVAL; > if (!IS_ERR(mmc->supply.vqmmc)) { > - ret = regulator_set_voltage(mmc->supply.vqmmc, > - 1700000, 1950000); > + ret = mmc_regulator_set_vqmmc(mmc, ios); > if (ret) { > pr_warn("%s: Switching to 1.8V signalling voltage failed\n", > mmc_hostname(mmc)); > @@ -1892,8 +1890,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, > if (!(host->flags & SDHCI_SIGNALING_120)) > return -EINVAL; > if (!IS_ERR(mmc->supply.vqmmc)) { > - ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000, > - 1300000); > + ret = mmc_regulator_set_vqmmc(mmc, ios); > if (ret) { > pr_warn("%s: Switching to 1.2V signalling voltage failed\n", > mmc_hostname(mmc)); > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2ee8bfa77116..7894652b9929 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1835,8 +1835,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); if (!IS_ERR(mmc->supply.vqmmc)) { - ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000, - 3600000); + ret = mmc_regulator_set_vqmmc(mmc, ios); if (ret) { pr_warn("%s: Switching to 3.3V signalling voltage failed\n", mmc_hostname(mmc)); @@ -1859,8 +1858,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, if (!(host->flags & SDHCI_SIGNALING_180)) return -EINVAL; if (!IS_ERR(mmc->supply.vqmmc)) { - ret = regulator_set_voltage(mmc->supply.vqmmc, - 1700000, 1950000); + ret = mmc_regulator_set_vqmmc(mmc, ios); if (ret) { pr_warn("%s: Switching to 1.8V signalling voltage failed\n", mmc_hostname(mmc)); @@ -1892,8 +1890,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, if (!(host->flags & SDHCI_SIGNALING_120)) return -EINVAL; if (!IS_ERR(mmc->supply.vqmmc)) { - ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000, - 1300000); + ret = mmc_regulator_set_vqmmc(mmc, ios); if (ret) { pr_warn("%s: Switching to 1.2V signalling voltage failed\n", mmc_hostname(mmc));
Switch to use the more robust common mmc_regulator_set_vqmmc() function in MMC core which set the target voltage as close as possible to target voltage. We did not re-factor the whole sdhci_start_signal_voltage_switch() cause we want to keep the original signal switch order between host and card to avoid potential break. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- drivers/mmc/host/sdhci.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)