diff mbox

Use device_property_read instead of of_property_read in the dw_mmc driver

Message ID 1493134767-19170-1-git-send-email-dwoods@mellanox.com
State New
Headers show

Commit Message

David Woods April 25, 2017, 3:39 p.m. UTC
Using the device_property interfaces allows the dw_mmc driver to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods <dwoods@mellanox.com>
Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com>
---
 drivers/mmc/core/host.c   | 72 +++++++++++++++++++++++------------------------
 drivers/mmc/host/dw_mmc.c | 24 ++++++++--------
 2 files changed, 47 insertions(+), 49 deletions(-)

Comments

Ulf Hansson May 15, 2017, 9:36 a.m. UTC | #1
On 25 April 2017 at 17:39, David Woods <dwoods@mellanox.com> wrote:
> Using the device_property interfaces allows the dw_mmc driver to work
> on platforms which run on either device tree or ACPI.
>
> Signed-off-by: David Woods <dwoods@mellanox.com>
> Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com>
> ---
>  drivers/mmc/core/host.c   | 72 +++++++++++++++++++++++------------------------
>  drivers/mmc/host/dw_mmc.c | 24 ++++++++--------

Can you please split this to two separate changes. One for dw_mmc with
a proper prefix (mmc: dw_mmc:) and one for the mmc core (prefix "mmc:
core:").

Kind regards
Uffe

>  2 files changed, 47 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 3f8c85d..d2c059e 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -176,19 +176,17 @@ static void mmc_retune_timer(unsigned long data)
>   */
>  int mmc_of_parse(struct mmc_host *host)
>  {
> -       struct device_node *np;
> +       struct device *dev = host->parent;
>         u32 bus_width;
>         int ret;
>         bool cd_cap_invert, cd_gpio_invert = false;
>         bool ro_cap_invert, ro_gpio_invert = false;
>
> -       if (!host->parent || !host->parent->of_node)
> +       if (!dev)
>                 return 0;
>
> -       np = host->parent->of_node;
> -
>         /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
> -       if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
> +       if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
>                 dev_dbg(host->parent,
>                         "\"bus-width\" property is missing, assuming 1 bit.\n");
>                 bus_width = 1;
> @@ -210,7 +208,7 @@ int mmc_of_parse(struct mmc_host *host)
>         }
>
>         /* f_max is obtained from the optional "max-frequency" property */
> -       of_property_read_u32(np, "max-frequency", &host->f_max);
> +       device_property_read_u32(dev, "max-frequency", &host->f_max);
>
>         /*
>          * Configure CD and WP pins. They are both by default active low to
> @@ -225,12 +223,12 @@ int mmc_of_parse(struct mmc_host *host)
>          */
>
>         /* Parse Card Detection */
> -       if (of_property_read_bool(np, "non-removable")) {
> +       if (device_property_read_bool(dev, "non-removable")) {
>                 host->caps |= MMC_CAP_NONREMOVABLE;
>         } else {
> -               cd_cap_invert = of_property_read_bool(np, "cd-inverted");
> +               cd_cap_invert = device_property_read_bool(dev, "cd-inverted");
>
> -               if (of_property_read_bool(np, "broken-cd"))
> +               if (device_property_read_bool(dev, "broken-cd"))
>                         host->caps |= MMC_CAP_NEEDS_POLL;
>
>                 ret = mmc_gpiod_request_cd(host, "cd", 0, true,
> @@ -256,7 +254,7 @@ int mmc_of_parse(struct mmc_host *host)
>         }
>
>         /* Parse Write Protection */
> -       ro_cap_invert = of_property_read_bool(np, "wp-inverted");
> +       ro_cap_invert = device_property_read_bool(dev, "wp-inverted");
>
>         ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
>         if (!ret)
> @@ -264,64 +262,64 @@ int mmc_of_parse(struct mmc_host *host)
>         else if (ret != -ENOENT && ret != -ENOSYS)
>                 return ret;
>
> -       if (of_property_read_bool(np, "disable-wp"))
> +       if (device_property_read_bool(dev, "disable-wp"))
>                 host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
>
>         /* See the comment on CD inversion above */
>         if (ro_cap_invert ^ ro_gpio_invert)
>                 host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
>
> -       if (of_property_read_bool(np, "cap-sd-highspeed"))
> +       if (device_property_read_bool(dev, "cap-sd-highspeed"))
>                 host->caps |= MMC_CAP_SD_HIGHSPEED;
> -       if (of_property_read_bool(np, "cap-mmc-highspeed"))
> +       if (device_property_read_bool(dev, "cap-mmc-highspeed"))
>                 host->caps |= MMC_CAP_MMC_HIGHSPEED;
> -       if (of_property_read_bool(np, "sd-uhs-sdr12"))
> +       if (device_property_read_bool(dev, "sd-uhs-sdr12"))
>                 host->caps |= MMC_CAP_UHS_SDR12;
> -       if (of_property_read_bool(np, "sd-uhs-sdr25"))
> +       if (device_property_read_bool(dev, "sd-uhs-sdr25"))
>                 host->caps |= MMC_CAP_UHS_SDR25;
> -       if (of_property_read_bool(np, "sd-uhs-sdr50"))
> +       if (device_property_read_bool(dev, "sd-uhs-sdr50"))
>                 host->caps |= MMC_CAP_UHS_SDR50;
> -       if (of_property_read_bool(np, "sd-uhs-sdr104"))
> +       if (device_property_read_bool(dev, "sd-uhs-sdr104"))
>                 host->caps |= MMC_CAP_UHS_SDR104;
> -       if (of_property_read_bool(np, "sd-uhs-ddr50"))
> +       if (device_property_read_bool(dev, "sd-uhs-ddr50"))
>                 host->caps |= MMC_CAP_UHS_DDR50;
> -       if (of_property_read_bool(np, "cap-power-off-card"))
> +       if (device_property_read_bool(dev, "cap-power-off-card"))
>                 host->caps |= MMC_CAP_POWER_OFF_CARD;
> -       if (of_property_read_bool(np, "cap-mmc-hw-reset"))
> +       if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
>                 host->caps |= MMC_CAP_HW_RESET;
> -       if (of_property_read_bool(np, "cap-sdio-irq"))
> +       if (device_property_read_bool(dev, "cap-sdio-irq"))
>                 host->caps |= MMC_CAP_SDIO_IRQ;
> -       if (of_property_read_bool(np, "full-pwr-cycle"))
> +       if (device_property_read_bool(dev, "full-pwr-cycle"))
>                 host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
> -       if (of_property_read_bool(np, "keep-power-in-suspend"))
> +       if (device_property_read_bool(dev, "keep-power-in-suspend"))
>                 host->pm_caps |= MMC_PM_KEEP_POWER;
> -       if (of_property_read_bool(np, "wakeup-source") ||
> -           of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
> +       if (device_property_read_bool(dev, "wakeup-source") ||
> +           device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
>                 host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
> -       if (of_property_read_bool(np, "mmc-ddr-3_3v"))
> +       if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
>                 host->caps |= MMC_CAP_3_3V_DDR;
> -       if (of_property_read_bool(np, "mmc-ddr-1_8v"))
> +       if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
>                 host->caps |= MMC_CAP_1_8V_DDR;
> -       if (of_property_read_bool(np, "mmc-ddr-1_2v"))
> +       if (device_property_read_bool(dev, "mmc-ddr-1_2v"))
>                 host->caps |= MMC_CAP_1_2V_DDR;
> -       if (of_property_read_bool(np, "mmc-hs200-1_8v"))
> +       if (device_property_read_bool(dev, "mmc-hs200-1_8v"))
>                 host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
> -       if (of_property_read_bool(np, "mmc-hs200-1_2v"))
> +       if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
>                 host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
> -       if (of_property_read_bool(np, "mmc-hs400-1_8v"))
> +       if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
>                 host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
> -       if (of_property_read_bool(np, "mmc-hs400-1_2v"))
> +       if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
>                 host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
> -       if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
> +       if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
>                 host->caps2 |= MMC_CAP2_HS400_ES;
> -       if (of_property_read_bool(np, "no-sdio"))
> +       if (device_property_read_bool(dev, "no-sdio"))
>                 host->caps2 |= MMC_CAP2_NO_SDIO;
> -       if (of_property_read_bool(np, "no-sd"))
> +       if (device_property_read_bool(dev, "no-sd"))
>                 host->caps2 |= MMC_CAP2_NO_SD;
> -       if (of_property_read_bool(np, "no-mmc"))
> +       if (device_property_read_bool(dev, "no-mmc"))
>                 host->caps2 |= MMC_CAP2_NO_MMC;
>
> -       host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
> +       host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
>         if (host->dsr_req && (host->dsr & ~0xffff)) {
>                 dev_err(host->parent,
>                         "device tree specified broken value for DSR: 0x%x, ignoring\n",
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 8718432..3728c59 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2641,8 +2641,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>         host->slot[id] = slot;
>
>         mmc->ops = &dw_mci_ops;
> -       if (of_property_read_u32_array(host->dev->of_node,
> -                                      "clock-freq-min-max", freq, 2)) {
> +       if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
> +                                          freq, 2)) {
>                 mmc->f_min = DW_MCI_FREQ_MIN;
>                 mmc->f_max = DW_MCI_FREQ_MAX;
>         } else {
> @@ -2742,7 +2742,6 @@ static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
>         struct device *dev = host->dev;
> -       struct device_node *np = dev->of_node;
>
>         /*
>         * Check tansfer mode from HCON[17:16]
> @@ -2803,8 +2802,9 @@ static void dw_mci_init_dma(struct dw_mci *host)
>                 dev_info(host->dev, "Using internal DMA controller.\n");
>         } else {
>                 /* TRANS_MODE_EDMAC: check dma bindings again */
> -               if ((of_property_count_strings(np, "dma-names") < 0) ||
> -                   (!of_find_property(np, "dmas", NULL))) {
> +               if ((device_property_read_string_array(dev, "dma-names",
> +                                                      NULL, 0) < 0) ||
> +                   !device_property_present(dev, "dmas")) {
>                         goto no_dma;
>                 }
>                 host->dma_ops = &dw_mci_edmac_ops;
> @@ -2964,7 +2964,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>  {
>         struct dw_mci_board *pdata;
>         struct device *dev = host->dev;
> -       struct device_node *np = dev->of_node;
>         const struct dw_mci_drv_data *drv_data = host->drv_data;
>         int ret;
>         u32 clock_frequency;
> @@ -2981,20 +2980,21 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>         }
>
>         /* find out number of slots supported */
> -       of_property_read_u32(np, "num-slots", &pdata->num_slots);
> +       device_property_read_u32(dev, "num-slots", &pdata->num_slots);
>
> -       if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
> +       if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
>                 dev_info(dev,
>                          "fifo-depth property not found, using value of FIFOTH register as default\n");
>
> -       of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
> +       device_property_read_u32(dev, "card-detect-delay",
> +                                &pdata->detect_delay_ms);
>
> -       of_property_read_u32(np, "data-addr", &host->data_addr_override);
> +       device_property_read_u32(dev, "data-addr", &host->data_addr_override);
>
> -       if (of_get_property(np, "fifo-watermark-aligned", NULL))
> +       if (device_property_present(dev, "fifo-watermark-aligned"))
>                 host->wm_aligned = true;
>
> -       if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
> +       if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
>                 pdata->bus_hz = clock_frequency;
>
>         if (drv_data && drv_data->parse_dt) {
> --
> 2.7.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andy Shevchenko May 15, 2017, 1:30 p.m. UTC | #2
On Mon, May 15, 2017 at 12:36 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> On 25 April 2017 at 17:39, David Woods <dwoods@mellanox.com> wrote:
>> Using the device_property interfaces allows the dw_mmc driver to work
>> on platforms which run on either device tree or ACPI.

> Can you please split this to two separate changes. One for dw_mmc with
> a proper prefix (mmc: dw_mmc:) and one for the mmc core (prefix "mmc:
> core:").

Btw, for the core part of change I would recommend to check other API
functions which might go slightly different in case of ACPI vs DT vs
built-in device properties.

For example, if any code is using of_gpio header and of_ related stuff
it should be rethought as well (not sure if we would change there
anything, though worth to double check).
David Woods May 17, 2017, 10:07 p.m. UTC | #3
On 05/15/2017 09:30 AM, Andy Shevchenko wrote:
> On Mon, May 15, 2017 at 12:36 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>> On 25 April 2017 at 17:39, David Woods <dwoods@mellanox.com> wrote:
>>> Using the device_property interfaces allows the dw_mmc driver to work
>>> on platforms which run on either device tree or ACPI.
>> Can you please split this to two separate changes. One for dw_mmc with
>> a proper prefix (mmc: dw_mmc:) and one for the mmc core (prefix "mmc:
>> core:").

Yes, I will do that.

> Btw, for the core part of change I would recommend to check other API
> functions which might go slightly different in case of ACPI vs DT vs
> built-in device properties.
>
> For example, if any code is using of_gpio header and of_ related stuff
> it should be rethought as well (not sure if we would change there
> anything, though worth to double check).
>
I have not purged all references to of_ APIs from the core code. 
However, the ones which remain are specific to hardware I don't have, so 
I wouldn't be able to test those code paths.  Btw, there is no good 
reason I can see to include of_gpio.h here, none of those interfaces 
seem to be used.

-David Woods


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 3f8c85d..d2c059e 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -176,19 +176,17 @@  static void mmc_retune_timer(unsigned long data)
  */
 int mmc_of_parse(struct mmc_host *host)
 {
-	struct device_node *np;
+	struct device *dev = host->parent;
 	u32 bus_width;
 	int ret;
 	bool cd_cap_invert, cd_gpio_invert = false;
 	bool ro_cap_invert, ro_gpio_invert = false;
 
-	if (!host->parent || !host->parent->of_node)
+	if (!dev)
 		return 0;
 
-	np = host->parent->of_node;
-
 	/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
-	if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
+	if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
 		dev_dbg(host->parent,
 			"\"bus-width\" property is missing, assuming 1 bit.\n");
 		bus_width = 1;
@@ -210,7 +208,7 @@  int mmc_of_parse(struct mmc_host *host)
 	}
 
 	/* f_max is obtained from the optional "max-frequency" property */
-	of_property_read_u32(np, "max-frequency", &host->f_max);
+	device_property_read_u32(dev, "max-frequency", &host->f_max);
 
 	/*
 	 * Configure CD and WP pins. They are both by default active low to
@@ -225,12 +223,12 @@  int mmc_of_parse(struct mmc_host *host)
 	 */
 
 	/* Parse Card Detection */
-	if (of_property_read_bool(np, "non-removable")) {
+	if (device_property_read_bool(dev, "non-removable")) {
 		host->caps |= MMC_CAP_NONREMOVABLE;
 	} else {
-		cd_cap_invert = of_property_read_bool(np, "cd-inverted");
+		cd_cap_invert = device_property_read_bool(dev, "cd-inverted");
 
-		if (of_property_read_bool(np, "broken-cd"))
+		if (device_property_read_bool(dev, "broken-cd"))
 			host->caps |= MMC_CAP_NEEDS_POLL;
 
 		ret = mmc_gpiod_request_cd(host, "cd", 0, true,
@@ -256,7 +254,7 @@  int mmc_of_parse(struct mmc_host *host)
 	}
 
 	/* Parse Write Protection */
-	ro_cap_invert = of_property_read_bool(np, "wp-inverted");
+	ro_cap_invert = device_property_read_bool(dev, "wp-inverted");
 
 	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
 	if (!ret)
@@ -264,64 +262,64 @@  int mmc_of_parse(struct mmc_host *host)
 	else if (ret != -ENOENT && ret != -ENOSYS)
 		return ret;
 
-	if (of_property_read_bool(np, "disable-wp"))
+	if (device_property_read_bool(dev, "disable-wp"))
 		host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
 
 	/* See the comment on CD inversion above */
 	if (ro_cap_invert ^ ro_gpio_invert)
 		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 
-	if (of_property_read_bool(np, "cap-sd-highspeed"))
+	if (device_property_read_bool(dev, "cap-sd-highspeed"))
 		host->caps |= MMC_CAP_SD_HIGHSPEED;
-	if (of_property_read_bool(np, "cap-mmc-highspeed"))
+	if (device_property_read_bool(dev, "cap-mmc-highspeed"))
 		host->caps |= MMC_CAP_MMC_HIGHSPEED;
-	if (of_property_read_bool(np, "sd-uhs-sdr12"))
+	if (device_property_read_bool(dev, "sd-uhs-sdr12"))
 		host->caps |= MMC_CAP_UHS_SDR12;
-	if (of_property_read_bool(np, "sd-uhs-sdr25"))
+	if (device_property_read_bool(dev, "sd-uhs-sdr25"))
 		host->caps |= MMC_CAP_UHS_SDR25;
-	if (of_property_read_bool(np, "sd-uhs-sdr50"))
+	if (device_property_read_bool(dev, "sd-uhs-sdr50"))
 		host->caps |= MMC_CAP_UHS_SDR50;
-	if (of_property_read_bool(np, "sd-uhs-sdr104"))
+	if (device_property_read_bool(dev, "sd-uhs-sdr104"))
 		host->caps |= MMC_CAP_UHS_SDR104;
-	if (of_property_read_bool(np, "sd-uhs-ddr50"))
+	if (device_property_read_bool(dev, "sd-uhs-ddr50"))
 		host->caps |= MMC_CAP_UHS_DDR50;
-	if (of_property_read_bool(np, "cap-power-off-card"))
+	if (device_property_read_bool(dev, "cap-power-off-card"))
 		host->caps |= MMC_CAP_POWER_OFF_CARD;
-	if (of_property_read_bool(np, "cap-mmc-hw-reset"))
+	if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
 		host->caps |= MMC_CAP_HW_RESET;
-	if (of_property_read_bool(np, "cap-sdio-irq"))
+	if (device_property_read_bool(dev, "cap-sdio-irq"))
 		host->caps |= MMC_CAP_SDIO_IRQ;
-	if (of_property_read_bool(np, "full-pwr-cycle"))
+	if (device_property_read_bool(dev, "full-pwr-cycle"))
 		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
-	if (of_property_read_bool(np, "keep-power-in-suspend"))
+	if (device_property_read_bool(dev, "keep-power-in-suspend"))
 		host->pm_caps |= MMC_PM_KEEP_POWER;
-	if (of_property_read_bool(np, "wakeup-source") ||
-	    of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
+	if (device_property_read_bool(dev, "wakeup-source") ||
+	    device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
 		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-	if (of_property_read_bool(np, "mmc-ddr-3_3v"))
+	if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
 		host->caps |= MMC_CAP_3_3V_DDR;
-	if (of_property_read_bool(np, "mmc-ddr-1_8v"))
+	if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
 		host->caps |= MMC_CAP_1_8V_DDR;
-	if (of_property_read_bool(np, "mmc-ddr-1_2v"))
+	if (device_property_read_bool(dev, "mmc-ddr-1_2v"))
 		host->caps |= MMC_CAP_1_2V_DDR;
-	if (of_property_read_bool(np, "mmc-hs200-1_8v"))
+	if (device_property_read_bool(dev, "mmc-hs200-1_8v"))
 		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
-	if (of_property_read_bool(np, "mmc-hs200-1_2v"))
+	if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
 		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
-	if (of_property_read_bool(np, "mmc-hs400-1_8v"))
+	if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
 		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
-	if (of_property_read_bool(np, "mmc-hs400-1_2v"))
+	if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
 		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
-	if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
+	if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
 		host->caps2 |= MMC_CAP2_HS400_ES;
-	if (of_property_read_bool(np, "no-sdio"))
+	if (device_property_read_bool(dev, "no-sdio"))
 		host->caps2 |= MMC_CAP2_NO_SDIO;
-	if (of_property_read_bool(np, "no-sd"))
+	if (device_property_read_bool(dev, "no-sd"))
 		host->caps2 |= MMC_CAP2_NO_SD;
-	if (of_property_read_bool(np, "no-mmc"))
+	if (device_property_read_bool(dev, "no-mmc"))
 		host->caps2 |= MMC_CAP2_NO_MMC;
 
-	host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
+	host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
 	if (host->dsr_req && (host->dsr & ~0xffff)) {
 		dev_err(host->parent,
 			"device tree specified broken value for DSR: 0x%x, ignoring\n",
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 8718432..3728c59 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2641,8 +2641,8 @@  static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 	host->slot[id] = slot;
 
 	mmc->ops = &dw_mci_ops;
-	if (of_property_read_u32_array(host->dev->of_node,
-				       "clock-freq-min-max", freq, 2)) {
+	if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
+					   freq, 2)) {
 		mmc->f_min = DW_MCI_FREQ_MIN;
 		mmc->f_max = DW_MCI_FREQ_MAX;
 	} else {
@@ -2742,7 +2742,6 @@  static void dw_mci_init_dma(struct dw_mci *host)
 {
 	int addr_config;
 	struct device *dev = host->dev;
-	struct device_node *np = dev->of_node;
 
 	/*
 	* Check tansfer mode from HCON[17:16]
@@ -2803,8 +2802,9 @@  static void dw_mci_init_dma(struct dw_mci *host)
 		dev_info(host->dev, "Using internal DMA controller.\n");
 	} else {
 		/* TRANS_MODE_EDMAC: check dma bindings again */
-		if ((of_property_count_strings(np, "dma-names") < 0) ||
-		    (!of_find_property(np, "dmas", NULL))) {
+		if ((device_property_read_string_array(dev, "dma-names",
+						       NULL, 0) < 0) ||
+		    !device_property_present(dev, "dmas")) {
 			goto no_dma;
 		}
 		host->dma_ops = &dw_mci_edmac_ops;
@@ -2964,7 +2964,6 @@  static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 {
 	struct dw_mci_board *pdata;
 	struct device *dev = host->dev;
-	struct device_node *np = dev->of_node;
 	const struct dw_mci_drv_data *drv_data = host->drv_data;
 	int ret;
 	u32 clock_frequency;
@@ -2981,20 +2980,21 @@  static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 	}
 
 	/* find out number of slots supported */
-	of_property_read_u32(np, "num-slots", &pdata->num_slots);
+	device_property_read_u32(dev, "num-slots", &pdata->num_slots);
 
-	if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
+	if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
 		dev_info(dev,
 			 "fifo-depth property not found, using value of FIFOTH register as default\n");
 
-	of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+	device_property_read_u32(dev, "card-detect-delay",
+				 &pdata->detect_delay_ms);
 
-	of_property_read_u32(np, "data-addr", &host->data_addr_override);
+	device_property_read_u32(dev, "data-addr", &host->data_addr_override);
 
-	if (of_get_property(np, "fifo-watermark-aligned", NULL))
+	if (device_property_present(dev, "fifo-watermark-aligned"))
 		host->wm_aligned = true;
 
-	if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
+	if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
 		pdata->bus_hz = clock_frequency;
 
 	if (drv_data && drv_data->parse_dt) {