Message ID | 1547176135-2470-1-git-send-email-skomatineni@nvidia.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [V8,1/3] dt-bindings: mmc: tegra: Add supports-cqe property | expand |
On Thu, Jan 10, 2019 at 07:08:53PM -0800, Sowjanya Komatineni wrote: > Add supports-cqe optional property for Tegra SDMMC. > > Tegra186 and Tegra194 supports HW Command queue only > on SDMMC4 controller. This property is used to identify > command queue support controller in the tegra sdhci driver. > > Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> > --- > Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt > index 32b4b4e41923..fb14c2c8d7ee 100644 > --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt > +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt > @@ -72,6 +72,10 @@ Optional properties for Tegra210 and Tegra186: > - nvidia,default-trim : Specify the default outbound clock trimmer > value. > - nvidia,dqs-trim : Specify DQS trim value for HS400 timing > +- supports-cqe : The presence of this property indicates that the > + corresponding controller supports HW command queue feature. > + Tegra186 and Tegra194 has 4 SDMMC Controllers and only SDMMC4 > + controller supports HW Command Queue with eMMC device. Don't SDHCI capability bits do this? If not, this should probably be common. Rob
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 32b4b4e41923..fb14c2c8d7ee 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -72,6 +72,10 @@ Optional properties for Tegra210 and Tegra186: - nvidia,default-trim : Specify the default outbound clock trimmer value. - nvidia,dqs-trim : Specify DQS trim value for HS400 timing +- supports-cqe : The presence of this property indicates that the + corresponding controller supports HW command queue feature. + Tegra186 and Tegra194 has 4 SDMMC Controllers and only SDMMC4 + controller supports HW Command Queue with eMMC device. Notes on the pad calibration pull up and pulldown offset values: - The property values are drive codes which are programmed into the
Add supports-cqe optional property for Tegra SDMMC. Tegra186 and Tegra194 supports HW Command queue only on SDMMC4 controller. This property is used to identify command queue support controller in the tegra sdhci driver. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> --- Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 4 ++++ 1 file changed, 4 insertions(+)