diff mbox series

[V1,1/2] arm64: tegra: fix default tap and trim values

Message ID 1555011474-20107-1-git-send-email-skomatineni@nvidia.com (mailing list archive)
State New, archived
Headers show
Series [V1,1/2] arm64: tegra: fix default tap and trim values | expand

Commit Message

Sowjanya Komatineni April 11, 2019, 7:37 p.m. UTC 
Default tap and trim values are incorrect for Tegra186 SDMMC4.
This patch fixes it.

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Thierry Reding April 12, 2019, 3:37 p.m. UTC | #1 
On Thu, Apr 11, 2019 at 12:37:53PM -0700, Sowjanya Komatineni wrote:
> Default tap and trim values are incorrect for Tegra186 SDMMC4.
> This patch fixes it.
> 
> Tested-by: Jon Hunter <jonathanh@nvidia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

Thierry
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 97aeb946ed5e..472f55fe9488 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -317,8 +317,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
 		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
 		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
-		nvidia,default-tap = <0x5>;
-		nvidia,default-trim = <0x9>;
+		nvidia,default-tap = <0x9>;
+		nvidia,default-trim = <0x5>;
 		nvidia,dqs-trim = <63>;
 		mmc-hs400-1_8v;
 		status = "disabled";