| Message ID | 1563774880-8061-10-git-send-email-wahrenst@gmx.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: Add minimal Raspberry Pi 4 support | expand |
On 22/07/2019 07:54, Stefan Wahren wrote: > Add a new compatible for the additional emmc2 controller > on BCM2711 and clearify usage. > > Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Matthias Brugger <mbrugger@suse.com> > --- > Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt > index fa90d25..09d87cc 100644 > --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt > +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt > @@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller. > Required properties: > - compatible : Should be one of the following > "brcm,bcm2835-sdhci" > + "brcm,bcm2711-emmc2" > "brcm,sdhci-iproc-cygnus" > "brcm,sdhci-iproc" > > -Use brcm2835-sdhci for Rasperry PI. > +Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and > +bcm2711-emmc2 for the additional eMMC2 controller on BCM2711. > > Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers > restricted to 32bit host accesses to SDHCI registers. > -- > 2.7.4 > >
On Mon, 22 Jul 2019 at 07:56, Stefan Wahren <wahrenst@gmx.net> wrote: > > Add a new compatible for the additional emmc2 controller > on BCM2711 and clearify usage. > > Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Applied for next, thanks! Kind regards Uffe > --- > Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt > index fa90d25..09d87cc 100644 > --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt > +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt > @@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller. > Required properties: > - compatible : Should be one of the following > "brcm,bcm2835-sdhci" > + "brcm,bcm2711-emmc2" > "brcm,sdhci-iproc-cygnus" > "brcm,sdhci-iproc" > > -Use brcm2835-sdhci for Rasperry PI. > +Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and > +bcm2711-emmc2 for the additional eMMC2 controller on BCM2711. > > Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers > restricted to 32bit host accesses to SDHCI registers. > -- > 2.7.4 >
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt index fa90d25..09d87cc 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -6,10 +6,12 @@ by mmc.txt and the properties that represent the IPROC SDHCI controller. Required properties: - compatible : Should be one of the following "brcm,bcm2835-sdhci" + "brcm,bcm2711-emmc2" "brcm,sdhci-iproc-cygnus" "brcm,sdhci-iproc" -Use brcm2835-sdhci for Rasperry PI. +Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and +bcm2711-emmc2 for the additional eMMC2 controller on BCM2711. Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers restricted to 32bit host accesses to SDHCI registers.
Add a new compatible for the additional emmc2 controller on BCM2711 and clearify usage. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> --- Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) -- 2.7.4