diff mbox series

[11/18] dt-bindings: pinctrl: bcm2835: Add brcm,bcm2711 compatible

Message ID 1563776607-8368-2-git-send-email-wahrenst@gmx.net (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Stefan Wahren July 22, 2019, 6:23 a.m. UTC
Add a new compatible for the BCM2711.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 +
 1 file changed, 1 insertion(+)

--
2.7.4

Comments

Linus Walleij Aug. 5, 2019, 9:30 a.m. UTC | #1
On Mon, Jul 22, 2019 at 8:23 AM Stefan Wahren <wahrenst@gmx.net> wrote:

> Add a new compatible for the BCM2711.
>
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
(...)
> +  "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl

Completely uncontroversial so patch applied.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index ac6d614..3cab733 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -8,6 +8,7 @@  Required properties:
 - compatible: should be one of:
   "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
   "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
+  "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
 - reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the