diff mbox series

[4/6,v2] dt-bindings: MMC: Add X1000 bindings.

Message ID 1570857203-49192-5-git-send-email-zhouyanjie@zoho.com (mailing list archive)
State New, archived
Headers show
Series [1/6,v2] MMC: Ingenic: Add 8bit mode support. | expand

Commit Message

Zhou Yanjie Oct. 12, 2019, 5:13 a.m. UTC 
Add the MMC bindings for the X1000 Soc from Ingenic.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 Documentation/devicetree/bindings/mmc/jz4740.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Rob Herring (Arm) Oct. 14, 2019, 6:15 p.m. UTC | #1 
On Sat, 12 Oct 2019 13:13:18 +0800, Zhou Yanjie wrote:
> Add the MMC bindings for the X1000 Soc from Ingenic.
> 
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
> ---
>  Documentation/devicetree/bindings/mmc/jz4740.txt | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt
index 13796fe..453d3b9 100644
--- a/Documentation/devicetree/bindings/mmc/jz4740.txt
+++ b/Documentation/devicetree/bindings/mmc/jz4740.txt
@@ -1,8 +1,8 @@ 
-* Ingenic JZ47xx MMC controllers
+* Ingenic XBurst MMC controllers
 
 This file documents the device tree properties used for the MMC controller in
-Ingenic JZ4740/JZ4780 SoCs. These are in addition to the core MMC properties
-described in mmc.txt.
+Ingenic JZ4740/JZ4760/JZ4780/X1000 SoCs. These are in addition to the core MMC
+properties described in mmc.txt.
 
 Required properties:
 - compatible: Should be one of the following:
@@ -10,6 +10,7 @@  Required properties:
   - "ingenic,jz4725b-mmc" for the JZ4725B
   - "ingenic,jz4760-mmc" for the JZ4760
   - "ingenic,jz4780-mmc" for the JZ4780
+  - "ingenic,x1000-mmc" for the X1000
 - reg: Should contain the MMC controller registers location and length.
 - interrupts: Should contain the interrupt specifier of the MMC controller.
 - clocks: Clock for the MMC controller.