Message ID | 1579519045-26467-1-git-send-email-vbadigan@codeaurora.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [V2,1/2] mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size | expand |
On 20/01/20 1:17 pm, Veerabhadrarao Badiganti wrote: > Let a vendor driver supply the maximum descriptor size that it > can operate on. ADMA descriptor table would be allocated using this > supplied size. > If any SD Host controller is of version prior to v4.10 spec > but supports 16byte descriptor, this change allows them to supply > correct descriptor size for ADMA table allocation. > > Also let a vendor driver update the descriptor size by overriding > sdhc_host->desc_size if it has to operates on a different descriptor > sizes in different conditions. A couple of minor tweaks below sorry. > > Suggested-by: Adrian Hunter <adrian.hunter@intel.com> > Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> > --- > drivers/mmc/host/sdhci.c | 13 +++++++------ > drivers/mmc/host/sdhci.h | 3 ++- > 2 files changed, 9 insertions(+), 7 deletions(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 3140fe2..44fb446 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -3822,14 +3822,15 @@ int sdhci_setup_host(struct sdhci_host *host) > void *buf; > > if (host->flags & SDHCI_USE_64_BIT_DMA) { > - host->adma_table_sz = host->adma_table_cnt * > - SDHCI_ADMA2_64_DESC_SZ(host); > - host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); > + if (!host->alloc_desc_sz) > + host->alloc_desc_sz = > + SDHCI_ADMA2_64_DESC_SZ(host); > } else { > - host->adma_table_sz = host->adma_table_cnt * > - SDHCI_ADMA2_32_DESC_SZ; > - host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; > + host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ; > } The following is simpler: if (!(host->flags & SDHCI_USE_64_BIT_DMA)) host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ; else if (!host->alloc_desc_sz) host->alloc_desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); > + host->desc_sz = host->alloc_desc_sz; > + host->adma_table_sz = host->adma_table_cnt * > + host->desc_sz; Wrap is not needed > > host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN; > /* > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index 0ed3e0e..10bda3a 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -554,7 +554,8 @@ struct sdhci_host { > dma_addr_t adma_addr; /* Mapped ADMA descr. table */ > dma_addr_t align_addr; /* Mapped bounce buffer */ > > - unsigned int desc_sz; /* ADMA descriptor size */ > + unsigned int desc_sz; /* ADMA current descriptor size */ > + unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ > > struct workqueue_struct *complete_wq; /* Request completion wq */ > struct work_struct complete_work; /* Request completion work */ >
On Mon, 20 Jan 2020 at 12:26, Veerabhadrarao Badiganti <vbadigan@codeaurora.org> wrote: > > Let a vendor driver supply the maximum descriptor size that it > can operate on. ADMA descriptor table would be allocated using this > supplied size. > If any SD Host controller is of version prior to v4.10 spec > but supports 16byte descriptor, this change allows them to supply > correct descriptor size for ADMA table allocation. > > Also let a vendor driver update the descriptor size by overriding > sdhc_host->desc_size if it has to operates on a different descriptor > sizes in different conditions. > > Suggested-by: Adrian Hunter <adrian.hunter@intel.com> > Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Applied for next, and by adding Adrian's ack, thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci.c | 13 +++++++------ > drivers/mmc/host/sdhci.h | 3 ++- > 2 files changed, 9 insertions(+), 7 deletions(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 3140fe2..44fb446 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -3822,14 +3822,15 @@ int sdhci_setup_host(struct sdhci_host *host) > void *buf; > > if (host->flags & SDHCI_USE_64_BIT_DMA) { > - host->adma_table_sz = host->adma_table_cnt * > - SDHCI_ADMA2_64_DESC_SZ(host); > - host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); > + if (!host->alloc_desc_sz) > + host->alloc_desc_sz = > + SDHCI_ADMA2_64_DESC_SZ(host); > } else { > - host->adma_table_sz = host->adma_table_cnt * > - SDHCI_ADMA2_32_DESC_SZ; > - host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; > + host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ; > } > + host->desc_sz = host->alloc_desc_sz; > + host->adma_table_sz = host->adma_table_cnt * > + host->desc_sz; > > host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN; > /* > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index 0ed3e0e..10bda3a 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -554,7 +554,8 @@ struct sdhci_host { > dma_addr_t adma_addr; /* Mapped ADMA descr. table */ > dma_addr_t align_addr; /* Mapped bounce buffer */ > > - unsigned int desc_sz; /* ADMA descriptor size */ > + unsigned int desc_sz; /* ADMA current descriptor size */ > + unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ > > struct workqueue_struct *complete_wq; /* Request completion wq */ > struct work_struct complete_work; /* Request completion work */ > -- > Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 3140fe2..44fb446 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3822,14 +3822,15 @@ int sdhci_setup_host(struct sdhci_host *host) void *buf; if (host->flags & SDHCI_USE_64_BIT_DMA) { - host->adma_table_sz = host->adma_table_cnt * - SDHCI_ADMA2_64_DESC_SZ(host); - host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); + if (!host->alloc_desc_sz) + host->alloc_desc_sz = + SDHCI_ADMA2_64_DESC_SZ(host); } else { - host->adma_table_sz = host->adma_table_cnt * - SDHCI_ADMA2_32_DESC_SZ; - host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; + host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ; } + host->desc_sz = host->alloc_desc_sz; + host->adma_table_sz = host->adma_table_cnt * + host->desc_sz; host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN; /* diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0ed3e0e..10bda3a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -554,7 +554,8 @@ struct sdhci_host { dma_addr_t adma_addr; /* Mapped ADMA descr. table */ dma_addr_t align_addr; /* Mapped bounce buffer */ - unsigned int desc_sz; /* ADMA descriptor size */ + unsigned int desc_sz; /* ADMA current descriptor size */ + unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ struct workqueue_struct *complete_wq; /* Request completion wq */ struct work_struct complete_work; /* Request completion work */
Let a vendor driver supply the maximum descriptor size that it can operate on. ADMA descriptor table would be allocated using this supplied size. If any SD Host controller is of version prior to v4.10 spec but supports 16byte descriptor, this change allows them to supply correct descriptor size for ADMA table allocation. Also let a vendor driver update the descriptor size by overriding sdhc_host->desc_size if it has to operates on a different descriptor sizes in different conditions. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> --- drivers/mmc/host/sdhci.c | 13 +++++++------ drivers/mmc/host/sdhci.h | 3 ++- 2 files changed, 9 insertions(+), 7 deletions(-)