[044/177] sdio: allow non-standard SDIO cards

Commit Message

Andrew Morton Aug. 11, 2010, 1:01 a.m. UTC

None

Patch

diff -puN drivers/mmc/core/sdio.c~sdio-allow-non-standard-sdio-cards drivers/mmc/core/sdio.c
--- a/drivers/mmc/core/sdio.c~sdio-allow-non-standard-sdio-cards
+++ a/drivers/mmc/core/sdio.c
@@ -63,13 +63,19 @@  static int sdio_init_func(struct mmc_car
 
 	func->num = fn;
 
-	ret = sdio_read_fbr(func);
-	if (ret)
-		goto fail;
+	if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
+		ret = sdio_read_fbr(func);
+		if (ret)
+			goto fail;
 
-	ret = sdio_read_func_cis(func);
-	if (ret)
-		goto fail;
+		ret = sdio_read_func_cis(func);
+		if (ret)
+			goto fail;
+	} else {
+		func->vendor = func->card->cis.vendor;
+		func->device = func->card->cis.device;
+		func->max_blksize = func->card->cis.blksize;
+	}
 
 	card->sdio_func[fn - 1] = func;
 
@@ -412,6 +418,23 @@  static int mmc_sdio_init_card(struct mmc
 			goto remove;
 	}
 
+	if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
+		/*
+		 * This is non-standard SDIO device, meaning it doesn't
+		 * have any CIA (Common I/O area) registers present.
+		 * It's host's responsibility to fill cccr and cis
+		 * structures in init_card().
+		 */
+		mmc_set_clock(host, card->cis.max_dtr);
+
+		if (card->cccr.high_speed) {
+			mmc_card_set_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+		}
+
+		goto finish;
+	}
+
 	/*
 	 * Read the common registers.
 	 */
@@ -480,6 +503,7 @@  static int mmc_sdio_init_card(struct mmc
 	else if (err)
 		goto remove;
 
+finish:
 	if (!oldcard)
 		host->card = card;
 	return 0;
diff -puN include/linux/mmc/card.h~sdio-allow-non-standard-sdio-cards include/linux/mmc/card.h
--- a/include/linux/mmc/card.h~sdio-allow-non-standard-sdio-cards
+++ a/include/linux/mmc/card.h
@@ -103,6 +103,8 @@  struct mmc_card {
 #define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
 #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
 						/* for byte mode */
+#define MMC_QUIRK_NONSTD_SDIO	(1<<2)		/* non-standard SDIO card attached */
+						/* (missing CIA registers) */
 
 	u32			raw_cid[4];	/* raw card CID */
 	u32			raw_csd[4];	/* raw card CSD */