| Message ID | 20110706091833.GT6069@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Jul 06, 2011 at 11:18:33AM +0200, Sascha Hauer wrote: > dmaengine expects the maxburst parameter in words, not bytes. > The imxdma driver and its users do this wrong. Fix this. > > As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work > with imx-dma. This broke the driver with imx-sdma support which > correctly takes the maxburst parameter in words. This patch > puts the sdma based sound back to work. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Probably makes sense to send via the ARM tree unless there's merge issues? -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2011-07-06 at 08:03 -0700, Mark Brown wrote: > On Wed, Jul 06, 2011 at 11:18:33AM +0200, Sascha Hauer wrote: > > dmaengine expects the maxburst parameter in words, not bytes. > > The imxdma driver and its users do this wrong. Fix this. > > > > As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work > > with imx-dma. This broke the driver with imx-sdma support which > > correctly takes the maxburst parameter in words. This patch > > puts the sdma based sound back to work. > > Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> > > Probably makes sense to send via the ARM tree unless there's merge > issues? Sure, I dont have naything on this driver in my next and previous updates for Sascha went thru imx tree, so would make sense for these to go that way as well ~Vinod Koul Intel Corp. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index e18eaab..d99f71c 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -135,7 +135,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, if (ret) return ret; - imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level); + imx_dma_config_burstlen(imxdmac->imxdma_channel, + imxdmac->watermark_level * imxdmac->word_size); return 0; default: diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index cc20e02..14aa213 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -715,13 +715,13 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) int burstlen, ret; /* - * use burstlen of 64 in 4 bit mode (--> reg value 0) - * use burstlen of 16 in 1 bit mode (--> reg value 16) + * use burstlen of 64 (16 words) in 4 bit mode (--> reg value 0) + * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16) */ if (ios->bus_width == MMC_BUS_WIDTH_4) - burstlen = 64; - else burstlen = 16; + else + burstlen = 4; if (mxcmci_use_dma(host) && burstlen != host->burstlen) { host->burstlen = burstlen; diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index 4173b3d..43fdc24f 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream, slave_config.direction = DMA_TO_DEVICE; slave_config.dst_addr = dma_params->dma_addr; slave_config.dst_addr_width = buswidth; - slave_config.dst_maxburst = dma_params->burstsize * buswidth; + slave_config.dst_maxburst = dma_params->burstsize; } else { slave_config.direction = DMA_FROM_DEVICE; slave_config.src_addr = dma_params->dma_addr; slave_config.src_addr_width = buswidth; - slave_config.src_maxburst = dma_params->burstsize * buswidth; + slave_config.src_maxburst = dma_params->burstsize; } ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
dmaengine expects the maxburst parameter in words, not bytes. The imxdma driver and its users do this wrong. Fix this. As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work with imx-dma. This broke the driver with imx-sdma support which correctly takes the maxburst parameter in words. This patch puts the sdma based sound back to work. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- I made this as a cross subsystem patch to maintain bisectability. I suggest to push it either via my tree or the dmaengine tree. drivers/dma/imx-dma.c | 3 ++- drivers/mmc/host/mxcmmc.c | 8 ++++---- sound/soc/imx/imx-pcm-dma-mx2.c | 4 ++-- 3 files changed, 8 insertions(+), 7 deletions(-)