Message ID | 20141202115629.GA27638@asutoshd-ics.in.qualcomm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 12/2/2014 3:56 AM, Sujit Reddy Thumma wrote: > eMMC cards with EXT_CSD version >= 7, optionally support command > queuing feature as defined by Jedec eMMC5.1. Add support for probing > command queue feature for such type of cards. > > Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> > Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> > --- > drivers/mmc/core/mmc.c | 15 +++++++++++++++ > include/linux/mmc/card.h | 7 +++++++ > include/linux/mmc/mmc.h | 6 ++++++ > 3 files changed, 28 insertions(+) > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c > index 1ab5f3a..0ef3af5 100644 > --- a/drivers/mmc/core/mmc.c > +++ b/drivers/mmc/core/mmc.c > @@ -571,6 +571,21 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) > card->ext_csd.data_sector_size = 512; > } > > + if (card->ext_csd.rev >= 7) { > + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; > + if (card->ext_csd.cmdq_support) > + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; > + } Remove duplicated code. > + > + if (card->ext_csd.rev >= 7) { > + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; > + if (card->ext_csd.cmdq_support) > + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; From the spec (7.4.19 CMDQ_DEPTH [307]) [4:0]: N, a parameter used to calculate the Queue Depth of task queue in the device. Queue Depth = N+1. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2 December 2014 at 12:56, Sujit Reddy Thumma <sthumma@codeaurora.org> wrote: > eMMC cards with EXT_CSD version >= 7, optionally support command > queuing feature as defined by Jedec eMMC5.1. Add support for probing > command queue feature for such type of cards. > > Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> > Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> > --- > drivers/mmc/core/mmc.c | 15 +++++++++++++++ > include/linux/mmc/card.h | 7 +++++++ > include/linux/mmc/mmc.h | 6 ++++++ > 3 files changed, 28 insertions(+) > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c > index 1ab5f3a..0ef3af5 100644 > --- a/drivers/mmc/core/mmc.c > +++ b/drivers/mmc/core/mmc.c > @@ -571,6 +571,21 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) > card->ext_csd.data_sector_size = 512; > } > > + if (card->ext_csd.rev >= 7) { > + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; > + if (card->ext_csd.cmdq_support) > + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; > + } > + > + if (card->ext_csd.rev >= 7) { > + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; > + if (card->ext_csd.cmdq_support) > + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; > + } else { > + card->ext_csd.cmdq_support = 0; > + card->ext_csd.cmdq_depth = 0; > + } > + > out: > return err; > } > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h > index b730272..b87a27c 100644 > --- a/include/linux/mmc/card.h > +++ b/include/linux/mmc/card.h > @@ -112,6 +112,9 @@ struct mmc_ext_csd { > u8 raw_pwr_cl_ddr_52_360; /* 239 */ > u8 raw_bkops_status; /* 246 */ > u8 raw_sectors[4]; /* 212 - 4 bytes */ > + u8 cmdq_mode_en; /* 15 */ Besides the comments from Konstantin, I also wonder about the above variable. I don't see it used anywhere in this patch. Kind regards Uffe > + u8 cmdq_depth; /* 307 */ > + u8 cmdq_support; /* 308 */ > > unsigned int feature_support; > #define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */ > @@ -259,6 +262,7 @@ struct mmc_card { > #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ > #define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */ > #define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */ > +#define MMC_STATE_CMDQ (1<<12) /* card is in cmd queue mode */ > unsigned int quirks; /* card quirks */ > #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ > #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ > @@ -427,6 +431,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) > #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) > #define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) > #define mmc_card_suspended(c) ((c)->state & MMC_STATE_SUSPENDED) > +#define mmc_card_cmdq(c) ((c)->state & MMC_STATE_CMDQ) > > #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) > #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) > @@ -441,6 +446,8 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) > #define mmc_card_clr_doing_bkops(c) ((c)->state &= ~MMC_STATE_DOING_BKOPS) > #define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED) > #define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED) > +#define mmc_card_set_cmdq(c) ((c)->state |= MMC_STATE_CMDQ) > +#define mmc_card_clr_cmdq(c) ((c)->state &= ~MMC_STATE_CMDQ) > > /* > * Quirk add/remove for MMC products. > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h > index 50bcde3..a893c84 100644 > --- a/include/linux/mmc/mmc.h > +++ b/include/linux/mmc/mmc.h > @@ -84,6 +84,9 @@ > #define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ > #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ > > +/* MMC 5.1 - class 11: Command Queueing */ > +#define MMC_CMDQ_TASK_MGMT 48 /* ac [31:0] task ID R1b */ > + > static inline bool mmc_op_multi(u32 opcode) > { > return opcode == MMC_WRITE_MULTIPLE_BLOCK || > @@ -272,6 +275,7 @@ struct _mmc_csd { > * EXT_CSD fields > */ > > +#define EXT_CSD_CMDQ_MODE 15 /* R/W */ > #define EXT_CSD_FLUSH_CACHE 32 /* W */ > #define EXT_CSD_CACHE_CTRL 33 /* R/W */ > #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ > @@ -325,6 +329,8 @@ struct _mmc_csd { > #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ > #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ > #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ > +#define EXT_CSD_CMDQ_DEPTH 307 /* RO */ > +#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */ > #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ > #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ > #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ > -- > 1.8.2.1 > > The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 1/15/2015 2:40 PM, Ulf Hansson wrote: > On 2 December 2014 at 12:56, Sujit Reddy Thumma <sthumma@codeaurora.org> wrote: >> eMMC cards with EXT_CSD version >= 7, optionally support command >> queuing feature as defined by Jedec eMMC5.1. Add support for probing >> command queue feature for such type of cards. >> >> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> >> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> >> --- >> drivers/mmc/core/mmc.c | 15 +++++++++++++++ >> include/linux/mmc/card.h | 7 +++++++ >> include/linux/mmc/mmc.h | 6 ++++++ >> 3 files changed, 28 insertions(+) >> >> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c >> index 1ab5f3a..0ef3af5 100644 >> --- a/drivers/mmc/core/mmc.c >> +++ b/drivers/mmc/core/mmc.c >> @@ -571,6 +571,21 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) >> card->ext_csd.data_sector_size = 512; >> } >> >> + if (card->ext_csd.rev >= 7) { >> + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; >> + if (card->ext_csd.cmdq_support) >> + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; >> + } >> + >> + if (card->ext_csd.rev >= 7) { >> + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; >> + if (card->ext_csd.cmdq_support) >> + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; >> + } else { >> + card->ext_csd.cmdq_support = 0; >> + card->ext_csd.cmdq_depth = 0; >> + } >> + >> out: >> return err; >> } >> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h >> index b730272..b87a27c 100644 >> --- a/include/linux/mmc/card.h >> +++ b/include/linux/mmc/card.h >> @@ -112,6 +112,9 @@ struct mmc_ext_csd { >> u8 raw_pwr_cl_ddr_52_360; /* 239 */ >> u8 raw_bkops_status; /* 246 */ >> u8 raw_sectors[4]; /* 212 - 4 bytes */ >> + u8 cmdq_mode_en; /* 15 */ > > Besides the comments from Konstantin, I also wonder about the above > variable. I don't see it used anywhere in this patch. Thanks. I'll re-check and remove it. > > Kind regards > Uffe > >> + u8 cmdq_depth; /* 307 */ >> + u8 cmdq_support; /* 308 */ >> >> unsigned int feature_support; >> #define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */ >> @@ -259,6 +262,7 @@ struct mmc_card { >> #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ >> #define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */ >> #define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */ >> +#define MMC_STATE_CMDQ (1<<12) /* card is in cmd queue mode */ >> unsigned int quirks; /* card quirks */ >> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ >> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ >> @@ -427,6 +431,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) >> #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) >> #define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) >> #define mmc_card_suspended(c) ((c)->state & MMC_STATE_SUSPENDED) >> +#define mmc_card_cmdq(c) ((c)->state & MMC_STATE_CMDQ) >> >> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) >> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) >> @@ -441,6 +446,8 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) >> #define mmc_card_clr_doing_bkops(c) ((c)->state &= ~MMC_STATE_DOING_BKOPS) >> #define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED) >> #define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED) >> +#define mmc_card_set_cmdq(c) ((c)->state |= MMC_STATE_CMDQ) >> +#define mmc_card_clr_cmdq(c) ((c)->state &= ~MMC_STATE_CMDQ) >> >> /* >> * Quirk add/remove for MMC products. >> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h >> index 50bcde3..a893c84 100644 >> --- a/include/linux/mmc/mmc.h >> +++ b/include/linux/mmc/mmc.h >> @@ -84,6 +84,9 @@ >> #define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ >> #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ >> >> +/* MMC 5.1 - class 11: Command Queueing */ >> +#define MMC_CMDQ_TASK_MGMT 48 /* ac [31:0] task ID R1b */ >> + >> static inline bool mmc_op_multi(u32 opcode) >> { >> return opcode == MMC_WRITE_MULTIPLE_BLOCK || >> @@ -272,6 +275,7 @@ struct _mmc_csd { >> * EXT_CSD fields >> */ >> >> +#define EXT_CSD_CMDQ_MODE 15 /* R/W */ >> #define EXT_CSD_FLUSH_CACHE 32 /* W */ >> #define EXT_CSD_CACHE_CTRL 33 /* R/W */ >> #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ >> @@ -325,6 +329,8 @@ struct _mmc_csd { >> #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ >> #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ >> #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ >> +#define EXT_CSD_CMDQ_DEPTH 307 /* RO */ >> +#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */ >> #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ >> #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ >> #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ >> -- >> 1.8.2.1 >> >> The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, >> a Linux Foundation Collaborative Project >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 1ab5f3a..0ef3af5 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -571,6 +571,21 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.data_sector_size = 512; } + if (card->ext_csd.rev >= 7) { + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; + if (card->ext_csd.cmdq_support) + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; + } + + if (card->ext_csd.rev >= 7) { + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT]; + if (card->ext_csd.cmdq_support) + card->ext_csd.cmdq_depth = ext_csd[EXT_CSD_CMDQ_DEPTH]; + } else { + card->ext_csd.cmdq_support = 0; + card->ext_csd.cmdq_depth = 0; + } + out: return err; } diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index b730272..b87a27c 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -112,6 +112,9 @@ struct mmc_ext_csd { u8 raw_pwr_cl_ddr_52_360; /* 239 */ u8 raw_bkops_status; /* 246 */ u8 raw_sectors[4]; /* 212 - 4 bytes */ + u8 cmdq_mode_en; /* 15 */ + u8 cmdq_depth; /* 307 */ + u8 cmdq_support; /* 308 */ unsigned int feature_support; #define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */ @@ -259,6 +262,7 @@ struct mmc_card { #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ #define MMC_STATE_DOING_BKOPS (1<<10) /* card is doing BKOPS */ #define MMC_STATE_SUSPENDED (1<<11) /* card is suspended */ +#define MMC_STATE_CMDQ (1<<12) /* card is in cmd queue mode */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -427,6 +431,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) #define mmc_card_doing_bkops(c) ((c)->state & MMC_STATE_DOING_BKOPS) #define mmc_card_suspended(c) ((c)->state & MMC_STATE_SUSPENDED) +#define mmc_card_cmdq(c) ((c)->state & MMC_STATE_CMDQ) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) @@ -441,6 +446,8 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_clr_doing_bkops(c) ((c)->state &= ~MMC_STATE_DOING_BKOPS) #define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED) #define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED) +#define mmc_card_set_cmdq(c) ((c)->state |= MMC_STATE_CMDQ) +#define mmc_card_clr_cmdq(c) ((c)->state &= ~MMC_STATE_CMDQ) /* * Quirk add/remove for MMC products. diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 50bcde3..a893c84 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -84,6 +84,9 @@ #define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ +/* MMC 5.1 - class 11: Command Queueing */ +#define MMC_CMDQ_TASK_MGMT 48 /* ac [31:0] task ID R1b */ + static inline bool mmc_op_multi(u32 opcode) { return opcode == MMC_WRITE_MULTIPLE_BLOCK || @@ -272,6 +275,7 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_CMDQ_MODE 15 /* R/W */ #define EXT_CSD_FLUSH_CACHE 32 /* W */ #define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ @@ -325,6 +329,8 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_CMDQ_DEPTH 307 /* RO */ +#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */ #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */