@@ -505,6 +505,23 @@ static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
return IRQ_HANDLED;
}
+void sdhci_msm_reset(struct sdhci_host *host, u8 mask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+
+ if (mask & SDHCI_RESET_ALL) {
+ u32 val = readl_relaxed(msm_host->core_mem + CORE_POWER);
+
+ val |= CORE_SW_RST;
+ writel_relaxed(val, msm_host->core_mem + CORE_POWER);
+
+ sdhci_msm_voltage_switch(host);
+ }
+
+ sdhci_reset(host, mask);
+}
+
static const struct of_device_id sdhci_msm_dt_match[] = {
{ .compatible = "qcom,sdhci-msm-v4" },
{},
@@ -514,7 +531,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
static const struct sdhci_ops sdhci_msm_ops = {
.platform_execute_tuning = sdhci_msm_execute_tuning,
- .reset = sdhci_reset,
+ .reset = sdhci_msm_reset,
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.set_uhs_signaling = sdhci_msm_set_uhs_signaling,
On apq8016, apq8084 and apq8074 platforms, when we want to do a software reset, we need to poke some additional vendor specific registers. If we don't do so, the following error message appears: mmc0: Reset 0x1 never completed. sdhci: =========== REGISTER DUMP (mmc0)=========== sdhci: Sys addr: 0x00000000 | Version: 0x00002e02 sdhci: Blk size: 0x00004000 | Blk cnt: 0x00000000 sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci: Present: 0x01f80000 | Host ctl: 0x00000000 sdhci: Power: 0x00000000 | Blk gap: 0x00000000 sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci: Caps: 0x322dc8b2 | Caps_1: 0x00008007 sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 sdhci: Host ctl2: 0x00000000 sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 sdhci: =========================================== Fix it by implementing the custom sdhci_reset() function, which does what is needed. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- drivers/mmc/host/sdhci-msm.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html