| Message ID | 20170411102056.2869-3-jszhang@marvell.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 11/04/17 13:20, Jisheng Zhang wrote: > We found one issue on BG4CT platforms with GPIO for sdcar card detect > interrupt: remove sdcard when there's read write access to the sdcard, > sometimes the card remove event can't be handled for a long time, so > the system still think the sdcard is still plugged in. It turns out > that the sdhci_card_event() is missing in common slot gpio's card > detect isr. ->card_event() is called by mmc_rescan(). Why is that too late? > > We fix this issue by providing sdhci's own isr for card-detect > interrupts. In this own isr, we call sdhci_card_event() then process > the change of state. Why doesn't every other host controller have this problem? > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > --- > drivers/mmc/host/sdhci.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 63bc33a54d0d..b6c5021a5892 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -2777,6 +2777,16 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) > return result; > } > > +static irqreturn_t sdhci_cd_irq(int irq, void *dev_id) > +{ > + struct mmc_host *mmc = dev_id; > + struct sdhci_host *host = mmc_priv(mmc); > + > + mmc->ops->card_event(mmc); > + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); > + return IRQ_HANDLED; > +} > + > static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) > { > struct sdhci_host *host = dev_id; > @@ -3617,6 +3627,8 @@ int __sdhci_add_host(struct sdhci_host *host) > > sdhci_init(host, 0); > > + mmc_gpio_set_cd_isr(mmc, sdhci_cd_irq); > + > ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq, > IRQF_SHARED, mmc_hostname(mmc), host); > if (ret) { > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 11 Apr 2017 13:31:16 +0300 Adrian Hunter wrote: > On 11/04/17 13:20, Jisheng Zhang wrote: > > We found one issue on BG4CT platforms with GPIO for sdcar card detect > > interrupt: remove sdcard when there's read write access to the sdcard, > > sometimes the card remove event can't be handled for a long time, so > > the system still think the sdcard is still plugged in. It turns out > > that the sdhci_card_event() is missing in common slot gpio's card > > detect isr. > > ->card_event() is called by mmc_rescan(). Why is that too late? Indeed, maybe the "too late" here is not accurate. Compared with host's CD interrupt handling, the GPIO CD interrupt handling differs in when to call sdhci_card_event(): in previous case, it's called in ISR, in later it's in workqueue. Now, I agree it's not necessary to put into ISR. So let's ignore the two patches. Thanks for your review, Jisheng -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 63bc33a54d0d..b6c5021a5892 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2777,6 +2777,16 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) return result; } +static irqreturn_t sdhci_cd_irq(int irq, void *dev_id) +{ + struct mmc_host *mmc = dev_id; + struct sdhci_host *host = mmc_priv(mmc); + + mmc->ops->card_event(mmc); + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + return IRQ_HANDLED; +} + static irqreturn_t sdhci_thread_irq(int irq, void *dev_id) { struct sdhci_host *host = dev_id; @@ -3617,6 +3627,8 @@ int __sdhci_add_host(struct sdhci_host *host) sdhci_init(host, 0); + mmc_gpio_set_cd_isr(mmc, sdhci_cd_irq); + ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq, IRQF_SHARED, mmc_hostname(mmc), host); if (ret) {
We found one issue on BG4CT platforms with GPIO for sdcar card detect interrupt: remove sdcard when there's read write access to the sdcard, sometimes the card remove event can't be handled for a long time, so the system still think the sdcard is still plugged in. It turns out that the sdhci_card_event() is missing in common slot gpio's card detect isr. We fix this issue by providing sdhci's own isr for card-detect interrupts. In this own isr, we call sdhci_card_event() then process the change of state. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- drivers/mmc/host/sdhci.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)