diff mbox series

[v3,22/38] mmc: tegra: Configure default trim value on reset

Message ID 20180830150639.21048-23-avienamo@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Tegra SDHCI add support for HS200 and UHS signaling | expand

Commit Message

Aapo Vienamo Aug. 30, 2018, 3:06 p.m. UTC 
Program the outbound sampling trim value in tegra_sdhci_reset(). Unlike
the outbound tap value this does not depend on the signaling mode and
needs to be only programmed once.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
 drivers/mmc/host/sdhci-tegra.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 3fd54af05671..704c82cf7adf 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -37,6 +37,8 @@ 
 #define SDHCI_TEGRA_VENDOR_CLOCK_CTRL			0x100
 #define SDHCI_CLOCK_CTRL_TAP_MASK			0x00ff0000
 #define SDHCI_CLOCK_CTRL_TAP_SHIFT			16
+#define SDHCI_CLOCK_CTRL_TRIM_MASK			0x1f000000
+#define SDHCI_CLOCK_CTRL_TRIM_SHIFT			24
 #define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE		BIT(5)
 #define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE		BIT(3)
 #define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE	BIT(2)
@@ -287,7 +289,8 @@  static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
 		       SDHCI_MISC_CTRL_ENABLE_DDR50 |
 		       SDHCI_MISC_CTRL_ENABLE_SDR104);
 
-	clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE;
+	clk_ctrl &= ~(SDHCI_CLOCK_CTRL_TRIM_MASK |
+		      SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE);
 
 	if (tegra_sdhci_is_pad_and_regulator_valid(host)) {
 		/* Erratum: Enable SDHCI spec v3.00 support */
@@ -304,6 +307,8 @@  static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
 			clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
 	}
 
+	clk_ctrl |= tegra_host->default_trim << SDHCI_CLOCK_CTRL_TRIM_SHIFT;
+
 	sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
 	sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);