| Message ID | 20180924080233.4045-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: sdhci: sirf: Use the slot GPIO descriptor | expand |
On 24 September 2018 at 10:02, Linus Walleij <linus.walleij@linaro.org> wrote: > This driver is complicating things for no reason: the "cd" > GPIO can easily be retrieved from the device tree if present > using just mmc_gpiod_request_cd(), which will fetch the > descriptor from the device tree using the standard binding > just fine. > > If the retrieveal is successful, we also request the IRQ. > > As a result the private subdriver data can be removed > entirely. > > Cc: Weijun Yang <york.yang@csr.com> > Cc: Barry Song <baohua@kernel.org> > Cc: Adrian Hunter <adrian.hunter@intel.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Applied for next, thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci-sirf.c | 28 +++++----------------------- > 1 file changed, 5 insertions(+), 23 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c > index 391d52b467ca..5eada6f87e60 100644 > --- a/drivers/mmc/host/sdhci-sirf.c > +++ b/drivers/mmc/host/sdhci-sirf.c > @@ -11,7 +11,6 @@ > #include <linux/mmc/host.h> > #include <linux/module.h> > #include <linux/of.h> > -#include <linux/of_gpio.h> > #include <linux/mmc/slot-gpio.h> > #include "sdhci-pltfm.h" > > @@ -19,10 +18,6 @@ > #define SDHCI_SIRF_8BITBUS BIT(3) > #define SIRF_TUNING_COUNT 16384 > > -struct sdhci_sirf_priv { > - int gpio_cd; > -}; > - > static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width) > { > u8 ctrl; > @@ -170,9 +165,7 @@ static int sdhci_sirf_probe(struct platform_device *pdev) > { > struct sdhci_host *host; > struct sdhci_pltfm_host *pltfm_host; > - struct sdhci_sirf_priv *priv; > struct clk *clk; > - int gpio_cd; > int ret; > > clk = devm_clk_get(&pdev->dev, NULL); > @@ -181,19 +174,12 @@ static int sdhci_sirf_probe(struct platform_device *pdev) > return PTR_ERR(clk); > } > > - if (pdev->dev.of_node) > - gpio_cd = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0); > - else > - gpio_cd = -EINVAL; > - > - host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, sizeof(struct sdhci_sirf_priv)); > + host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, 0); > if (IS_ERR(host)) > return PTR_ERR(host); > > pltfm_host = sdhci_priv(host); > pltfm_host->clk = clk; > - priv = sdhci_pltfm_priv(pltfm_host); > - priv->gpio_cd = gpio_cd; > > sdhci_get_of_property(pdev); > > @@ -209,15 +195,11 @@ static int sdhci_sirf_probe(struct platform_device *pdev) > * We must request the IRQ after sdhci_add_host(), as the tasklet only > * gets setup in sdhci_add_host() and we oops. > */ > - if (gpio_is_valid(priv->gpio_cd)) { > - ret = mmc_gpio_request_cd(host->mmc, priv->gpio_cd, 0); > - if (ret) { > - dev_err(&pdev->dev, "card detect irq request failed: %d\n", > - ret); > - goto err_request_cd; > - } > + ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); > + if (ret == -EPROBE_DEFER) > + goto err_request_cd; > + if (!ret) > mmc_gpiod_request_cd_irq(host->mmc); > - } > > return 0; > > -- > 2.17.1 >
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c index 391d52b467ca..5eada6f87e60 100644 --- a/drivers/mmc/host/sdhci-sirf.c +++ b/drivers/mmc/host/sdhci-sirf.c @@ -11,7 +11,6 @@ #include <linux/mmc/host.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/mmc/slot-gpio.h> #include "sdhci-pltfm.h" @@ -19,10 +18,6 @@ #define SDHCI_SIRF_8BITBUS BIT(3) #define SIRF_TUNING_COUNT 16384 -struct sdhci_sirf_priv { - int gpio_cd; -}; - static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width) { u8 ctrl; @@ -170,9 +165,7 @@ static int sdhci_sirf_probe(struct platform_device *pdev) { struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; - struct sdhci_sirf_priv *priv; struct clk *clk; - int gpio_cd; int ret; clk = devm_clk_get(&pdev->dev, NULL); @@ -181,19 +174,12 @@ static int sdhci_sirf_probe(struct platform_device *pdev) return PTR_ERR(clk); } - if (pdev->dev.of_node) - gpio_cd = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0); - else - gpio_cd = -EINVAL; - - host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, sizeof(struct sdhci_sirf_priv)); + host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, 0); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); pltfm_host->clk = clk; - priv = sdhci_pltfm_priv(pltfm_host); - priv->gpio_cd = gpio_cd; sdhci_get_of_property(pdev); @@ -209,15 +195,11 @@ static int sdhci_sirf_probe(struct platform_device *pdev) * We must request the IRQ after sdhci_add_host(), as the tasklet only * gets setup in sdhci_add_host() and we oops. */ - if (gpio_is_valid(priv->gpio_cd)) { - ret = mmc_gpio_request_cd(host->mmc, priv->gpio_cd, 0); - if (ret) { - dev_err(&pdev->dev, "card detect irq request failed: %d\n", - ret); - goto err_request_cd; - } + ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + if (ret == -EPROBE_DEFER) + goto err_request_cd; + if (!ret) mmc_gpiod_request_cd_irq(host->mmc); - } return 0;
This driver is complicating things for no reason: the "cd" GPIO can easily be retrieved from the device tree if present using just mmc_gpiod_request_cd(), which will fetch the descriptor from the device tree using the standard binding just fine. If the retrieveal is successful, we also request the IRQ. As a result the private subdriver data can be removed entirely. Cc: Weijun Yang <york.yang@csr.com> Cc: Barry Song <baohua@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/mmc/host/sdhci-sirf.c | 28 +++++----------------------- 1 file changed, 5 insertions(+), 23 deletions(-)