@@ -1257,16 +1257,6 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
}
#endif
-static const struct sdhci_pci_fixes sdhci_o2 = {
- .probe = sdhci_pci_o2_probe,
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
- .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
- .probe_slot = sdhci_pci_o2_probe_slot,
-#ifdef CONFIG_PM_SLEEP
- .resume = sdhci_pci_o2_resume,
-#endif
-};
-
static const struct sdhci_pci_fixes sdhci_jmicron = {
.probe = jmicron_probe,
@@ -60,6 +60,16 @@
#define O2_SD_VENDOR_SETTING2 0x1C8
#define O2_SD_HW_TUNING_DISABLE BIT(4)
+const struct sdhci_pci_fixes sdhci_o2 = {
+ .probe = sdhci_pci_o2_probe,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
+ .probe_slot = sdhci_pci_o2_probe_slot,
+#ifdef CONFIG_PM_SLEEP
+ .resume = sdhci_pci_o2_resume,
+#endif
+};
+
static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
{
u16 reg;
@@ -179,13 +179,9 @@ static inline void *sdhci_pci_priv(struct sdhci_pci_slot *slot)
int sdhci_pci_resume_host(struct sdhci_pci_chip *chip);
#endif
int sdhci_pci_enable_dma(struct sdhci_host *host);
-int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
-int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
-#ifdef CONFIG_PM_SLEEP
-int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
-#endif
extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps;
+extern const struct sdhci_pci_fixes sdhci_o2;
#endif /* __SDHCI_PCI_H */
Moving sdhci_o2 into sdhci-pci-o2micro.c Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com> --- Change in V3: 1. Change the patches order to make this the first patch 2. Remove the other unneeded o2 declarations in sdhci-pci.h Change in V2: 1. Moving sdhci_o2 into sdhci-pci-o2micro.c Change in V1: N/A --- drivers/mmc/host/sdhci-pci-core.c | 10 ---------- drivers/mmc/host/sdhci-pci-o2micro.c | 10 ++++++++++ drivers/mmc/host/sdhci-pci.h | 6 +----- 3 files changed, 11 insertions(+), 15 deletions(-)