diff mbox series

[v4,5/6] mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data

Message ID 20190308032707.5745-5-yinbo.zhu@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v4,1/6] mmc: sdhci-of-esdhc: add erratum eSDHC5 support | expand

Commit Message

Yinbo Zhu March 8, 2019, 3:26 a.m. UTC 
From: Yangbo Lu <yangbo.lu@nxp.com>

For some controllers, in Present State Register, Data Line
Active bit is not reliable for commands (such as CMD6, CMD7,
CMD12, CMD28, CMD29, or CMD38) with busy signal. DLA affects
Command with Data Inhibit bit. Therefore, software driver
may not know the busy status in DLA/CDIHB.

Futunately MMC core driver has already polled card status
with CMD13 after sending any command with busy signal. So
we can just ignore CDIHB never released issue for such
controllers. This patch is to add a quirk to handle this.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
Change in v4:
		update the commit information that replace sdhci 
		with sdhci-of-esdhc

 drivers/mmc/host/sdhci-of-esdhc.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index ef36f464fa2d..da7d53861171 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -82,6 +82,7 @@  struct sdhci_esdhc {
 	bool quirk_limited_clk_division;
 	bool quirk_unreliable_pulse_detection;
 	bool quirk_fixup_tuning;
+	bool quirk_ignore_data_inhibit;
 	unsigned int peripheral_clock;
 	const struct esdhc_clk_fixup *clk_fixup;
 	u32 div_ratio;
@@ -148,6 +149,19 @@  static u32 esdhc_readl_fixup(struct sdhci_host *host,
 		return ret;
 	}
 
+	/*
+	 * Some controllers have unreliable Data Line Active
+	 * bit for commands with busy signal. This affects
+	 * Command Inhibit (data) bit. Just ignore it since
+	 * MMC core driver has already polled card status
+	 * with CMD13 after any command with busy siganl.
+	 */
+	if ((spec_reg == SDHCI_PRESENT_STATE) &&
+	(esdhc->quirk_ignore_data_inhibit == true)) {
+		ret = value & ~SDHCI_DATA_INHIBIT;
+		return ret;
+	}
+
 	ret = value;
 	return ret;
 }
@@ -1111,12 +1125,14 @@  static int sdhci_esdhc_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
+	esdhc->quirk_ignore_data_inhibit = false;
 	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
 		/*
 		 * Freescale messed up with P2020 as it has a non-standard
 		 * host control register
 		 */
 		host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
+		esdhc->quirk_ignore_data_inhibit = true;
 	}
 
 	/* call to generic mmc_of_parse to support additional capabilities */