| Message ID | 20190805102641.3732-1-yinbo.zhu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4] arm64: dts: ls1028a: Add esdhc node in dts | expand |
On Mon, Aug 05, 2019 at 06:26:41PM +0800, Yinbo Zhu wrote: > From: Ashish Kumar <Ashish.Kumar@nxp.com> > > This patch is to add esdhc node and enable SD UHS-I, > eMMC HS200 for ls1028ardb/ls1028aqds board. > > Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> > Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> > --- > Change in v4: > put esdhc 'status' at end of property list. > sort the nodes in unit-address > Use IRQ_TYPE_LEVEL_HIGH represent 0x4 in "interrupts = <0 28 0x4>" > > arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 +++++++ > arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 27 +++++++++++++++++++++++ > 3 files changed, 48 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts > index de6ef39..5e14e5a 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts > @@ -95,6 +95,14 @@ > status = "okay"; > }; > > +&esdhc { > + status = "okay"; > +}; > + > +&esdhc1 { > + status = "okay"; > +}; > + > &i2c0 { > status = "okay"; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts > index 9fb9113..12c9cd3 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts > @@ -83,6 +83,19 @@ > }; > }; > > +&esdhc { > + sd-uhs-sdr104; > + sd-uhs-sdr50; > + sd-uhs-sdr25; > + sd-uhs-sdr12; > + status = "okay"; > + }; Fix indent. > + > +&esdhc1 { > + mmc-hs200-1_8v; > + status = "okay"; > + }; Ditto Shawn > + > &i2c0 { > status = "okay"; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > index 7975519..f299075 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > @@ -245,6 +245,33 @@ > status = "disabled"; > }; > > + esdhc: mmc@2140000 { > + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; > + reg = <0x0 0x2140000 0x0 0x10000>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <0>; /* fixed up by bootloader */ > + clocks = <&clockgen 2 1>; > + voltage-ranges = <1800 1800 3300 3300>; > + sdhci,auto-cmd12; > + little-endian; > + bus-width = <4>; > + status = "disabled"; > + }; > + > + esdhc1: mmc@2150000 { > + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; > + reg = <0x0 0x2150000 0x0 0x10000>; > + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <0>; /* fixed up by bootloader */ > + clocks = <&clockgen 2 1>; > + voltage-ranges = <1800 1800 3300 3300>; > + sdhci,auto-cmd12; > + broken-cd; > + little-endian; > + bus-width = <4>; > + status = "disabled"; > + }; > + > duart0: serial@21c0500 { > compatible = "fsl,ns16550", "ns16550a"; > reg = <0x00 0x21c0500 0x0 0x100>; > -- > 2.9.5 >
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index de6ef39..5e14e5a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -95,6 +95,14 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9fb9113..12c9cd3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -83,6 +83,19 @@ }; }; +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; + }; + +&esdhc1 { + mmc-hs200-1_8v; + status = "okay"; + }; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7975519..f299075 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -245,6 +245,33 @@ status = "disabled"; }; + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>;