From patchwork Thu Sep 12 20:09:07 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ludovic Desroches X-Patchwork-Id: 11143741 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6266F16B1 for ; Thu, 12 Sep 2019 20:09:39 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 37BA920830 for ; Thu, 12 Sep 2019 20:09:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727926AbfILUJb (ORCPT ); Thu, 12 Sep 2019 16:09:31 -0400 Received: from esa2.microchip.iphmx.com ([68.232.149.84]:49202 "EHLO esa2.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726329AbfILUJa (ORCPT ); Thu, 12 Sep 2019 16:09:30 -0400 Received-SPF: Pass (esa2.microchip.iphmx.com: domain of Ludovic.Desroches@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa2.microchip.iphmx.com; envelope-from="Ludovic.Desroches@microchip.com"; x-sender="Ludovic.Desroches@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com a:mx1.microchip.iphmx.com a:mx2.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa2.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa2.microchip.iphmx.com; envelope-from="Ludovic.Desroches@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa2.microchip.iphmx.com; dkim=none (message not signed) header.i=none; spf=Pass smtp.mailfrom=Ludovic.Desroches@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: 4QUrPvNc4yVD7OWx+/8yC/zHOZ6MRgqeaAqyZpn6VVxjP0B7quEqO1XydtGWHUCVlHUhq22pLh TIC74duAi5fsQ+89YMK96eh0LxRxsnALjBjw/Cv4H8eaHJBRDpkGeX8jHdE0oynJq0SJs19ECF s5CSudh8uevA4AL7jk2FvBxZXpO6mYW2N53zwFOFR8seeUpk9ZkRHYirrBUUlQk8V8Slgn6uiE 3eJ10LfPsnmsnotJTBB1ggtvqESAoMQ2pXBDSKkedIEsKT+TAVT1mTq8QtBHlMcdp6+V8tosOR 53w= X-IronPort-AV: E=Sophos;i="5.64,498,1559545200"; d="scan'208";a="48745923" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa2.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 12 Sep 2019 13:09:29 -0700 Received: from chn-vm-ex03.mchp-main.com (10.10.85.151) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Thu, 12 Sep 2019 13:09:29 -0700 Received: from sekiro.microchip.com (10.10.85.251) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Thu, 12 Sep 2019 13:09:26 -0700 From: Ludovic Desroches To: , , CC: , , , , , , , Subject: [PATCH 2/3] mmc: sdhci-of-at91: rework clocks management to support SAM9x60 device Date: Thu, 12 Sep 2019 22:09:07 +0200 Message-ID: <20190912200908.31318-2-ludovic.desroches@microchip.com> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20190912200908.31318-1-ludovic.desroches@microchip.com> References: <20190912200908.31318-1-ludovic.desroches@microchip.com> MIME-Version: 1.0 Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org In the SAM9x60 SoC, there are only two clocks instead of three for the SDHCI device. The base clk is no longer provided, it is generated internally from the mult clk. The values of the base clk and mul in the capabilities registers may not reflect the reality as the mult clk is a programmable clock which can take several rates. As we can't trust those values, take them from the clock tree and update the capabilities according to. As we can have the same pitfall, in some cases, with the SAMA5D2 Soc, stop relying on capabilities too. Signed-off-by: Ludovic Desroches --- drivers/mmc/host/sdhci-of-at91.c | 104 +++++++++++++++++-------------- 1 file changed, 57 insertions(+), 47 deletions(-) diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index e7d1920729fb..a9c126f14d85 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -30,7 +30,14 @@ #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ +struct sdhci_at91_soc_data { + const struct sdhci_pltfm_data *pdata; + bool baseclk_is_generated_internally; + unsigned int divider_for_baseclk; +}; + struct sdhci_at91_priv { + const struct sdhci_at91_soc_data *soc_data; struct clk *hclock; struct clk *gck; struct clk *mainck; @@ -130,12 +137,24 @@ static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_power = sdhci_at91_set_power, }; -static const struct sdhci_pltfm_data soc_data_sama5d2 = { +static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = { .ops = &sdhci_at91_sama5d2_ops, }; +static const struct sdhci_at91_soc_data soc_data_sama5d2 = { + .pdata = &sdhci_sama5d2_pdata, + .baseclk_is_generated_internally = false, +}; + +static const struct sdhci_at91_soc_data soc_data_sam9x60 = { + .pdata = &sdhci_sama5d2_pdata, + .baseclk_is_generated_internally = true, + .divider_for_baseclk = 2, +}; + static const struct of_device_id sdhci_at91_dt_match[] = { { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 }, + { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 }, {} }; MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match); @@ -145,50 +164,36 @@ static int sdhci_at91_set_clks_presets(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); - int ret; unsigned int caps0, caps1; unsigned int clk_base, clk_mul; - unsigned int gck_rate, real_gck_rate; + unsigned int gck_rate, clk_base_rate; unsigned int preset_div; - /* - * The mult clock is provided by as a generated clock by the PMC - * controller. In order to set the rate of gck, we have to get the - * base clock rate and the clock mult from capabilities. - */ clk_prepare_enable(priv->hclock); caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); - clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; - clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; - gck_rate = clk_base * 1000000 * (clk_mul + 1); - ret = clk_set_rate(priv->gck, gck_rate); - if (ret < 0) { - dev_err(dev, "failed to set gck"); - clk_disable_unprepare(priv->hclock); - return ret; - } - /* - * We need to check if we have the requested rate for gck because in - * some cases this rate could be not supported. If it happens, the rate - * is the closest one gck can provide. We have to update the value - * of clk mul. - */ - real_gck_rate = clk_get_rate(priv->gck); - if (real_gck_rate != gck_rate) { - clk_mul = real_gck_rate / (clk_base * 1000000) - 1; - caps1 &= (~SDHCI_CLOCK_MUL_MASK); - caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & - SDHCI_CLOCK_MUL_MASK); - /* Set capabilities in r/w mode. */ - writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, - host->ioaddr + SDMMC_CACR); - writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); - /* Set capabilities in ro mode. */ - writel(0, host->ioaddr + SDMMC_CACR); - dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n", - clk_mul, real_gck_rate); - } + + gck_rate = clk_get_rate(priv->gck); + if (priv->soc_data->baseclk_is_generated_internally) + clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk; + else + clk_base_rate = clk_get_rate(priv->mainck); + + clk_base = clk_base_rate / 1000000; + clk_mul = gck_rate / clk_base_rate - 1; + + caps0 &= (~SDHCI_CLOCK_V3_BASE_MASK); + caps0 |= ((clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK); + caps1 &= (~SDHCI_CLOCK_MUL_MASK); + caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK); + /* Set capabilities in r/w mode. */ + writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); + writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); + /* Set capabilities in ro mode. */ + writel(0, host->ioaddr + SDMMC_CACR); + + dev_info(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n", + clk_mul, gck_rate, clk_base_rate); /* * We have to set preset values because it depends on the clk_mul @@ -196,19 +201,19 @@ static int sdhci_at91_set_clks_presets(struct device *dev) * maximum sd clock value is 120 MHz instead of 208 MHz. For that * reason, we need to use presets to support SDR104. */ - preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR12); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR25); - preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR50); - preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR104); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_DDR50); @@ -303,7 +308,7 @@ static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { static int sdhci_at91_probe(struct platform_device *pdev) { const struct of_device_id *match; - const struct sdhci_pltfm_data *soc_data; + const struct sdhci_at91_soc_data *soc_data; struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_at91_priv *priv; @@ -314,17 +319,22 @@ static int sdhci_at91_probe(struct platform_device *pdev) return -EINVAL; soc_data = match->data; - host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv)); + host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); priv = sdhci_pltfm_priv(pltfm_host); + priv->soc_data = soc_data; priv->mainck = devm_clk_get(&pdev->dev, "baseclk"); if (IS_ERR(priv->mainck)) { - dev_err(&pdev->dev, "failed to get baseclk\n"); - return PTR_ERR(priv->mainck); + if (soc_data->baseclk_is_generated_internally) { + priv->mainck = NULL; + } else { + dev_err(&pdev->dev, "failed to get baseclk\n"); + return PTR_ERR(priv->mainck); + } } priv->hclock = devm_clk_get(&pdev->dev, "hclock");