Message ID | 20191018131338.11713-1-hslester96@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | mmc: renesas_sdhi: add checks for pinctrl_lookup_state | expand |
On Fri, 18 Oct 2019 at 15:13, Chuhong Yuan <hslester96@gmail.com> wrote: > > renesas_sdhi_probe misses checks for pinctrl_lookup_state and may miss > failures. > Add checks for them to fix the problem. > > Signed-off-by: Chuhong Yuan <hslester96@gmail.com> > --- > drivers/mmc/host/renesas_sdhi_core.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c > index d4ada5cca2d1..dc5ad6632df3 100644 > --- a/drivers/mmc/host/renesas_sdhi_core.c > +++ b/drivers/mmc/host/renesas_sdhi_core.c > @@ -694,8 +694,13 @@ int renesas_sdhi_probe(struct platform_device *pdev, > if (!IS_ERR(priv->pinctrl)) { > priv->pins_default = pinctrl_lookup_state(priv->pinctrl, > PINCTRL_STATE_DEFAULT); > + if (IS_ERR(priv->pins_default)) > + return PTR_ERR(priv->pins_default); > + > priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, > "state_uhs"); > + if (IS_ERR(priv->pins_uhs)) > + return PTR_ERR(priv->pins_uhs); > } This looks correct to me, as I guess if there is a pinctrl specified for device node of the controller, it means that it should be used!? I understand that this is only used for those variants that supports UHS-I via the renesas_sdhi_start_signal_voltage_switch(). Wolfram, is this fine you think? > > host = tmio_mmc_host_alloc(pdev, mmc_data); > -- > 2.20.1 > Kind regards Uffe
> I understand that this is only used for those variants that supports > UHS-I via the renesas_sdhi_start_signal_voltage_switch(). Wolfram, is > this fine you think? I'll double check tomorrow.
On Mon, Oct 21, 2019 at 04:32:49PM +0200, Ulf Hansson wrote: > On Fri, 18 Oct 2019 at 15:13, Chuhong Yuan <hslester96@gmail.com> wrote: > > > > renesas_sdhi_probe misses checks for pinctrl_lookup_state and may miss > > failures. > > Add checks for them to fix the problem. > > > > Signed-off-by: Chuhong Yuan <hslester96@gmail.com> > > --- > > drivers/mmc/host/renesas_sdhi_core.c | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c > > index d4ada5cca2d1..dc5ad6632df3 100644 > > --- a/drivers/mmc/host/renesas_sdhi_core.c > > +++ b/drivers/mmc/host/renesas_sdhi_core.c > > @@ -694,8 +694,13 @@ int renesas_sdhi_probe(struct platform_device *pdev, > > if (!IS_ERR(priv->pinctrl)) { > > priv->pins_default = pinctrl_lookup_state(priv->pinctrl, > > PINCTRL_STATE_DEFAULT); > > + if (IS_ERR(priv->pins_default)) > > + return PTR_ERR(priv->pins_default); > > + > > priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, > > "state_uhs"); > > + if (IS_ERR(priv->pins_uhs)) > > + return PTR_ERR(priv->pins_uhs); > > } > > This looks correct to me, as I guess if there is a pinctrl specified > for device node of the controller, it means that it should be used!? > > I understand that this is only used for those variants that supports > UHS-I via the renesas_sdhi_start_signal_voltage_switch(). Wolfram, is > this fine you think? Well, I don't like to bail out because this error is not fatal for basic operations. How about releasing priv->pinctrl again with an additional warning that pinctrl settings are broken and will prevent 1.8v modes? Opinions?
On Wed, 23 Oct 2019 at 17:33, Wolfram Sang <wsa@the-dreams.de> wrote: > > On Mon, Oct 21, 2019 at 04:32:49PM +0200, Ulf Hansson wrote: > > On Fri, 18 Oct 2019 at 15:13, Chuhong Yuan <hslester96@gmail.com> wrote: > > > > > > renesas_sdhi_probe misses checks for pinctrl_lookup_state and may miss > > > failures. > > > Add checks for them to fix the problem. > > > > > > Signed-off-by: Chuhong Yuan <hslester96@gmail.com> > > > --- > > > drivers/mmc/host/renesas_sdhi_core.c | 5 +++++ > > > 1 file changed, 5 insertions(+) > > > > > > diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c > > > index d4ada5cca2d1..dc5ad6632df3 100644 > > > --- a/drivers/mmc/host/renesas_sdhi_core.c > > > +++ b/drivers/mmc/host/renesas_sdhi_core.c > > > @@ -694,8 +694,13 @@ int renesas_sdhi_probe(struct platform_device *pdev, > > > if (!IS_ERR(priv->pinctrl)) { > > > priv->pins_default = pinctrl_lookup_state(priv->pinctrl, > > > PINCTRL_STATE_DEFAULT); > > > + if (IS_ERR(priv->pins_default)) > > > + return PTR_ERR(priv->pins_default); > > > + > > > priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, > > > "state_uhs"); > > > + if (IS_ERR(priv->pins_uhs)) > > > + return PTR_ERR(priv->pins_uhs); > > > } > > > > This looks correct to me, as I guess if there is a pinctrl specified > > for device node of the controller, it means that it should be used!? > > > > I understand that this is only used for those variants that supports > > UHS-I via the renesas_sdhi_start_signal_voltage_switch(). Wolfram, is > > this fine you think? > > Well, I don't like to bail out because this error is not fatal for basic > operations. How about releasing priv->pinctrl again with an additional > warning that pinctrl settings are broken and will prevent 1.8v modes? > > Opinions? Hmm, from a mmc driver probe point of view, I don't quite share this approach. I would rather fail as it forces the DTB to be corrected immediately, rather than trusting some developer to look at a warning in a log. The point is, in such a case it may never get fixed, if the product is shipped with the wrong DTB. My concern at this point is rather to break existing DTBs, but it seems that should not be an issue, right? Kind regards Uffe
HI Ulf, > > Well, I don't like to bail out because this error is not fatal for basic > > operations. How about releasing priv->pinctrl again with an additional > > warning that pinctrl settings are broken and will prevent 1.8v modes? > > > > Opinions? > > Hmm, from a mmc driver probe point of view, I don't quite share this approach. > > I would rather fail as it forces the DTB to be corrected immediately, > rather than trusting some developer to look at a warning in a log. The > point is, in such a case it may never get fixed, if the product is > shipped with the wrong DTB. I could agree to this arguement, iff the only way pinctrl_select fails is a DT misconfiguration. I am not sure if this is true right now, and we can't be sure about the future. Or? > My concern at this point is rather to break existing DTBs, but it > seems that should not be an issue, right? AFAIK not for the upstream ones, I don't know the customer ones. I still prefer to not bail out. Kind regards, Wolfram
Hi Wolfram, On Thu, Oct 31, 2019 at 11:58 PM Wolfram Sang <wsa@the-dreams.de> wrote: > > > Well, I don't like to bail out because this error is not fatal for basic > > > operations. How about releasing priv->pinctrl again with an additional > > > warning that pinctrl settings are broken and will prevent 1.8v modes? > > > > > > Opinions? > > > > Hmm, from a mmc driver probe point of view, I don't quite share this approach. > > > > I would rather fail as it forces the DTB to be corrected immediately, > > rather than trusting some developer to look at a warning in a log. The > > point is, in such a case it may never get fixed, if the product is > > shipped with the wrong DTB. > > I could agree to this arguement, iff the only way pinctrl_select fails > is a DT misconfiguration. I am not sure if this is true right now, and > we can't be sure about the future. Or? Isn't "state_uhs" optional? So bailing out if it doesn't exist is wrong. "default" should be there, if the device node has pinctrl properties. renesas_sdhi_start_signal_voltage_switch() already handles fallback to 3v3 operation. Gr{oetje,eeting}s, Geert
On Thu, Nov 7, 2019 at 4:30 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Wolfram, > > On Thu, Oct 31, 2019 at 11:58 PM Wolfram Sang <wsa@the-dreams.de> wrote: > > > > Well, I don't like to bail out because this error is not fatal for basic > > > > operations. How about releasing priv->pinctrl again with an additional > > > > warning that pinctrl settings are broken and will prevent 1.8v modes? > > > > > > > > Opinions? > > > > > > Hmm, from a mmc driver probe point of view, I don't quite share this approach. > > > > > > I would rather fail as it forces the DTB to be corrected immediately, > > > rather than trusting some developer to look at a warning in a log. The > > > point is, in such a case it may never get fixed, if the product is > > > shipped with the wrong DTB. > > > > I could agree to this arguement, iff the only way pinctrl_select fails > > is a DT misconfiguration. I am not sure if this is true right now, and > > we can't be sure about the future. Or? > > Isn't "state_uhs" optional? So bailing out if it doesn't exist is wrong. > "default" should be there, if the device node has pinctrl properties. > > renesas_sdhi_start_signal_voltage_switch() already handles fallback > to 3v3 operation. > > Gr{oetje,eeting}s, > > Geert > Just ping this thread. I am not clear about what is the conclusion of how to deal with the error? Should I resend a new version of the patch? Regards, Chuhong > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index d4ada5cca2d1..dc5ad6632df3 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -694,8 +694,13 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (!IS_ERR(priv->pinctrl)) { priv->pins_default = pinctrl_lookup_state(priv->pinctrl, PINCTRL_STATE_DEFAULT); + if (IS_ERR(priv->pins_default)) + return PTR_ERR(priv->pins_default); + priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, "state_uhs"); + if (IS_ERR(priv->pins_uhs)) + return PTR_ERR(priv->pins_uhs); } host = tmio_mmc_host_alloc(pdev, mmc_data);
renesas_sdhi_probe misses checks for pinctrl_lookup_state and may miss failures. Add checks for them to fix the problem. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> --- drivers/mmc/host/renesas_sdhi_core.c | 5 +++++ 1 file changed, 5 insertions(+)