| Message ID | 20191128074522.69706-1-ludovic.desroches@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/3] dt-bindings: sdhci-of-at91: new compatible string and update properties | expand |
On Thu, 28 Nov 2019 at 08:45, Ludovic Desroches <ludovic.desroches@microchip.com> wrote: > > There is a new compatible string for the SAM9X60 sdhci device. It involves > an update of the properties about the clocks stuff. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > Reviewed-by: Rob Herring <robh@kernel.org> Applied for next, thanks! Kind regards Uffe > --- > > Changes: > - v3: rebase due to conflict with Nicolas' patch > - v2: remove the extra example and fix node label > > .../devicetree/bindings/mmc/sdhci-atmel.txt | 13 ++++++++++--- > 1 file changed, 10 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt > index 503c6dbac1b2..69edfd4d3922 100644 > --- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt > +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt > @@ -5,11 +5,16 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the > sdhci-of-at91 driver. > > Required properties: > -- compatible: Must be "atmel,sama5d2-sdhci". > +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". > - clocks: Phandlers to the clocks. > -- clock-names: Must be "hclock", "multclk", "baseclk"; > +- clock-names: Must be "hclock", "multclk", "baseclk" for > + "atmel,sama5d2-sdhci". > + Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". > > Optional properties: > +- assigned-clocks: The same with "multclk". > +- assigned-clock-rates The rate of "multclk" in order to not rely on the > + gck configuration set by previous components. > - microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is > inverted. The default polarity for this signal is described in the datasheet. > For instance on SAMA5D2, the pin is usually tied to the GND with a resistor > @@ -17,10 +22,12 @@ Optional properties: > > Example: > > -sdmmc0: sdio-host@a0000000 { > +mmc0: sdio-host@a0000000 { > compatible = "atmel,sama5d2-sdhci"; > reg = <0xa0000000 0x300>; > interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; > clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; > clock-names = "hclock", "multclk", "baseclk"; > + assigned-clocks = <&sdmmc0_gclk>; > + assigned-clock-rates = <480000000>; > }; > -- > 2.24.0 >
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt index 503c6dbac1b2..69edfd4d3922 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -5,11 +5,16 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-of-at91 driver. Required properties: -- compatible: Must be "atmel,sama5d2-sdhci". +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". - clocks: Phandlers to the clocks. -- clock-names: Must be "hclock", "multclk", "baseclk"; +- clock-names: Must be "hclock", "multclk", "baseclk" for + "atmel,sama5d2-sdhci". + Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". Optional properties: +- assigned-clocks: The same with "multclk". +- assigned-clock-rates The rate of "multclk" in order to not rely on the + gck configuration set by previous components. - microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is inverted. The default polarity for this signal is described in the datasheet. For instance on SAMA5D2, the pin is usually tied to the GND with a resistor @@ -17,10 +22,12 @@ Optional properties: Example: -sdmmc0: sdio-host@a0000000 { +mmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; clock-names = "hclock", "multclk", "baseclk"; + assigned-clocks = <&sdmmc0_gclk>; + assigned-clock-rates = <480000000>; };