diff mbox series

[07/28] ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property

Message ID 20200317093922.20785-8-lkundrak@v3.sk (mailing list archive)
State New, archived
Headers show
Series DT: Improve validation for Marvell SoCs | expand

Commit Message

Lubomir Rintel March 17, 2020, 9:39 a.m. UTC
This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:

  pxa168-aspenite.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
  pxa910-dkb.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/boot/dts/pxa168.dtsi | 2 +-
 arch/arm/boot/dts/pxa910.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Andrew Lunn March 17, 2020, 1:29 p.m. UTC | #1
On Tue, Mar 17, 2020 at 10:39:01AM +0100, Lubomir Rintel wrote:
> This way the device tree validator learns that each cell of the property
> constitutes a separate item. Otherwise it gets unnecessairly upset:
> 
>   pxa168-aspenite.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
>   pxa910-dkb.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index c6ac85e362d8a..ae2221a3f825f 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -140,7 +140,7 @@  twsi2: i2c@d4025000 {
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
+				interrupts = <5>, <6>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				clocks = <&soc_clocks PXA168_CLK_RTC>;
 				resets = <&soc_clocks PXA168_CLK_RTC>;
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 5f8e208916b31..774e8e9730924 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -152,7 +152,7 @@  twsi2: i2c@d4037000 {
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
+				interrupts = <5>, <6>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				clocks = <&soc_clocks PXA910_CLK_RTC>;
 				resets = <&soc_clocks PXA910_CLK_RTC>;