| Message ID | 20201203020516.225701-10-ebiggers@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | eMMC inline encryption support | expand |
On 3/12/20 4:05 am, Eric Biggers wrote: > From: Eric Biggers <ebiggers@google.com> > > Add support for Qualcomm Inline Crypto Engine (ICE) to sdhci-msm. > > The standard-compliant parts, such as querying the crypto capabilities > and enabling crypto for individual MMC requests, are already handled by > cqhci-crypto.c, which itself is wired into the blk-crypto framework. > However, ICE requires vendor-specific init, enable, and resume logic, > and it requires that keys be programmed and evicted by vendor-specific > SMC calls. Make the sdhci-msm driver handle these details. > > This is heavily inspired by the similar changes made for UFS, since the > UFS and eMMC ICE instances are very similar. See commit df4ec2fa7a4d > ("scsi: ufs-qcom: Add Inline Crypto Engine support"). > > I tested this on a Sony Xperia 10, which uses the Snapdragon 630 SoC, > which has basic upstream support. Mainly, I used android-xfstests > (https://github.com/tytso/xfstests-bld/blob/master/Documentation/android-xfstests.md) > to run the ext4 and f2fs encryption tests in a Debian chroot: > > android-xfstests -c ext4,f2fs -g encrypt -m inlinecrypt > > These tests included tests which verify that the on-disk ciphertext is > identical to that produced by a software implementation. I also > verified that ICE was actually being used. > > Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/Kconfig | 1 + > drivers/mmc/host/sdhci-msm.c | 265 ++++++++++++++++++++++++++++++++++- > 2 files changed, 262 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 31481c9fcc2ec..4f8ff5a690fba 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -544,6 +544,7 @@ config MMC_SDHCI_MSM > depends on MMC_SDHCI_PLTFM > select MMC_SDHCI_IO_ACCESSORS > select MMC_CQHCI > + select QCOM_SCM if MMC_CRYPTO && ARCH_QCOM > help > This selects the Secure Digital Host Controller Interface (SDHCI) > support present in Qualcomm SOCs. The controller supports > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 3451eb3255135..ce6c3edbef530 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -13,6 +13,7 @@ > #include <linux/pm_opp.h> > #include <linux/slab.h> > #include <linux/iopoll.h> > +#include <linux/qcom_scm.h> > #include <linux/regulator/consumer.h> > #include <linux/interconnect.h> > #include <linux/pinctrl/consumer.h> > @@ -256,10 +257,12 @@ struct sdhci_msm_variant_info { > struct sdhci_msm_host { > struct platform_device *pdev; > void __iomem *core_mem; /* MSM SDCC mapped address */ > + void __iomem *ice_mem; /* MSM ICE mapped address (if available) */ > int pwr_irq; /* power irq */ > struct clk *bus_clk; /* SDHC bus voter clock */ > struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/ > - struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */ > + /* core, iface, cal, sleep, and ice clocks */ > + struct clk_bulk_data bulk_clks[5]; > unsigned long clk_rate; > struct mmc_host *mmc; > struct opp_table *opp_table; > @@ -1785,6 +1788,235 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) > __sdhci_msm_set_clock(host, clock); > } > > +/*****************************************************************************\ > + * * > + * Inline Crypto Engine (ICE) support * > + * * > +\*****************************************************************************/ > + > +#ifdef CONFIG_MMC_CRYPTO > + > +#define AES_256_XTS_KEY_SIZE 64 > + > +/* QCOM ICE registers */ > + > +#define QCOM_ICE_REG_VERSION 0x0008 > + > +#define QCOM_ICE_REG_FUSE_SETTING 0x0010 > +#define QCOM_ICE_FUSE_SETTING_MASK 0x1 > +#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > +#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > + > +#define QCOM_ICE_REG_BIST_STATUS 0x0070 > +#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000 > + > +#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > + > +#define sdhci_msm_ice_writel(host, val, reg) \ > + writel((val), (host)->ice_mem + (reg)) > +#define sdhci_msm_ice_readl(host, reg) \ > + readl((host)->ice_mem + (reg)) > + > +static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host) > +{ > + struct device *dev = mmc_dev(msm_host->mmc); > + u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION); > + int major = regval >> 24; > + int minor = (regval >> 16) & 0xFF; > + int step = regval & 0xFFFF; > + > + /* For now this driver only supports ICE version 3. */ > + if (major != 3) { > + dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n", > + major, minor, step); > + return false; > + } > + > + dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > + major, minor, step); > + > + /* If fuses are blown, ICE might not work in the standard way. */ > + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING); > + if (regval & (QCOM_ICE_FUSE_SETTING_MASK | > + QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK | > + QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) { > + dev_warn(dev, "Fuses are blown; ICE is unusable!\n"); > + return false; > + } > + return true; > +} > + > +static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) > +{ > + return devm_clk_get(dev, "ice"); > +} > + > +static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, > + struct cqhci_host *cq_host) > +{ > + struct mmc_host *mmc = msm_host->mmc; > + struct device *dev = mmc_dev(mmc); > + struct resource *res; > + int err; > + > + if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS)) > + return 0; > + > + res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM, > + "ice"); > + if (!res) { > + dev_warn(dev, "ICE registers not found\n"); > + goto disable; > + } > + > + if (!qcom_scm_ice_available()) { > + dev_warn(dev, "ICE SCM interface not found\n"); > + goto disable; > + } > + > + msm_host->ice_mem = devm_ioremap_resource(dev, res); > + if (IS_ERR(msm_host->ice_mem)) { > + err = PTR_ERR(msm_host->ice_mem); > + dev_err(dev, "Failed to map ICE registers; err=%d\n", err); > + return err; > + } > + > + if (!sdhci_msm_ice_supported(msm_host)) > + goto disable; > + > + mmc->caps2 |= MMC_CAP2_CRYPTO; > + return 0; > + > +disable: > + dev_warn(dev, "Disabling inline encryption support\n"); > + return 0; > +} > + > +static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host) > +{ > + u32 regval; > + > + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); > + /* > + * Enable low power mode sequence > + * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0 > + */ > + regval |= 0x7000; > + sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); > +} > + > +static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host) > +{ > + u32 regval; > + > + /* ICE Optimizations Enable Sequence */ > + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); > + regval |= 0xD807100; > + /* ICE HPG requires delay before writing */ > + udelay(5); > + sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); > + udelay(5); > +} > + > +/* Poll until all BIST (built-in self test) bits are reset */ > +static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host) > +{ > + u32 regval; > + int err; > + > + err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS, > + regval, !(regval & QCOM_ICE_BIST_STATUS_MASK), > + 50, 5000); > + if (err) > + dev_err(mmc_dev(msm_host->mmc), > + "Timed out waiting for ICE self-test to complete\n"); > + return err; > +} > + > +static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > +{ > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > + return; > + sdhci_msm_ice_low_power_mode_enable(msm_host); > + sdhci_msm_ice_optimization_enable(msm_host); > + sdhci_msm_ice_wait_bist_status(msm_host); > +} > + > +static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) > +{ > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > + return 0; > + return sdhci_msm_ice_wait_bist_status(msm_host); > +} > + > +/* > + * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires > + * vendor-specific SCM calls for this; it doesn't support the standard way. > + */ > +static int sdhci_msm_program_key(struct cqhci_host *cq_host, > + const union cqhci_crypto_cfg_entry *cfg, > + int slot) > +{ > + struct device *dev = mmc_dev(cq_host->mmc); > + union cqhci_crypto_cap_entry cap; > + union { > + u8 bytes[AES_256_XTS_KEY_SIZE]; > + u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)]; > + } key; > + int i; > + int err; > + > + if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE)) > + return qcom_scm_ice_invalidate_key(slot); > + > + /* Only AES-256-XTS has been tested so far. */ > + cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx]; > + if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS || > + cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) { > + dev_err_ratelimited(dev, > + "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n", > + cap.algorithm_id, cap.key_size); > + return -EINVAL; > + } > + > + memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE); > + > + /* > + * The SCM call byte-swaps the 32-bit words of the key. So we have to > + * do the same, in order for the final key be correct. > + */ > + for (i = 0; i < ARRAY_SIZE(key.words); i++) > + __cpu_to_be32s(&key.words[i]); > + > + err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE, > + QCOM_SCM_ICE_CIPHER_AES_256_XTS, > + cfg->data_unit_size); > + memzero_explicit(&key, sizeof(key)); > + return err; > +} > +#else /* CONFIG_MMC_CRYPTO */ > +static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) > +{ > + return NULL; > +} > + > +static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, > + struct cqhci_host *cq_host) > +{ > + return 0; > +} > + > +static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > +{ > +} > + > +static inline int __maybe_unused > +sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) > +{ > + return 0; > +} > +#endif /* !CONFIG_MMC_CRYPTO */ > + > /*****************************************************************************\ > * * > * MSM Command Queue Engine (CQE) * > @@ -1803,6 +2035,16 @@ static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask) > return 0; > } > > +static void sdhci_msm_cqe_enable(struct mmc_host *mmc) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > + > + sdhci_cqe_enable(mmc); > + sdhci_msm_ice_enable(msm_host); > +} > + > static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) > { > struct sdhci_host *host = mmc_priv(mmc); > @@ -1835,8 +2077,11 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) > } > > static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { > - .enable = sdhci_cqe_enable, > + .enable = sdhci_msm_cqe_enable, > .disable = sdhci_msm_cqe_disable, > +#ifdef CONFIG_MMC_CRYPTO > + .program_key = sdhci_msm_program_key, > +#endif > }; > > static int sdhci_msm_cqe_add_host(struct sdhci_host *host, > @@ -1872,6 +2117,10 @@ static int sdhci_msm_cqe_add_host(struct sdhci_host *host, > > dma64 = host->flags & SDHCI_USE_64_BIT_DMA; > > + ret = sdhci_msm_ice_init(msm_host, cq_host); > + if (ret) > + goto cleanup; > + > ret = cqhci_init(cq_host, host->mmc, dma64); > if (ret) { > dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n", > @@ -2321,6 +2570,11 @@ static int sdhci_msm_probe(struct platform_device *pdev) > clk = NULL; > msm_host->bulk_clks[3].clk = clk; > > + clk = sdhci_msm_ice_get_clk(&pdev->dev); > + if (IS_ERR(clk)) > + clk = NULL; > + msm_host->bulk_clks[4].clk = clk; > + > ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks), > msm_host->bulk_clks); > if (ret) > @@ -2531,12 +2785,15 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) > * Whenever core-clock is gated dynamically, it's needed to > * restore the SDR DLL settings when the clock is ungated. > */ > - if (msm_host->restore_dll_config && msm_host->clk_rate) > + if (msm_host->restore_dll_config && msm_host->clk_rate) { > ret = sdhci_msm_restore_sdr_dll_config(host); > + if (ret) > + return ret; > + } > > dev_pm_opp_set_rate(dev, msm_host->clk_rate); > > - return ret; > + return sdhci_msm_ice_resume(msm_host); > } > > static const struct dev_pm_ops sdhci_msm_pm_ops = { >
On Wed, Dec 02, 2020 at 06:05:16PM -0800, Eric Biggers wrote: > From: Eric Biggers <ebiggers@google.com> > > Add support for Qualcomm Inline Crypto Engine (ICE) to sdhci-msm. > > The standard-compliant parts, such as querying the crypto capabilities > and enabling crypto for individual MMC requests, are already handled by > cqhci-crypto.c, which itself is wired into the blk-crypto framework. > However, ICE requires vendor-specific init, enable, and resume logic, > and it requires that keys be programmed and evicted by vendor-specific > SMC calls. Make the sdhci-msm driver handle these details. > > This is heavily inspired by the similar changes made for UFS, since the > UFS and eMMC ICE instances are very similar. See commit df4ec2fa7a4d > ("scsi: ufs-qcom: Add Inline Crypto Engine support"). > > I tested this on a Sony Xperia 10, which uses the Snapdragon 630 SoC, > which has basic upstream support. Mainly, I used android-xfstests > (https://github.com/tytso/xfstests-bld/blob/master/Documentation/android-xfstests.md) > to run the ext4 and f2fs encryption tests in a Debian chroot: > > android-xfstests -c ext4,f2fs -g encrypt -m inlinecrypt > > These tests included tests which verify that the on-disk ciphertext is > identical to that produced by a software implementation. I also > verified that ICE was actually being used. > > Signed-off-by: Eric Biggers <ebiggers@google.com> > --- > drivers/mmc/host/Kconfig | 1 + > drivers/mmc/host/sdhci-msm.c | 265 ++++++++++++++++++++++++++++++++++- > 2 files changed, 262 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 31481c9fcc2ec..4f8ff5a690fba 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -544,6 +544,7 @@ config MMC_SDHCI_MSM > depends on MMC_SDHCI_PLTFM > select MMC_SDHCI_IO_ACCESSORS > select MMC_CQHCI > + select QCOM_SCM if MMC_CRYPTO && ARCH_QCOM > help > This selects the Secure Digital Host Controller Interface (SDHCI) > support present in Qualcomm SOCs. The controller supports > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 3451eb3255135..ce6c3edbef530 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -13,6 +13,7 @@ > #include <linux/pm_opp.h> > #include <linux/slab.h> > #include <linux/iopoll.h> > +#include <linux/qcom_scm.h> > #include <linux/regulator/consumer.h> > #include <linux/interconnect.h> > #include <linux/pinctrl/consumer.h> > @@ -256,10 +257,12 @@ struct sdhci_msm_variant_info { > struct sdhci_msm_host { > struct platform_device *pdev; > void __iomem *core_mem; /* MSM SDCC mapped address */ > + void __iomem *ice_mem; /* MSM ICE mapped address (if available) */ > int pwr_irq; /* power irq */ > struct clk *bus_clk; /* SDHC bus voter clock */ > struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/ > - struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */ > + /* core, iface, cal, sleep, and ice clocks */ > + struct clk_bulk_data bulk_clks[5]; > unsigned long clk_rate; > struct mmc_host *mmc; > struct opp_table *opp_table; > @@ -1785,6 +1788,235 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) > __sdhci_msm_set_clock(host, clock); > } > > +/*****************************************************************************\ > + * * > + * Inline Crypto Engine (ICE) support * > + * * > +\*****************************************************************************/ > + > +#ifdef CONFIG_MMC_CRYPTO > + > +#define AES_256_XTS_KEY_SIZE 64 > + > +/* QCOM ICE registers */ > + > +#define QCOM_ICE_REG_VERSION 0x0008 > + > +#define QCOM_ICE_REG_FUSE_SETTING 0x0010 > +#define QCOM_ICE_FUSE_SETTING_MASK 0x1 > +#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > +#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > + > +#define QCOM_ICE_REG_BIST_STATUS 0x0070 > +#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000 > + > +#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > + > +#define sdhci_msm_ice_writel(host, val, reg) \ > + writel((val), (host)->ice_mem + (reg)) > +#define sdhci_msm_ice_readl(host, reg) \ > + readl((host)->ice_mem + (reg)) > + > +static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host) > +{ > + struct device *dev = mmc_dev(msm_host->mmc); > + u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION); > + int major = regval >> 24; > + int minor = (regval >> 16) & 0xFF; > + int step = regval & 0xFFFF; > + > + /* For now this driver only supports ICE version 3. */ > + if (major != 3) { > + dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n", > + major, minor, step); > + return false; > + } > + > + dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > + major, minor, step); > + > + /* If fuses are blown, ICE might not work in the standard way. */ > + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING); > + if (regval & (QCOM_ICE_FUSE_SETTING_MASK | > + QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK | > + QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) { > + dev_warn(dev, "Fuses are blown; ICE is unusable!\n"); > + return false; > + } > + return true; > +} > + > +static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) > +{ > + return devm_clk_get(dev, "ice"); > +} > + > +static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, > + struct cqhci_host *cq_host) > +{ > + struct mmc_host *mmc = msm_host->mmc; > + struct device *dev = mmc_dev(mmc); > + struct resource *res; > + int err; > + > + if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS)) > + return 0; > + > + res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM, > + "ice"); > + if (!res) { > + dev_warn(dev, "ICE registers not found\n"); > + goto disable; > + } > + > + if (!qcom_scm_ice_available()) { > + dev_warn(dev, "ICE SCM interface not found\n"); > + goto disable; > + } > + > + msm_host->ice_mem = devm_ioremap_resource(dev, res); > + if (IS_ERR(msm_host->ice_mem)) { > + err = PTR_ERR(msm_host->ice_mem); > + dev_err(dev, "Failed to map ICE registers; err=%d\n", err); > + return err; > + } > + > + if (!sdhci_msm_ice_supported(msm_host)) > + goto disable; > + > + mmc->caps2 |= MMC_CAP2_CRYPTO; > + return 0; > + > +disable: > + dev_warn(dev, "Disabling inline encryption support\n"); > + return 0; > +} > + > +static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host) > +{ > + u32 regval; > + > + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); > + /* > + * Enable low power mode sequence > + * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0 > + */ > + regval |= 0x7000; > + sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); > +} > + > +static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host) > +{ > + u32 regval; > + > + /* ICE Optimizations Enable Sequence */ > + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); > + regval |= 0xD807100; > + /* ICE HPG requires delay before writing */ > + udelay(5); > + sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); > + udelay(5); > +} > + > +/* Poll until all BIST (built-in self test) bits are reset */ > +static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host) > +{ > + u32 regval; > + int err; > + > + err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS, > + regval, !(regval & QCOM_ICE_BIST_STATUS_MASK), > + 50, 5000); > + if (err) > + dev_err(mmc_dev(msm_host->mmc), > + "Timed out waiting for ICE self-test to complete\n"); > + return err; > +} > + > +static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > +{ > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > + return; > + sdhci_msm_ice_low_power_mode_enable(msm_host); > + sdhci_msm_ice_optimization_enable(msm_host); > + sdhci_msm_ice_wait_bist_status(msm_host); If sdhci_msm_ice_wait_bist_status() fails, should we really ignore the error and continue en/decrypting with ICE? I'm not sure what the BIST failing might really mean, but if it means it's possible that the ICE en/decrypts incorrectly it would be bad to continue to use it..... > +} > + > +static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) > +{ > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > + return 0; > + return sdhci_msm_ice_wait_bist_status(msm_host); > +} > + > +/* > + * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires > + * vendor-specific SCM calls for this; it doesn't support the standard way. > + */ > +static int sdhci_msm_program_key(struct cqhci_host *cq_host, > + const union cqhci_crypto_cfg_entry *cfg, > + int slot) > +{ > + struct device *dev = mmc_dev(cq_host->mmc); > + union cqhci_crypto_cap_entry cap; > + union { > + u8 bytes[AES_256_XTS_KEY_SIZE]; > + u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)]; > + } key; > + int i; > + int err; > + > + if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE)) > + return qcom_scm_ice_invalidate_key(slot); > + > + /* Only AES-256-XTS has been tested so far. */ > + cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx]; > + if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS || > + cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) { > + dev_err_ratelimited(dev, > + "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n", > + cap.algorithm_id, cap.key_size); > + return -EINVAL; > + } > + > + memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE); > + > + /* > + * The SCM call byte-swaps the 32-bit words of the key. So we have to > + * do the same, in order for the final key be correct. > + */ > + for (i = 0; i < ARRAY_SIZE(key.words); i++) > + __cpu_to_be32s(&key.words[i]); > + > + err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE, > + QCOM_SCM_ICE_CIPHER_AES_256_XTS, > + cfg->data_unit_size); > + memzero_explicit(&key, sizeof(key)); > + return err; > +} > +#else /* CONFIG_MMC_CRYPTO */ > +static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) > +{ > + return NULL; > +} > + > +static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, > + struct cqhci_host *cq_host) > +{ > + return 0; > +} > + > +static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > +{ > +} > + > +static inline int __maybe_unused > +sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) > +{ > + return 0; > +} > +#endif /* !CONFIG_MMC_CRYPTO */ > + > /*****************************************************************************\ > * * > * MSM Command Queue Engine (CQE) * > @@ -1803,6 +2035,16 @@ static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask) > return 0; > } > > +static void sdhci_msm_cqe_enable(struct mmc_host *mmc) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > + > + sdhci_cqe_enable(mmc); > + sdhci_msm_ice_enable(msm_host); > +} > + > static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) > { > struct sdhci_host *host = mmc_priv(mmc); > @@ -1835,8 +2077,11 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) > } > > static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { > - .enable = sdhci_cqe_enable, > + .enable = sdhci_msm_cqe_enable, > .disable = sdhci_msm_cqe_disable, > +#ifdef CONFIG_MMC_CRYPTO > + .program_key = sdhci_msm_program_key, > +#endif > }; > > static int sdhci_msm_cqe_add_host(struct sdhci_host *host, > @@ -1872,6 +2117,10 @@ static int sdhci_msm_cqe_add_host(struct sdhci_host *host, > > dma64 = host->flags & SDHCI_USE_64_BIT_DMA; > > + ret = sdhci_msm_ice_init(msm_host, cq_host); > + if (ret) > + goto cleanup; > + > ret = cqhci_init(cq_host, host->mmc, dma64); > if (ret) { > dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n", > @@ -2321,6 +2570,11 @@ static int sdhci_msm_probe(struct platform_device *pdev) > clk = NULL; > msm_host->bulk_clks[3].clk = clk; > > + clk = sdhci_msm_ice_get_clk(&pdev->dev); > + if (IS_ERR(clk)) > + clk = NULL; > + msm_host->bulk_clks[4].clk = clk; > + > ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks), > msm_host->bulk_clks); > if (ret) > @@ -2531,12 +2785,15 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) > * Whenever core-clock is gated dynamically, it's needed to > * restore the SDR DLL settings when the clock is ungated. > */ > - if (msm_host->restore_dll_config && msm_host->clk_rate) > + if (msm_host->restore_dll_config && msm_host->clk_rate) { > ret = sdhci_msm_restore_sdr_dll_config(host); > + if (ret) > + return ret; > + } > > dev_pm_opp_set_rate(dev, msm_host->clk_rate); > > - return ret; > + return sdhci_msm_ice_resume(msm_host); > } Doesn't this modify existing behaviour if sdhci_msm_restore_sdr_dll_config() returns a non-zero value? Previously, dev_pm_opp_set_rate() would always be called regardless of ret, but now it's not called on non-zero ret value. > > static const struct dev_pm_ops sdhci_msm_pm_ops = { > -- > 2.29.2 >
On Sat, Dec 05, 2020 at 12:09:16PM +0000, Satya Tangirala wrote: > > +static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > > +{ > > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > > + return; > > + sdhci_msm_ice_low_power_mode_enable(msm_host); > > + sdhci_msm_ice_optimization_enable(msm_host); > > + sdhci_msm_ice_wait_bist_status(msm_host); > If sdhci_msm_ice_wait_bist_status() fails, should we really ignore the > error and continue en/decrypting with ICE? I'm not sure what the BIST > failing might really mean, but if it means it's possible that the ICE > en/decrypts incorrectly it would be bad to continue to use it..... The "built-in self-test" that the ICE hardware does seems to be a FIPS compliance thing which never actually fails in practice. If it does fail, then according to https://csrc.nist.gov/CSRC/media/projects/cryptographic-module-validation-program/documents/security-policies/140sp2588.pdf (which is the closest thing I have to any documentation for ICE, other than the eMMC standard), then the hardware itself will reject any crypto requests. So rejecting them in software too should be redundant. It's also worth noting that just because a hardware-level self-test passes doesn't mean that the actual end-to-end storage encryption is working correctly. To verify that you need to run something like Android's vts_kernel_encryption_test, or the ciphertext verification tests in xfstests. The hardware itself is really the wrong place to be testing the encryption. It would be possible to add some code that sets a flag in the cqhci_host if the ICE hardware test fails, and make cqhci_request() fail any crypto-enabled requests if that flag is set. It just doesn't seem necessary, and I think we should error on the side of less complexity for now. What I was actually worried about is what happens if ICE needs to be used but its self-test is still running, so it doesn't want to accept requests yet. I'm not sure that's really a thing or not (one might hope the MMC host doesn't say it's done resetting until the ICE tests are done), but that's why I left in the code that waits for the tests to complete, which the downstream driver had. Neeraj and Barani, if you have any additional insight or suggestions on this, or know of anything I may be overlooking, that would be greatly appreciated. Otherwise I just plan to add a comment that summarizes what I said above. > > @@ -2531,12 +2785,15 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) > > * Whenever core-clock is gated dynamically, it's needed to > > * restore the SDR DLL settings when the clock is ungated. > > */ > > - if (msm_host->restore_dll_config && msm_host->clk_rate) > > + if (msm_host->restore_dll_config && msm_host->clk_rate) { > > ret = sdhci_msm_restore_sdr_dll_config(host); > > + if (ret) > > + return ret; > > + } > > > > dev_pm_opp_set_rate(dev, msm_host->clk_rate); > > > > - return ret; > > + return sdhci_msm_ice_resume(msm_host); > > } > Doesn't this modify existing behaviour if > sdhci_msm_restore_sdr_dll_config() returns a non-zero value? Previously, > dev_pm_opp_set_rate() would always be called regardless of ret, but now > it's not called on non-zero ret value. Yes but I don't think it matters. IIUC, if a device's ->runtime_resume() callback fails, then Linux's runtime power management framework keeps the device in an error state and doesn't consider it to be resumed. So if resuming a device involves N different things, and one of them fails, I don't think we need to worry about trying to still do the other N-1 things; we can just return an error on the first failure. - Eric
On Sat, Dec 05, 2020 at 11:43:21AM -0800, Eric Biggers wrote: > On Sat, Dec 05, 2020 at 12:09:16PM +0000, Satya Tangirala wrote: > > > +static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > > > +{ > > > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > > > + return; > > > + sdhci_msm_ice_low_power_mode_enable(msm_host); > > > + sdhci_msm_ice_optimization_enable(msm_host); > > > + sdhci_msm_ice_wait_bist_status(msm_host); > > If sdhci_msm_ice_wait_bist_status() fails, should we really ignore the > > error and continue en/decrypting with ICE? I'm not sure what the BIST > > failing might really mean, but if it means it's possible that the ICE > > en/decrypts incorrectly it would be bad to continue to use it..... > > The "built-in self-test" that the ICE hardware does seems to be a FIPS > compliance thing which never actually fails in practice. > > If it does fail, then according to > https://csrc.nist.gov/CSRC/media/projects/cryptographic-module-validation-program/documents/security-policies/140sp2588.pdf > (which is the closest thing I have to any documentation for ICE, other than the > eMMC standard), then the hardware itself will reject any crypto requests. So > rejecting them in software too should be redundant. > > It's also worth noting that just because a hardware-level self-test passes > doesn't mean that the actual end-to-end storage encryption is working correctly. > To verify that you need to run something like Android's > vts_kernel_encryption_test, or the ciphertext verification tests in xfstests. > The hardware itself is really the wrong place to be testing the encryption. > > It would be possible to add some code that sets a flag in the cqhci_host if the > ICE hardware test fails, and make cqhci_request() fail any crypto-enabled > requests if that flag is set. It just doesn't seem necessary, and I think we > should error on the side of less complexity for now. > > What I was actually worried about is what happens if ICE needs to be used but > its self-test is still running, so it doesn't want to accept requests yet. I'm > not sure that's really a thing or not (one might hope the MMC host doesn't say > it's done resetting until the ICE tests are done), but that's why I left in the > code that waits for the tests to complete, which the downstream driver had. > > Neeraj and Barani, if you have any additional insight or suggestions on this, or > know of anything I may be overlooking, that would be greatly appreciated. > > Otherwise I just plan to add a comment that summarizes what I said above. > Sure, sounds good to me :). > > > @@ -2531,12 +2785,15 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) > > > * Whenever core-clock is gated dynamically, it's needed to > > > * restore the SDR DLL settings when the clock is ungated. > > > */ > > > - if (msm_host->restore_dll_config && msm_host->clk_rate) > > > + if (msm_host->restore_dll_config && msm_host->clk_rate) { > > > ret = sdhci_msm_restore_sdr_dll_config(host); > > > + if (ret) > > > + return ret; > > > + } > > > > > > dev_pm_opp_set_rate(dev, msm_host->clk_rate); > > > > > > - return ret; > > > + return sdhci_msm_ice_resume(msm_host); > > > } > > Doesn't this modify existing behaviour if > > sdhci_msm_restore_sdr_dll_config() returns a non-zero value? Previously, > > dev_pm_opp_set_rate() would always be called regardless of ret, but now > > it's not called on non-zero ret value. > > Yes but I don't think it matters. IIUC, if a device's ->runtime_resume() > callback fails, then Linux's runtime power management framework keeps the device > in an error state and doesn't consider it to be resumed. > > So if resuming a device involves N different things, and one of them fails, I > don't think we need to worry about trying to still do the other N-1 things; we > can just return an error on the first failure. > Ah, alright. Once you do add the comment you mentioned above, please feel free to add Reviewed-by: Satya Tangirala <satyat@google.com> > - Eric
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 31481c9fcc2ec..4f8ff5a690fba 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -544,6 +544,7 @@ config MMC_SDHCI_MSM depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS select MMC_CQHCI + select QCOM_SCM if MMC_CRYPTO && ARCH_QCOM help This selects the Secure Digital Host Controller Interface (SDHCI) support present in Qualcomm SOCs. The controller supports diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 3451eb3255135..ce6c3edbef530 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -13,6 +13,7 @@ #include <linux/pm_opp.h> #include <linux/slab.h> #include <linux/iopoll.h> +#include <linux/qcom_scm.h> #include <linux/regulator/consumer.h> #include <linux/interconnect.h> #include <linux/pinctrl/consumer.h> @@ -256,10 +257,12 @@ struct sdhci_msm_variant_info { struct sdhci_msm_host { struct platform_device *pdev; void __iomem *core_mem; /* MSM SDCC mapped address */ + void __iomem *ice_mem; /* MSM ICE mapped address (if available) */ int pwr_irq; /* power irq */ struct clk *bus_clk; /* SDHC bus voter clock */ struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/ - struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */ + /* core, iface, cal, sleep, and ice clocks */ + struct clk_bulk_data bulk_clks[5]; unsigned long clk_rate; struct mmc_host *mmc; struct opp_table *opp_table; @@ -1785,6 +1788,235 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) __sdhci_msm_set_clock(host, clock); } +/*****************************************************************************\ + * * + * Inline Crypto Engine (ICE) support * + * * +\*****************************************************************************/ + +#ifdef CONFIG_MMC_CRYPTO + +#define AES_256_XTS_KEY_SIZE 64 + +/* QCOM ICE registers */ + +#define QCOM_ICE_REG_VERSION 0x0008 + +#define QCOM_ICE_REG_FUSE_SETTING 0x0010 +#define QCOM_ICE_FUSE_SETTING_MASK 0x1 +#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 +#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 + +#define QCOM_ICE_REG_BIST_STATUS 0x0070 +#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000 + +#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 + +#define sdhci_msm_ice_writel(host, val, reg) \ + writel((val), (host)->ice_mem + (reg)) +#define sdhci_msm_ice_readl(host, reg) \ + readl((host)->ice_mem + (reg)) + +static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host) +{ + struct device *dev = mmc_dev(msm_host->mmc); + u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION); + int major = regval >> 24; + int minor = (regval >> 16) & 0xFF; + int step = regval & 0xFFFF; + + /* For now this driver only supports ICE version 3. */ + if (major != 3) { + dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n", + major, minor, step); + return false; + } + + dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", + major, minor, step); + + /* If fuses are blown, ICE might not work in the standard way. */ + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING); + if (regval & (QCOM_ICE_FUSE_SETTING_MASK | + QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK | + QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) { + dev_warn(dev, "Fuses are blown; ICE is unusable!\n"); + return false; + } + return true; +} + +static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) +{ + return devm_clk_get(dev, "ice"); +} + +static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, + struct cqhci_host *cq_host) +{ + struct mmc_host *mmc = msm_host->mmc; + struct device *dev = mmc_dev(mmc); + struct resource *res; + int err; + + if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS)) + return 0; + + res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM, + "ice"); + if (!res) { + dev_warn(dev, "ICE registers not found\n"); + goto disable; + } + + if (!qcom_scm_ice_available()) { + dev_warn(dev, "ICE SCM interface not found\n"); + goto disable; + } + + msm_host->ice_mem = devm_ioremap_resource(dev, res); + if (IS_ERR(msm_host->ice_mem)) { + err = PTR_ERR(msm_host->ice_mem); + dev_err(dev, "Failed to map ICE registers; err=%d\n", err); + return err; + } + + if (!sdhci_msm_ice_supported(msm_host)) + goto disable; + + mmc->caps2 |= MMC_CAP2_CRYPTO; + return 0; + +disable: + dev_warn(dev, "Disabling inline encryption support\n"); + return 0; +} + +static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host) +{ + u32 regval; + + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); + /* + * Enable low power mode sequence + * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0 + */ + regval |= 0x7000; + sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); +} + +static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host) +{ + u32 regval; + + /* ICE Optimizations Enable Sequence */ + regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); + regval |= 0xD807100; + /* ICE HPG requires delay before writing */ + udelay(5); + sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); + udelay(5); +} + +/* Poll until all BIST (built-in self test) bits are reset */ +static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host) +{ + u32 regval; + int err; + + err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS, + regval, !(regval & QCOM_ICE_BIST_STATUS_MASK), + 50, 5000); + if (err) + dev_err(mmc_dev(msm_host->mmc), + "Timed out waiting for ICE self-test to complete\n"); + return err; +} + +static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) +{ + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) + return; + sdhci_msm_ice_low_power_mode_enable(msm_host); + sdhci_msm_ice_optimization_enable(msm_host); + sdhci_msm_ice_wait_bist_status(msm_host); +} + +static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) +{ + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) + return 0; + return sdhci_msm_ice_wait_bist_status(msm_host); +} + +/* + * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires + * vendor-specific SCM calls for this; it doesn't support the standard way. + */ +static int sdhci_msm_program_key(struct cqhci_host *cq_host, + const union cqhci_crypto_cfg_entry *cfg, + int slot) +{ + struct device *dev = mmc_dev(cq_host->mmc); + union cqhci_crypto_cap_entry cap; + union { + u8 bytes[AES_256_XTS_KEY_SIZE]; + u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)]; + } key; + int i; + int err; + + if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE)) + return qcom_scm_ice_invalidate_key(slot); + + /* Only AES-256-XTS has been tested so far. */ + cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx]; + if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS || + cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) { + dev_err_ratelimited(dev, + "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n", + cap.algorithm_id, cap.key_size); + return -EINVAL; + } + + memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE); + + /* + * The SCM call byte-swaps the 32-bit words of the key. So we have to + * do the same, in order for the final key be correct. + */ + for (i = 0; i < ARRAY_SIZE(key.words); i++) + __cpu_to_be32s(&key.words[i]); + + err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE, + QCOM_SCM_ICE_CIPHER_AES_256_XTS, + cfg->data_unit_size); + memzero_explicit(&key, sizeof(key)); + return err; +} +#else /* CONFIG_MMC_CRYPTO */ +static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) +{ + return NULL; +} + +static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, + struct cqhci_host *cq_host) +{ + return 0; +} + +static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) +{ +} + +static inline int __maybe_unused +sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) +{ + return 0; +} +#endif /* !CONFIG_MMC_CRYPTO */ + /*****************************************************************************\ * * * MSM Command Queue Engine (CQE) * @@ -1803,6 +2035,16 @@ static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask) return 0; } +static void sdhci_msm_cqe_enable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + + sdhci_cqe_enable(mmc); + sdhci_msm_ice_enable(msm_host); +} + static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) { struct sdhci_host *host = mmc_priv(mmc); @@ -1835,8 +2077,11 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) } static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { - .enable = sdhci_cqe_enable, + .enable = sdhci_msm_cqe_enable, .disable = sdhci_msm_cqe_disable, +#ifdef CONFIG_MMC_CRYPTO + .program_key = sdhci_msm_program_key, +#endif }; static int sdhci_msm_cqe_add_host(struct sdhci_host *host, @@ -1872,6 +2117,10 @@ static int sdhci_msm_cqe_add_host(struct sdhci_host *host, dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + ret = sdhci_msm_ice_init(msm_host, cq_host); + if (ret) + goto cleanup; + ret = cqhci_init(cq_host, host->mmc, dma64); if (ret) { dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n", @@ -2321,6 +2570,11 @@ static int sdhci_msm_probe(struct platform_device *pdev) clk = NULL; msm_host->bulk_clks[3].clk = clk; + clk = sdhci_msm_ice_get_clk(&pdev->dev); + if (IS_ERR(clk)) + clk = NULL; + msm_host->bulk_clks[4].clk = clk; + ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks), msm_host->bulk_clks); if (ret) @@ -2531,12 +2785,15 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) * Whenever core-clock is gated dynamically, it's needed to * restore the SDR DLL settings when the clock is ungated. */ - if (msm_host->restore_dll_config && msm_host->clk_rate) + if (msm_host->restore_dll_config && msm_host->clk_rate) { ret = sdhci_msm_restore_sdr_dll_config(host); + if (ret) + return ret; + } dev_pm_opp_set_rate(dev, msm_host->clk_rate); - return ret; + return sdhci_msm_ice_resume(msm_host); } static const struct dev_pm_ops sdhci_msm_pm_ops = {