| Message ID | 20210120142801.334550-3-arnd@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: remove obsolete drivers | expand |
Arnd Bergmann <arnd@kernel.org> 于2021年1月21日周四 上午3:28写道： > > From: Arnd Bergmann <arnd@arndb.de> > > The CSR SiRF prima2/atlas platforms are getting removed, so this driver > is no longer needed. > > Cc: Barry Song <baohua@kernel.org> > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> > --- > .../devicetree/bindings/mmc/sdhci-sirf.txt | 18 -- > drivers/mmc/host/Kconfig | 12 - > drivers/mmc/host/Makefile | 1 - > drivers/mmc/host/sdhci-sirf.c | 235 ------------------ > 4 files changed, 266 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sirf.txt > delete mode 100644 drivers/mmc/host/sdhci-sirf.c > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt > deleted file mode 100644 > index dd6ed464bcb8..000000000000 > --- a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt > +++ /dev/null > @@ -1,18 +0,0 @@ > -* SiRFprimII/marco/atlas6 SDHCI Controller > - > -This file documents differences between the core properties in mmc.txt > -and the properties used by the sdhci-sirf driver. > - > -Required properties: > -- compatible: sirf,prima2-sdhc > - > -Optional properties: > -- cd-gpios: card detect gpio, with zero flags. > - > -Example: > - > - sd0: sdhci@56000000 { > - compatible = "sirf,prima2-sdhc"; > - reg = <0xcd000000 0x100000>; > - cd-gpios = <&gpio 6 0>; > - }; > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 255d37e8bd3a..b67f6028b6f3 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -312,18 +312,6 @@ config MMC_SDHCI_S3C > > If unsure, say N. > > -config MMC_SDHCI_SIRF > - tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs" > - depends on ARCH_SIRF || COMPILE_TEST > - depends on MMC_SDHCI_PLTFM > - select MMC_SDHCI_IO_ACCESSORS > - help > - This selects the SDHCI support for SiRF System-on-Chip devices. > - > - If you have a controller with this interface, say Y or M here. > - > - If unsure, say N. > - > config MMC_SDHCI_PXAV3 > tristate "Marvell MMP2 SD Host Controller support (PXAV3)" > depends on CLKDEV_LOOKUP > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 43136d382d5f..d2ec428cc808 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -19,7 +19,6 @@ obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o > obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o > obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o > obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o > -obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o > obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o > obj-$(CONFIG_MMC_SDHCI_MILBEAUT) += sdhci-milbeaut.o > obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o > diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c > deleted file mode 100644 > index e9b347b3af7e..000000000000 > --- a/drivers/mmc/host/sdhci-sirf.c > +++ /dev/null > @@ -1,235 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * SDHCI support for SiRF primaII and marco SoCs > - * > - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. > - */ > - > -#include <linux/delay.h> > -#include <linux/device.h> > -#include <linux/mmc/host.h> > -#include <linux/module.h> > -#include <linux/of.h> > -#include <linux/mmc/slot-gpio.h> > -#include "sdhci-pltfm.h" > - > -#define SDHCI_CLK_DELAY_SETTING 0x4C > -#define SDHCI_SIRF_8BITBUS BIT(3) > -#define SIRF_TUNING_COUNT 16384 > - > -static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width) > -{ > - u8 ctrl; > - > - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); > - ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS); > - > - /* > - * CSR atlas7 and prima2 SD host version is not 3.0 > - * 8bit-width enable bit of CSR SD hosts is 3, > - * while stardard hosts use bit 5 > - */ > - if (width == MMC_BUS_WIDTH_8) > - ctrl |= SDHCI_SIRF_8BITBUS; > - else if (width == MMC_BUS_WIDTH_4) > - ctrl |= SDHCI_CTRL_4BITBUS; > - > - sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); > -} > - > -static u32 sdhci_sirf_readl_le(struct sdhci_host *host, int reg) > -{ > - u32 val = readl(host->ioaddr + reg); > - > - if (unlikely((reg == SDHCI_CAPABILITIES_1) && > - (host->mmc->caps & MMC_CAP_UHS_SDR50))) { > - /* fake CAP_1 register */ > - val = SDHCI_SUPPORT_DDR50 | > - SDHCI_SUPPORT_SDR50 | SDHCI_USE_SDR50_TUNING; > - } > - > - if (unlikely(reg == SDHCI_SLOT_INT_STATUS)) { > - u32 prss = val; > - /* fake chips as V3.0 host conreoller */ > - prss &= ~(0xFF << 16); > - val = prss | (SDHCI_SPEC_300 << 16); > - } > - return val; > -} > - > -static u16 sdhci_sirf_readw_le(struct sdhci_host *host, int reg) > -{ > - u16 ret = 0; > - > - ret = readw(host->ioaddr + reg); > - > - if (unlikely(reg == SDHCI_HOST_VERSION)) { > - ret = readw(host->ioaddr + SDHCI_HOST_VERSION); > - ret |= SDHCI_SPEC_300; > - } > - > - return ret; > -} > - > -static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode) > -{ > - int tuning_seq_cnt = 3; > - int phase; > - u8 tuned_phase_cnt = 0; > - int rc = 0, longest_range = 0; > - int start = -1, end = 0, tuning_value = -1, range = 0; > - u16 clock_setting; > - struct mmc_host *mmc = host->mmc; > - > - clock_setting = sdhci_readw(host, SDHCI_CLK_DELAY_SETTING); > - clock_setting &= ~0x3fff; > - > -retry: > - phase = 0; > - tuned_phase_cnt = 0; > - do { > - sdhci_writel(host, > - clock_setting | phase, > - SDHCI_CLK_DELAY_SETTING); > - > - if (!mmc_send_tuning(mmc, opcode, NULL)) { > - /* Tuning is successful at this tuning point */ > - tuned_phase_cnt++; > - dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n", > - mmc_hostname(mmc), phase); > - if (start == -1) > - start = phase; > - end = phase; > - range++; > - if (phase == (SIRF_TUNING_COUNT - 1) > - && range > longest_range) > - tuning_value = (start + end) / 2; > - } else { > - dev_dbg(mmc_dev(mmc), "%s: Found bad phase = %d\n", > - mmc_hostname(mmc), phase); > - if (range > longest_range) { > - tuning_value = (start + end) / 2; > - longest_range = range; > - } > - start = -1; > - end = range = 0; > - } > - } while (++phase < SIRF_TUNING_COUNT); > - > - if (tuned_phase_cnt && tuning_value > 0) { > - /* > - * Finally set the selected phase in delay > - * line hw block. > - */ > - phase = tuning_value; > - sdhci_writel(host, > - clock_setting | phase, > - SDHCI_CLK_DELAY_SETTING); > - > - dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", > - mmc_hostname(mmc), phase); > - } else { > - if (--tuning_seq_cnt) > - goto retry; > - /* Tuning failed */ > - dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n", > - mmc_hostname(mmc)); > - rc = -EIO; > - } > - > - return rc; > -} > - > -static const struct sdhci_ops sdhci_sirf_ops = { > - .read_l = sdhci_sirf_readl_le, > - .read_w = sdhci_sirf_readw_le, > - .platform_execute_tuning = sdhci_sirf_execute_tuning, > - .set_clock = sdhci_set_clock, > - .get_max_clock = sdhci_pltfm_clk_get_max_clock, > - .set_bus_width = sdhci_sirf_set_bus_width, > - .reset = sdhci_reset, > - .set_uhs_signaling = sdhci_set_uhs_signaling, > -}; > - > -static const struct sdhci_pltfm_data sdhci_sirf_pdata = { > - .ops = &sdhci_sirf_ops, > - .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | > - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | > - SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | > - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, > - .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > -}; > - > -static int sdhci_sirf_probe(struct platform_device *pdev) > -{ > - struct sdhci_host *host; > - struct sdhci_pltfm_host *pltfm_host; > - struct clk *clk; > - int ret; > - > - clk = devm_clk_get(&pdev->dev, NULL); > - if (IS_ERR(clk)) { > - dev_err(&pdev->dev, "unable to get clock"); > - return PTR_ERR(clk); > - } > - > - host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, 0); > - if (IS_ERR(host)) > - return PTR_ERR(host); > - > - pltfm_host = sdhci_priv(host); > - pltfm_host->clk = clk; > - > - sdhci_get_of_property(pdev); > - > - ret = clk_prepare_enable(pltfm_host->clk); > - if (ret) > - goto err_clk_prepare; > - > - ret = sdhci_add_host(host); > - if (ret) > - goto err_sdhci_add; > - > - /* > - * We must request the IRQ after sdhci_add_host(), as the tasklet only > - * gets setup in sdhci_add_host() and we oops. > - */ > - ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); > - if (ret == -EPROBE_DEFER) > - goto err_request_cd; > - if (!ret) > - mmc_gpiod_request_cd_irq(host->mmc); > - > - return 0; > - > -err_request_cd: > - sdhci_remove_host(host, 0); > -err_sdhci_add: > - clk_disable_unprepare(pltfm_host->clk); > -err_clk_prepare: > - sdhci_pltfm_free(pdev); > - return ret; > -} > - > -static const struct of_device_id sdhci_sirf_of_match[] = { > - { .compatible = "sirf,prima2-sdhc" }, > - { } > -}; > -MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match); > - > -static struct platform_driver sdhci_sirf_driver = { > - .driver = { > - .name = "sdhci-sirf", > - .probe_type = PROBE_PREFER_ASYNCHRONOUS, > - .of_match_table = sdhci_sirf_of_match, > - .pm = &sdhci_pltfm_pmops, > - }, > - .probe = sdhci_sirf_probe, > - .remove = sdhci_pltfm_unregister, > -}; > - > -module_platform_driver(sdhci_sirf_driver); > - > -MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco"); > -MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); > -MODULE_LICENSE("GPL v2"); > -- > 2.29.2 >
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt deleted file mode 100644 index dd6ed464bcb8..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt +++ /dev/null @@ -1,18 +0,0 @@ -* SiRFprimII/marco/atlas6 SDHCI Controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-sirf driver. - -Required properties: -- compatible: sirf,prima2-sdhc - -Optional properties: -- cd-gpios: card detect gpio, with zero flags. - -Example: - - sd0: sdhci@56000000 { - compatible = "sirf,prima2-sdhc"; - reg = <0xcd000000 0x100000>; - cd-gpios = <&gpio 6 0>; - }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 255d37e8bd3a..b67f6028b6f3 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -312,18 +312,6 @@ config MMC_SDHCI_S3C If unsure, say N. -config MMC_SDHCI_SIRF - tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs" - depends on ARCH_SIRF || COMPILE_TEST - depends on MMC_SDHCI_PLTFM - select MMC_SDHCI_IO_ACCESSORS - help - This selects the SDHCI support for SiRF System-on-Chip devices. - - If you have a controller with this interface, say Y or M here. - - If unsure, say N. - config MMC_SDHCI_PXAV3 tristate "Marvell MMP2 SD Host Controller support (PXAV3)" depends on CLKDEV_LOOKUP diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 43136d382d5f..d2ec428cc808 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o -obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o obj-$(CONFIG_MMC_SDHCI_MILBEAUT) += sdhci-milbeaut.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c deleted file mode 100644 index e9b347b3af7e..000000000000 --- a/drivers/mmc/host/sdhci-sirf.c +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * SDHCI support for SiRF primaII and marco SoCs - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/mmc/host.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/mmc/slot-gpio.h> -#include "sdhci-pltfm.h" - -#define SDHCI_CLK_DELAY_SETTING 0x4C -#define SDHCI_SIRF_8BITBUS BIT(3) -#define SIRF_TUNING_COUNT 16384 - -static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width) -{ - u8 ctrl; - - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); - ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS); - - /* - * CSR atlas7 and prima2 SD host version is not 3.0 - * 8bit-width enable bit of CSR SD hosts is 3, - * while stardard hosts use bit 5 - */ - if (width == MMC_BUS_WIDTH_8) - ctrl |= SDHCI_SIRF_8BITBUS; - else if (width == MMC_BUS_WIDTH_4) - ctrl |= SDHCI_CTRL_4BITBUS; - - sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); -} - -static u32 sdhci_sirf_readl_le(struct sdhci_host *host, int reg) -{ - u32 val = readl(host->ioaddr + reg); - - if (unlikely((reg == SDHCI_CAPABILITIES_1) && - (host->mmc->caps & MMC_CAP_UHS_SDR50))) { - /* fake CAP_1 register */ - val = SDHCI_SUPPORT_DDR50 | - SDHCI_SUPPORT_SDR50 | SDHCI_USE_SDR50_TUNING; - } - - if (unlikely(reg == SDHCI_SLOT_INT_STATUS)) { - u32 prss = val; - /* fake chips as V3.0 host conreoller */ - prss &= ~(0xFF << 16); - val = prss | (SDHCI_SPEC_300 << 16); - } - return val; -} - -static u16 sdhci_sirf_readw_le(struct sdhci_host *host, int reg) -{ - u16 ret = 0; - - ret = readw(host->ioaddr + reg); - - if (unlikely(reg == SDHCI_HOST_VERSION)) { - ret = readw(host->ioaddr + SDHCI_HOST_VERSION); - ret |= SDHCI_SPEC_300; - } - - return ret; -} - -static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode) -{ - int tuning_seq_cnt = 3; - int phase; - u8 tuned_phase_cnt = 0; - int rc = 0, longest_range = 0; - int start = -1, end = 0, tuning_value = -1, range = 0; - u16 clock_setting; - struct mmc_host *mmc = host->mmc; - - clock_setting = sdhci_readw(host, SDHCI_CLK_DELAY_SETTING); - clock_setting &= ~0x3fff; - -retry: - phase = 0; - tuned_phase_cnt = 0; - do { - sdhci_writel(host, - clock_setting | phase, - SDHCI_CLK_DELAY_SETTING); - - if (!mmc_send_tuning(mmc, opcode, NULL)) { - /* Tuning is successful at this tuning point */ - tuned_phase_cnt++; - dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n", - mmc_hostname(mmc), phase); - if (start == -1) - start = phase; - end = phase; - range++; - if (phase == (SIRF_TUNING_COUNT - 1) - && range > longest_range) - tuning_value = (start + end) / 2; - } else { - dev_dbg(mmc_dev(mmc), "%s: Found bad phase = %d\n", - mmc_hostname(mmc), phase); - if (range > longest_range) { - tuning_value = (start + end) / 2; - longest_range = range; - } - start = -1; - end = range = 0; - } - } while (++phase < SIRF_TUNING_COUNT); - - if (tuned_phase_cnt && tuning_value > 0) { - /* - * Finally set the selected phase in delay - * line hw block. - */ - phase = tuning_value; - sdhci_writel(host, - clock_setting | phase, - SDHCI_CLK_DELAY_SETTING); - - dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", - mmc_hostname(mmc), phase); - } else { - if (--tuning_seq_cnt) - goto retry; - /* Tuning failed */ - dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n", - mmc_hostname(mmc)); - rc = -EIO; - } - - return rc; -} - -static const struct sdhci_ops sdhci_sirf_ops = { - .read_l = sdhci_sirf_readl_le, - .read_w = sdhci_sirf_readw_le, - .platform_execute_tuning = sdhci_sirf_execute_tuning, - .set_clock = sdhci_set_clock, - .get_max_clock = sdhci_pltfm_clk_get_max_clock, - .set_bus_width = sdhci_sirf_set_bus_width, - .reset = sdhci_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, -}; - -static const struct sdhci_pltfm_data sdhci_sirf_pdata = { - .ops = &sdhci_sirf_ops, - .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | - SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, - .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, -}; - -static int sdhci_sirf_probe(struct platform_device *pdev) -{ - struct sdhci_host *host; - struct sdhci_pltfm_host *pltfm_host; - struct clk *clk; - int ret; - - clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "unable to get clock"); - return PTR_ERR(clk); - } - - host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, 0); - if (IS_ERR(host)) - return PTR_ERR(host); - - pltfm_host = sdhci_priv(host); - pltfm_host->clk = clk; - - sdhci_get_of_property(pdev); - - ret = clk_prepare_enable(pltfm_host->clk); - if (ret) - goto err_clk_prepare; - - ret = sdhci_add_host(host); - if (ret) - goto err_sdhci_add; - - /* - * We must request the IRQ after sdhci_add_host(), as the tasklet only - * gets setup in sdhci_add_host() and we oops. - */ - ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); - if (ret == -EPROBE_DEFER) - goto err_request_cd; - if (!ret) - mmc_gpiod_request_cd_irq(host->mmc); - - return 0; - -err_request_cd: - sdhci_remove_host(host, 0); -err_sdhci_add: - clk_disable_unprepare(pltfm_host->clk); -err_clk_prepare: - sdhci_pltfm_free(pdev); - return ret; -} - -static const struct of_device_id sdhci_sirf_of_match[] = { - { .compatible = "sirf,prima2-sdhc" }, - { } -}; -MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match); - -static struct platform_driver sdhci_sirf_driver = { - .driver = { - .name = "sdhci-sirf", - .probe_type = PROBE_PREFER_ASYNCHRONOUS, - .of_match_table = sdhci_sirf_of_match, - .pm = &sdhci_pltfm_pmops, - }, - .probe = sdhci_sirf_probe, - .remove = sdhci_pltfm_unregister, -}; - -module_platform_driver(sdhci_sirf_driver); - -MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco"); -MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); -MODULE_LICENSE("GPL v2");