| Message ID | 20210420134641.57343-3-avri.altman@wdc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Do not flush cache when it is disabled | expand |
On Tue, 20 Apr 2021 at 15:46, Avri Altman <avri.altman@wdc.com> wrote: > > The cache function can be turned ON and OFF by writing to the CACHE_CTRL > byte (EXT_CSD byte [33]). However, card->ext_csd.cache_ctrl is only > set on init if cache size > 0. > > Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write. > > Signed-off-by: Avri Altman <avri.altman@wdc.com> > Acked-by: Adrian Hunter <adrian.hunter@intel.com> This can go separate from patch 1, so I have applied this for next and by adding a stable tag to it. Thanks and kind regards Uffe > --- > drivers/mmc/core/block.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c > index 24e1ecbdd510..7e70f11e85e2 100644 > --- a/drivers/mmc/core/block.c > +++ b/drivers/mmc/core/block.c > @@ -572,6 +572,18 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, > main_md->part_curr = value & EXT_CSD_PART_CONFIG_ACC_MASK; > } > > + /* > + * Make sure to update CACHE_CTRL in case it was changed. The cache > + * will get turned back on if the card is re-initialized, e.g. > + * suspend/resume or hw reset in recovery. > + */ > + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_CACHE_CTRL) && > + (cmd.opcode == MMC_SWITCH)) { > + u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg) & 1; > + > + card->ext_csd.cache_ctrl = value; > + } > + > /* > * According to the SD specs, some commands require a delay after > * issuing the command. > -- > 2.25.1 >
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 24e1ecbdd510..7e70f11e85e2 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -572,6 +572,18 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, main_md->part_curr = value & EXT_CSD_PART_CONFIG_ACC_MASK; } + /* + * Make sure to update CACHE_CTRL in case it was changed. The cache + * will get turned back on if the card is re-initialized, e.g. + * suspend/resume or hw reset in recovery. + */ + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_CACHE_CTRL) && + (cmd.opcode == MMC_SWITCH)) { + u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg) & 1; + + card->ext_csd.cache_ctrl = value; + } + /* * According to the SD specs, some commands require a delay after * issuing the command.