[04/11] mmc: core: Extend re-use of __mmc_poll_for_busy()

Message ID	20210504161222.101536-5-ulf.hansson@linaro.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-mmc-owner@kernel.org> From: Ulf Hansson <ulf.hansson@linaro.org> To: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>, Adrian Hunter <adrian.hunter@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org>, Wolfram Sang <wsa+renesas@sang-engineering.com>, Shawn Lin <shawn.lin@rock-chips.com>, Avri Altman <avri.altman@wdc.com>, Masami Hiramatsu <masami.hiramatsu@linaro.org>, linux-block@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 04/11] mmc: core: Extend re-use of __mmc_poll_for_busy() Date: Tue, 4 May 2021 18:12:15 +0200 Message-Id: <20210504161222.101536-5-ulf.hansson@linaro.org> In-Reply-To: <20210504161222.101536-1-ulf.hansson@linaro.org> References: <20210504161222.101536-1-ulf.hansson@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	Initital support for new power/perf features for SD cards \| expand [00/11] Initital support for new power/perf features for SD cards [01/11] mmc: core: Drop open coding when preparing commands with busy signaling [02/11] mmc: core: Take into account MMC_CAP_NEED_RSP_BUSY for eMMC HPI commands [03/11] mmc: core: Re-structure some code in __mmc_poll_for_busy() [04/11] mmc: core: Extend re-use of __mmc_poll_for_busy() [05/11] mmc: core: Enable eMMC sleep commands to use HW busy polling [06/11] mmc: core: Prepare mmc_send_cxd_data() to be re-used for additional cmds [07/11] mmc: core: Drop open coding in mmc_sd_switch() [08/11] mmc: core: Parse the SD SCR register for support of CMD48/49 and CMD58/59 [09/11] mmc: core: Read the SD function extension registers for power management [10/11] mmc: core: Read performance enhancements registers for SD cards [11/11] mmc: core: Add support for Power Off Notification for SD cards

Message ID

20210504161222.101536-5-ulf.hansson@linaro.org (mailing list archive)

State

New, archived

Headers

From: Ulf Hansson <ulf.hansson@linaro.org>
To: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>,
        Adrian Hunter <adrian.hunter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
        Wolfram Sang <wsa+renesas@sang-engineering.com>,
        Shawn Lin <shawn.lin@rock-chips.com>,
        Avri Altman <avri.altman@wdc.com>,
        Masami Hiramatsu <masami.hiramatsu@linaro.org>,
        linux-block@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 04/11] mmc: core: Extend re-use of __mmc_poll_for_busy()
Date: Tue,  4 May 2021 18:12:15 +0200
Message-Id: <20210504161222.101536-5-ulf.hansson@linaro.org>
In-Reply-To: <20210504161222.101536-1-ulf.hansson@linaro.org>
References: <20210504161222.101536-1-ulf.hansson@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Series

Initital support for new power/perf features for SD cards | expand

Commit Message

Ulf Hansson May 4, 2021, 4:12 p.m. UTC

Via __mmc_poll_for_busy() we end up polling with the ->card_busy() host ops
or by sending the CMD13. To allow polling of different types, which is
needed to support a few new SD card features, let's rework the code around
__mmc_poll_for_busy() to make it more generic.

More precisely, let __mmc_poll_for_busy() take a pointer to a callback
function as in-parameter, which it calls to poll for busy state completion.
Additionally, let's share __mmc_poll_for_busy() to allow it to be re-used
outside of mmc_ops.c. Subsequent changes will make use of it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/core.c    |  2 +-
 drivers/mmc/core/mmc_ops.c | 42 ++++++++++++++++++++++++--------------
 drivers/mmc/core/mmc_ops.h |  5 ++++-
 3 files changed, 32 insertions(+), 17 deletions(-)

Comments

Linus Walleij May 6, 2021, 12:53 p.m. UTC | #1

On Tue, May 4, 2021 at 6:12 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:

> Via __mmc_poll_for_busy() we end up polling with the ->card_busy() host ops
> or by sending the CMD13. To allow polling of different types, which is
> needed to support a few new SD card features, let's rework the code around
> __mmc_poll_for_busy() to make it more generic.
>
> More precisely, let __mmc_poll_for_busy() take a pointer to a callback
> function as in-parameter, which it calls to poll for busy state completion.
> Additionally, let's share __mmc_poll_for_busy() to allow it to be re-used
> outside of mmc_ops.c. Subsequent changes will make use of it.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Shawn Lin May 7, 2021, 1:51 a.m. UTC | #2

On 2021/5/5 0:12, Ulf Hansson wrote:
> Via __mmc_poll_for_busy() we end up polling with the ->card_busy() host ops
> or by sending the CMD13. To allow polling of different types, which is
> needed to support a few new SD card features, let's rework the code around
> __mmc_poll_for_busy() to make it more generic.
> 
> More precisely, let __mmc_poll_for_busy() take a pointer to a callback
> function as in-parameter, which it calls to poll for busy state completion.
> Additionally, let's share __mmc_poll_for_busy() to allow it to be re-used
> outside of mmc_ops.c. Subsequent changes will make use of it.
> 

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
>   drivers/mmc/core/core.c    |  2 +-
>   drivers/mmc/core/mmc_ops.c | 42 ++++++++++++++++++++++++--------------
>   drivers/mmc/core/mmc_ops.h |  5 ++++-
>   3 files changed, 32 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index b00c84ea8441..b039dcff17f8 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -1671,7 +1671,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
>   		goto out;
>   
>   	/* Let's poll to find out when the erase operation completes. */
> -	err = mmc_poll_for_busy(card, busy_timeout, MMC_BUSY_ERASE);
> +	err = mmc_poll_for_busy(card, busy_timeout, false, MMC_BUSY_ERASE);
>   
>   out:
>   	mmc_retune_release(card->host);
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index ccaee1cb7ff5..653627fe02a3 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -53,6 +53,12 @@ static const u8 tuning_blk_pattern_8bit[] = {
>   	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
>   };
>   
> +struct mmc_busy_data {
> +	struct mmc_card *card;
> +	bool retry_crc_err;
> +	enum mmc_busy_cmd busy_cmd;
> +};
> +
>   int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries)
>   {
>   	int err;
> @@ -424,10 +430,10 @@ int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal)
>   	return mmc_switch_status_error(card->host, status);
>   }
>   
> -static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
> -			   enum mmc_busy_cmd busy_cmd, bool *busy)
> +static int mmc_busy_cb(void *cb_data, bool *busy)
>   {
> -	struct mmc_host *host = card->host;
> +	struct mmc_busy_data *data = cb_data;
> +	struct mmc_host *host = data->card->host;
>   	u32 status = 0;
>   	int err;
>   
> @@ -436,17 +442,17 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
>   		return 0;
>   	}
>   
> -	err = mmc_send_status(card, &status);
> -	if (retry_crc_err && err == -EILSEQ) {
> +	err = mmc_send_status(data->card, &status);
> +	if (data->retry_crc_err && err == -EILSEQ) {
>   		*busy = true;
>   		return 0;
>   	}
>   	if (err)
>   		return err;
>   
> -	switch (busy_cmd) {
> +	switch (data->busy_cmd) {
>   	case MMC_BUSY_CMD6:
> -		err = mmc_switch_status_error(card->host, status);
> +		err = mmc_switch_status_error(host, status);
>   		break;
>   	case MMC_BUSY_ERASE:
>   		err = R1_STATUS(status) ? -EIO : 0;
> @@ -464,8 +470,9 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
>   	return 0;
>   }
>   
> -static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
> -			       bool retry_crc_err, enum mmc_busy_cmd busy_cmd)
> +int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
> +			int (*busy_cb)(void *cb_data, bool *busy),
> +			void *cb_data)
>   {
>   	struct mmc_host *host = card->host;
>   	int err;
> @@ -482,7 +489,7 @@ static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
>   		 */
>   		expired = time_after(jiffies, timeout);
>   
> -		err = mmc_busy_status(card, retry_crc_err, busy_cmd, &busy);
> +		err = (*busy_cb)(cb_data, &busy);
>   		if (err)
>   			return err;
>   
> @@ -505,9 +512,15 @@ static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
>   }
>   
>   int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
> -		      enum mmc_busy_cmd busy_cmd)
> +		      bool retry_crc_err, enum mmc_busy_cmd busy_cmd)
>   {
> -	return __mmc_poll_for_busy(card, timeout_ms, false, busy_cmd);
> +	struct mmc_busy_data cb_data;
> +
> +	cb_data.card = card;
> +	cb_data.retry_crc_err = retry_crc_err;
> +	cb_data.busy_cmd = busy_cmd;
> +
> +	return __mmc_poll_for_busy(card, timeout_ms, &mmc_busy_cb, &cb_data);
>   }
>   
>   bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
> @@ -591,8 +604,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>   	}
>   
>   	/* Let's try to poll to find out when the command is completed. */
> -	err = __mmc_poll_for_busy(card, timeout_ms, retry_crc_err,
> -				  MMC_BUSY_CMD6);
> +	err = mmc_poll_for_busy(card, timeout_ms, retry_crc_err, MMC_BUSY_CMD6);
>   	if (err)
>   		goto out;
>   
> @@ -840,7 +852,7 @@ static int mmc_send_hpi_cmd(struct mmc_card *card)
>   		return 0;
>   
>   	/* Let's poll to find out when the HPI request completes. */
> -	return mmc_poll_for_busy(card, busy_timeout_ms, MMC_BUSY_HPI);
> +	return mmc_poll_for_busy(card, busy_timeout_ms, false, MMC_BUSY_HPI);
>   }
>   
>   /**
> diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> index ba898c435658..aca66c128804 100644
> --- a/drivers/mmc/core/mmc_ops.h
> +++ b/drivers/mmc/core/mmc_ops.h
> @@ -38,8 +38,11 @@ int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
>   int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
>   bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
>   			  unsigned int timeout_ms);
> +int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
> +			int (*busy_cb)(void *cb_data, bool *busy),
> +			void *cb_data);
>   int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
> -		      enum mmc_busy_cmd busy_cmd);
> +		      bool retry_crc_err, enum mmc_busy_cmd busy_cmd);
>   int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
>   		unsigned int timeout_ms, unsigned char timing,
>   		bool send_status, bool retry_crc_err, unsigned int retries);
>

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index b00c84ea8441..b039dcff17f8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1671,7 +1671,7 @@  static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 		goto out;
 
 	/* Let's poll to find out when the erase operation completes. */
-	err = mmc_poll_for_busy(card, busy_timeout, MMC_BUSY_ERASE);
+	err = mmc_poll_for_busy(card, busy_timeout, false, MMC_BUSY_ERASE);
 
 out:
 	mmc_retune_release(card->host);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index ccaee1cb7ff5..653627fe02a3 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -53,6 +53,12 @@  static const u8 tuning_blk_pattern_8bit[] = {
 	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
 };
 
+struct mmc_busy_data {
+	struct mmc_card *card;
+	bool retry_crc_err;
+	enum mmc_busy_cmd busy_cmd;
+};
+
 int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries)
 {
 	int err;
@@ -424,10 +430,10 @@  int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal)
 	return mmc_switch_status_error(card->host, status);
 }
 
-static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
-			   enum mmc_busy_cmd busy_cmd, bool *busy)
+static int mmc_busy_cb(void *cb_data, bool *busy)
 {
-	struct mmc_host *host = card->host;
+	struct mmc_busy_data *data = cb_data;
+	struct mmc_host *host = data->card->host;
 	u32 status = 0;
 	int err;
 
@@ -436,17 +442,17 @@  static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
 		return 0;
 	}
 
-	err = mmc_send_status(card, &status);
-	if (retry_crc_err && err == -EILSEQ) {
+	err = mmc_send_status(data->card, &status);
+	if (data->retry_crc_err && err == -EILSEQ) {
 		*busy = true;
 		return 0;
 	}
 	if (err)
 		return err;
 
-	switch (busy_cmd) {
+	switch (data->busy_cmd) {
 	case MMC_BUSY_CMD6:
-		err = mmc_switch_status_error(card->host, status);
+		err = mmc_switch_status_error(host, status);
 		break;
 	case MMC_BUSY_ERASE:
 		err = R1_STATUS(status) ? -EIO : 0;
@@ -464,8 +470,9 @@  static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
 	return 0;
 }
 
-static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
-			       bool retry_crc_err, enum mmc_busy_cmd busy_cmd)
+int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+			int (*busy_cb)(void *cb_data, bool *busy),
+			void *cb_data)
 {
 	struct mmc_host *host = card->host;
 	int err;
@@ -482,7 +489,7 @@  static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
 		 */
 		expired = time_after(jiffies, timeout);
 
-		err = mmc_busy_status(card, retry_crc_err, busy_cmd, &busy);
+		err = (*busy_cb)(cb_data, &busy);
 		if (err)
 			return err;
 
@@ -505,9 +512,15 @@  static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
 }
 
 int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
-		      enum mmc_busy_cmd busy_cmd)
+		      bool retry_crc_err, enum mmc_busy_cmd busy_cmd)
 {
-	return __mmc_poll_for_busy(card, timeout_ms, false, busy_cmd);
+	struct mmc_busy_data cb_data;
+
+	cb_data.card = card;
+	cb_data.retry_crc_err = retry_crc_err;
+	cb_data.busy_cmd = busy_cmd;
+
+	return __mmc_poll_for_busy(card, timeout_ms, &mmc_busy_cb, &cb_data);
 }
 
 bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
@@ -591,8 +604,7 @@  int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 	}
 
 	/* Let's try to poll to find out when the command is completed. */
-	err = __mmc_poll_for_busy(card, timeout_ms, retry_crc_err,
-				  MMC_BUSY_CMD6);
+	err = mmc_poll_for_busy(card, timeout_ms, retry_crc_err, MMC_BUSY_CMD6);
 	if (err)
 		goto out;
 
@@ -840,7 +852,7 @@  static int mmc_send_hpi_cmd(struct mmc_card *card)
 		return 0;
 
 	/* Let's poll to find out when the HPI request completes. */
-	return mmc_poll_for_busy(card, busy_timeout_ms, MMC_BUSY_HPI);
+	return mmc_poll_for_busy(card, busy_timeout_ms, false, MMC_BUSY_HPI);
 }
 
 /**
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index ba898c435658..aca66c128804 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -38,8 +38,11 @@  int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
 int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
 bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
 			  unsigned int timeout_ms);
+int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+			int (*busy_cb)(void *cb_data, bool *busy),
+			void *cb_data);
 int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
-		      enum mmc_busy_cmd busy_cmd);
+		      bool retry_crc_err, enum mmc_busy_cmd busy_cmd);
 int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		unsigned int timeout_ms, unsigned char timing,
 		bool send_status, bool retry_crc_err, unsigned int retries);

[04/11] mmc: core: Extend re-use of __mmc_poll_for_busy()

Commit Message

Comments

Patch