Message ID | 20220807205630.251939-1-limings@nvidia.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] mmc: sdhci-of-dwcmshc: add ACPI match data for BlueField-3 SoC | expand |
On 7/08/22 23:56, Liming Sun wrote: > Commit 08f3dff799d43 introduces the of_device_get_match_data() > checking for some chip but breaks the BlueField-3 firmware which > uses ACPI instead. This commit adds the ACPI match data and > quirks/quirks2 to re-enable the support of BlueField-3 SoC. > > Reviewed-by: David Woods <davwoods@nvidia.com> > Signed-off-by: Liming Sun <limings@nvidia.com> Please re-base this patch because it does not apply to latest mmc "next" branch. > --- > v1->v2: > Fixes an acpi warning > Reported-by: kernel test robot <lkp@intel.com> > v1: Initial version. > --- > drivers/mmc/host/sdhci-of-dwcmshc.c | 16 ++++++++++++++-- > 1 file changed, 14 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c > index bac874ab0b33..a0c73ddaaaa4 100644 > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > @@ -279,6 +279,15 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { > .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > }; > > +#ifdef CONFIG_ACPI > +static const struct sdhci_pltfm_data sdhci_dwcmshc_bf3_pdata = { > + .ops = &sdhci_dwcmshc_ops, > + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | > + SDHCI_QUIRK2_ACMD23_BROKEN, > +}; > +#endif > + > static const struct sdhci_pltfm_data sdhci_dwcmshc_rk3568_pdata = { > .ops = &sdhci_dwcmshc_rk3568_ops, > .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | > @@ -336,7 +345,10 @@ MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids); > > #ifdef CONFIG_ACPI > static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = { > - { .id = "MLNXBF30" }, > + { > + .id = "MLNXBF30", > + .driver_data = (kernel_ulong_t)&sdhci_dwcmshc_bf3_pdata, > + }, > {} > }; > #endif > @@ -352,7 +364,7 @@ static int dwcmshc_probe(struct platform_device *pdev) > int err; > u32 extra; > > - pltfm_data = of_device_get_match_data(&pdev->dev); > + pltfm_data = device_get_match_data(&pdev->dev); > if (!pltfm_data) { > dev_err(&pdev->dev, "Error: No device match data found\n"); > return -ENODEV;
Thanks. Done and rebased to mmc 'next' in patch v3. > -----Original Message----- > From: Adrian Hunter <adrian.hunter@intel.com> > Sent: Monday, August 8, 2022 4:26 AM > To: Liming Sun <limings@nvidia.com>; Ulf Hansson <ulf.hansson@linaro.org>; > David Woods <davwoods@nvidia.com>; Shawn Lin <shawn.lin@rock- > chips.com> > Cc: linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v2] mmc: sdhci-of-dwcmshc: add ACPI match data for > BlueField-3 SoC > > On 7/08/22 23:56, Liming Sun wrote: > > Commit 08f3dff799d43 introduces the of_device_get_match_data() > > checking for some chip but breaks the BlueField-3 firmware which > > uses ACPI instead. This commit adds the ACPI match data and > > quirks/quirks2 to re-enable the support of BlueField-3 SoC. > > > > Reviewed-by: David Woods <davwoods@nvidia.com> > > Signed-off-by: Liming Sun <limings@nvidia.com> > > Please re-base this patch because it does not apply to > latest mmc "next" branch. > > > --- > > v1->v2: > > Fixes an acpi warning > > Reported-by: kernel test robot <lkp@intel.com> > > v1: Initial version. > > --- > > drivers/mmc/host/sdhci-of-dwcmshc.c | 16 ++++++++++++++-- > > 1 file changed, 14 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c > b/drivers/mmc/host/sdhci-of-dwcmshc.c > > index bac874ab0b33..a0c73ddaaaa4 100644 > > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c > > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c > > @@ -279,6 +279,15 @@ static const struct sdhci_pltfm_data > sdhci_dwcmshc_pdata = { > > .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, > > }; > > > > +#ifdef CONFIG_ACPI > > +static const struct sdhci_pltfm_data sdhci_dwcmshc_bf3_pdata = { > > + .ops = &sdhci_dwcmshc_ops, > > + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, > > + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | > > + SDHCI_QUIRK2_ACMD23_BROKEN, > > +}; > > +#endif > > + > > static const struct sdhci_pltfm_data sdhci_dwcmshc_rk3568_pdata = { > > .ops = &sdhci_dwcmshc_rk3568_ops, > > .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | > > @@ -336,7 +345,10 @@ MODULE_DEVICE_TABLE(of, > sdhci_dwcmshc_dt_ids); > > > > #ifdef CONFIG_ACPI > > static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = { > > - { .id = "MLNXBF30" }, > > + { > > + .id = "MLNXBF30", > > + .driver_data = (kernel_ulong_t)&sdhci_dwcmshc_bf3_pdata, > > + }, > > {} > > }; > > #endif > > @@ -352,7 +364,7 @@ static int dwcmshc_probe(struct platform_device > *pdev) > > int err; > > u32 extra; > > > > - pltfm_data = of_device_get_match_data(&pdev->dev); > > + pltfm_data = device_get_match_data(&pdev->dev); > > if (!pltfm_data) { > > dev_err(&pdev->dev, "Error: No device match data found\n"); > > return -ENODEV;
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index bac874ab0b33..a0c73ddaaaa4 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -279,6 +279,15 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = { .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, }; +#ifdef CONFIG_ACPI +static const struct sdhci_pltfm_data sdhci_dwcmshc_bf3_pdata = { + .ops = &sdhci_dwcmshc_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_ACMD23_BROKEN, +}; +#endif + static const struct sdhci_pltfm_data sdhci_dwcmshc_rk3568_pdata = { .ops = &sdhci_dwcmshc_rk3568_ops, .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | @@ -336,7 +345,10 @@ MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids); #ifdef CONFIG_ACPI static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = { - { .id = "MLNXBF30" }, + { + .id = "MLNXBF30", + .driver_data = (kernel_ulong_t)&sdhci_dwcmshc_bf3_pdata, + }, {} }; #endif @@ -352,7 +364,7 @@ static int dwcmshc_probe(struct platform_device *pdev) int err; u32 extra; - pltfm_data = of_device_get_match_data(&pdev->dev); + pltfm_data = device_get_match_data(&pdev->dev); if (!pltfm_data) { dev_err(&pdev->dev, "Error: No device match data found\n"); return -ENODEV;