Message ID | 20221019110647.11076-20-victor.shih@genesyslogic.com.tw (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add support UHS-II for GL9755 | expand |
On 19/10/22 14:06, Victor Shih wrote: > This is a sdhci version of mmc's request operation. > It covers both UHS-I and UHS-II. > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > --- > drivers/mmc/host/sdhci-uhs2.c | 475 ++++++++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci.c | 91 ++++--- > drivers/mmc/host/sdhci.h | 17 ++ > 3 files changed, 550 insertions(+), 33 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > index c9d59b8ac37f..41b089ccc200 100644 > --- a/drivers/mmc/host/sdhci-uhs2.c > +++ b/drivers/mmc/host/sdhci-uhs2.c > @@ -13,6 +13,7 @@ > #include <linux/delay.h> > #include <linux/ktime.h> > #include <linux/module.h> > +#include <linux/mmc/mmc.h> > > #include "sdhci.h" > #include "sdhci-uhs2.h" > @@ -537,6 +538,479 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) > return err; > } > > +/*****************************************************************************\ > + * * > + * Core functions * > + * * > +\*****************************************************************************/ > + > +static void sdhci_uhs2_prepare_data(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > + struct mmc_data *data = cmd->data; > + > + sdhci_initialize_data(host, data); > + > + sdhci_prepare_dma(host, data); > + > + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE); > + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT); > +} > + > +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) > +static void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > + if (!sdhci_external_dma_setup(host, cmd)) { > + __sdhci_external_dma_prepare_data(host, cmd); > + } else { > + sdhci_external_dma_release(host); > + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n", > + mmc_hostname(host->mmc)); > + sdhci_uhs2_prepare_data(host, cmd); > + } > +} > +#else > +static inline void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > + /* This should never happen */ > + WARN_ON_ONCE(1); > +} > + > +static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > +} > +#endif /* CONFIG_MMC_SDHCI_EXTERNAL_DMA */ Let's skip external DMA support to start with. > + > +static void sdhci_uhs2_finish_data(struct sdhci_host *host) > +{ > + struct mmc_data *data = host->data; > + > + __sdhci_finish_data_common(host); > + > + /* > + * FIXME: Is this condition needed? > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) > + */ No > + __sdhci_finish_mrq(host, data->mrq); > +} > + > +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > + u16 mode; > + struct mmc_data *data = cmd->data; > + u16 arg; > + > + if (!data) { > + /* clear Auto CMD settings for no data CMDs */ > + arg = cmd->uhs2_cmd->arg; > + if ((((arg & 0xF) << 8) | ((arg >> 8) & 0xFF)) == Please don't open code byte-swapping This should be an inline function so it can be used again further below: #define UHS2_ARG_IOADR_MASK 0xfff static inline u16 uhs2_dev_cmd(struct mmc_command *cmd) { return be16_to_cpu((__be16)cmd->uhs2_cmd->arg) & UHS2_ARG_IOADR_MASK; } > + UHS2_DEV_CMD_TRANS_ABORT) { Please wrap at 100 columns instead of 80, here and elsewhere. > + mode = 0; > + } else { > + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE); > + if (cmd->opcode == MMC_STOP_TRANSMISSION || > + cmd->opcode == MMC_ERASE) > + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY; > + else > + /* send status mode */ > + if (cmd->opcode == MMC_SEND_STATUS) > + mode = 0; > + } > + > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) Please don't use CONFIG_MMC_DEBUG > + DBG("UHS2 no data trans mode is 0x%x.\n", mode); > + > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); > + return; > + } > + > + WARN_ON(!host->data); > + > + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY; > + if (data->flags & MMC_DATA_WRITE) > + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT; > + > + if (data->blocks == 1 && > + data->blksz != 512 && > + cmd->opcode != MMC_READ_SINGLE_BLOCK && > + cmd->opcode != MMC_WRITE_BLOCK) { > + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN; > + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE; > + } > + > + if (host->flags & SDHCI_REQ_USE_DMA) > + mode |= SDHCI_UHS2_TRNS_DMA; > + > + if ((host->mmc->uhs2_ios.is_2L_HD_mode) && !cmd->uhs2_tmode0_flag) > + mode |= SDHCI_UHS2_TRNS_2L_HD; > + > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); > + > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) Please don't use CONFIG_MMC_DEBUG > + DBG("UHS2 trans mode is 0x%x.\n", mode); > +} > + > +static void __sdhci_uhs2_send_command(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > + int i, j; > + int cmd_reg; > + > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { Not necessary to check MMC_UHS2_INITIALIZED here > + if (!cmd->uhs2_cmd) { > + pr_err("%s: fatal error, no uhs2_cmd!\n", > + mmc_hostname(host->mmc)); > + return; > + } > + } > + > + i = 0; > + sdhci_writel(host, > + ((u32)cmd->uhs2_cmd->arg << 16) | > + (u32)cmd->uhs2_cmd->header, > + SDHCI_UHS2_CMD_PACKET + i); > + i += 4; > + > + /* > + * Per spec, playload (config) should be MSB before sending out. > + * But we don't need convert here because had set payload as > + * MSB when preparing config read/write commands. > + */ > + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { > + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), > + SDHCI_UHS2_CMD_PACKET + i); > + i += 4; > + } > + > + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) > + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); > + > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { Please don't use CONFIG_MMC_DEBUG > + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); > + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) > + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, > + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); > + } > + > + cmd_reg = cmd->uhs2_cmd->packet_len << > + SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT; > + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) > + cmd_reg |= SDHCI_UHS2_COMMAND_DATA; > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > + cmd_reg |= SDHCI_UHS2_COMMAND_CMD12; > + > + /* UHS2 Native ABORT */ > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | > + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT)) From above, can use (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT) > + cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT; > + > + /* UHS2 Native DORMANT */ > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | > + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == > + UHS2_DEV_CMD_GO_DORMANT_STATE)) From above, can use (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE) > + cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT; > + > + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); > + > + sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND); > +} > + > +static bool sdhci_uhs2_send_command(struct sdhci_host *host, > + struct mmc_command *cmd) > +{ > + int flags; > + u32 mask; > + unsigned long timeout; > + > + WARN_ON(host->cmd); > + > + /* Initially, a command has no error */ > + cmd->error = 0; > + > + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) > + return sdhci_send_command(host, cmd); No check necessary, can remove, and please do not export sdhci_send_command(). > + > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > + cmd->flags |= MMC_RSP_BUSY; > + > + mask = SDHCI_CMD_INHIBIT; > + > + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) > + return false; > + > + host->cmd = cmd; > + host->data_timeout = 0; > + if (sdhci_data_line_cmd(cmd)) { > + WARN_ON(host->data_cmd); > + host->data_cmd = cmd; > + __sdhci_uhs2_set_timeout(host); > + } > + > + if (cmd->data) { > + if (host->use_external_dma) Let's skip external DMA support for now > + sdhci_uhs2_external_dma_prepare_data(host, cmd); > + else > + sdhci_uhs2_prepare_data(host, cmd); > + } > + > + sdhci_uhs2_set_transfer_mode(host, cmd); > + > + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { > + WARN_ONCE(1, "Unsupported response type!\n"); > + /* > + * This does not happen in practice because 136-bit response > + * commands never have busy waiting, so rather than complicate > + * the error path, just remove busy waiting and continue. > + */ > + cmd->flags &= ~MMC_RSP_BUSY; > + } > + > + if (!(cmd->flags & MMC_RSP_PRESENT)) > + flags = SDHCI_CMD_RESP_NONE; > + else if (cmd->flags & MMC_RSP_136) > + flags = SDHCI_CMD_RESP_LONG; > + else if (cmd->flags & MMC_RSP_BUSY) > + flags = SDHCI_CMD_RESP_SHORT_BUSY; > + else > + flags = SDHCI_CMD_RESP_SHORT; > + > + if (cmd->flags & MMC_RSP_CRC) > + flags |= SDHCI_CMD_CRC; > + if (cmd->flags & MMC_RSP_OPCODE) > + flags |= SDHCI_CMD_INDEX; > + > + timeout = jiffies; > + if (host->data_timeout) > + timeout += nsecs_to_jiffies(host->data_timeout); > + else if (!cmd->data && cmd->busy_timeout > 9000) > + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; > + else > + timeout += 10 * HZ; > + sdhci_mod_timer(host, cmd->mrq, timeout); > + > + if (host->use_external_dma) > + sdhci_external_dma_pre_transfer(host, cmd); > + > + __sdhci_uhs2_send_command(host, cmd); > + > + return true; > +} > + > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, > + struct mmc_command *cmd, > + unsigned long flags) > + __releases(host->lock) > + __acquires(host->lock) > +{ > + struct mmc_command *deferred_cmd = host->deferred_cmd; > + int timeout = 10; /* Approx. 10 ms */ > + bool present; > + > + while (!sdhci_uhs2_send_command(host, cmd)) { > + if (!timeout--) { > + pr_err("%s: Controller never released inhibit bit(s).\n", > + mmc_hostname(host->mmc)); > + sdhci_dumpregs(host); > + cmd->error = -EIO; > + return false; > + } > + > + spin_unlock_irqrestore(&host->lock, flags); > + > + usleep_range(1000, 1250); > + > + present = host->mmc->ops->get_cd(host->mmc); > + > + spin_lock_irqsave(&host->lock, flags); > + > + /* A deferred command might disappear, handle that */ > + if (cmd == deferred_cmd && cmd != host->deferred_cmd) > + return true; > + > + if (sdhci_present_error(host, cmd, present)) > + return false; > + } > + > + if (cmd == host->deferred_cmd) > + host->deferred_cmd = NULL; > + > + return true; > +} > + > +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) > +{ > + struct mmc_command *cmd = host->cmd; > + u8 resp; > + u8 ecode; > + bool bReadA0 = 0; > + int i; > + > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { > + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); > + if (resp & UHS2_RES_NACK_MASK) { > + ecode = (resp >> UHS2_RES_ECODE_POS) & > + UHS2_RES_ECODE_MASK; > + pr_err("%s: NACK is got, ECODE=0x%x.\n", > + mmc_hostname(host->mmc), ecode); > + } > + bReadA0 = 1; > + } > + > + if (cmd->uhs2_resp && > + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { > + /* Get whole response of some native CCMD, like > + * DEVICE_INIT, ENUMERATE. > + */ > + for (i = 0; i < cmd->uhs2_resp_len; i++) > + cmd->uhs2_resp[i] = > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); > + } else { > + /* Get SD CMD response and Payload for some read > + * CCMD, like INQUIRY_CFG. > + */ > + /* Per spec (p136), payload field is divided into > + * a unit of DWORD and transmission order within > + * a DWORD is big endian. > + */ > + if (!bReadA0) > + sdhci_readl(host, SDHCI_UHS2_RESPONSE); > + for (i = 4; i < 20; i += 4) { > + cmd->resp[i / 4 - 1] = > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i) << 24) | > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i + 1) > + << 16) | > + (sdhci_readb(host, > + SDHCI_UHS2_RESPONSE + i + 2) > + << 8) | > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); > + } > + } > +} > + > +static void sdhci_uhs2_finish_command(struct sdhci_host *host) > +{ > + struct mmc_command *cmd = host->cmd; > + > + /* FIXME: Is this check necessary? */ No > + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) { > + sdhci_finish_command(host); Please do not export sdhci_finish_command() > + return; > + } > + > + __sdhci_uhs2_finish_command(host); > + > + host->cmd = NULL; > + > + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd) > + mmc_command_done(host->mmc, cmd->mrq); > + > + /* > + * The host can send and interrupt when the busy state has > + * ended, allowing us to wait without wasting CPU cycles. > + * The busy signal uses DAT0 so this is similar to waiting > + * for data to complete. > + * > + * Note: The 1.0 specification is a bit ambiguous about this > + * feature so there might be some problems with older > + * controllers. > + */ > + if (cmd->flags & MMC_RSP_BUSY) { > + if (cmd->data) { > + DBG("Cannot wait for busy signal when also doing a data transfer"); > + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && > + cmd == host->data_cmd) { > + /* Command complete before busy is ended */ > + return; > + } > + } > + > + /* Processed actual command. */ > + if (host->data && host->data_early) > + sdhci_uhs2_finish_data(host); > + > + if (!cmd->data) > + __sdhci_finish_mrq(host, cmd->mrq); > +} > + > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_command *cmd; > + unsigned long flags; > + bool present; > + > + /* FIXME: check more flags? */ No, it's fine. > + if (!(sdhci_uhs2_mode(host))) { > + sdhci_request(mmc, mrq); > + return; > + } We need to clear the stop cmd and sbc to prevent the driver using them. mrq->stop = NULL; mrq->sbc = NULL; if (mrq->data) mrq->data->stop = NULL; > + > + /* Firstly check card presence */ > + present = mmc->ops->get_cd(mmc); > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (sdhci_present_error(host, mrq->cmd, present)) > + goto out_finish; > + > + cmd = mrq->cmd; > + > + if (!sdhci_uhs2_send_command(host, cmd)) > + goto out_finish; > + > + spin_unlock_irqrestore(&host->lock, flags); > + > + return; > + > +out_finish: > + sdhci_finish_mrq(host, mrq); > + spin_unlock_irqrestore(&host->lock, flags); > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); > + > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + struct mmc_command *cmd; > + unsigned long flags; > + int ret = 0; > + > + if (!host->mmc->flags & MMC_UHS2_SUPPORT) > + return sdhci_request_atomic(mmc, mrq); > + > + spin_lock_irqsave(&host->lock, flags); > + > + if (sdhci_present_error(host, mrq->cmd, true)) { > + sdhci_finish_mrq(host, mrq); > + goto out_finish; > + } > + > + cmd = mrq->cmd; > + > + /* > + * The HSQ may send a command in interrupt context without polling > + * the busy signaling, which means we should return BUSY if controller > + * has not released inhibit bits to allow HSQ trying to send request > + * again in non-atomic context. So we should not finish this request > + * here. > + */ > + if (!sdhci_uhs2_send_command(host, cmd)) > + ret = -EBUSY; > + > +out_finish: > + spin_unlock_irqrestore(&host->lock, flags); > + return ret; > +} > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); > + > /*****************************************************************************\ > * * > * Driver init/exit * > @@ -692,6 +1166,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) > sdhci_uhs2_start_signal_voltage_switch; > host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios; > host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; > + host->mmc_host_ops.request = sdhci_uhs2_request; > > if (!host->mmc_host_ops.uhs2_detect_init) > host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init; > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index b9db2e976010..407169468927 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -47,8 +47,6 @@ > static unsigned int debug_quirks = 0; > static unsigned int debug_quirks2; > > -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); > - > void sdhci_dumpregs(struct sdhci_host *host) > { > SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n"); > @@ -147,10 +145,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host) > } > EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode); > > -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd) > +bool sdhci_data_line_cmd(struct mmc_command *cmd) > { > return cmd->data || cmd->flags & MMC_RSP_BUSY; > } > +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd); > > static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) > { > @@ -409,7 +408,7 @@ static void sdhci_reinit(struct sdhci_host *host) > mmc_detect_change(host->mmc, msecs_to_jiffies(200)); > } > > -static void __sdhci_led_activate(struct sdhci_host *host) > +void __sdhci_led_activate(struct sdhci_host *host) > { > u8 ctrl; > > @@ -420,8 +419,9 @@ static void __sdhci_led_activate(struct sdhci_host *host) > ctrl |= SDHCI_CTRL_LED; > sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); > } > +EXPORT_SYMBOL_GPL(__sdhci_led_activate); The LED functions like __sdhci_led_activate() are not being used and don't need to be exported. > > -static void __sdhci_led_deactivate(struct sdhci_host *host) > +void __sdhci_led_deactivate(struct sdhci_host *host) > { > u8 ctrl; > > @@ -432,6 +432,7 @@ static void __sdhci_led_deactivate(struct sdhci_host *host) > ctrl &= ~SDHCI_CTRL_LED; > sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); > } > +EXPORT_SYMBOL_GPL(__sdhci_led_deactivate); > > #if IS_REACHABLE(CONFIG_LEDS_CLASS) > static void sdhci_led_control(struct led_classdev *led, > @@ -510,14 +511,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host) > > #endif > > -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, > - unsigned long timeout) > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, > + unsigned long timeout) > { > if (sdhci_data_line_cmd(mrq->cmd)) > mod_timer(&host->data_timer, timeout); > else > mod_timer(&host->timer, timeout); > } > +EXPORT_SYMBOL_GPL(sdhci_mod_timer); > > static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) > { > @@ -1098,8 +1100,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) > __sdhci_set_timeout(host, cmd); > } > > -static void sdhci_initialize_data(struct sdhci_host *host, > - struct mmc_data *data) > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data) > { > WARN_ON(host->data); > > @@ -1112,6 +1113,7 @@ static void sdhci_initialize_data(struct sdhci_host *host, > host->data_early = 0; > host->data->bytes_xfered = 0; > } > +EXPORT_SYMBOL_GPL(sdhci_initialize_data); > > static inline void sdhci_set_block_info(struct sdhci_host *host, > struct mmc_data *data) > @@ -1134,12 +1136,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host, > } > } > > -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data) > { > - struct mmc_data *data = cmd->data; > - > - sdhci_initialize_data(host, data); > - > if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { > struct scatterlist *sg; > unsigned int length_mask, offset_mask; > @@ -1224,6 +1222,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > } > > sdhci_set_transfer_irqs(host); > +} > +EXPORT_SYMBOL_GPL(sdhci_prepare_dma); > + > +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > +{ > + struct mmc_data *data = cmd->data; > + > + sdhci_initialize_data(host, data); > + > + sdhci_prepare_dma(host, data); > > sdhci_set_block_info(host, data); > } > @@ -1266,8 +1274,7 @@ static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, > return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; > } > > -static int sdhci_external_dma_setup(struct sdhci_host *host, > - struct mmc_command *cmd) > +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd) > { > int ret, i; > enum dma_transfer_direction dir; > @@ -1320,8 +1327,9 @@ static int sdhci_external_dma_setup(struct sdhci_host *host, > > return ret; > } > +EXPORT_SYMBOL_GPL(sdhci_external_dma_setup); > > -static void sdhci_external_dma_release(struct sdhci_host *host) > +void sdhci_external_dma_release(struct sdhci_host *host) > { > if (host->tx_chan) { > dma_release_channel(host->tx_chan); > @@ -1335,9 +1343,10 @@ static void sdhci_external_dma_release(struct sdhci_host *host) > > sdhci_switch_external_dma(host, false); > } > +EXPORT_SYMBOL_GPL(sdhci_external_dma_release); > > -static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, > - struct mmc_command *cmd) > +void __sdhci_external_dma_prepare_data(struct sdhci_host *host, > + struct mmc_command *cmd) > { > struct mmc_data *data = cmd->data; > > @@ -1348,6 +1357,7 @@ static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, > > sdhci_set_block_info(host, data); > } > +EXPORT_SYMBOL(__sdhci_external_dma_prepare_data); > > static void sdhci_external_dma_prepare_data(struct sdhci_host *host, > struct mmc_command *cmd) > @@ -1362,8 +1372,8 @@ static void sdhci_external_dma_prepare_data(struct sdhci_host *host, > } > } > > -static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > - struct mmc_command *cmd) > +void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > + struct mmc_command *cmd) > { > struct dma_chan *chan; > > @@ -1374,6 +1384,7 @@ static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > if (chan) > dma_async_issue_pending(chan); > } > +EXPORT_SYMBOL_GPL(sdhci_external_dma_pre_transfer); > > #else > > @@ -1425,11 +1436,11 @@ static inline bool sdhci_auto_cmd23(struct sdhci_host *host, > return mrq->sbc && (host->flags & SDHCI_AUTO_CMD23); > } > > -static inline bool sdhci_manual_cmd23(struct sdhci_host *host, > - struct mmc_request *mrq) > +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq) > { > return mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23); > } > +EXPORT_SYMBOL_GPL(sdhci_manual_cmd23); Also don't see sdhci_manual_cmd23() being used. Please check what is being exported. > > static inline void sdhci_auto_cmd_select(struct sdhci_host *host, > struct mmc_command *cmd, > @@ -1541,7 +1552,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) > WARN_ON(i >= SDHCI_MAX_MRQS); > } > > -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > { > if (host->cmd && host->cmd->mrq == mrq) > host->cmd = NULL; > @@ -1565,15 +1576,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > if (!sdhci_has_requests(host)) > sdhci_led_deactivate(host); > } > +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq); > > -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > { > __sdhci_finish_mrq(host, mrq); > > queue_work(host->complete_wq, &host->complete_work); > } > +EXPORT_SYMBOL_GPL(sdhci_finish_mrq); > > -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > +void __sdhci_finish_data_common(struct sdhci_host *host) > { > struct mmc_command *data_cmd = host->data_cmd; > struct mmc_data *data = host->data; > @@ -1607,6 +1620,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > data->bytes_xfered = 0; > else > data->bytes_xfered = data->blksz * data->blocks; > +} > +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common); > + > +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > +{ > + struct mmc_data *data = host->data; > + > + __sdhci_finish_data_common(host); > > /* > * Need to send CMD12 if - > @@ -1645,12 +1666,13 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > } > } > > -static void sdhci_finish_data(struct sdhci_host *host) > +void sdhci_finish_data(struct sdhci_host *host) > { > __sdhci_finish_data(host, false); > } > +EXPORT_SYMBOL_GPL(sdhci_finish_data); Also don't see sdhci_finish_data() being used. Please check what is being exported. > > -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > { > int flags; > u32 mask; > @@ -1692,8 +1714,6 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > sdhci_prepare_data(host, cmd); > } > > - sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); > - > sdhci_set_transfer_mode(host, cmd); > > if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { > @@ -1737,13 +1757,16 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > if (host->use_external_dma) > sdhci_external_dma_pre_transfer(host, cmd); > > + sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); If this move of "sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT)" is intentional, it should be a separate patch. > + > sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); > > return true; > } > +EXPORT_SYMBOL_GPL(sdhci_send_command); It is not necessary to export sdhci_send_command() > > -static bool sdhci_present_error(struct sdhci_host *host, > - struct mmc_command *cmd, bool present) > +bool sdhci_present_error(struct sdhci_host *host, > + struct mmc_command *cmd, bool present) > { > if (!present || host->flags & SDHCI_DEVICE_DEAD) { > cmd->error = -ENOMEDIUM; > @@ -1752,6 +1775,7 @@ static bool sdhci_present_error(struct sdhci_host *host, > > return false; > } > +EXPORT_SYMBOL_GPL(sdhci_present_error); > > static bool sdhci_send_command_retry(struct sdhci_host *host, > struct mmc_command *cmd, > @@ -1815,7 +1839,7 @@ static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd) > } > } > > -static void sdhci_finish_command(struct sdhci_host *host) > +void sdhci_finish_command(struct sdhci_host *host) > { > struct mmc_command *cmd = host->cmd; > > @@ -1868,6 +1892,7 @@ static void sdhci_finish_command(struct sdhci_host *host) > __sdhci_finish_mrq(host, cmd->mrq); > } > } > +EXPORT_SYMBOL_GPL(sdhci_finish_command); It is not necessary to export sdhci_finish_command() > > static u16 sdhci_get_preset_value(struct sdhci_host *host) > { > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index f049331bd0bc..1a9924e7972d 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -850,8 +850,25 @@ static inline void sdhci_read_caps(struct sdhci_host *host) > __sdhci_read_caps(host, NULL, NULL, NULL); > } > > +bool sdhci_data_line_cmd(struct mmc_command *cmd); > void sdhci_runtime_pm_bus_on(struct sdhci_host *host); > void sdhci_runtime_pm_bus_off(struct sdhci_host *host); > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout); > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data); > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data); > +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) > +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd); > +void sdhci_external_dma_release(struct sdhci_host *host); > +void __sdhci_external_dma_prepare_data(struct sdhci_host *host, struct mmc_command *cmd); > +void sdhci_external_dma_pre_transfer(struct sdhci_host *host, struct mmc_command *cmd); > +#endif > +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq); > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); > +void __sdhci_finish_data_common(struct sdhci_host *host); > +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); > +void sdhci_finish_command(struct sdhci_host *host); > +bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present); > u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, > unsigned int *actual_clock); > void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
Hi, Adrian On Wed, Nov 2, 2022 at 1:15 AM Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 19/10/22 14:06, Victor Shih wrote: > > This is a sdhci version of mmc's request operation. > > It covers both UHS-I and UHS-II. > > > > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > > --- > > drivers/mmc/host/sdhci-uhs2.c | 475 ++++++++++++++++++++++++++++++++++ > > drivers/mmc/host/sdhci.c | 91 ++++--- > > drivers/mmc/host/sdhci.h | 17 ++ > > 3 files changed, 550 insertions(+), 33 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c > > index c9d59b8ac37f..41b089ccc200 100644 > > --- a/drivers/mmc/host/sdhci-uhs2.c > > +++ b/drivers/mmc/host/sdhci-uhs2.c > > @@ -13,6 +13,7 @@ > > #include <linux/delay.h> > > #include <linux/ktime.h> > > #include <linux/module.h> > > +#include <linux/mmc/mmc.h> > > > > #include "sdhci.h" > > #include "sdhci-uhs2.h" > > @@ -537,6 +538,479 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) > > return err; > > } > > > > +/*****************************************************************************\ > > + * * > > + * Core functions * > > + * * > > +\*****************************************************************************/ > > + > > +static void sdhci_uhs2_prepare_data(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > + struct mmc_data *data = cmd->data; > > + > > + sdhci_initialize_data(host, data); > > + > > + sdhci_prepare_dma(host, data); > > + > > + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE); > > + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT); > > +} > > + > > +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) > > +static void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > + if (!sdhci_external_dma_setup(host, cmd)) { > > + __sdhci_external_dma_prepare_data(host, cmd); > > + } else { > > + sdhci_external_dma_release(host); > > + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n", > > + mmc_hostname(host->mmc)); > > + sdhci_uhs2_prepare_data(host, cmd); > > + } > > +} > > +#else > > +static inline void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > + /* This should never happen */ > > + WARN_ON_ONCE(1); > > +} > > + > > +static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > +} > > +#endif /* CONFIG_MMC_SDHCI_EXTERNAL_DMA */ > > Let's skip external DMA support to start with. > I will update it in the patch#18 of the new [PATCH V6]. > > + > > +static void sdhci_uhs2_finish_data(struct sdhci_host *host) > > +{ > > + struct mmc_data *data = host->data; > > + > > + __sdhci_finish_data_common(host); > > + > > + /* > > + * FIXME: Is this condition needed? > > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) > > + */ > > No > I will update it in the patch#18 of the new [PATCH V6]. > > + __sdhci_finish_mrq(host, data->mrq); > > +} > > + > > +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > + u16 mode; > > + struct mmc_data *data = cmd->data; > > + u16 arg; > > + > > + if (!data) { > > + /* clear Auto CMD settings for no data CMDs */ > > + arg = cmd->uhs2_cmd->arg; > > + if ((((arg & 0xF) << 8) | ((arg >> 8) & 0xFF)) == > > Please don't open code byte-swapping > > This should be an inline function so it can be used again > further below: > > #define UHS2_ARG_IOADR_MASK 0xfff > > static inline u16 uhs2_dev_cmd(struct mmc_command *cmd) > { > return be16_to_cpu((__be16)cmd->uhs2_cmd->arg) & UHS2_ARG_IOADR_MASK; > } > > I will update it in the patch#18 of the new [PATCH V6]. > > + UHS2_DEV_CMD_TRANS_ABORT) { > > Please wrap at 100 columns instead of 80, here and elsewhere. > I will update it in the patch#18 of the new [PATCH V6]. > > + mode = 0; > > + } else { > > + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE); > > + if (cmd->opcode == MMC_STOP_TRANSMISSION || > > + cmd->opcode == MMC_ERASE) > > + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY; > > + else > > + /* send status mode */ > > + if (cmd->opcode == MMC_SEND_STATUS) > > + mode = 0; > > + } > > + > > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) > > Please don't use CONFIG_MMC_DEBUG > I will update it in the patch#18 of the new [PATCH V6]. > > + DBG("UHS2 no data trans mode is 0x%x.\n", mode); > > + > > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); > > + return; > > + } > > + > > + WARN_ON(!host->data); > > + > > + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY; > > + if (data->flags & MMC_DATA_WRITE) > > + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT; > > + > > + if (data->blocks == 1 && > > + data->blksz != 512 && > > + cmd->opcode != MMC_READ_SINGLE_BLOCK && > > + cmd->opcode != MMC_WRITE_BLOCK) { > > + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN; > > + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE; > > + } > > + > > + if (host->flags & SDHCI_REQ_USE_DMA) > > + mode |= SDHCI_UHS2_TRNS_DMA; > > + > > + if ((host->mmc->uhs2_ios.is_2L_HD_mode) && !cmd->uhs2_tmode0_flag) > > + mode |= SDHCI_UHS2_TRNS_2L_HD; > > + > > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); > > + > > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) > > Please don't use CONFIG_MMC_DEBUG > I will update it in the patch#18 of the new [PATCH V6]. > > + DBG("UHS2 trans mode is 0x%x.\n", mode); > > +} > > + > > +static void __sdhci_uhs2_send_command(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > + int i, j; > > + int cmd_reg; > > + > > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { > > Not necessary to check MMC_UHS2_INITIALIZED here > I will update it in the patch#18 of the new [PATCH V6]. > > + if (!cmd->uhs2_cmd) { > > + pr_err("%s: fatal error, no uhs2_cmd!\n", > > + mmc_hostname(host->mmc)); > > + return; > > + } > > + } > > + > > + i = 0; > > + sdhci_writel(host, > > + ((u32)cmd->uhs2_cmd->arg << 16) | > > + (u32)cmd->uhs2_cmd->header, > > + SDHCI_UHS2_CMD_PACKET + i); > > + i += 4; > > + > > + /* > > + * Per spec, playload (config) should be MSB before sending out. > > + * But we don't need convert here because had set payload as > > + * MSB when preparing config read/write commands. > > + */ > > + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { > > + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), > > + SDHCI_UHS2_CMD_PACKET + i); > > + i += 4; > > + } > > + > > + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) > > + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); > > + > > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { > > Please don't use CONFIG_MMC_DEBUG > I will update it in the patch#18 of the new [PATCH V6]. > > + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); > > + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) > > + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, > > + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); > > + } > > + > > + cmd_reg = cmd->uhs2_cmd->packet_len << > > + SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT; > > + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) > > + cmd_reg |= SDHCI_UHS2_COMMAND_DATA; > > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > > + cmd_reg |= SDHCI_UHS2_COMMAND_CMD12; > > + > > + /* UHS2 Native ABORT */ > > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > > + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | > > + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT)) > > From above, can use (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT) > I will update it in the patch#18 of the new [PATCH V6]. > > + cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT; > > + > > + /* UHS2 Native DORMANT */ > > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && > > + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | > > + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == > > + UHS2_DEV_CMD_GO_DORMANT_STATE)) > > From above, can use (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE) > I will update it in the patch#18 of the new [PATCH V6]. > > + cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT; > > + > > + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); > > + > > + sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND); > > +} > > + > > +static bool sdhci_uhs2_send_command(struct sdhci_host *host, > > + struct mmc_command *cmd) > > +{ > > + int flags; > > + u32 mask; > > + unsigned long timeout; > > + > > + WARN_ON(host->cmd); > > + > > + /* Initially, a command has no error */ > > + cmd->error = 0; > > + > > + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) > > + return sdhci_send_command(host, cmd); > > No check necessary, can remove, and please do not export > sdhci_send_command(). > I will update it in the patch#18 of the new [PATCH V6]. > > + > > + if (cmd->opcode == MMC_STOP_TRANSMISSION) > > + cmd->flags |= MMC_RSP_BUSY; > > + > > + mask = SDHCI_CMD_INHIBIT; > > + > > + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) > > + return false; > > + > > + host->cmd = cmd; > > + host->data_timeout = 0; > > + if (sdhci_data_line_cmd(cmd)) { > > + WARN_ON(host->data_cmd); > > + host->data_cmd = cmd; > > + __sdhci_uhs2_set_timeout(host); > > + } > > + > > + if (cmd->data) { > > + if (host->use_external_dma) > > Let's skip external DMA support for now > I will update it in the patch#18 of the new [PATCH V6]. > > + sdhci_uhs2_external_dma_prepare_data(host, cmd); > > + else > > + sdhci_uhs2_prepare_data(host, cmd); > > + } > > + > > + sdhci_uhs2_set_transfer_mode(host, cmd); > > + > > + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { > > + WARN_ONCE(1, "Unsupported response type!\n"); > > + /* > > + * This does not happen in practice because 136-bit response > > + * commands never have busy waiting, so rather than complicate > > + * the error path, just remove busy waiting and continue. > > + */ > > + cmd->flags &= ~MMC_RSP_BUSY; > > + } > > + > > + if (!(cmd->flags & MMC_RSP_PRESENT)) > > + flags = SDHCI_CMD_RESP_NONE; > > + else if (cmd->flags & MMC_RSP_136) > > + flags = SDHCI_CMD_RESP_LONG; > > + else if (cmd->flags & MMC_RSP_BUSY) > > + flags = SDHCI_CMD_RESP_SHORT_BUSY; > > + else > > + flags = SDHCI_CMD_RESP_SHORT; > > + > > + if (cmd->flags & MMC_RSP_CRC) > > + flags |= SDHCI_CMD_CRC; > > + if (cmd->flags & MMC_RSP_OPCODE) > > + flags |= SDHCI_CMD_INDEX; > > + > > + timeout = jiffies; > > + if (host->data_timeout) > > + timeout += nsecs_to_jiffies(host->data_timeout); > > + else if (!cmd->data && cmd->busy_timeout > 9000) > > + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; > > + else > > + timeout += 10 * HZ; > > + sdhci_mod_timer(host, cmd->mrq, timeout); > > + > > + if (host->use_external_dma) > > + sdhci_external_dma_pre_transfer(host, cmd); > > + > > + __sdhci_uhs2_send_command(host, cmd); > > + > > + return true; > > +} > > + > > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, > > + struct mmc_command *cmd, > > + unsigned long flags) > > + __releases(host->lock) > > + __acquires(host->lock) > > +{ > > + struct mmc_command *deferred_cmd = host->deferred_cmd; > > + int timeout = 10; /* Approx. 10 ms */ > > + bool present; > > + > > + while (!sdhci_uhs2_send_command(host, cmd)) { > > + if (!timeout--) { > > + pr_err("%s: Controller never released inhibit bit(s).\n", > > + mmc_hostname(host->mmc)); > > + sdhci_dumpregs(host); > > + cmd->error = -EIO; > > + return false; > > + } > > + > > + spin_unlock_irqrestore(&host->lock, flags); > > + > > + usleep_range(1000, 1250); > > + > > + present = host->mmc->ops->get_cd(host->mmc); > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + /* A deferred command might disappear, handle that */ > > + if (cmd == deferred_cmd && cmd != host->deferred_cmd) > > + return true; > > + > > + if (sdhci_present_error(host, cmd, present)) > > + return false; > > + } > > + > > + if (cmd == host->deferred_cmd) > > + host->deferred_cmd = NULL; > > + > > + return true; > > +} > > + > > +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) > > +{ > > + struct mmc_command *cmd = host->cmd; > > + u8 resp; > > + u8 ecode; > > + bool bReadA0 = 0; > > + int i; > > + > > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { > > + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); > > + if (resp & UHS2_RES_NACK_MASK) { > > + ecode = (resp >> UHS2_RES_ECODE_POS) & > > + UHS2_RES_ECODE_MASK; > > + pr_err("%s: NACK is got, ECODE=0x%x.\n", > > + mmc_hostname(host->mmc), ecode); > > + } > > + bReadA0 = 1; > > + } > > + > > + if (cmd->uhs2_resp && > > + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { > > + /* Get whole response of some native CCMD, like > > + * DEVICE_INIT, ENUMERATE. > > + */ > > + for (i = 0; i < cmd->uhs2_resp_len; i++) > > + cmd->uhs2_resp[i] = > > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); > > + } else { > > + /* Get SD CMD response and Payload for some read > > + * CCMD, like INQUIRY_CFG. > > + */ > > + /* Per spec (p136), payload field is divided into > > + * a unit of DWORD and transmission order within > > + * a DWORD is big endian. > > + */ > > + if (!bReadA0) > > + sdhci_readl(host, SDHCI_UHS2_RESPONSE); > > + for (i = 4; i < 20; i += 4) { > > + cmd->resp[i / 4 - 1] = > > + (sdhci_readb(host, > > + SDHCI_UHS2_RESPONSE + i) << 24) | > > + (sdhci_readb(host, > > + SDHCI_UHS2_RESPONSE + i + 1) > > + << 16) | > > + (sdhci_readb(host, > > + SDHCI_UHS2_RESPONSE + i + 2) > > + << 8) | > > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); > > + } > > + } > > +} > > + > > +static void sdhci_uhs2_finish_command(struct sdhci_host *host) > > +{ > > + struct mmc_command *cmd = host->cmd; > > + > > + /* FIXME: Is this check necessary? */ > > No > I will update it in the patch#18 of the new [PATCH V6]. > > + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) { > > + sdhci_finish_command(host); > > Please do not export sdhci_finish_command() > I will update it in the patch#18 of the new [PATCH V6]. > > + return; > > + } > > + > > + __sdhci_uhs2_finish_command(host); > > + > > + host->cmd = NULL; > > + > > + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd) > > + mmc_command_done(host->mmc, cmd->mrq); > > + > > + /* > > + * The host can send and interrupt when the busy state has > > + * ended, allowing us to wait without wasting CPU cycles. > > + * The busy signal uses DAT0 so this is similar to waiting > > + * for data to complete. > > + * > > + * Note: The 1.0 specification is a bit ambiguous about this > > + * feature so there might be some problems with older > > + * controllers. > > + */ > > + if (cmd->flags & MMC_RSP_BUSY) { > > + if (cmd->data) { > > + DBG("Cannot wait for busy signal when also doing a data transfer"); > > + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && > > + cmd == host->data_cmd) { > > + /* Command complete before busy is ended */ > > + return; > > + } > > + } > > + > > + /* Processed actual command. */ > > + if (host->data && host->data_early) > > + sdhci_uhs2_finish_data(host); > > + > > + if (!cmd->data) > > + __sdhci_finish_mrq(host, cmd->mrq); > > +} > > + > > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + struct mmc_command *cmd; > > + unsigned long flags; > > + bool present; > > + > > + /* FIXME: check more flags? */ > > No, it's fine. > I will update it in the patch#18 of the new [PATCH V6]. > > + if (!(sdhci_uhs2_mode(host))) { > > + sdhci_request(mmc, mrq); > > + return; > > + } > > We need to clear the stop cmd and sbc to prevent the > driver using them. > > mrq->stop = NULL; > mrq->sbc = NULL; > if (mrq->data) > mrq->data->stop = NULL; > I will update it in the patch#18 of the new [PATCH V6]. > > + > > + /* Firstly check card presence */ > > + present = mmc->ops->get_cd(mmc); > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + if (sdhci_present_error(host, mrq->cmd, present)) > > + goto out_finish; > > + > > + cmd = mrq->cmd; > > + > > + if (!sdhci_uhs2_send_command(host, cmd)) > > + goto out_finish; > > + > > + spin_unlock_irqrestore(&host->lock, flags); > > + > > + return; > > + > > +out_finish: > > + sdhci_finish_mrq(host, mrq); > > + spin_unlock_irqrestore(&host->lock, flags); > > +} > > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); > > + > > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) > > +{ > > + struct sdhci_host *host = mmc_priv(mmc); > > + struct mmc_command *cmd; > > + unsigned long flags; > > + int ret = 0; > > + > > + if (!host->mmc->flags & MMC_UHS2_SUPPORT) > > + return sdhci_request_atomic(mmc, mrq); > > + > > + spin_lock_irqsave(&host->lock, flags); > > + > > + if (sdhci_present_error(host, mrq->cmd, true)) { > > + sdhci_finish_mrq(host, mrq); > > + goto out_finish; > > + } > > + > > + cmd = mrq->cmd; > > + > > + /* > > + * The HSQ may send a command in interrupt context without polling > > + * the busy signaling, which means we should return BUSY if controller > > + * has not released inhibit bits to allow HSQ trying to send request > > + * again in non-atomic context. So we should not finish this request > > + * here. > > + */ > > + if (!sdhci_uhs2_send_command(host, cmd)) > > + ret = -EBUSY; > > + > > +out_finish: > > + spin_unlock_irqrestore(&host->lock, flags); > > + return ret; > > +} > > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); > > + > > /*****************************************************************************\ > > * * > > * Driver init/exit * > > @@ -692,6 +1166,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) > > sdhci_uhs2_start_signal_voltage_switch; > > host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios; > > host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; > > + host->mmc_host_ops.request = sdhci_uhs2_request; > > > > if (!host->mmc_host_ops.uhs2_detect_init) > > host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init; > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > > index b9db2e976010..407169468927 100644 > > --- a/drivers/mmc/host/sdhci.c > > +++ b/drivers/mmc/host/sdhci.c > > @@ -47,8 +47,6 @@ > > static unsigned int debug_quirks = 0; > > static unsigned int debug_quirks2; > > > > -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); > > - > > void sdhci_dumpregs(struct sdhci_host *host) > > { > > SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n"); > > @@ -147,10 +145,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host) > > } > > EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode); > > > > -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd) > > +bool sdhci_data_line_cmd(struct mmc_command *cmd) > > { > > return cmd->data || cmd->flags & MMC_RSP_BUSY; > > } > > +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd); > > > > static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) > > { > > @@ -409,7 +408,7 @@ static void sdhci_reinit(struct sdhci_host *host) > > mmc_detect_change(host->mmc, msecs_to_jiffies(200)); > > } > > > > -static void __sdhci_led_activate(struct sdhci_host *host) > > +void __sdhci_led_activate(struct sdhci_host *host) > > { > > u8 ctrl; > > > > @@ -420,8 +419,9 @@ static void __sdhci_led_activate(struct sdhci_host *host) > > ctrl |= SDHCI_CTRL_LED; > > sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); > > } > > +EXPORT_SYMBOL_GPL(__sdhci_led_activate); > > The LED functions like __sdhci_led_activate() are not being used > and don't need to be exported. > I will update it in the patch#18 of the new [PATCH V6]. > > > > -static void __sdhci_led_deactivate(struct sdhci_host *host) > > +void __sdhci_led_deactivate(struct sdhci_host *host) > > { > > u8 ctrl; > > > > @@ -432,6 +432,7 @@ static void __sdhci_led_deactivate(struct sdhci_host *host) > > ctrl &= ~SDHCI_CTRL_LED; > > sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); > > } > > +EXPORT_SYMBOL_GPL(__sdhci_led_deactivate); > > > > #if IS_REACHABLE(CONFIG_LEDS_CLASS) > > static void sdhci_led_control(struct led_classdev *led, > > @@ -510,14 +511,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host) > > > > #endif > > > > -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, > > - unsigned long timeout) > > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, > > + unsigned long timeout) > > { > > if (sdhci_data_line_cmd(mrq->cmd)) > > mod_timer(&host->data_timer, timeout); > > else > > mod_timer(&host->timer, timeout); > > } > > +EXPORT_SYMBOL_GPL(sdhci_mod_timer); > > > > static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) > > { > > @@ -1098,8 +1100,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) > > __sdhci_set_timeout(host, cmd); > > } > > > > -static void sdhci_initialize_data(struct sdhci_host *host, > > - struct mmc_data *data) > > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data) > > { > > WARN_ON(host->data); > > > > @@ -1112,6 +1113,7 @@ static void sdhci_initialize_data(struct sdhci_host *host, > > host->data_early = 0; > > host->data->bytes_xfered = 0; > > } > > +EXPORT_SYMBOL_GPL(sdhci_initialize_data); > > > > static inline void sdhci_set_block_info(struct sdhci_host *host, > > struct mmc_data *data) > > @@ -1134,12 +1136,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host, > > } > > } > > > > -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data) > > { > > - struct mmc_data *data = cmd->data; > > - > > - sdhci_initialize_data(host, data); > > - > > if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { > > struct scatterlist *sg; > > unsigned int length_mask, offset_mask; > > @@ -1224,6 +1222,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > > } > > > > sdhci_set_transfer_irqs(host); > > +} > > +EXPORT_SYMBOL_GPL(sdhci_prepare_dma); > > + > > +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) > > +{ > > + struct mmc_data *data = cmd->data; > > + > > + sdhci_initialize_data(host, data); > > + > > + sdhci_prepare_dma(host, data); > > > > sdhci_set_block_info(host, data); > > } > > @@ -1266,8 +1274,7 @@ static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, > > return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; > > } > > > > -static int sdhci_external_dma_setup(struct sdhci_host *host, > > - struct mmc_command *cmd) > > +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd) > > { > > int ret, i; > > enum dma_transfer_direction dir; > > @@ -1320,8 +1327,9 @@ static int sdhci_external_dma_setup(struct sdhci_host *host, > > > > return ret; > > } > > +EXPORT_SYMBOL_GPL(sdhci_external_dma_setup); > > > > -static void sdhci_external_dma_release(struct sdhci_host *host) > > +void sdhci_external_dma_release(struct sdhci_host *host) > > { > > if (host->tx_chan) { > > dma_release_channel(host->tx_chan); > > @@ -1335,9 +1343,10 @@ static void sdhci_external_dma_release(struct sdhci_host *host) > > > > sdhci_switch_external_dma(host, false); > > } > > +EXPORT_SYMBOL_GPL(sdhci_external_dma_release); > > > > -static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, > > - struct mmc_command *cmd) > > +void __sdhci_external_dma_prepare_data(struct sdhci_host *host, > > + struct mmc_command *cmd) > > { > > struct mmc_data *data = cmd->data; > > > > @@ -1348,6 +1357,7 @@ static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, > > > > sdhci_set_block_info(host, data); > > } > > +EXPORT_SYMBOL(__sdhci_external_dma_prepare_data); > > > > static void sdhci_external_dma_prepare_data(struct sdhci_host *host, > > struct mmc_command *cmd) > > @@ -1362,8 +1372,8 @@ static void sdhci_external_dma_prepare_data(struct sdhci_host *host, > > } > > } > > > > -static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > > - struct mmc_command *cmd) > > +void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > > + struct mmc_command *cmd) > > { > > struct dma_chan *chan; > > > > @@ -1374,6 +1384,7 @@ static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, > > if (chan) > > dma_async_issue_pending(chan); > > } > > +EXPORT_SYMBOL_GPL(sdhci_external_dma_pre_transfer); > > > > #else > > > > @@ -1425,11 +1436,11 @@ static inline bool sdhci_auto_cmd23(struct sdhci_host *host, > > return mrq->sbc && (host->flags & SDHCI_AUTO_CMD23); > > } > > > > -static inline bool sdhci_manual_cmd23(struct sdhci_host *host, > > - struct mmc_request *mrq) > > +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq) > > { > > return mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23); > > } > > +EXPORT_SYMBOL_GPL(sdhci_manual_cmd23); > > Also don't see sdhci_manual_cmd23() being used. > Please check what is being exported. > I will update it in the patch#18 of the new [PATCH V6]. > > > > static inline void sdhci_auto_cmd_select(struct sdhci_host *host, > > struct mmc_command *cmd, > > @@ -1541,7 +1552,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) > > WARN_ON(i >= SDHCI_MAX_MRQS); > > } > > > > -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > > { > > if (host->cmd && host->cmd->mrq == mrq) > > host->cmd = NULL; > > @@ -1565,15 +1576,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > > if (!sdhci_has_requests(host)) > > sdhci_led_deactivate(host); > > } > > +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq); > > > > -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) > > { > > __sdhci_finish_mrq(host, mrq); > > > > queue_work(host->complete_wq, &host->complete_work); > > } > > +EXPORT_SYMBOL_GPL(sdhci_finish_mrq); > > > > -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > > +void __sdhci_finish_data_common(struct sdhci_host *host) > > { > > struct mmc_command *data_cmd = host->data_cmd; > > struct mmc_data *data = host->data; > > @@ -1607,6 +1620,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > > data->bytes_xfered = 0; > > else > > data->bytes_xfered = data->blksz * data->blocks; > > +} > > +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common); > > + > > +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > > +{ > > + struct mmc_data *data = host->data; > > + > > + __sdhci_finish_data_common(host); > > > > /* > > * Need to send CMD12 if - > > @@ -1645,12 +1666,13 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) > > } > > } > > > > -static void sdhci_finish_data(struct sdhci_host *host) > > +void sdhci_finish_data(struct sdhci_host *host) > > { > > __sdhci_finish_data(host, false); > > } > > +EXPORT_SYMBOL_GPL(sdhci_finish_data); > > Also don't see sdhci_finish_data() being used. > Please check what is being exported. > I will update it in the patch#18 of the new [PATCH V6]. > > > > -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > > +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > > { > > int flags; > > u32 mask; > > @@ -1692,8 +1714,6 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > > sdhci_prepare_data(host, cmd); > > } > > > > - sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); > > - > > sdhci_set_transfer_mode(host, cmd); > > > > if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { > > @@ -1737,13 +1757,16 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > > if (host->use_external_dma) > > sdhci_external_dma_pre_transfer(host, cmd); > > > > + sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); > > If this move of "sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT)" > is intentional, it should be a separate patch. > > > + > > sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); > > > > return true; > > } > > +EXPORT_SYMBOL_GPL(sdhci_send_command); > > It is not necessary to export sdhci_send_command() > I will update it in the patch#18 of the new [PATCH V6]. > > > > -static bool sdhci_present_error(struct sdhci_host *host, > > - struct mmc_command *cmd, bool present) > > +bool sdhci_present_error(struct sdhci_host *host, > > + struct mmc_command *cmd, bool present) > > { > > if (!present || host->flags & SDHCI_DEVICE_DEAD) { > > cmd->error = -ENOMEDIUM; > > @@ -1752,6 +1775,7 @@ static bool sdhci_present_error(struct sdhci_host *host, > > > > return false; > > } > > +EXPORT_SYMBOL_GPL(sdhci_present_error); > > > > static bool sdhci_send_command_retry(struct sdhci_host *host, > > struct mmc_command *cmd, > > @@ -1815,7 +1839,7 @@ static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd) > > } > > } > > > > -static void sdhci_finish_command(struct sdhci_host *host) > > +void sdhci_finish_command(struct sdhci_host *host) > > { > > struct mmc_command *cmd = host->cmd; > > > > @@ -1868,6 +1892,7 @@ static void sdhci_finish_command(struct sdhci_host *host) > > __sdhci_finish_mrq(host, cmd->mrq); > > } > > } > > +EXPORT_SYMBOL_GPL(sdhci_finish_command); > > It is not necessary to export sdhci_finish_command() > I will update it in the patch#18 of the new [PATCH V6]. > > > > static u16 sdhci_get_preset_value(struct sdhci_host *host) > > { > > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > > index f049331bd0bc..1a9924e7972d 100644 > > --- a/drivers/mmc/host/sdhci.h > > +++ b/drivers/mmc/host/sdhci.h > > @@ -850,8 +850,25 @@ static inline void sdhci_read_caps(struct sdhci_host *host) > > __sdhci_read_caps(host, NULL, NULL, NULL); > > } > > > > +bool sdhci_data_line_cmd(struct mmc_command *cmd); > > void sdhci_runtime_pm_bus_on(struct sdhci_host *host); > > void sdhci_runtime_pm_bus_off(struct sdhci_host *host); > > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout); > > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data); > > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data); > > +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) > > +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd); > > +void sdhci_external_dma_release(struct sdhci_host *host); > > +void __sdhci_external_dma_prepare_data(struct sdhci_host *host, struct mmc_command *cmd); > > +void sdhci_external_dma_pre_transfer(struct sdhci_host *host, struct mmc_command *cmd); > > +#endif > > +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq); > > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); > > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); > > +void __sdhci_finish_data_common(struct sdhci_host *host); > > +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); > > +void sdhci_finish_command(struct sdhci_host *host); > > +bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present); > > u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, > > unsigned int *actual_clock); > > void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); > Thanks, Victor Shih
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c index c9d59b8ac37f..41b089ccc200 100644 --- a/drivers/mmc/host/sdhci-uhs2.c +++ b/drivers/mmc/host/sdhci-uhs2.c @@ -13,6 +13,7 @@ #include <linux/delay.h> #include <linux/ktime.h> #include <linux/module.h> +#include <linux/mmc/mmc.h> #include "sdhci.h" #include "sdhci-uhs2.h" @@ -537,6 +538,479 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op) return err; } +/*****************************************************************************\ + * * + * Core functions * + * * +\*****************************************************************************/ + +static void sdhci_uhs2_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); + + sdhci_prepare_dma(host, data); + + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE); + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT); +} + +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) +static void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + if (!sdhci_external_dma_setup(host, cmd)) { + __sdhci_external_dma_prepare_data(host, cmd); + } else { + sdhci_external_dma_release(host); + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n", + mmc_hostname(host->mmc)); + sdhci_uhs2_prepare_data(host, cmd); + } +} +#else +static inline void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + /* This should never happen */ + WARN_ON_ONCE(1); +} + +static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host, + struct mmc_command *cmd) +{ +} +#endif /* CONFIG_MMC_SDHCI_EXTERNAL_DMA */ + +static void sdhci_uhs2_finish_data(struct sdhci_host *host) +{ + struct mmc_data *data = host->data; + + __sdhci_finish_data_common(host); + + /* + * FIXME: Is this condition needed? + if (host->mmc->flags & MMC_UHS2_INITIALIZED) + */ + __sdhci_finish_mrq(host, data->mrq); +} + +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, + struct mmc_command *cmd) +{ + u16 mode; + struct mmc_data *data = cmd->data; + u16 arg; + + if (!data) { + /* clear Auto CMD settings for no data CMDs */ + arg = cmd->uhs2_cmd->arg; + if ((((arg & 0xF) << 8) | ((arg >> 8) & 0xFF)) == + UHS2_DEV_CMD_TRANS_ABORT) { + mode = 0; + } else { + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE); + if (cmd->opcode == MMC_STOP_TRANSMISSION || + cmd->opcode == MMC_ERASE) + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY; + else + /* send status mode */ + if (cmd->opcode == MMC_SEND_STATUS) + mode = 0; + } + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) + DBG("UHS2 no data trans mode is 0x%x.\n", mode); + + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); + return; + } + + WARN_ON(!host->data); + + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY; + if (data->flags & MMC_DATA_WRITE) + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT; + + if (data->blocks == 1 && + data->blksz != 512 && + cmd->opcode != MMC_READ_SINGLE_BLOCK && + cmd->opcode != MMC_WRITE_BLOCK) { + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN; + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE; + } + + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_UHS2_TRNS_DMA; + + if ((host->mmc->uhs2_ios.is_2L_HD_mode) && !cmd->uhs2_tmode0_flag) + mode |= SDHCI_UHS2_TRNS_2L_HD; + + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE); + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) + DBG("UHS2 trans mode is 0x%x.\n", mode); +} + +static void __sdhci_uhs2_send_command(struct sdhci_host *host, + struct mmc_command *cmd) +{ + int i, j; + int cmd_reg; + + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { + if (!cmd->uhs2_cmd) { + pr_err("%s: fatal error, no uhs2_cmd!\n", + mmc_hostname(host->mmc)); + return; + } + } + + i = 0; + sdhci_writel(host, + ((u32)cmd->uhs2_cmd->arg << 16) | + (u32)cmd->uhs2_cmd->header, + SDHCI_UHS2_CMD_PACKET + i); + i += 4; + + /* + * Per spec, playload (config) should be MSB before sending out. + * But we don't need convert here because had set payload as + * MSB when preparing config read/write commands. + */ + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) { + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), + SDHCI_UHS2_CMD_PACKET + i); + i += 4; + } + + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4) + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i); + + if (IS_ENABLED(CONFIG_MMC_DEBUG)) { + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len); + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++) + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i, + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i)); + } + + cmd_reg = cmd->uhs2_cmd->packet_len << + SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT; + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) + cmd_reg |= SDHCI_UHS2_COMMAND_DATA; + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmd_reg |= SDHCI_UHS2_COMMAND_CMD12; + + /* UHS2 Native ABORT */ + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT)) + cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT; + + /* UHS2 Native DORMANT */ + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) && + ((((cmd->uhs2_cmd->arg & 0xF) << 8) | + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == + UHS2_DEV_CMD_GO_DORMANT_STATE)) + cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT; + + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg); + + sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND); +} + +static bool sdhci_uhs2_send_command(struct sdhci_host *host, + struct mmc_command *cmd) +{ + int flags; + u32 mask; + unsigned long timeout; + + WARN_ON(host->cmd); + + /* Initially, a command has no error */ + cmd->error = 0; + + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) + return sdhci_send_command(host, cmd); + + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmd->flags |= MMC_RSP_BUSY; + + mask = SDHCI_CMD_INHIBIT; + + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) + return false; + + host->cmd = cmd; + host->data_timeout = 0; + if (sdhci_data_line_cmd(cmd)) { + WARN_ON(host->data_cmd); + host->data_cmd = cmd; + __sdhci_uhs2_set_timeout(host); + } + + if (cmd->data) { + if (host->use_external_dma) + sdhci_uhs2_external_dma_prepare_data(host, cmd); + else + sdhci_uhs2_prepare_data(host, cmd); + } + + sdhci_uhs2_set_transfer_mode(host, cmd); + + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { + WARN_ONCE(1, "Unsupported response type!\n"); + /* + * This does not happen in practice because 136-bit response + * commands never have busy waiting, so rather than complicate + * the error path, just remove busy waiting and continue. + */ + cmd->flags &= ~MMC_RSP_BUSY; + } + + if (!(cmd->flags & MMC_RSP_PRESENT)) + flags = SDHCI_CMD_RESP_NONE; + else if (cmd->flags & MMC_RSP_136) + flags = SDHCI_CMD_RESP_LONG; + else if (cmd->flags & MMC_RSP_BUSY) + flags = SDHCI_CMD_RESP_SHORT_BUSY; + else + flags = SDHCI_CMD_RESP_SHORT; + + if (cmd->flags & MMC_RSP_CRC) + flags |= SDHCI_CMD_CRC; + if (cmd->flags & MMC_RSP_OPCODE) + flags |= SDHCI_CMD_INDEX; + + timeout = jiffies; + if (host->data_timeout) + timeout += nsecs_to_jiffies(host->data_timeout); + else if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else + timeout += 10 * HZ; + sdhci_mod_timer(host, cmd->mrq, timeout); + + if (host->use_external_dma) + sdhci_external_dma_pre_transfer(host, cmd); + + __sdhci_uhs2_send_command(host, cmd); + + return true; +} + +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host, + struct mmc_command *cmd, + unsigned long flags) + __releases(host->lock) + __acquires(host->lock) +{ + struct mmc_command *deferred_cmd = host->deferred_cmd; + int timeout = 10; /* Approx. 10 ms */ + bool present; + + while (!sdhci_uhs2_send_command(host, cmd)) { + if (!timeout--) { + pr_err("%s: Controller never released inhibit bit(s).\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + cmd->error = -EIO; + return false; + } + + spin_unlock_irqrestore(&host->lock, flags); + + usleep_range(1000, 1250); + + present = host->mmc->ops->get_cd(host->mmc); + + spin_lock_irqsave(&host->lock, flags); + + /* A deferred command might disappear, handle that */ + if (cmd == deferred_cmd && cmd != host->deferred_cmd) + return true; + + if (sdhci_present_error(host, cmd, present)) + return false; + } + + if (cmd == host->deferred_cmd) + host->deferred_cmd = NULL; + + return true; +} + +static void __sdhci_uhs2_finish_command(struct sdhci_host *host) +{ + struct mmc_command *cmd = host->cmd; + u8 resp; + u8 ecode; + bool bReadA0 = 0; + int i; + + if (host->mmc->flags & MMC_UHS2_INITIALIZED) { + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2); + if (resp & UHS2_RES_NACK_MASK) { + ecode = (resp >> UHS2_RES_ECODE_POS) & + UHS2_RES_ECODE_MASK; + pr_err("%s: NACK is got, ECODE=0x%x.\n", + mmc_hostname(host->mmc), ecode); + } + bReadA0 = 1; + } + + if (cmd->uhs2_resp && + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) { + /* Get whole response of some native CCMD, like + * DEVICE_INIT, ENUMERATE. + */ + for (i = 0; i < cmd->uhs2_resp_len; i++) + cmd->uhs2_resp[i] = + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i); + } else { + /* Get SD CMD response and Payload for some read + * CCMD, like INQUIRY_CFG. + */ + /* Per spec (p136), payload field is divided into + * a unit of DWORD and transmission order within + * a DWORD is big endian. + */ + if (!bReadA0) + sdhci_readl(host, SDHCI_UHS2_RESPONSE); + for (i = 4; i < 20; i += 4) { + cmd->resp[i / 4 - 1] = + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i) << 24) | + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 1) + << 16) | + (sdhci_readb(host, + SDHCI_UHS2_RESPONSE + i + 2) + << 8) | + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3); + } + } +} + +static void sdhci_uhs2_finish_command(struct sdhci_host *host) +{ + struct mmc_command *cmd = host->cmd; + + /* FIXME: Is this check necessary? */ + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) { + sdhci_finish_command(host); + return; + } + + __sdhci_uhs2_finish_command(host); + + host->cmd = NULL; + + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd) + mmc_command_done(host->mmc, cmd->mrq); + + /* + * The host can send and interrupt when the busy state has + * ended, allowing us to wait without wasting CPU cycles. + * The busy signal uses DAT0 so this is similar to waiting + * for data to complete. + * + * Note: The 1.0 specification is a bit ambiguous about this + * feature so there might be some problems with older + * controllers. + */ + if (cmd->flags & MMC_RSP_BUSY) { + if (cmd->data) { + DBG("Cannot wait for busy signal when also doing a data transfer"); + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && + cmd == host->data_cmd) { + /* Command complete before busy is ended */ + return; + } + } + + /* Processed actual command. */ + if (host->data && host->data_early) + sdhci_uhs2_finish_data(host); + + if (!cmd->data) + __sdhci_finish_mrq(host, cmd->mrq); +} + +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct mmc_command *cmd; + unsigned long flags; + bool present; + + /* FIXME: check more flags? */ + if (!(sdhci_uhs2_mode(host))) { + sdhci_request(mmc, mrq); + return; + } + + /* Firstly check card presence */ + present = mmc->ops->get_cd(mmc); + + spin_lock_irqsave(&host->lock, flags); + + if (sdhci_present_error(host, mrq->cmd, present)) + goto out_finish; + + cmd = mrq->cmd; + + if (!sdhci_uhs2_send_command(host, cmd)) + goto out_finish; + + spin_unlock_irqrestore(&host->lock, flags); + + return; + +out_finish: + sdhci_finish_mrq(host, mrq); + spin_unlock_irqrestore(&host->lock, flags); +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_request); + +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct mmc_command *cmd; + unsigned long flags; + int ret = 0; + + if (!host->mmc->flags & MMC_UHS2_SUPPORT) + return sdhci_request_atomic(mmc, mrq); + + spin_lock_irqsave(&host->lock, flags); + + if (sdhci_present_error(host, mrq->cmd, true)) { + sdhci_finish_mrq(host, mrq); + goto out_finish; + } + + cmd = mrq->cmd; + + /* + * The HSQ may send a command in interrupt context without polling + * the busy signaling, which means we should return BUSY if controller + * has not released inhibit bits to allow HSQ trying to send request + * again in non-atomic context. So we should not finish this request + * here. + */ + if (!sdhci_uhs2_send_command(host, cmd)) + ret = -EBUSY; + +out_finish: + spin_unlock_irqrestore(&host->lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic); + /*****************************************************************************\ * * * Driver init/exit * @@ -692,6 +1166,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host) sdhci_uhs2_start_signal_voltage_switch; host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios; host->mmc_host_ops.uhs2_control = sdhci_uhs2_control; + host->mmc_host_ops.request = sdhci_uhs2_request; if (!host->mmc_host_ops.uhs2_detect_init) host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b9db2e976010..407169468927 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -47,8 +47,6 @@ static unsigned int debug_quirks = 0; static unsigned int debug_quirks2; -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); - void sdhci_dumpregs(struct sdhci_host *host) { SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n"); @@ -147,10 +145,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host) } EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode); -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd) +bool sdhci_data_line_cmd(struct mmc_command *cmd) { return cmd->data || cmd->flags & MMC_RSP_BUSY; } +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd); static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) { @@ -409,7 +408,7 @@ static void sdhci_reinit(struct sdhci_host *host) mmc_detect_change(host->mmc, msecs_to_jiffies(200)); } -static void __sdhci_led_activate(struct sdhci_host *host) +void __sdhci_led_activate(struct sdhci_host *host) { u8 ctrl; @@ -420,8 +419,9 @@ static void __sdhci_led_activate(struct sdhci_host *host) ctrl |= SDHCI_CTRL_LED; sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); } +EXPORT_SYMBOL_GPL(__sdhci_led_activate); -static void __sdhci_led_deactivate(struct sdhci_host *host) +void __sdhci_led_deactivate(struct sdhci_host *host) { u8 ctrl; @@ -432,6 +432,7 @@ static void __sdhci_led_deactivate(struct sdhci_host *host) ctrl &= ~SDHCI_CTRL_LED; sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); } +EXPORT_SYMBOL_GPL(__sdhci_led_deactivate); #if IS_REACHABLE(CONFIG_LEDS_CLASS) static void sdhci_led_control(struct led_classdev *led, @@ -510,14 +511,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host) #endif -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, - unsigned long timeout) +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, + unsigned long timeout) { if (sdhci_data_line_cmd(mrq->cmd)) mod_timer(&host->data_timer, timeout); else mod_timer(&host->timer, timeout); } +EXPORT_SYMBOL_GPL(sdhci_mod_timer); static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq) { @@ -1098,8 +1100,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) __sdhci_set_timeout(host, cmd); } -static void sdhci_initialize_data(struct sdhci_host *host, - struct mmc_data *data) +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data) { WARN_ON(host->data); @@ -1112,6 +1113,7 @@ static void sdhci_initialize_data(struct sdhci_host *host, host->data_early = 0; host->data->bytes_xfered = 0; } +EXPORT_SYMBOL_GPL(sdhci_initialize_data); static inline void sdhci_set_block_info(struct sdhci_host *host, struct mmc_data *data) @@ -1134,12 +1136,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host, } } -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data) { - struct mmc_data *data = cmd->data; - - sdhci_initialize_data(host, data); - if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { struct scatterlist *sg; unsigned int length_mask, offset_mask; @@ -1224,6 +1222,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) } sdhci_set_transfer_irqs(host); +} +EXPORT_SYMBOL_GPL(sdhci_prepare_dma); + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); + + sdhci_prepare_dma(host, data); sdhci_set_block_info(host, data); } @@ -1266,8 +1274,7 @@ static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; } -static int sdhci_external_dma_setup(struct sdhci_host *host, - struct mmc_command *cmd) +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd) { int ret, i; enum dma_transfer_direction dir; @@ -1320,8 +1327,9 @@ static int sdhci_external_dma_setup(struct sdhci_host *host, return ret; } +EXPORT_SYMBOL_GPL(sdhci_external_dma_setup); -static void sdhci_external_dma_release(struct sdhci_host *host) +void sdhci_external_dma_release(struct sdhci_host *host) { if (host->tx_chan) { dma_release_channel(host->tx_chan); @@ -1335,9 +1343,10 @@ static void sdhci_external_dma_release(struct sdhci_host *host) sdhci_switch_external_dma(host, false); } +EXPORT_SYMBOL_GPL(sdhci_external_dma_release); -static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, - struct mmc_command *cmd) +void __sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) { struct mmc_data *data = cmd->data; @@ -1348,6 +1357,7 @@ static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, sdhci_set_block_info(host, data); } +EXPORT_SYMBOL(__sdhci_external_dma_prepare_data); static void sdhci_external_dma_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) @@ -1362,8 +1372,8 @@ static void sdhci_external_dma_prepare_data(struct sdhci_host *host, } } -static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, - struct mmc_command *cmd) +void sdhci_external_dma_pre_transfer(struct sdhci_host *host, + struct mmc_command *cmd) { struct dma_chan *chan; @@ -1374,6 +1384,7 @@ static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, if (chan) dma_async_issue_pending(chan); } +EXPORT_SYMBOL_GPL(sdhci_external_dma_pre_transfer); #else @@ -1425,11 +1436,11 @@ static inline bool sdhci_auto_cmd23(struct sdhci_host *host, return mrq->sbc && (host->flags & SDHCI_AUTO_CMD23); } -static inline bool sdhci_manual_cmd23(struct sdhci_host *host, - struct mmc_request *mrq) +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq) { return mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23); } +EXPORT_SYMBOL_GPL(sdhci_manual_cmd23); static inline void sdhci_auto_cmd_select(struct sdhci_host *host, struct mmc_command *cmd, @@ -1541,7 +1552,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) WARN_ON(i >= SDHCI_MAX_MRQS); } -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) { if (host->cmd && host->cmd->mrq == mrq) host->cmd = NULL; @@ -1565,15 +1576,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) if (!sdhci_has_requests(host)) sdhci_led_deactivate(host); } +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq); -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) { __sdhci_finish_mrq(host, mrq); queue_work(host->complete_wq, &host->complete_work); } +EXPORT_SYMBOL_GPL(sdhci_finish_mrq); -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) +void __sdhci_finish_data_common(struct sdhci_host *host) { struct mmc_command *data_cmd = host->data_cmd; struct mmc_data *data = host->data; @@ -1607,6 +1620,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) data->bytes_xfered = 0; else data->bytes_xfered = data->blksz * data->blocks; +} +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common); + +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) +{ + struct mmc_data *data = host->data; + + __sdhci_finish_data_common(host); /* * Need to send CMD12 if - @@ -1645,12 +1666,13 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout) } } -static void sdhci_finish_data(struct sdhci_host *host) +void sdhci_finish_data(struct sdhci_host *host) { __sdhci_finish_data(host, false); } +EXPORT_SYMBOL_GPL(sdhci_finish_data); -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) { int flags; u32 mask; @@ -1692,8 +1714,6 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) sdhci_prepare_data(host, cmd); } - sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); - sdhci_set_transfer_mode(host, cmd); if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { @@ -1737,13 +1757,16 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) if (host->use_external_dma) sdhci_external_dma_pre_transfer(host, cmd); + sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); + sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); return true; } +EXPORT_SYMBOL_GPL(sdhci_send_command); -static bool sdhci_present_error(struct sdhci_host *host, - struct mmc_command *cmd, bool present) +bool sdhci_present_error(struct sdhci_host *host, + struct mmc_command *cmd, bool present) { if (!present || host->flags & SDHCI_DEVICE_DEAD) { cmd->error = -ENOMEDIUM; @@ -1752,6 +1775,7 @@ static bool sdhci_present_error(struct sdhci_host *host, return false; } +EXPORT_SYMBOL_GPL(sdhci_present_error); static bool sdhci_send_command_retry(struct sdhci_host *host, struct mmc_command *cmd, @@ -1815,7 +1839,7 @@ static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd) } } -static void sdhci_finish_command(struct sdhci_host *host) +void sdhci_finish_command(struct sdhci_host *host) { struct mmc_command *cmd = host->cmd; @@ -1868,6 +1892,7 @@ static void sdhci_finish_command(struct sdhci_host *host) __sdhci_finish_mrq(host, cmd->mrq); } } +EXPORT_SYMBOL_GPL(sdhci_finish_command); static u16 sdhci_get_preset_value(struct sdhci_host *host) { diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index f049331bd0bc..1a9924e7972d 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -850,8 +850,25 @@ static inline void sdhci_read_caps(struct sdhci_host *host) __sdhci_read_caps(host, NULL, NULL, NULL); } +bool sdhci_data_line_cmd(struct mmc_command *cmd); void sdhci_runtime_pm_bus_on(struct sdhci_host *host); void sdhci_runtime_pm_bus_off(struct sdhci_host *host); +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout); +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data); +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data); +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd); +void sdhci_external_dma_release(struct sdhci_host *host); +void __sdhci_external_dma_prepare_data(struct sdhci_host *host, struct mmc_command *cmd); +void sdhci_external_dma_pre_transfer(struct sdhci_host *host, struct mmc_command *cmd); +#endif +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq); +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq); +void __sdhci_finish_data_common(struct sdhci_host *host); +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); +void sdhci_finish_command(struct sdhci_host *host); +bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present); u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, unsigned int *actual_clock); void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);