From patchwork Wed Nov 16 12:36:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 13045151 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9C5EEC4332F for ; Wed, 16 Nov 2022 12:37:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238846AbiKPMhT (ORCPT ); Wed, 16 Nov 2022 07:37:19 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53732 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239099AbiKPMg7 (ORCPT ); Wed, 16 Nov 2022 07:36:59 -0500 Received: from mail-ej1-x632.google.com (mail-ej1-x632.google.com [IPv6:2a00:1450:4864:20::632]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B730B1CFE4 for ; Wed, 16 Nov 2022 04:36:26 -0800 (PST) Received: by mail-ej1-x632.google.com with SMTP id ud5so43780410ejc.4 for ; Wed, 16 Nov 2022 04:36:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=9ZI+ceW6VQ5zA1QC8NrptsEak6ZySgvdKWJKwF7NqZg=; b=nDNZSRSNb5qBOMRh6dn0wX0VL1+0G9f7KaAM2H65q2ZN3Cj+TEEbDocYgatvapSV3e BhuomuPvki95L2EA8SdARV4TGSJBGs+IPpmVDBP6WJUV2WvvESGRMKhl1DER9K4kkGrv K8N7lLvLQtTNvixAy9tVogjtlY0+nI/kQmJLGnwqs//VYPh9s6bT/IhMhr4Ou9QoR152 8lQ40XKbar2Or2yBbajyQAA255luzDDrmN2s7WRu0gIwk+4EVyLpxz9bnlMAy1RtRD+h BnB11jdg8Ykxi3tO9AAE0Ovo/b5eLPK2lmm27hNYMWa+S6UbHwDF1mYm2Cbs8+fRQOcQ RogQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=9ZI+ceW6VQ5zA1QC8NrptsEak6ZySgvdKWJKwF7NqZg=; b=7iD7E7JY6WpdwKU8H0+VFg1Vjc7QjHq4EkzWFe36DB6og/WP0/uCwOIaHL+pVExu1X pZbEgTS+b7Cz8lhfvWaael4LlMa4+Ing0xerBLYlwWN0TrvrB3B5kbxink/Tn6/PFB42 1WChvterFQIirLvufbZUAd9aY5rGuNCxHhdIInISjJOwS/BiiyPlOIAAjYsPzdXnMweR NgiFCl1iiy1DDCQwWB6TM2dIRkZkkNuRuywboCWbCSla0863PEQ9D+eh151FCH09odoc 3F6WkaJV9xYnkPf2Dm6MyaTeWEkWGG+oLiy9oIBWvEhfw9G+BO52rZNJmr41K2pUkL7M Hipw== X-Gm-Message-State: ANoB5pkE2zSHMeJ7jw8eoQfvOQvOxfpK1XspIF8CLIuKLvjq/mFShICH Jjehn0QQ01gO3XSplIGTR2Ia4A== X-Google-Smtp-Source: AA0mqf7IZRxqxjtOUNLZcB8daGMUMt3UYb5W430IX4XZKYD7e47JaUXyuq69chdXPOqIvtdV9UUSvg== X-Received: by 2002:a17:906:53d8:b0:7ad:cc9f:4ae0 with SMTP id p24-20020a17090653d800b007adcc9f4ae0mr16635994ejo.504.1668602185202; Wed, 16 Nov 2022 04:36:25 -0800 (PST) Received: from localhost.localdomain ([194.29.137.22]) by smtp.gmail.com with ESMTPSA id cb13-20020a170906a44d00b007abafe43c3bsm6773346ejb.86.2022.11.16.04.36.23 (version=TLS1_3 cipher=TLS_CHACHA20_POLY1305_SHA256 bits=256/256); Wed, 16 Nov 2022 04:36:24 -0800 (PST) From: Konrad Dybcio To: linux-arm-msm@vger.kernel.org, andersson@kernel.org, agross@kernel.org, krzysztof.kozlowski@linaro.org Cc: patches@linaro.org, Konrad Dybcio , Ulf Hansson , Rob Herring , Krzysztof Kozlowski , Bhupesh Sharma , linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio Subject: [PATCH v2 3/4] arm64: dts: qcom: sm8350-sagami: Add GPIO line names for TLMM Date: Wed, 16 Nov 2022 13:36:11 +0100 Message-Id: <20221116123612.34302-3-konrad.dybcio@linaro.org> X-Mailer: git-send-email 2.32.0 (Apple Git-132) In-Reply-To: <20221116123612.34302-1-konrad.dybcio@linaro.org> References: <20221116123612.34302-1-konrad.dybcio@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Sagami-common / PDX215 DTSIs to better document the hardware. Diff between 215 and common: < "NC", < "NC", > "WLC_I2C_SDA", > "WLC_I2C_SCL", < "NC", > "WLC_INT_N", > "CAM_MCLK4", < "NC", < "NC", > "TOF_RST_N", < "NC", < "NC", < "NC", > "QLINK1_REQ", > "QLINK1_EN", > "QLINK1_WMSS_RESET_N", It's pretty logical as 1 III has WLC (WireLess Charging), and an additional 3D iToF sensor. As for QLINK, no idea. Signed-off-by: Konrad Dybcio --- No changes in v2. .../qcom/sm8350-sony-xperia-sagami-pdx215.dts | 206 ++++++++++++++++++ .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 203 +++++++++++++++++ 2 files changed, 409 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts index d21bbeb603a6..c74c973a69d2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts @@ -11,3 +11,209 @@ / { model = "Sony Xperia 1 III"; compatible = "sony,pdx215-generic", "qcom,sm8350"; }; + +&tlmm { + gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ + "APPS_I2C_0_SCL", + "UWIDEC_PWR_EN", + "HAP_RST_N", + "WLC_I2C_SDA", + "WLC_I2C_SCL", + "PM8008_1_RESET_N", + "WLC_INT_N", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "PM8350_OPTION", /* GPIO_10 */ + "NC", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "NC", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP_RESET_N", + "SW_SERVICE", + "DISP_ERR_FG", + "TX_GTR_THRES_IN", + "NC", + "NC", + "NC", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "FP_INT_N", + "FP_RESET_N", + "NC", /* GPIO_40 */ + "NC", + "DEBUG_GPIO0", + "FORCE_USB_BOOT", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", /* GPIO_50 */ + "HAP_INT_N", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "SBU_SW_OE", + "SBU_SW_SEL", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HW_ID_0", + "HW_ID_1", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "RF_LCD_ID_EN", + "RF_ID_EXTENSION", + "NC", + "NC", + "NC", + "NC", + "HALL_INT_N", /* GPIO_80 */ + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_SOF_TELE", + "NFC_DWL_REQ", + "NFC_IRQ", + "WCD_RST_N", + "ALS_PROX_INT_N", + "NC", /* GPIO_90 */ + "NC", + "TRAY_DET", + "UDON_SWITCH_SEL", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "CAM_SOF", + "RF_ID_EXTENSION_2", + "RGBC_IR_INT", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CAM_MCLK4", + "NC", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "NC", + "PM8008_1_IRQ", + "CAM3_RESET_N", + "IMU1_INT", + "EXT_VD0_XVS", + "NC", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "NC", + "UIM2_DETECT_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", /* GPIO_140 */ + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DISP_VDDR_EN", + "NC", + "NC", + "PA_INDICATOR_OR", + "TOF_RST_N", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "QLINK1_REQ", + "QLINK1_EN", + "QLINK1_WMSS_RESET_N", + "PM8008_2_IRQ", + "TELEC_PWR_EN", + "PM8008_2_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "WCD_SWR_TX_DATA2", + "NC", + "NC", + "NC", + "NC", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index dab5145358e7..a428ce31ab4e 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -571,6 +571,209 @@ &spi14 { &tlmm { gpio-reserved-ranges = <44 4>; + gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ + "APPS_I2C_0_SCL", + "UWIDEC_PWR_EN", + "HAP_RST_N", + "NC", + "NC", + "PM8008_1_RESET_N", + "NC", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "PM8350_OPTION", /* GPIO_10 */ + "NC", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "NC", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP_RESET_N", + "SW_SERVICE", + "DISP_ERR_FG", + "TX_GTR_THRES_IN", + "NC", + "NC", + "NC", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "FP_INT_N", + "FP_RESET_N", + "NC", /* GPIO_40 */ + "NC", + "DEBUG_GPIO0", + "FORCE_USB_BOOT", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", /* GPIO_50 */ + "HAP_INT_N", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "SBU_SW_OE", + "SBU_SW_SEL", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HW_ID_0", + "HW_ID_1", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "RF_LCD_ID_EN", + "RF_ID_EXTENSION", + "NC", + "NC", + "NC", + "NC", + "HALL_INT_N", /* GPIO_80 */ + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_SOF_TELE", + "NFC_DWL_REQ", + "NFC_IRQ", + "WCD_RST_N", + "ALS_PROX_INT_N", + "NC", /* GPIO_90 */ + "NC", + "TRAY_DET", + "UDON_SWITCH_SEL", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "CAM_SOF", + "RF_ID_EXTENSION_2", + "RGBC_IR_INT", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "NC", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "NC", + "PM8008_1_IRQ", + "CAM3_RESET_N", + "IMU1_INT", + "EXT_VD0_XVS", + "NC", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "NC", + "UIM2_DETECT_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", /* GPIO_140 */ + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DISP_VDDR_EN", + "NC", + "NC", + "PA_INDICATOR_OR", + "NC", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "PM8008_2_IRQ", + "TELEC_PWR_EN", + "PM8008_2_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "WCD_SWR_TX_DATA2", + "NC", + "NC", + "NC", + "NC", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; ts_int_default: ts-int-default-state { pins = "gpio23";