diff mbox series

[RFC,v1,12/19] rtw88: sdio: Add HCI implementation for SDIO based chipsets

Message ID 20221227233020.284266-13-martin.blumenstingl@googlemail.com (mailing list archive)
State New, archived
Headers show
Series rtw88: Add SDIO support | expand

Commit Message

Martin Blumenstingl Dec. 27, 2022, 11:30 p.m. UTC
Add a sub-driver for SDIO based chipsets which implements the following
functionality:
- register accessors for 8, 16 and 32 bits for all states of the card
  (including usage of 4x 8 bit access for one 32 bit buffer if the card
  is not fully powered on yet - or if it's fully powered on then 1x 32
  bit access is used)
- checking whether there's space in the TX FIFO queue to transmit data
- transfers from the host to the device for actual network traffic,
  reserved pages (for firmware download) and H2C (host-to-card)
  transfers
- receiving data from the device
- deep power saving state

The transmit path is optimized so DMA-capable SDIO host controllers can
directly use the buffers provided because the buffer's physical
addresses are 8 byte aligned.

The receive path is prepared to support RX aggregation where the
chipset combines multiple MAC frames into one bigger buffer to reduce
SDIO transfer overhead.

Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/net/wireless/realtek/rtw88/Kconfig  |    3 +
 drivers/net/wireless/realtek/rtw88/Makefile |    3 +
 drivers/net/wireless/realtek/rtw88/debug.h  |    1 +
 drivers/net/wireless/realtek/rtw88/mac.h    |    1 -
 drivers/net/wireless/realtek/rtw88/reg.h    |   10 +
 drivers/net/wireless/realtek/rtw88/sdio.c   | 1242 +++++++++++++++++++
 drivers/net/wireless/realtek/rtw88/sdio.h   |  175 +++
 7 files changed, 1434 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.c
 create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.h

Comments

Ping-Ke Shih Dec. 28, 2022, 9:39 a.m. UTC | #1
> -----Original Message-----
> From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Sent: Wednesday, December 28, 2022 7:30 AM
> To: linux-wireless@vger.kernel.org
> Cc: Yan-Hsuan Chuang <tony0620emma@gmail.com>; Kalle Valo <kvalo@kernel.org>; Ulf Hansson
> <ulf.hansson@linaro.org>; linux-kernel@vger.kernel.org; netdev@vger.kernel.org;
> linux-mmc@vger.kernel.org; Chris Morgan <macroalpha82@gmail.com>; Nitin Gupta <nitin.gupta981@gmail.com>;
> Neo Jou <neojou@gmail.com>; Ping-Ke Shih <pkshih@realtek.com>; Jernej Skrabec <jernej.skrabec@gmail.com>;
> Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Subject: [RFC PATCH v1 12/19] rtw88: sdio: Add HCI implementation for SDIO based chipsets
> 
> Add a sub-driver for SDIO based chipsets which implements the following
> functionality:
> - register accessors for 8, 16 and 32 bits for all states of the card
>   (including usage of 4x 8 bit access for one 32 bit buffer if the card
>   is not fully powered on yet - or if it's fully powered on then 1x 32
>   bit access is used)
> - checking whether there's space in the TX FIFO queue to transmit data
> - transfers from the host to the device for actual network traffic,
>   reserved pages (for firmware download) and H2C (host-to-card)
>   transfers
> - receiving data from the device
> - deep power saving state
> 
> The transmit path is optimized so DMA-capable SDIO host controllers can
> directly use the buffers provided because the buffer's physical
> addresses are 8 byte aligned.
> 
> The receive path is prepared to support RX aggregation where the
> chipset combines multiple MAC frames into one bigger buffer to reduce
> SDIO transfer overhead.
> 
> Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/net/wireless/realtek/rtw88/Kconfig  |    3 +
>  drivers/net/wireless/realtek/rtw88/Makefile |    3 +
>  drivers/net/wireless/realtek/rtw88/debug.h  |    1 +
>  drivers/net/wireless/realtek/rtw88/mac.h    |    1 -
>  drivers/net/wireless/realtek/rtw88/reg.h    |   10 +
>  drivers/net/wireless/realtek/rtw88/sdio.c   | 1242 +++++++++++++++++++
>  drivers/net/wireless/realtek/rtw88/sdio.h   |  175 +++
>  7 files changed, 1434 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.c
>  create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.h
> 

[...]

> +
> +static void rtw_sdio_writel(struct rtw_sdio *rtwsdio, u32 val,
> +			    u32 addr, int *ret)
> +{
> +	u8 buf[4];
> +	int i;
> +
> +	if (!(addr & 3) && rtwsdio->is_powered_on) {
> +		sdio_writel(rtwsdio->sdio_func, val, addr, ret);
> +		return;
> +	}
> +
> +	*(__le32 *)buf = cpu_to_le32(val);
> +
> +	for (i = 0; i < 4; i++) {
> +		sdio_writeb(rtwsdio->sdio_func, buf[i], addr + i, ret);
> +		if (*ret)

Do you need some messages to know something wrong?

> +			return;
> +	}
> +}
> +
> +static u32 rtw_sdio_readl(struct rtw_sdio *rtwsdio, u32 addr, int *ret)
> +{
> +	u8 buf[4];
> +	int i;
> +
> +	if (!(addr & 3) && rtwsdio->is_powered_on)
> +		return sdio_readl(rtwsdio->sdio_func, addr, ret);
> +
> +	for (i = 0; i < 4; i++) {
> +		buf[i] = sdio_readb(rtwsdio->sdio_func, addr + i, ret);
> +		if (*ret)
> +			return 0;
> +	}
> +
> +	return le32_to_cpu(*(__le32 *)buf);
> +}
> +
> +static u8 rtw_sdio_read_indirect8(struct rtw_dev *rtwdev, u32 addr, int *ret)
> +{
> +	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +	u32 reg_cfg, reg_data;
> +	int retry;
> +	u8 tmp;
> +
> +	reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG);
> +	reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA);
> +
> +	rtw_sdio_writel(rtwsdio, BIT(19) | addr, reg_cfg, ret);
> +	if (*ret)
> +		return 0;
> +
> +	for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) {
> +		tmp = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, ret);
> +		if (!ret && tmp & BIT(4))

'ret' is pointer, do you need '*' ?

if (!*ret && tmp & BIT(4)) 

As I look into sdio_readb(), it use 'int *err_ret' as arugment. 
Would you like to change ' int *ret' to 'int *err_ret'?
It could help to misunderstand. 

> +			break;
> +	}
> +
> +	if (*ret)
> +		return 0;
> +
> +	return sdio_readb(rtwsdio->sdio_func, reg_data, ret);
> +}
> +

[...]

> +
> +static void rtw_sdio_rx_aggregation(struct rtw_dev *rtwdev, bool enable)
> +{
> +	u8 size, timeout;
> +
> +	if (enable) {
> +		if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C) {
> +			size = 0xff;
> +			timeout = 0x20;
> +		} else {
> +			size = 0x6;
> +			timeout = 0x6;
> +		}
> +
> +		/* Make the firmware honor the size limit configured below */
> +		rtw_write32_set(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
> +
> +		rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
> +
> +		rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, size |
> +			    (timeout << BIT_SHIFT_DMA_AGG_TO_V1));

BIT_RXDMA_AGG_PG_TH GENMASK(7, 0)	// for size
BIT_DMA_AGG_TO_V1 GENMASK(15, 8)	// for timeout

> +
> +		rtw_write8_set(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE);
> +	} else {
> +		rtw_write32_clr(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
> +		rtw_write8_clr(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
> +		rtw_write8_clr(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE);
> +	}
> +}
> +
> +static void rtw_sdio_enable_interrupt(struct rtw_dev *rtwdev)
> +{
> +	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +
> +	rtw_write32(rtwdev, REG_SDIO_HIMR, rtwsdio->irq_mask);
> +}
> +
> +static void rtw_sdio_disable_interrupt(struct rtw_dev *rtwdev)
> +{
> +	rtw_write32(rtwdev, REG_SDIO_HIMR, 0x0);
> +}
> +
> +static u8 rtw_sdio_get_tx_qsel(struct rtw_dev *rtwdev, struct sk_buff *skb,
> +			       u8 queue)
> +{
> +	switch (queue) {
> +	case RTW_TX_QUEUE_BCN:
> +		return TX_DESC_QSEL_BEACON;
> +	case RTW_TX_QUEUE_H2C:
> +		return TX_DESC_QSEL_H2C;
> +	case RTW_TX_QUEUE_MGMT:
> +		if (rtw_chip_wcpu_11n(rtwdev))
> +			return TX_DESC_QSEL_HIGH;
> +		else
> +			return TX_DESC_QSEL_MGMT;
> +	case RTW_TX_QUEUE_HI0:
> +		return TX_DESC_QSEL_HIGH;
> +	default:
> +		return skb->priority;
> +	}
> +};

no need ';'

[...]

> +
> +static void rtw_sdio_rx_isr(struct rtw_dev *rtwdev)
> +{
> +	u32 rx_len;
> +
> +	while (true) {

add a limit to prevent infinite loop.

> +		if (rtw_chip_wcpu_11n(rtwdev))
> +			rx_len = rtw_read16(rtwdev, REG_SDIO_RX0_REQ_LEN);
> +		else
> +			rx_len = rtw_read32(rtwdev, REG_SDIO_RX0_REQ_LEN);
> +
> +		if (!rx_len)
> +			break;
> +
> +		rtw_sdio_rxfifo_recv(rtwdev, rx_len);
> +	}
> +}
> +

[...]

> +
> +static void rtw_sdio_process_tx_queue(struct rtw_dev *rtwdev,
> +				      enum rtw_tx_queue_type queue)
> +{
> +	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +	struct sk_buff *skb;
> +	int ret;
> +
> +	while (true) {

Can we have a limit?

> +		skb = skb_dequeue(&rtwsdio->tx_queue[queue]);
> +		if (!skb)
> +			break;
> +
> +		ret = rtw_sdio_write_port(rtwdev, skb, queue);
> +		if (ret) {
> +			skb_queue_head(&rtwsdio->tx_queue[queue], skb);
> +			break;
> +		}
> +
> +		if (queue <= RTW_TX_QUEUE_VO)
> +			rtw_sdio_indicate_tx_status(rtwdev, skb);
> +		else
> +			dev_kfree_skb_any(skb);
> +	}
> +}
> +

[...]
Martin Blumenstingl Dec. 28, 2022, 11:59 a.m. UTC | #2
Hi Ping-Ke,

as always: thank you so much for taking time to go through this!

On Wed, Dec 28, 2022 at 10:39 AM Ping-Ke Shih <pkshih@realtek.com> wrote:
[...]
>
> > +
> > +static void rtw_sdio_writel(struct rtw_sdio *rtwsdio, u32 val,
> > +                         u32 addr, int *ret)
> > +{
> > +     u8 buf[4];
> > +     int i;
> > +
> > +     if (!(addr & 3) && rtwsdio->is_powered_on) {
> > +             sdio_writel(rtwsdio->sdio_func, val, addr, ret);
> > +             return;
> > +     }
> > +
> > +     *(__le32 *)buf = cpu_to_le32(val);
> > +
> > +     for (i = 0; i < 4; i++) {
> > +             sdio_writeb(rtwsdio->sdio_func, buf[i], addr + i, ret);
> > +             if (*ret)
>
> Do you need some messages to know something wrong?
It's not obvious but we're already logging that something went wrong.
The messages are logged in rtw_sdio_{read,write}{8,16,32}.
We do this because there's multiple ways to access data (direct,
indirect, ...) and some of them require multiple register operations.
So we print one message in the end.

[...]
> > +static u8 rtw_sdio_read_indirect8(struct rtw_dev *rtwdev, u32 addr, int *ret)
> > +{
> > +     struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> > +     u32 reg_cfg, reg_data;
> > +     int retry;
> > +     u8 tmp;
> > +
> > +     reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG);
> > +     reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA);
> > +
> > +     rtw_sdio_writel(rtwsdio, BIT(19) | addr, reg_cfg, ret);
> > +     if (*ret)
> > +             return 0;
> > +
> > +     for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) {
> > +             tmp = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, ret);
> > +             if (!ret && tmp & BIT(4))
>
> 'ret' is pointer, do you need '*' ?
Well spotted - thank you!

[...]
> As I look into sdio_readb(), it use 'int *err_ret' as arugment.
> Would you like to change ' int *ret' to 'int *err_ret'?
> It could help to misunderstand.
Sure, I'll do that

[...]
> > +             rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, size |
> > +                         (timeout << BIT_SHIFT_DMA_AGG_TO_V1));
>
> BIT_RXDMA_AGG_PG_TH GENMASK(7, 0)       // for size
> BIT_DMA_AGG_TO_V1 GENMASK(15, 8)        // for timeout
Thanks, I'll use these

[...]
> > +static void rtw_sdio_rx_isr(struct rtw_dev *rtwdev)
> > +{
> > +     u32 rx_len;
> > +
> > +     while (true) {
>
> add a limit to prevent infinite loop.
Do you have any recommendations on how many packets to pull in one go?
My thinking is: pulling to little data at once can hurt performance

[...]
>
> > +
> > +static void rtw_sdio_process_tx_queue(struct rtw_dev *rtwdev,
> > +                                   enum rtw_tx_queue_type queue)
> > +{
> > +     struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> > +     struct sk_buff *skb;
> > +     int ret;
> > +
> > +     while (true) {
>
> Can we have a limit?
Similar to the question above: do you have any recommendations on how
many packets (per queue) to send in one go?


Best regards,
Martin
Ping-Ke Shih Dec. 29, 2022, 12:50 a.m. UTC | #3
> -----Original Message-----
> From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Sent: Wednesday, December 28, 2022 8:00 PM
> To: Ping-Ke Shih <pkshih@realtek.com>
> Cc: linux-wireless@vger.kernel.org; Yan-Hsuan Chuang <tony0620emma@gmail.com>; Kalle Valo
> <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-kernel@vger.kernel.org;
> netdev@vger.kernel.org; linux-mmc@vger.kernel.org; Chris Morgan <macroalpha82@gmail.com>; Nitin Gupta
> <nitin.gupta981@gmail.com>; Neo Jou <neojou@gmail.com>; Jernej Skrabec <jernej.skrabec@gmail.com>
> Subject: Re: [RFC PATCH v1 12/19] rtw88: sdio: Add HCI implementation for SDIO based chipsets
> 
> Hi Ping-Ke,
> 
> as always: thank you so much for taking time to go through this!
> 
> On Wed, Dec 28, 2022 at 10:39 AM Ping-Ke Shih <pkshih@realtek.com> wrote:

[...]

> > > +static void rtw_sdio_rx_isr(struct rtw_dev *rtwdev)
> > > +{
> > > +     u32 rx_len;
> > > +
> > > +     while (true) {
> >
> > add a limit to prevent infinite loop.
> Do you have any recommendations on how many packets to pull in one go?
> My thinking is: pulling to little data at once can hurt performance

This is to prevent unexpected things happen, and normally we receive/send
all packets at once like while(true) code. So, maybe we can have rough limit,
like 512 that would be enough for most cases. To have accurate number, you
can do experiments with the highest performance to see the loop count in
real usage, and 5 or 10 times count as limit.

However, when I reviewed rtw88 USB patches, I found we can't always break
the loop, because it could only one chance to free skb(s). So, you should
make sure we really can break the loop logically, and then decide which
limit is suitable for us.

> 
> [...]
> >
> > > +
> > > +static void rtw_sdio_process_tx_queue(struct rtw_dev *rtwdev,
> > > +                                   enum rtw_tx_queue_type queue)
> > > +{
> > > +     struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> > > +     struct sk_buff *skb;
> > > +     int ret;
> > > +
> > > +     while (true) {
> >
> > Can we have a limit?
> Similar to the question above: do you have any recommendations on how
> many packets (per queue) to send in one go?
> 

Ping-Ke
Ulf Hansson Jan. 3, 2023, 11:42 a.m. UTC | #4
On Wed, 28 Dec 2022 at 00:30, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Add a sub-driver for SDIO based chipsets which implements the following
> functionality:
> - register accessors for 8, 16 and 32 bits for all states of the card
>   (including usage of 4x 8 bit access for one 32 bit buffer if the card
>   is not fully powered on yet - or if it's fully powered on then 1x 32
>   bit access is used)
> - checking whether there's space in the TX FIFO queue to transmit data
> - transfers from the host to the device for actual network traffic,
>   reserved pages (for firmware download) and H2C (host-to-card)
>   transfers
> - receiving data from the device
> - deep power saving state
>
> The transmit path is optimized so DMA-capable SDIO host controllers can
> directly use the buffers provided because the buffer's physical
> addresses are 8 byte aligned.
>
> The receive path is prepared to support RX aggregation where the
> chipset combines multiple MAC frames into one bigger buffer to reduce
> SDIO transfer overhead.
>
> Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

This looks good to me, so feel free to add:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe



> ---
>  drivers/net/wireless/realtek/rtw88/Kconfig  |    3 +
>  drivers/net/wireless/realtek/rtw88/Makefile |    3 +
>  drivers/net/wireless/realtek/rtw88/debug.h  |    1 +
>  drivers/net/wireless/realtek/rtw88/mac.h    |    1 -
>  drivers/net/wireless/realtek/rtw88/reg.h    |   10 +
>  drivers/net/wireless/realtek/rtw88/sdio.c   | 1242 +++++++++++++++++++
>  drivers/net/wireless/realtek/rtw88/sdio.h   |  175 +++
>  7 files changed, 1434 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.c
>  create mode 100644 drivers/net/wireless/realtek/rtw88/sdio.h
>
> diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig
> index 651ab56d9c6b..cdf9cb478ee2 100644
> --- a/drivers/net/wireless/realtek/rtw88/Kconfig
> +++ b/drivers/net/wireless/realtek/rtw88/Kconfig
> @@ -16,6 +16,9 @@ config RTW88_CORE
>  config RTW88_PCI
>         tristate
>
> +config RTW88_SDIO
> +       tristate
> +
>  config RTW88_USB
>         tristate
>
> diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile
> index fe7293ee87b4..892cad60ba31 100644
> --- a/drivers/net/wireless/realtek/rtw88/Makefile
> +++ b/drivers/net/wireless/realtek/rtw88/Makefile
> @@ -59,5 +59,8 @@ rtw88_8821cu-objs             := rtw8821cu.o
>  obj-$(CONFIG_RTW88_PCI)                += rtw88_pci.o
>  rtw88_pci-objs                 := pci.o
>
> +obj-$(CONFIG_RTW88_SDIO)       += rtw88_sdio.o
> +rtw88_sdio-objs                        := sdio.o
> +
>  obj-$(CONFIG_RTW88_USB)                += rtw88_usb.o
>  rtw88_usb-objs                 := usb.o
> diff --git a/drivers/net/wireless/realtek/rtw88/debug.h b/drivers/net/wireless/realtek/rtw88/debug.h
> index 066792dd96af..a9149c6c2b48 100644
> --- a/drivers/net/wireless/realtek/rtw88/debug.h
> +++ b/drivers/net/wireless/realtek/rtw88/debug.h
> @@ -24,6 +24,7 @@ enum rtw_debug_mask {
>         RTW_DBG_ADAPTIVITY      = 0x00008000,
>         RTW_DBG_HW_SCAN         = 0x00010000,
>         RTW_DBG_STATE           = 0x00020000,
> +       RTW_DBG_SDIO            = 0x00040000,
>
>         RTW_DBG_ALL             = 0xffffffff
>  };
> diff --git a/drivers/net/wireless/realtek/rtw88/mac.h b/drivers/net/wireless/realtek/rtw88/mac.h
> index 3172aa5ac4de..58c3dccc14bb 100644
> --- a/drivers/net/wireless/realtek/rtw88/mac.h
> +++ b/drivers/net/wireless/realtek/rtw88/mac.h
> @@ -7,7 +7,6 @@
>
>  #define RTW_HW_PORT_NUM                5
>  #define cut_version_to_mask(cut) (0x1 << ((cut) + 1))
> -#define SDIO_LOCAL_OFFSET      0x10250000
>  #define DDMA_POLLING_COUNT     1000
>  #define C2H_PKT_BUF            256
>  #define REPORT_BUF             128
> diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
> index 8852b24d6c2a..4ea2c6b491e9 100644
> --- a/drivers/net/wireless/realtek/rtw88/reg.h
> +++ b/drivers/net/wireless/realtek/rtw88/reg.h
> @@ -185,6 +185,9 @@
>         (((x) & BIT_MASK_TXDMA_VIQ_MAP) << BIT_SHIFT_TXDMA_VIQ_MAP)
>  #define REG_TXDMA_PQ_MAP       0x010C
>  #define BIT_RXDMA_ARBBW_EN     BIT(0)
> +#define BIT_RXSHFT_EN          BIT(1)
> +#define BIT_RXDMA_AGG_EN       BIT(2)
> +#define BIT_TXDMA_BW_EN                BIT(3)
>  #define BIT_SHIFT_TXDMA_BEQ_MAP        8
>  #define BIT_MASK_TXDMA_BEQ_MAP 0x3
>  #define BIT_TXDMA_BEQ_MAP(x)                                                   \
> @@ -283,10 +286,17 @@
>  #define REG_H2C_TAIL           0x0248
>  #define REG_H2C_READ_ADDR      0x024C
>  #define REG_H2C_INFO           0x0254
> +#define REG_RXDMA_AGG_PG_TH    0x0280
> +#define BIT_SHIFT_DMA_AGG_TO_V1        8
> +#define BIT_EN_PRE_CALC                BIT(29)
>  #define REG_RXPKT_NUM          0x0284
>  #define BIT_RXDMA_REQ          BIT(19)
>  #define BIT_RW_RELEASE         BIT(18)
>  #define BIT_RXDMA_IDLE         BIT(17)
> +#define REG_RXDMA_STATUS       0x0288
> +#define REG_RXDMA_DPR          0x028C
> +#define REG_RXDMA_MODE         0x0290
> +#define BIT_DMA_MODE           BIT(1)
>  #define REG_RXPKTNUM           0x02B0
>
>  #define REG_INT_MIG            0x0304
> diff --git a/drivers/net/wireless/realtek/rtw88/sdio.c b/drivers/net/wireless/realtek/rtw88/sdio.c
> new file mode 100644
> index 000000000000..0e637ff2293f
> --- /dev/null
> +++ b/drivers/net/wireless/realtek/rtw88/sdio.c
> @@ -0,0 +1,1242 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> + * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
> + *
> + * Based on rtw88/pci.c:
> + *   Copyright(c) 2018-2019  Realtek Corporation
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/sdio_func.h>
> +#include "sdio.h"
> +#include "reg.h"
> +#include "tx.h"
> +#include "rx.h"
> +#include "fw.h"
> +#include "ps.h"
> +#include "debug.h"
> +
> +#define RTW_SDIO_INDIRECT_RW_RETRIES           50
> +
> +static bool rtw_sdio_is_bus_addr(u32 addr)
> +{
> +       return (addr & RTW_SDIO_BUS_MSK) != 0;
> +}
> +
> +static bool rtw_sdio_bus_claim_needed(struct rtw_sdio *rtwsdio)
> +{
> +       return !rtwsdio->irq_thread ||
> +              rtwsdio->irq_thread != current;
> +}
> +
> +static u32 rtw_sdio_to_bus_offset(struct rtw_dev *rtwdev, u32 addr)
> +{
> +       switch (addr & RTW_SDIO_BUS_MSK) {
> +       case WLAN_IOREG_OFFSET:
> +               addr &= WLAN_IOREG_REG_MSK;
> +               addr |= FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
> +                                  REG_SDIO_CMD_ADDR_MAC_REG);
> +               break;
> +       case SDIO_LOCAL_OFFSET:
> +               addr &= SDIO_LOCAL_REG_MSK;
> +               addr |= FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
> +                                  REG_SDIO_CMD_ADDR_SDIO_REG);
> +               break;
> +       default:
> +               rtw_warn(rtwdev, "Cannot convert addr 0x%08x to bus offset",
> +                        addr);
> +       }
> +
> +       return addr;
> +}
> +
> +static void rtw_sdio_writel(struct rtw_sdio *rtwsdio, u32 val,
> +                           u32 addr, int *ret)
> +{
> +       u8 buf[4];
> +       int i;
> +
> +       if (!(addr & 3) && rtwsdio->is_powered_on) {
> +               sdio_writel(rtwsdio->sdio_func, val, addr, ret);
> +               return;
> +       }
> +
> +       *(__le32 *)buf = cpu_to_le32(val);
> +
> +       for (i = 0; i < 4; i++) {
> +               sdio_writeb(rtwsdio->sdio_func, buf[i], addr + i, ret);
> +               if (*ret)
> +                       return;
> +       }
> +}
> +
> +static u32 rtw_sdio_readl(struct rtw_sdio *rtwsdio, u32 addr, int *ret)
> +{
> +       u8 buf[4];
> +       int i;
> +
> +       if (!(addr & 3) && rtwsdio->is_powered_on)
> +               return sdio_readl(rtwsdio->sdio_func, addr, ret);
> +
> +       for (i = 0; i < 4; i++) {
> +               buf[i] = sdio_readb(rtwsdio->sdio_func, addr + i, ret);
> +               if (*ret)
> +                       return 0;
> +       }
> +
> +       return le32_to_cpu(*(__le32 *)buf);
> +}
> +
> +static u8 rtw_sdio_read_indirect8(struct rtw_dev *rtwdev, u32 addr, int *ret)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       u32 reg_cfg, reg_data;
> +       int retry;
> +       u8 tmp;
> +
> +       reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG);
> +       reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA);
> +
> +       rtw_sdio_writel(rtwsdio, BIT(19) | addr, reg_cfg, ret);
> +       if (*ret)
> +               return 0;
> +
> +       for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) {
> +               tmp = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, ret);
> +               if (!ret && tmp & BIT(4))
> +                       break;
> +       }
> +
> +       if (*ret)
> +               return 0;
> +
> +       return sdio_readb(rtwsdio->sdio_func, reg_data, ret);
> +}
> +
> +static int rtw_sdio_read_indirect_bytes(struct rtw_dev *rtwdev, u32 addr,
> +                                       u8 *buf, int count)
> +{
> +       int i, ret;
> +
> +       for (i = 0; i < count; i++) {
> +               buf[0] = rtw_sdio_read_indirect8(rtwdev, addr + i, &ret);
> +               if (ret)
> +                       break;
> +       }
> +
> +       return ret;
> +}
> +
> +static u32 rtw_sdio_read_indirect32(struct rtw_dev *rtwdev, u32 addr, int *ret)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       u32 reg_cfg, reg_data, val;
> +       int retry;
> +
> +       reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG);
> +       reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA);
> +
> +       rtw_sdio_writel(rtwsdio, BIT(19) | BIT(17) | addr, reg_cfg, ret);
> +       if (*ret)
> +               return 0;
> +
> +       for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) {
> +               val = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, ret);
> +               if (!ret && (val & BIT(4)))
> +                       break;
> +       }
> +
> +       if (!*ret)
> +               val = rtw_sdio_readl(rtwsdio, reg_data, ret);
> +
> +       return val;
> +}
> +
> +static u8 rtw_sdio_read8(struct rtw_dev *rtwdev, u32 addr)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool direct, bus_claim;
> +       int ret;
> +       u8 val;
> +
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +       direct = rtw_sdio_is_bus_addr(addr);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       if (direct) {
> +               addr = rtw_sdio_to_bus_offset(rtwdev, addr);
> +               val = sdio_readb(rtwsdio->sdio_func, addr, &ret);
> +       } else {
> +               val = rtw_sdio_read_indirect8(rtwdev, addr, &ret);
> +       }
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev, "sdio read8 failed (0x%x): %d", addr, ret);
> +
> +       return val;
> +}
> +
> +static u16 rtw_sdio_read16(struct rtw_dev *rtwdev, u32 addr)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool direct, bus_claim;
> +       u8 buf[2];
> +       int ret;
> +       u16 val;
> +
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +       direct = rtw_sdio_is_bus_addr(addr);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       if (direct) {
> +               addr = rtw_sdio_to_bus_offset(rtwdev, addr);
> +               buf[0] = sdio_readb(rtwsdio->sdio_func, addr, &ret);
> +               if (!ret)
> +                       buf[1] = sdio_readb(rtwsdio->sdio_func, addr + 1, &ret);
> +               val = le16_to_cpu(*(__le16 *)buf);
> +       } else if (addr & 1) {
> +               ret = rtw_sdio_read_indirect_bytes(rtwdev, addr, buf, 2);
> +               val = le16_to_cpu(*(__le16 *)buf);
> +       } else {
> +               val = rtw_sdio_read_indirect32(rtwdev, addr, &ret);
> +       }
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev, "sdio read16 failed (0x%x): %d", addr, ret);
> +
> +       return val;
> +}
> +
> +static u32 rtw_sdio_read32(struct rtw_dev *rtwdev, u32 addr)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool direct, bus_claim;
> +       u8 buf[4];
> +       u32 val;
> +       int ret;
> +
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +       direct = rtw_sdio_is_bus_addr(addr);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       if (direct) {
> +               addr = rtw_sdio_to_bus_offset(rtwdev, addr);
> +               val = rtw_sdio_readl(rtwsdio, addr, &ret);
> +       } else if (addr & 3) {
> +               ret = rtw_sdio_read_indirect_bytes(rtwdev, addr, buf, 4);
> +               val = le32_to_cpu(*(__le32 *)buf);
> +       } else {
> +               val = rtw_sdio_read_indirect32(rtwdev, addr, &ret);
> +       }
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev, "sdio read32 failed (0x%x): %d", addr, ret);
> +
> +       return val;
> +}
> +
> +static u32 rtw_sdio_to_write_address(struct rtw_dev *rtwdev, u32 addr)
> +{
> +       if (!rtw_sdio_is_bus_addr(addr))
> +               addr |= WLAN_IOREG_OFFSET;
> +
> +       return rtw_sdio_to_bus_offset(rtwdev, addr);
> +}
> +
> +static void rtw_sdio_write8(struct rtw_dev *rtwdev, u32 addr, u8 val)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool bus_claim;
> +       int ret;
> +
> +       addr = rtw_sdio_to_write_address(rtwdev, addr);
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       sdio_writeb(rtwsdio->sdio_func, val, addr, &ret);
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev, "sdio write8 failed (0x%x): %d", addr, ret);
> +}
> +
> +static void rtw_sdio_write16(struct rtw_dev *rtwdev, u32 addr, u16 val)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool bus_claim;
> +       int ret;
> +
> +       addr = rtw_sdio_to_write_address(rtwdev, addr);
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       sdio_writeb(rtwsdio->sdio_func, val, addr, &ret);
> +       if (!ret)
> +               sdio_writeb(rtwsdio->sdio_func, val >> 8, addr + 1, &ret);
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev, "sdio write16 failed (0x%x): %d", addr, ret);
> +}
> +
> +static void rtw_sdio_write32(struct rtw_dev *rtwdev, u32 addr, u32 val)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool bus_claim;
> +       int ret;
> +
> +       addr = rtw_sdio_to_write_address(rtwdev, addr);
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       rtw_sdio_writel(rtwsdio, val, addr, &ret);
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev, "sdio write32 failed (0x%x): %d", addr, ret);
> +}
> +
> +static u32 rtw_sdio_get_tx_addr(struct rtw_dev *rtwdev, size_t size,
> +                               enum rtw_tx_queue_type queue)
> +{
> +       u32 txaddr;
> +
> +       switch (queue) {
> +       case RTW_TX_QUEUE_BCN:
> +       case RTW_TX_QUEUE_H2C:
> +       case RTW_TX_QUEUE_HI0:
> +               txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
> +                                   REG_SDIO_CMD_ADDR_TXFF_HIGH);
> +               break;
> +       case RTW_TX_QUEUE_VI:
> +       case RTW_TX_QUEUE_VO:
> +               txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
> +                                   REG_SDIO_CMD_ADDR_TXFF_NORMAL);
> +               break;
> +       case RTW_TX_QUEUE_BE:
> +       case RTW_TX_QUEUE_BK:
> +               txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
> +                                   REG_SDIO_CMD_ADDR_TXFF_LOW);
> +               break;
> +       case RTW_TX_QUEUE_MGMT:
> +               txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
> +                                   REG_SDIO_CMD_ADDR_TXFF_EXTRA);
> +               break;
> +       default:
> +               rtw_warn(rtwdev, "Unsupported queue for TX addr: 0x%02x\n",
> +                        queue);
> +               return 0;
> +       }
> +
> +       txaddr += DIV_ROUND_UP(size, 4);
> +
> +       return txaddr;
> +};
> +
> +static int rtw_sdio_read_port(struct rtw_dev *rtwdev, u8 *buf, size_t count)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       u32 rxaddr = rtwsdio->rx_addr++;
> +       int ret;
> +
> +       ret = sdio_memcpy_fromio(rtwsdio->sdio_func, buf,
> +                                RTW_SDIO_ADDR_RX_RX0FF_GEN(rxaddr), count);
> +       if (ret)
> +               rtw_warn(rtwdev,
> +                        "Failed to read %lu byte(s) from SDIO port 0x%08x",
> +                        count, rxaddr);
> +
> +       return ret;
> +}
> +
> +static int rtw_sdio_check_free_txpg(struct rtw_dev *rtwdev, u8 queue,
> +                                   size_t count)
> +{
> +       unsigned int pages_free, pages_needed;
> +
> +       if (rtw_chip_wcpu_11n(rtwdev)) {
> +               u32 free_txpg;
> +
> +               free_txpg = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG);
> +
> +               switch (queue) {
> +               case RTW_TX_QUEUE_BCN:
> +               case RTW_TX_QUEUE_H2C:
> +               case RTW_TX_QUEUE_HI0:
> +               case RTW_TX_QUEUE_MGMT:
> +                       /* high */
> +                       pages_free = free_txpg & 0xff;
> +                       break;
> +               case RTW_TX_QUEUE_VI:
> +               case RTW_TX_QUEUE_VO:
> +                       /* normal */
> +                       pages_free = (free_txpg >> 8) & 0xff;
> +                       break;
> +               case RTW_TX_QUEUE_BE:
> +               case RTW_TX_QUEUE_BK:
> +                       /* low */
> +                       pages_free = (free_txpg >> 16) & 0xff;
> +                       break;
> +               default:
> +                       rtw_warn(rtwdev, "Unknown mapping for queue %u\n", queue);
> +                       break;
> +               }
> +
> +               /* add the pages from the public queue */
> +               pages_free += (free_txpg >> 24) & 0xff;
> +       } else {
> +               u32 free_txpg[3];
> +
> +               free_txpg[0] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG);
> +               free_txpg[1] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 4);
> +               free_txpg[2] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 8);
> +
> +               switch (queue) {
> +               case RTW_TX_QUEUE_BCN:
> +               case RTW_TX_QUEUE_H2C:
> +               case RTW_TX_QUEUE_HI0:
> +                       /* high */
> +                       pages_free = free_txpg[0] & 0xfff;
> +                       break;
> +               case RTW_TX_QUEUE_VI:
> +               case RTW_TX_QUEUE_VO:
> +                       /* normal */
> +                       pages_free = (free_txpg[0] >> 16) & 0xfff;
> +                       break;
> +               case RTW_TX_QUEUE_BE:
> +               case RTW_TX_QUEUE_BK:
> +                       /* low */
> +                       pages_free = free_txpg[1] & 0xfff;
> +                       break;
> +               case RTW_TX_QUEUE_MGMT:
> +                       /* extra */
> +                       pages_free = free_txpg[2] & 0xfff;
> +                       break;
> +               default:
> +                       rtw_warn(rtwdev, "Unknown mapping for queue %u\n", queue);
> +                       return -EINVAL;
> +               }
> +
> +               /* add the pages from the public queue */
> +               pages_free += (free_txpg[1] >> 16) & 0xfff;
> +       }
> +
> +       pages_needed = DIV_ROUND_UP(count, rtwdev->chip->page_size);
> +
> +       if (pages_needed > pages_free) {
> +               rtw_dbg(rtwdev, RTW_DBG_SDIO,
> +                       "Not enough free pages (%u needed, %u free) in queue %u for %zu bytes\n",
> +                       pages_needed, pages_free, queue, count);
> +               return -EBUSY;
> +       }
> +
> +       return 0;
> +}
> +
> +static int rtw_sdio_write_port(struct rtw_dev *rtwdev, struct sk_buff *skb,
> +                              enum rtw_tx_queue_type queue)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool bus_claim;
> +       size_t txsize;
> +       u32 txaddr;
> +       int ret;
> +
> +       txaddr = rtw_sdio_get_tx_addr(rtwdev, skb->len, queue);
> +       if (!txaddr)
> +               return -EINVAL;
> +
> +       txsize = sdio_align_size(rtwsdio->sdio_func, skb->len);
> +
> +       ret = rtw_sdio_check_free_txpg(rtwdev, queue, txsize);
> +       if (ret)
> +               return ret;
> +
> +       if (!IS_ALIGNED((unsigned long)skb->data, RTW_SDIO_DATA_PTR_ALIGN))
> +               rtw_warn(rtwdev, "Got unaligned SKB in %s() for queue %u\n",
> +                        __func__, queue);
> +
> +       bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
> +
> +       if (bus_claim)
> +               sdio_claim_host(rtwsdio->sdio_func);
> +
> +       ret = sdio_memcpy_toio(rtwsdio->sdio_func, txaddr, skb->data, txsize);
> +
> +       if (bus_claim)
> +               sdio_release_host(rtwsdio->sdio_func);
> +
> +       if (ret)
> +               rtw_warn(rtwdev,
> +                        "Failed to write %lu byte(s) to SDIO port 0x%08x",
> +                        txsize, txaddr);
> +
> +       return ret;
> +}
> +
> +static void rtw_sdio_init(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +
> +       rtwsdio->irq_mask = REG_SDIO_HIMR_RX_REQUEST | REG_SDIO_HIMR_CPWM1;
> +}
> +
> +static void rtw_sdio_rx_aggregation(struct rtw_dev *rtwdev, bool enable)
> +{
> +       u8 size, timeout;
> +
> +       if (enable) {
> +               if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C) {
> +                       size = 0xff;
> +                       timeout = 0x20;
> +               } else {
> +                       size = 0x6;
> +                       timeout = 0x6;
> +               }
> +
> +               /* Make the firmware honor the size limit configured below */
> +               rtw_write32_set(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
> +
> +               rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
> +
> +               rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, size |
> +                           (timeout << BIT_SHIFT_DMA_AGG_TO_V1));
> +
> +               rtw_write8_set(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE);
> +       } else {
> +               rtw_write32_clr(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
> +               rtw_write8_clr(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
> +               rtw_write8_clr(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE);
> +       }
> +}
> +
> +static void rtw_sdio_enable_interrupt(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +
> +       rtw_write32(rtwdev, REG_SDIO_HIMR, rtwsdio->irq_mask);
> +}
> +
> +static void rtw_sdio_disable_interrupt(struct rtw_dev *rtwdev)
> +{
> +       rtw_write32(rtwdev, REG_SDIO_HIMR, 0x0);
> +}
> +
> +static u8 rtw_sdio_get_tx_qsel(struct rtw_dev *rtwdev, struct sk_buff *skb,
> +                              u8 queue)
> +{
> +       switch (queue) {
> +       case RTW_TX_QUEUE_BCN:
> +               return TX_DESC_QSEL_BEACON;
> +       case RTW_TX_QUEUE_H2C:
> +               return TX_DESC_QSEL_H2C;
> +       case RTW_TX_QUEUE_MGMT:
> +               if (rtw_chip_wcpu_11n(rtwdev))
> +                       return TX_DESC_QSEL_HIGH;
> +               else
> +                       return TX_DESC_QSEL_MGMT;
> +       case RTW_TX_QUEUE_HI0:
> +               return TX_DESC_QSEL_HIGH;
> +       default:
> +               return skb->priority;
> +       }
> +};
> +
> +static int rtw_sdio_setup(struct rtw_dev *rtwdev)
> +{
> +       /* nothing to do */
> +       return 0;
> +}
> +
> +static int rtw_sdio_start(struct rtw_dev *rtwdev)
> +{
> +       rtw_sdio_rx_aggregation(rtwdev, false);
> +       rtw_sdio_enable_interrupt(rtwdev);
> +
> +       return 0;
> +}
> +
> +static void rtw_sdio_stop(struct rtw_dev *rtwdev)
> +{
> +       rtw_sdio_disable_interrupt(rtwdev);
> +}
> +
> +static void rtw_sdio_deep_ps_enter(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool tx_empty = true;
> +       u8 queue;
> +
> +       if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_TX_WAKE)) {
> +               /* Deep PS state is not allowed to TX-DMA */
> +               for (queue = 0; queue < RTK_MAX_TX_QUEUE_NUM; queue++) {
> +                       /* BCN queue is rsvd page, does not have DMA interrupt
> +                        * H2C queue is managed by firmware
> +                        */
> +                       if (queue == RTW_TX_QUEUE_BCN ||
> +                           queue == RTW_TX_QUEUE_H2C)
> +                               continue;
> +
> +                       /* check if there is any skb DMAing */
> +                       if (skb_queue_len(&rtwsdio->tx_queue[queue])) {
> +                               tx_empty = false;
> +                               break;
> +                       }
> +               }
> +       }
> +
> +       if (!tx_empty) {
> +               rtw_dbg(rtwdev, RTW_DBG_PS,
> +                       "TX path not empty, cannot enter deep power save state\n");
> +               return;
> +       }
> +
> +       set_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags);
> +       rtw_power_mode_change(rtwdev, true);
> +}
> +
> +static void rtw_sdio_deep_ps_leave(struct rtw_dev *rtwdev)
> +{
> +       if (test_and_clear_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags))
> +               rtw_power_mode_change(rtwdev, false);
> +}
> +
> +static void rtw_sdio_deep_ps(struct rtw_dev *rtwdev, bool enter)
> +{
> +       if (enter && !test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags))
> +               rtw_sdio_deep_ps_enter(rtwdev);
> +
> +       if (!enter && test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags))
> +               rtw_sdio_deep_ps_leave(rtwdev);
> +}
> +
> +static void rtw_sdio_tx_kick_off(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +
> +       queue_work(rtwsdio->txwq, &rtwsdio->tx_handler_data->work);
> +}
> +
> +static void rtw_sdio_link_ps(struct rtw_dev *rtwdev, bool enter)
> +{
> +       /* nothing to do */
> +}
> +
> +static void rtw_sdio_interface_cfg(struct rtw_dev *rtwdev)
> +{
> +       u32 val;
> +
> +       rtw_read32(rtwdev, REG_SDIO_FREE_TXPG);
> +
> +       val = rtw_read32(rtwdev, REG_SDIO_TX_CTRL);
> +       val &= 0xfff8;
> +       rtw_write32(rtwdev, REG_SDIO_TX_CTRL, val);
> +}
> +
> +static void rtw_sdio_power_switch(struct rtw_dev *rtwdev, bool on)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +
> +       rtwsdio->is_powered_on = on;
> +}
> +
> +static struct rtw_sdio_tx_data *rtw_sdio_get_tx_data(struct sk_buff *skb)
> +{
> +       struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> +
> +       BUILD_BUG_ON(sizeof(struct rtw_sdio_tx_data) >
> +                    sizeof(info->status.status_driver_data));
> +
> +       return (struct rtw_sdio_tx_data *)info->status.status_driver_data;
> +}
> +
> +static void rtw_sdio_tx_skb_prepare(struct rtw_dev *rtwdev,
> +                                   struct rtw_tx_pkt_info *pkt_info,
> +                                   struct sk_buff *skb,
> +                                   enum rtw_tx_queue_type queue)
> +{
> +       const struct rtw_chip_info *chip = rtwdev->chip;
> +       unsigned long data_addr, aligned_addr;
> +       size_t offset;
> +       u8 *pkt_desc;
> +
> +       pkt_desc = skb_push(skb, chip->tx_pkt_desc_sz);
> +
> +       data_addr = (unsigned long)pkt_desc;
> +       aligned_addr = ALIGN(data_addr, RTW_SDIO_DATA_PTR_ALIGN);
> +
> +       if (data_addr != aligned_addr) {
> +               /* Ensure that the start of the pkt_desc is always aligned at
> +                * RTW_SDIO_DATA_PTR_ALIGN.
> +                */
> +               offset = RTW_SDIO_DATA_PTR_ALIGN - (aligned_addr - data_addr);
> +
> +               pkt_desc = skb_push(skb, offset);
> +
> +               /* By inserting padding to align the start of the pkt_desc we
> +                * need to inform the firmware that the actual data starts at
> +                * a different offset than normal.
> +                */
> +               pkt_info->offset += offset;
> +       }
> +
> +       memset(pkt_desc, 0, chip->tx_pkt_desc_sz);
> +
> +       pkt_info->qsel = rtw_sdio_get_tx_qsel(rtwdev, skb, queue);
> +
> +       rtw_tx_fill_tx_desc(pkt_info, skb);
> +       chip->ops->fill_txdesc_checksum(rtwdev, pkt_info, pkt_desc);
> +}
> +
> +static int rtw_sdio_write_data(struct rtw_dev *rtwdev,
> +                              struct rtw_tx_pkt_info *pkt_info,
> +                              struct sk_buff *skb,
> +                              enum rtw_tx_queue_type queue)
> +{
> +       int ret;
> +
> +       rtw_sdio_tx_skb_prepare(rtwdev, pkt_info, skb, queue);
> +
> +       ret = rtw_sdio_write_port(rtwdev, skb, queue);
> +       dev_kfree_skb_any(skb);
> +
> +       return ret;
> +}
> +
> +static int rtw_sdio_write_data_rsvd_page(struct rtw_dev *rtwdev, u8 *buf,
> +                                        u32 size)
> +{
> +       struct rtw_tx_pkt_info pkt_info = {};
> +       struct sk_buff *skb;
> +
> +       skb = rtw_tx_write_data_rsvd_page_get(rtwdev, &pkt_info, buf, size);
> +       if (!skb)
> +               return -ENOMEM;
> +
> +       return rtw_sdio_write_data(rtwdev, &pkt_info, skb, RTW_TX_QUEUE_BCN);
> +}
> +
> +static int rtw_sdio_write_data_h2c(struct rtw_dev *rtwdev, u8 *buf, u32 size)
> +{
> +       struct rtw_tx_pkt_info pkt_info = {};
> +       struct sk_buff *skb;
> +
> +       skb = rtw_tx_write_data_h2c_get(rtwdev, &pkt_info, buf, size);
> +       if (!skb)
> +               return -ENOMEM;
> +
> +       return rtw_sdio_write_data(rtwdev, &pkt_info, skb, RTW_TX_QUEUE_H2C);
> +}
> +
> +static int rtw_sdio_tx_write(struct rtw_dev *rtwdev,
> +                            struct rtw_tx_pkt_info *pkt_info,
> +                            struct sk_buff *skb)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       enum rtw_tx_queue_type queue = rtw_tx_queue_mapping(skb);
> +       struct rtw_sdio_tx_data *tx_data;
> +
> +       rtw_sdio_tx_skb_prepare(rtwdev, pkt_info, skb, queue);
> +
> +       tx_data = rtw_sdio_get_tx_data(skb);
> +       tx_data->sn = pkt_info->sn;
> +
> +       skb_queue_tail(&rtwsdio->tx_queue[queue], skb);
> +
> +       return 0;
> +}
> +
> +static void rtw_sdio_tx_err_isr(struct rtw_dev *rtwdev)
> +{
> +       u32 val = rtw_read32(rtwdev, REG_TXDMA_STATUS);
> +
> +       rtw_write32(rtwdev, REG_TXDMA_STATUS, val);
> +}
> +
> +static void rtw_sdio_rx_skb(struct rtw_dev *rtwdev, struct sk_buff *skb,
> +                           u32 pkt_offset, struct rtw_rx_pkt_stat *pkt_stat,
> +                           struct ieee80211_rx_status *rx_status)
> +{
> +       memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
> +
> +       if (pkt_stat->is_c2h) {
> +               skb_put(skb, pkt_stat->pkt_len + pkt_offset);
> +               rtw_fw_c2h_cmd_rx_irqsafe(rtwdev, pkt_offset, skb);
> +               return;
> +       }
> +
> +       skb_put(skb, pkt_stat->pkt_len);
> +       skb_reserve(skb, pkt_offset);
> +
> +       rtw_rx_stats(rtwdev, pkt_stat->vif, skb);
> +
> +       ieee80211_rx_irqsafe(rtwdev->hw, skb);
> +}
> +
> +static void rtw_sdio_rxfifo_recv(struct rtw_dev *rtwdev, u32 rx_len)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       const struct rtw_chip_info *chip = rtwdev->chip;
> +       u32 pkt_desc_sz = chip->rx_pkt_desc_sz;
> +       struct ieee80211_rx_status rx_status;
> +       struct rtw_rx_pkt_stat pkt_stat;
> +       struct sk_buff *skb, *split_skb;
> +       u32 pkt_offset, curr_pkt_len;
> +       size_t bufsz;
> +       u8 *rx_desc;
> +       int ret;
> +
> +       bufsz = sdio_align_size(rtwsdio->sdio_func, rx_len);
> +
> +       skb = dev_alloc_skb(bufsz);
> +       if (!skb)
> +               return;
> +
> +       ret = rtw_sdio_read_port(rtwdev, skb->data, bufsz);
> +       if (ret) {
> +               dev_kfree_skb_any(skb);
> +               return;
> +       }
> +
> +       while (true) {
> +               rx_desc = skb->data;
> +               chip->ops->query_rx_desc(rtwdev, rx_desc, &pkt_stat,
> +                                        &rx_status);
> +               pkt_offset = pkt_desc_sz + pkt_stat.drv_info_sz +
> +                            pkt_stat.shift;
> +
> +               curr_pkt_len = ALIGN(pkt_offset + pkt_stat.pkt_len,
> +                                    RTW_SDIO_DATA_PTR_ALIGN);
> +
> +               if ((curr_pkt_len + pkt_desc_sz) >= rx_len) {
> +                       /* Use the original skb (with it's adjusted offset)
> +                        * when processing the last (or even the only) entry to
> +                        * have it's memory freed automatically.
> +                        */
> +                       rtw_sdio_rx_skb(rtwdev, skb, pkt_offset, &pkt_stat,
> +                                       &rx_status);
> +                       break;
> +               }
> +
> +               split_skb = dev_alloc_skb(curr_pkt_len);
> +               if (!split_skb) {
> +                       rtw_sdio_rx_skb(rtwdev, skb, pkt_offset, &pkt_stat,
> +                                       &rx_status);
> +                       break;
> +               }
> +
> +               skb_copy_header(split_skb, skb);
> +               memcpy(split_skb->data, skb->data, curr_pkt_len);
> +
> +               rtw_sdio_rx_skb(rtwdev, split_skb, pkt_offset, &pkt_stat,
> +                               &rx_status);
> +
> +               /* Move to the start of the next RX descriptor */
> +               skb_reserve(skb, curr_pkt_len);
> +               rx_len -= curr_pkt_len;
> +       }
> +}
> +
> +static void rtw_sdio_rx_isr(struct rtw_dev *rtwdev)
> +{
> +       u32 rx_len;
> +
> +       while (true) {
> +               if (rtw_chip_wcpu_11n(rtwdev))
> +                       rx_len = rtw_read16(rtwdev, REG_SDIO_RX0_REQ_LEN);
> +               else
> +                       rx_len = rtw_read32(rtwdev, REG_SDIO_RX0_REQ_LEN);
> +
> +               if (!rx_len)
> +                       break;
> +
> +               rtw_sdio_rxfifo_recv(rtwdev, rx_len);
> +       }
> +}
> +
> +static void rtw_sdio_handle_interrupt(struct sdio_func *sdio_func)
> +{
> +       struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func);
> +       struct rtw_dev *rtwdev = hw->priv;
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       u32 hisr;
> +
> +       rtwsdio->irq_thread = current;
> +
> +       hisr = rtw_read32(rtwdev, REG_SDIO_HISR);
> +
> +       if (hisr & REG_SDIO_HISR_TXERR)
> +               rtw_sdio_tx_err_isr(rtwdev);
> +       if (hisr & REG_SDIO_HISR_RX_REQUEST) {
> +               hisr &= ~REG_SDIO_HISR_RX_REQUEST;
> +               rtw_sdio_rx_isr(rtwdev);
> +       }
> +
> +       rtw_write32(rtwdev, REG_SDIO_HISR, hisr);
> +
> +       rtwsdio->irq_thread = NULL;
> +}
> +
> +static int __maybe_unused rtw_sdio_suspend(struct device *dev)
> +{
> +       return 0;
> +}
> +
> +static int __maybe_unused rtw_sdio_resume(struct device *dev)
> +{
> +       return 0;
> +}
> +
> +SIMPLE_DEV_PM_OPS(rtw_sdio_pm_ops, rtw_sdio_suspend, rtw_sdio_resume);
> +EXPORT_SYMBOL(rtw_sdio_pm_ops);
> +
> +static int rtw_sdio_claim(struct rtw_dev *rtwdev, struct sdio_func *sdio_func)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       int ret;
> +
> +       sdio_claim_host(sdio_func);
> +
> +       ret = sdio_enable_func(sdio_func);
> +       if (ret) {
> +               rtw_err(rtwdev, "Failed to enable SDIO func");
> +               goto err_release_host;
> +       }
> +
> +       ret = sdio_set_block_size(sdio_func, RTW_SDIO_BLOCK_SIZE);
> +       if (ret) {
> +               rtw_err(rtwdev, "Failed to set SDIO block size to 512");
> +               goto err_disable_func;
> +       }
> +
> +       rtwsdio->sdio_func = sdio_func;
> +
> +       rtwsdio->sdio3_bus_mode = mmc_card_uhs(sdio_func->card);
> +
> +       sdio_set_drvdata(sdio_func, rtwdev->hw);
> +       SET_IEEE80211_DEV(rtwdev->hw, &sdio_func->dev);
> +
> +       sdio_release_host(sdio_func);
> +
> +       return 0;
> +
> +err_disable_func:
> +       sdio_disable_func(sdio_func);
> +err_release_host:
> +       sdio_release_host(sdio_func);
> +       return ret;
> +}
> +
> +static void rtw_sdio_declaim(struct rtw_dev *rtwdev,
> +                            struct sdio_func *sdio_func)
> +{
> +       sdio_claim_host(sdio_func);
> +       sdio_disable_func(sdio_func);
> +       sdio_release_host(sdio_func);
> +}
> +
> +static struct rtw_hci_ops rtw_sdio_ops = {
> +       .tx_write = rtw_sdio_tx_write,
> +       .tx_kick_off = rtw_sdio_tx_kick_off,
> +       .setup = rtw_sdio_setup,
> +       .start = rtw_sdio_start,
> +       .stop = rtw_sdio_stop,
> +       .deep_ps = rtw_sdio_deep_ps,
> +       .link_ps = rtw_sdio_link_ps,
> +       .interface_cfg = rtw_sdio_interface_cfg,
> +
> +       .power_switch = rtw_sdio_power_switch,
> +
> +       .read8 = rtw_sdio_read8,
> +       .read16 = rtw_sdio_read16,
> +       .read32 = rtw_sdio_read32,
> +       .write8 = rtw_sdio_write8,
> +       .write16 = rtw_sdio_write16,
> +       .write32 = rtw_sdio_write32,
> +       .write_data_rsvd_page = rtw_sdio_write_data_rsvd_page,
> +       .write_data_h2c = rtw_sdio_write_data_h2c,
> +};
> +
> +static int rtw_sdio_request_irq(struct rtw_dev *rtwdev,
> +                               struct sdio_func *sdio_func)
> +{
> +       int ret;
> +
> +       sdio_claim_host(sdio_func);
> +       ret = sdio_claim_irq(sdio_func, &rtw_sdio_handle_interrupt);
> +       sdio_release_host(sdio_func);
> +
> +       if (ret) {
> +               rtw_err(rtwdev, "failed to claim SDIO IRQ");
> +               return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +static void rtw_sdio_indicate_tx_status(struct rtw_dev *rtwdev,
> +                                       struct sk_buff *skb)
> +{
> +       struct rtw_sdio_tx_data *tx_data = rtw_sdio_get_tx_data(skb);
> +       struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> +       struct ieee80211_hw *hw = rtwdev->hw;
> +
> +       /* enqueue to wait for tx report */
> +       if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) {
> +               rtw_tx_report_enqueue(rtwdev, skb, tx_data->sn);
> +               return;
> +       }
> +
> +       /* always ACK for others, then they won't be marked as drop */
> +       ieee80211_tx_info_clear_status(info);
> +       if (info->flags & IEEE80211_TX_CTL_NO_ACK)
> +               info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED;
> +       else
> +               info->flags |= IEEE80211_TX_STAT_ACK;
> +
> +       ieee80211_tx_status_irqsafe(hw, skb);
> +}
> +
> +static void rtw_sdio_process_tx_queue(struct rtw_dev *rtwdev,
> +                                     enum rtw_tx_queue_type queue)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       struct sk_buff *skb;
> +       int ret;
> +
> +       while (true) {
> +               skb = skb_dequeue(&rtwsdio->tx_queue[queue]);
> +               if (!skb)
> +                       break;
> +
> +               ret = rtw_sdio_write_port(rtwdev, skb, queue);
> +               if (ret) {
> +                       skb_queue_head(&rtwsdio->tx_queue[queue], skb);
> +                       break;
> +               }
> +
> +               if (queue <= RTW_TX_QUEUE_VO)
> +                       rtw_sdio_indicate_tx_status(rtwdev, skb);
> +               else
> +                       dev_kfree_skb_any(skb);
> +       }
> +}
> +
> +static void rtw_sdio_tx_handler(struct work_struct *work)
> +{
> +       struct rtw_sdio_work_data *work_data =
> +               container_of(work, struct rtw_sdio_work_data, work);
> +       struct rtw_dev *rtwdev = work_data->rtwdev;
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       bool has_more_tx_data;
> +       int queue;
> +
> +       if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_TX_WAKE))
> +               rtw_sdio_deep_ps_leave(rtwdev);
> +
> +       do {
> +               has_more_tx_data = false;
> +
> +               for (queue = RTK_MAX_TX_QUEUE_NUM - 1; queue >= 0; queue--) {
> +                       rtw_sdio_process_tx_queue(rtwdev, queue);
> +
> +                       if (!skb_queue_empty(&rtwsdio->tx_queue[queue]))
> +                               has_more_tx_data = true;
> +               }
> +       } while (has_more_tx_data);
> +}
> +
> +static void rtw_sdio_free_irq(struct rtw_dev *rtwdev,
> +                             struct sdio_func *sdio_func)
> +{
> +       sdio_release_irq(sdio_func);
> +}
> +
> +static int rtw_sdio_init_tx(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       int i;
> +
> +       rtwsdio->txwq = create_singlethread_workqueue("rtw88_sdio: tx wq");
> +       if (!rtwsdio->txwq) {
> +               rtw_err(rtwdev, "failed to create TX work queue\n");
> +               return -ENOMEM;
> +       }
> +
> +       for (i = 0; i < RTK_MAX_TX_QUEUE_NUM; i++)
> +               skb_queue_head_init(&rtwsdio->tx_queue[i]);
> +       rtwsdio->tx_handler_data = kmalloc(sizeof(*rtwsdio->tx_handler_data),
> +                                          GFP_KERNEL);
> +       if (!rtwsdio->tx_handler_data)
> +               goto err_destroy_wq;
> +
> +       rtwsdio->tx_handler_data->rtwdev = rtwdev;
> +       INIT_WORK(&rtwsdio->tx_handler_data->work, rtw_sdio_tx_handler);
> +
> +       return 0;
> +
> +err_destroy_wq:
> +       destroy_workqueue(rtwsdio->txwq);
> +       return -ENOMEM;
> +}
> +
> +static void rtw_sdio_deinit_tx(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +       int i;
> +
> +       for (i = 0; i < RTK_MAX_TX_QUEUE_NUM; i++)
> +               skb_queue_purge(&rtwsdio->tx_queue[i]);
> +
> +       flush_workqueue(rtwsdio->txwq);
> +       destroy_workqueue(rtwsdio->txwq);
> +       kfree(rtwsdio->tx_handler_data);
> +}
> +
> +int rtw_sdio_probe(struct sdio_func *sdio_func,
> +                  const struct sdio_device_id *id)
> +{
> +       struct ieee80211_hw *hw;
> +       struct rtw_dev *rtwdev;
> +       int drv_data_size;
> +       int ret;
> +
> +       drv_data_size = sizeof(struct rtw_dev) + sizeof(struct rtw_sdio);
> +       hw = ieee80211_alloc_hw(drv_data_size, &rtw_ops);
> +       if (!hw) {
> +               dev_err(&sdio_func->dev, "failed to allocate hw");
> +               return -ENOMEM;
> +       }
> +
> +       rtwdev = hw->priv;
> +       rtwdev->hw = hw;
> +       rtwdev->dev = &sdio_func->dev;
> +       rtwdev->chip = (struct rtw_chip_info *)id->driver_data;
> +       rtwdev->hci.ops = &rtw_sdio_ops;
> +       rtwdev->hci.type = RTW_HCI_TYPE_SDIO;
> +
> +       ret = rtw_core_init(rtwdev);
> +       if (ret)
> +               goto err_release_hw;
> +
> +       rtw_dbg(rtwdev, RTW_DBG_SDIO,
> +               "rtw88 SDIO probe: vendor=0x%04x device=%04x class=%02x",
> +               id->vendor, id->device, id->class);
> +
> +       ret = rtw_sdio_claim(rtwdev, sdio_func);
> +       if (ret) {
> +               rtw_err(rtwdev, "failed to claim SDIO device");
> +               goto err_deinit_core;
> +       }
> +
> +       rtw_sdio_init(rtwdev);
> +
> +       ret = rtw_sdio_init_tx(rtwdev);
> +       if (ret) {
> +               rtw_err(rtwdev, "failed to init SDIO TX queue\n");
> +               goto err_sdio_declaim;
> +       }
> +
> +       ret = rtw_chip_info_setup(rtwdev);
> +       if (ret) {
> +               rtw_err(rtwdev, "failed to setup chip information");
> +               goto err_destroy_txwq;
> +       }
> +
> +       ret = rtw_register_hw(rtwdev, hw);
> +       if (ret) {
> +               rtw_err(rtwdev, "failed to register hw");
> +               goto err_destroy_txwq;
> +       }
> +
> +       ret = rtw_sdio_request_irq(rtwdev, sdio_func);
> +       if (ret)
> +               goto err_unregister_hw;
> +
> +       return 0;
> +
> +err_unregister_hw:
> +       rtw_unregister_hw(rtwdev, hw);
> +err_destroy_txwq:
> +       rtw_sdio_deinit_tx(rtwdev);
> +err_sdio_declaim:
> +       rtw_sdio_declaim(rtwdev, sdio_func);
> +err_deinit_core:
> +       rtw_core_deinit(rtwdev);
> +err_release_hw:
> +       ieee80211_free_hw(hw);
> +
> +       return ret;
> +}
> +EXPORT_SYMBOL(rtw_sdio_probe);
> +
> +void rtw_sdio_remove(struct sdio_func *sdio_func)
> +{
> +       struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func);
> +       struct rtw_dev *rtwdev;
> +
> +       if (!hw)
> +               return;
> +
> +       rtwdev = hw->priv;
> +
> +       rtw_unregister_hw(rtwdev, hw);
> +       rtw_sdio_disable_interrupt(rtwdev);
> +       rtw_sdio_declaim(rtwdev, sdio_func);
> +       rtw_sdio_free_irq(rtwdev, sdio_func);
> +       rtw_sdio_deinit_tx(rtwdev);
> +       rtw_core_deinit(rtwdev);
> +       ieee80211_free_hw(hw);
> +}
> +EXPORT_SYMBOL(rtw_sdio_remove);
> +
> +void rtw_sdio_shutdown(struct device *dev)
> +{
> +       struct sdio_func *sdio_func = dev_to_sdio_func(dev);
> +       struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func);
> +       const struct rtw_chip_info *chip;
> +       struct rtw_dev *rtwdev;
> +
> +       if (!hw)
> +               return;
> +
> +       rtwdev = hw->priv;
> +       chip = rtwdev->chip;
> +
> +       if (chip->ops->shutdown)
> +               chip->ops->shutdown(rtwdev);
> +}
> +EXPORT_SYMBOL(rtw_sdio_shutdown);
> +
> +MODULE_AUTHOR("Martin Blumenstingl");
> +MODULE_AUTHOR("Jernej Skrabec");
> +MODULE_DESCRIPTION("Realtek 802.11ac wireless SDIO driver");
> +MODULE_LICENSE("Dual BSD/GPL");
> diff --git a/drivers/net/wireless/realtek/rtw88/sdio.h b/drivers/net/wireless/realtek/rtw88/sdio.h
> new file mode 100644
> index 000000000000..7339e35f808a
> --- /dev/null
> +++ b/drivers/net/wireless/realtek/rtw88/sdio.h
> @@ -0,0 +1,175 @@
> +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
> +/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> + * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
> + */
> +
> +#ifndef __REG_SDIO_H_
> +#define __REG_SDIO_H_
> +
> +#include "main.h"
> +
> +/* I/O bus domain address mapping */
> +#define SDIO_LOCAL_OFFSET                      0x10250000
> +#define WLAN_IOREG_OFFSET                      0x10260000
> +#define FIRMWARE_FIFO_OFFSET                   0x10270000
> +#define TX_HIQ_OFFSET                          0x10310000
> +#define TX_MIQ_OFFSET                          0x10320000
> +#define TX_LOQ_OFFSET                          0x10330000
> +#define TX_EPQ_OFFSET                          0x10350000
> +#define RX_RX0FF_OFFSET                                0x10340000
> +
> +#define RTW_SDIO_BUS_MSK                       0xffff0000
> +#define SDIO_LOCAL_REG_MSK                     0x00000fff
> +#define WLAN_IOREG_REG_MSK                     0x0000ffff
> +
> +/* SDIO Tx Control */
> +#define REG_SDIO_TX_CTRL                       (SDIO_LOCAL_OFFSET + 0x0000)
> +
> +/*SDIO status timeout*/
> +#define REG_SDIO_TIMEOUT                       (SDIO_LOCAL_OFFSET + 0x0002)
> +
> +/* SDIO Host Interrupt Mask */
> +#define REG_SDIO_HIMR                          (SDIO_LOCAL_OFFSET + 0x0014)
> +#define REG_SDIO_HIMR_RX_REQUEST               BIT(0)
> +#define REG_SDIO_HIMR_AVAL                     BIT(1)
> +#define REG_SDIO_HIMR_TXERR                    BIT(2)
> +#define REG_SDIO_HIMR_RXERR                    BIT(3)
> +#define REG_SDIO_HIMR_TXFOVW                   BIT(4)
> +#define REG_SDIO_HIMR_RXFOVW                   BIT(5)
> +#define REG_SDIO_HIMR_TXBCNOK                  BIT(6)
> +#define REG_SDIO_HIMR_TXBCNERR                 BIT(7)
> +#define REG_SDIO_HIMR_BCNERLY_INT              BIT(16)
> +#define REG_SDIO_HIMR_C2HCMD                   BIT(17)
> +#define REG_SDIO_HIMR_CPWM1                    BIT(18)
> +#define REG_SDIO_HIMR_CPWM2                    BIT(19)
> +#define REG_SDIO_HIMR_HSISR_IND                        BIT(20)
> +#define REG_SDIO_HIMR_GTINT3_IND               BIT(21)
> +#define REG_SDIO_HIMR_GTINT4_IND               BIT(22)
> +#define REG_SDIO_HIMR_PSTIMEOUT                        BIT(23)
> +#define REG_SDIO_HIMR_OCPINT                   BIT(24)
> +#define REG_SDIO_HIMR_ATIMEND                  BIT(25)
> +#define REG_SDIO_HIMR_ATIMEND_E                        BIT(26)
> +#define REG_SDIO_HIMR_CTWEND                   BIT(27)
> +/* the following two are RTL8188 SDIO Specific */
> +#define REG_SDIO_HIMR_MCU_ERR                  BIT(28)
> +#define REG_SDIO_HIMR_TSF_BIT32_TOGGLE         BIT(29)
> +
> +/* SDIO Host Interrupt Service Routine */
> +#define REG_SDIO_HISR                          (SDIO_LOCAL_OFFSET + 0x0018)
> +#define REG_SDIO_HISR_RX_REQUEST               BIT(0)
> +#define REG_SDIO_HISR_AVAL                     BIT(1)
> +#define REG_SDIO_HISR_TXERR                    BIT(2)
> +#define REG_SDIO_HISR_RXERR                    BIT(3)
> +#define REG_SDIO_HISR_TXFOVW                   BIT(4)
> +#define REG_SDIO_HISR_RXFOVW                   BIT(5)
> +#define REG_SDIO_HISR_TXBCNOK                  BIT(6)
> +#define REG_SDIO_HISR_TXBCNERR                 BIT(7)
> +#define REG_SDIO_HISR_BCNERLY_INT              BIT(16)
> +#define REG_SDIO_HISR_C2HCMD                   BIT(17)
> +#define REG_SDIO_HISR_CPWM1                    BIT(18)
> +#define REG_SDIO_HISR_CPWM2                    BIT(19)
> +#define REG_SDIO_HISR_HSISR_IND                        BIT(20)
> +#define REG_SDIO_HISR_GTINT3_IND               BIT(21)
> +#define REG_SDIO_HISR_GTINT4_IND               BIT(22)
> +#define REG_SDIO_HISR_PSTIMEOUT                        BIT(23)
> +#define REG_SDIO_HISR_OCPINT                   BIT(24)
> +#define REG_SDIO_HISR_ATIMEND                  BIT(25)
> +#define REG_SDIO_HISR_ATIMEND_E                        BIT(26)
> +#define REG_SDIO_HISR_CTWEND                   BIT(27)
> +/* the following two are RTL8188 SDIO Specific */
> +#define REG_SDIO_HISR_MCU_ERR                  BIT(28)
> +#define REG_SDIO_HISR_TSF_BIT32_TOGGLE         BIT(29)
> +
> +/* HCI Current Power Mode */
> +#define REG_SDIO_HCPWM                         (SDIO_LOCAL_OFFSET + 0x0019)
> +/* RXDMA Request Length */
> +#define REG_SDIO_RX0_REQ_LEN                   (SDIO_LOCAL_OFFSET + 0x001C)
> +/* OQT Free Page */
> +#define REG_SDIO_OQT_FREE_PG                   (SDIO_LOCAL_OFFSET + 0x001E)
> +/* Free Tx Buffer Page */
> +#define REG_SDIO_FREE_TXPG                     (SDIO_LOCAL_OFFSET + 0x0020)
> +/* HCI Current Power Mode 1 */
> +#define REG_SDIO_HCPWM1                                (SDIO_LOCAL_OFFSET + 0x0024)
> +/* HCI Current Power Mode 2 */
> +#define REG_SDIO_HCPWM2                                (SDIO_LOCAL_OFFSET + 0x0026)
> +/* Free Tx Page Sequence */
> +#define REG_SDIO_FREE_TXPG_SEQ                 (SDIO_LOCAL_OFFSET + 0x0028)
> +/* HTSF Informaion */
> +#define REG_SDIO_HTSFR_INFO                    (SDIO_LOCAL_OFFSET + 0x0030)
> +#define REG_SDIO_HCPWM1_V2                     (SDIO_LOCAL_OFFSET + 0x0038)
> +/* H2C */
> +#define REG_SDIO_H2C                           (SDIO_LOCAL_OFFSET + 0x0060)
> +/* HCI Request Power Mode 1 */
> +#define REG_SDIO_HRPWM1                                (SDIO_LOCAL_OFFSET + 0x0080)
> +/* HCI Request Power Mode 2 */
> +#define REG_SDIO_HRPWM2                                (SDIO_LOCAL_OFFSET + 0x0082)
> +/* HCI Power Save Clock */
> +#define REG_SDIO_HPS_CLKR                      (SDIO_LOCAL_OFFSET + 0x0084)
> +/* SDIO HCI Suspend Control */
> +#define REG_SDIO_HSUS_CTRL                     (SDIO_LOCAL_OFFSET + 0x0086)
> +/* SDIO Host Extension Interrupt Mask Always */
> +#define REG_SDIO_HIMR_ON                       (SDIO_LOCAL_OFFSET + 0x0090)
> +/* SDIO Host Extension Interrupt Status Always */
> +#define REG_SDIO_HISR_ON                       (SDIO_LOCAL_OFFSET + 0x0091)
> +
> +#define REG_SDIO_INDIRECT_REG_CFG              (SDIO_LOCAL_OFFSET + 0x0040)
> +#define REG_SDIO_INDIRECT_REG_DATA             (SDIO_LOCAL_OFFSET + 0x0044)
> +
> +/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */
> +#define REG_SDIO_CMD_ADDR_MSK                  GENMASK(16, 13)
> +#define REG_SDIO_CMD_ADDR_SDIO_REG             0
> +#define REG_SDIO_CMD_ADDR_MAC_REG              8
> +#define REG_SDIO_CMD_ADDR_TXFF_HIGH            4
> +#define REG_SDIO_CMD_ADDR_TXFF_LOW             6
> +#define REG_SDIO_CMD_ADDR_TXFF_NORMAL          5
> +#define REG_SDIO_CMD_ADDR_TXFF_EXTRA           7
> +#define REG_SDIO_CMD_ADDR_RXFF                 7
> +
> +#define RTW_SDIO_BLOCK_SIZE                    512
> +#define RTW_SDIO_ADDR_RX_RX0FF_GEN(_id)                (0x0e000 | ((_id) & 0x3))
> +
> +#define RTW_SDIO_DATA_PTR_ALIGN                        8
> +
> +struct sdio_func;
> +struct sdio_device_id;
> +
> +struct rtw_sdio_tx_data {
> +       u8 sn;
> +};
> +
> +struct rtw_sdio_work_data {
> +       struct work_struct work;
> +       struct rtw_dev *rtwdev;
> +};
> +
> +struct rtw_sdio {
> +       struct sdio_func *sdio_func;
> +
> +       u32 irq_mask;
> +       u8 rx_addr;
> +       bool sdio3_bus_mode;
> +       bool is_powered_on;
> +
> +       void *irq_thread;
> +
> +       struct workqueue_struct *txwq;
> +
> +       struct sk_buff_head tx_queue[RTK_MAX_TX_QUEUE_NUM];
> +       struct rtw_sdio_work_data *tx_handler_data;
> +};
> +
> +extern const struct dev_pm_ops rtw_sdio_pm_ops;
> +
> +int rtw_sdio_probe(struct sdio_func *sdio_func,
> +                  const struct sdio_device_id *id);
> +void rtw_sdio_remove(struct sdio_func *sdio_func);
> +void rtw_sdio_shutdown(struct device *dev);
> +
> +static inline bool rtw_sdio_is_sdio30_supported(struct rtw_dev *rtwdev)
> +{
> +       struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
> +
> +       return rtwsdio->sdio3_bus_mode;
> +}
> +
> +#endif
> --
> 2.39.0
>
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig
index 651ab56d9c6b..cdf9cb478ee2 100644
--- a/drivers/net/wireless/realtek/rtw88/Kconfig
+++ b/drivers/net/wireless/realtek/rtw88/Kconfig
@@ -16,6 +16,9 @@  config RTW88_CORE
 config RTW88_PCI
 	tristate
 
+config RTW88_SDIO
+	tristate
+
 config RTW88_USB
 	tristate
 
diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile
index fe7293ee87b4..892cad60ba31 100644
--- a/drivers/net/wireless/realtek/rtw88/Makefile
+++ b/drivers/net/wireless/realtek/rtw88/Makefile
@@ -59,5 +59,8 @@  rtw88_8821cu-objs		:= rtw8821cu.o
 obj-$(CONFIG_RTW88_PCI)		+= rtw88_pci.o
 rtw88_pci-objs			:= pci.o
 
+obj-$(CONFIG_RTW88_SDIO)	+= rtw88_sdio.o
+rtw88_sdio-objs			:= sdio.o
+
 obj-$(CONFIG_RTW88_USB)		+= rtw88_usb.o
 rtw88_usb-objs			:= usb.o
diff --git a/drivers/net/wireless/realtek/rtw88/debug.h b/drivers/net/wireless/realtek/rtw88/debug.h
index 066792dd96af..a9149c6c2b48 100644
--- a/drivers/net/wireless/realtek/rtw88/debug.h
+++ b/drivers/net/wireless/realtek/rtw88/debug.h
@@ -24,6 +24,7 @@  enum rtw_debug_mask {
 	RTW_DBG_ADAPTIVITY	= 0x00008000,
 	RTW_DBG_HW_SCAN		= 0x00010000,
 	RTW_DBG_STATE		= 0x00020000,
+	RTW_DBG_SDIO		= 0x00040000,
 
 	RTW_DBG_ALL		= 0xffffffff
 };
diff --git a/drivers/net/wireless/realtek/rtw88/mac.h b/drivers/net/wireless/realtek/rtw88/mac.h
index 3172aa5ac4de..58c3dccc14bb 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.h
+++ b/drivers/net/wireless/realtek/rtw88/mac.h
@@ -7,7 +7,6 @@ 
 
 #define RTW_HW_PORT_NUM		5
 #define cut_version_to_mask(cut) (0x1 << ((cut) + 1))
-#define SDIO_LOCAL_OFFSET	0x10250000
 #define DDMA_POLLING_COUNT	1000
 #define C2H_PKT_BUF		256
 #define REPORT_BUF		128
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index 8852b24d6c2a..4ea2c6b491e9 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -185,6 +185,9 @@ 
 	(((x) & BIT_MASK_TXDMA_VIQ_MAP) << BIT_SHIFT_TXDMA_VIQ_MAP)
 #define REG_TXDMA_PQ_MAP	0x010C
 #define BIT_RXDMA_ARBBW_EN	BIT(0)
+#define BIT_RXSHFT_EN		BIT(1)
+#define BIT_RXDMA_AGG_EN	BIT(2)
+#define BIT_TXDMA_BW_EN		BIT(3)
 #define BIT_SHIFT_TXDMA_BEQ_MAP	8
 #define BIT_MASK_TXDMA_BEQ_MAP	0x3
 #define BIT_TXDMA_BEQ_MAP(x)                                                   \
@@ -283,10 +286,17 @@ 
 #define REG_H2C_TAIL		0x0248
 #define REG_H2C_READ_ADDR	0x024C
 #define REG_H2C_INFO		0x0254
+#define REG_RXDMA_AGG_PG_TH	0x0280
+#define BIT_SHIFT_DMA_AGG_TO_V1	8
+#define BIT_EN_PRE_CALC		BIT(29)
 #define REG_RXPKT_NUM		0x0284
 #define BIT_RXDMA_REQ		BIT(19)
 #define BIT_RW_RELEASE		BIT(18)
 #define BIT_RXDMA_IDLE		BIT(17)
+#define REG_RXDMA_STATUS	0x0288
+#define REG_RXDMA_DPR		0x028C
+#define REG_RXDMA_MODE		0x0290
+#define BIT_DMA_MODE		BIT(1)
 #define REG_RXPKTNUM		0x02B0
 
 #define REG_INT_MIG		0x0304
diff --git a/drivers/net/wireless/realtek/rtw88/sdio.c b/drivers/net/wireless/realtek/rtw88/sdio.c
new file mode 100644
index 000000000000..0e637ff2293f
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/sdio.c
@@ -0,0 +1,1242 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+ *
+ * Based on rtw88/pci.c:
+ *   Copyright(c) 2018-2019  Realtek Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_func.h>
+#include "sdio.h"
+#include "reg.h"
+#include "tx.h"
+#include "rx.h"
+#include "fw.h"
+#include "ps.h"
+#include "debug.h"
+
+#define RTW_SDIO_INDIRECT_RW_RETRIES		50
+
+static bool rtw_sdio_is_bus_addr(u32 addr)
+{
+	return (addr & RTW_SDIO_BUS_MSK) != 0;
+}
+
+static bool rtw_sdio_bus_claim_needed(struct rtw_sdio *rtwsdio)
+{
+	return !rtwsdio->irq_thread ||
+	       rtwsdio->irq_thread != current;
+}
+
+static u32 rtw_sdio_to_bus_offset(struct rtw_dev *rtwdev, u32 addr)
+{
+	switch (addr & RTW_SDIO_BUS_MSK) {
+	case WLAN_IOREG_OFFSET:
+		addr &= WLAN_IOREG_REG_MSK;
+		addr |= FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
+				   REG_SDIO_CMD_ADDR_MAC_REG);
+		break;
+	case SDIO_LOCAL_OFFSET:
+		addr &= SDIO_LOCAL_REG_MSK;
+		addr |= FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
+				   REG_SDIO_CMD_ADDR_SDIO_REG);
+		break;
+	default:
+		rtw_warn(rtwdev, "Cannot convert addr 0x%08x to bus offset",
+			 addr);
+	}
+
+	return addr;
+}
+
+static void rtw_sdio_writel(struct rtw_sdio *rtwsdio, u32 val,
+			    u32 addr, int *ret)
+{
+	u8 buf[4];
+	int i;
+
+	if (!(addr & 3) && rtwsdio->is_powered_on) {
+		sdio_writel(rtwsdio->sdio_func, val, addr, ret);
+		return;
+	}
+
+	*(__le32 *)buf = cpu_to_le32(val);
+
+	for (i = 0; i < 4; i++) {
+		sdio_writeb(rtwsdio->sdio_func, buf[i], addr + i, ret);
+		if (*ret)
+			return;
+	}
+}
+
+static u32 rtw_sdio_readl(struct rtw_sdio *rtwsdio, u32 addr, int *ret)
+{
+	u8 buf[4];
+	int i;
+
+	if (!(addr & 3) && rtwsdio->is_powered_on)
+		return sdio_readl(rtwsdio->sdio_func, addr, ret);
+
+	for (i = 0; i < 4; i++) {
+		buf[i] = sdio_readb(rtwsdio->sdio_func, addr + i, ret);
+		if (*ret)
+			return 0;
+	}
+
+	return le32_to_cpu(*(__le32 *)buf);
+}
+
+static u8 rtw_sdio_read_indirect8(struct rtw_dev *rtwdev, u32 addr, int *ret)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	u32 reg_cfg, reg_data;
+	int retry;
+	u8 tmp;
+
+	reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG);
+	reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA);
+
+	rtw_sdio_writel(rtwsdio, BIT(19) | addr, reg_cfg, ret);
+	if (*ret)
+		return 0;
+
+	for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) {
+		tmp = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, ret);
+		if (!ret && tmp & BIT(4))
+			break;
+	}
+
+	if (*ret)
+		return 0;
+
+	return sdio_readb(rtwsdio->sdio_func, reg_data, ret);
+}
+
+static int rtw_sdio_read_indirect_bytes(struct rtw_dev *rtwdev, u32 addr,
+					u8 *buf, int count)
+{
+	int i, ret;
+
+	for (i = 0; i < count; i++) {
+		buf[0] = rtw_sdio_read_indirect8(rtwdev, addr + i, &ret);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static u32 rtw_sdio_read_indirect32(struct rtw_dev *rtwdev, u32 addr, int *ret)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	u32 reg_cfg, reg_data, val;
+	int retry;
+
+	reg_cfg = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_CFG);
+	reg_data = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_INDIRECT_REG_DATA);
+
+	rtw_sdio_writel(rtwsdio, BIT(19) | BIT(17) | addr, reg_cfg, ret);
+	if (*ret)
+		return 0;
+
+	for (retry = 0; retry < RTW_SDIO_INDIRECT_RW_RETRIES; retry++) {
+		val = sdio_readb(rtwsdio->sdio_func, reg_cfg + 2, ret);
+		if (!ret && (val & BIT(4)))
+			break;
+	}
+
+	if (!*ret)
+		val = rtw_sdio_readl(rtwsdio, reg_data, ret);
+
+	return val;
+}
+
+static u8 rtw_sdio_read8(struct rtw_dev *rtwdev, u32 addr)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool direct, bus_claim;
+	int ret;
+	u8 val;
+
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+	direct = rtw_sdio_is_bus_addr(addr);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	if (direct) {
+		addr = rtw_sdio_to_bus_offset(rtwdev, addr);
+		val = sdio_readb(rtwsdio->sdio_func, addr, &ret);
+	} else {
+		val = rtw_sdio_read_indirect8(rtwdev, addr, &ret);
+	}
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev, "sdio read8 failed (0x%x): %d", addr, ret);
+
+	return val;
+}
+
+static u16 rtw_sdio_read16(struct rtw_dev *rtwdev, u32 addr)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool direct, bus_claim;
+	u8 buf[2];
+	int ret;
+	u16 val;
+
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+	direct = rtw_sdio_is_bus_addr(addr);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	if (direct) {
+		addr = rtw_sdio_to_bus_offset(rtwdev, addr);
+		buf[0] = sdio_readb(rtwsdio->sdio_func, addr, &ret);
+		if (!ret)
+			buf[1] = sdio_readb(rtwsdio->sdio_func, addr + 1, &ret);
+		val = le16_to_cpu(*(__le16 *)buf);
+	} else if (addr & 1) {
+		ret = rtw_sdio_read_indirect_bytes(rtwdev, addr, buf, 2);
+		val = le16_to_cpu(*(__le16 *)buf);
+	} else {
+		val = rtw_sdio_read_indirect32(rtwdev, addr, &ret);
+	}
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev, "sdio read16 failed (0x%x): %d", addr, ret);
+
+	return val;
+}
+
+static u32 rtw_sdio_read32(struct rtw_dev *rtwdev, u32 addr)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool direct, bus_claim;
+	u8 buf[4];
+	u32 val;
+	int ret;
+
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+	direct = rtw_sdio_is_bus_addr(addr);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	if (direct) {
+		addr = rtw_sdio_to_bus_offset(rtwdev, addr);
+		val = rtw_sdio_readl(rtwsdio, addr, &ret);
+	} else if (addr & 3) {
+		ret = rtw_sdio_read_indirect_bytes(rtwdev, addr, buf, 4);
+		val = le32_to_cpu(*(__le32 *)buf);
+	} else {
+		val = rtw_sdio_read_indirect32(rtwdev, addr, &ret);
+	}
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev, "sdio read32 failed (0x%x): %d", addr, ret);
+
+	return val;
+}
+
+static u32 rtw_sdio_to_write_address(struct rtw_dev *rtwdev, u32 addr)
+{
+	if (!rtw_sdio_is_bus_addr(addr))
+		addr |= WLAN_IOREG_OFFSET;
+
+	return rtw_sdio_to_bus_offset(rtwdev, addr);
+}
+
+static void rtw_sdio_write8(struct rtw_dev *rtwdev, u32 addr, u8 val)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool bus_claim;
+	int ret;
+
+	addr = rtw_sdio_to_write_address(rtwdev, addr);
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	sdio_writeb(rtwsdio->sdio_func, val, addr, &ret);
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev, "sdio write8 failed (0x%x): %d", addr, ret);
+}
+
+static void rtw_sdio_write16(struct rtw_dev *rtwdev, u32 addr, u16 val)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool bus_claim;
+	int ret;
+
+	addr = rtw_sdio_to_write_address(rtwdev, addr);
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	sdio_writeb(rtwsdio->sdio_func, val, addr, &ret);
+	if (!ret)
+		sdio_writeb(rtwsdio->sdio_func, val >> 8, addr + 1, &ret);
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev, "sdio write16 failed (0x%x): %d", addr, ret);
+}
+
+static void rtw_sdio_write32(struct rtw_dev *rtwdev, u32 addr, u32 val)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool bus_claim;
+	int ret;
+
+	addr = rtw_sdio_to_write_address(rtwdev, addr);
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	rtw_sdio_writel(rtwsdio, val, addr, &ret);
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev, "sdio write32 failed (0x%x): %d", addr, ret);
+}
+
+static u32 rtw_sdio_get_tx_addr(struct rtw_dev *rtwdev, size_t size,
+				enum rtw_tx_queue_type queue)
+{
+	u32 txaddr;
+
+	switch (queue) {
+	case RTW_TX_QUEUE_BCN:
+	case RTW_TX_QUEUE_H2C:
+	case RTW_TX_QUEUE_HI0:
+		txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
+				    REG_SDIO_CMD_ADDR_TXFF_HIGH);
+		break;
+	case RTW_TX_QUEUE_VI:
+	case RTW_TX_QUEUE_VO:
+		txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
+				    REG_SDIO_CMD_ADDR_TXFF_NORMAL);
+		break;
+	case RTW_TX_QUEUE_BE:
+	case RTW_TX_QUEUE_BK:
+		txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
+				    REG_SDIO_CMD_ADDR_TXFF_LOW);
+		break;
+	case RTW_TX_QUEUE_MGMT:
+		txaddr = FIELD_PREP(REG_SDIO_CMD_ADDR_MSK,
+				    REG_SDIO_CMD_ADDR_TXFF_EXTRA);
+		break;
+	default:
+		rtw_warn(rtwdev, "Unsupported queue for TX addr: 0x%02x\n",
+			 queue);
+		return 0;
+	}
+
+	txaddr += DIV_ROUND_UP(size, 4);
+
+	return txaddr;
+};
+
+static int rtw_sdio_read_port(struct rtw_dev *rtwdev, u8 *buf, size_t count)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	u32 rxaddr = rtwsdio->rx_addr++;
+	int ret;
+
+	ret = sdio_memcpy_fromio(rtwsdio->sdio_func, buf,
+				 RTW_SDIO_ADDR_RX_RX0FF_GEN(rxaddr), count);
+	if (ret)
+		rtw_warn(rtwdev,
+			 "Failed to read %lu byte(s) from SDIO port 0x%08x",
+			 count, rxaddr);
+
+	return ret;
+}
+
+static int rtw_sdio_check_free_txpg(struct rtw_dev *rtwdev, u8 queue,
+				    size_t count)
+{
+	unsigned int pages_free, pages_needed;
+
+	if (rtw_chip_wcpu_11n(rtwdev)) {
+		u32 free_txpg;
+
+		free_txpg = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG);
+
+		switch (queue) {
+		case RTW_TX_QUEUE_BCN:
+		case RTW_TX_QUEUE_H2C:
+		case RTW_TX_QUEUE_HI0:
+		case RTW_TX_QUEUE_MGMT:
+			/* high */
+			pages_free = free_txpg & 0xff;
+			break;
+		case RTW_TX_QUEUE_VI:
+		case RTW_TX_QUEUE_VO:
+			/* normal */
+			pages_free = (free_txpg >> 8) & 0xff;
+			break;
+		case RTW_TX_QUEUE_BE:
+		case RTW_TX_QUEUE_BK:
+			/* low */
+			pages_free = (free_txpg >> 16) & 0xff;
+			break;
+		default:
+			rtw_warn(rtwdev, "Unknown mapping for queue %u\n", queue);
+			break;
+		}
+
+		/* add the pages from the public queue */
+		pages_free += (free_txpg >> 24) & 0xff;
+	} else {
+		u32 free_txpg[3];
+
+		free_txpg[0] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG);
+		free_txpg[1] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 4);
+		free_txpg[2] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 8);
+
+		switch (queue) {
+		case RTW_TX_QUEUE_BCN:
+		case RTW_TX_QUEUE_H2C:
+		case RTW_TX_QUEUE_HI0:
+			/* high */
+			pages_free = free_txpg[0] & 0xfff;
+			break;
+		case RTW_TX_QUEUE_VI:
+		case RTW_TX_QUEUE_VO:
+			/* normal */
+			pages_free = (free_txpg[0] >> 16) & 0xfff;
+			break;
+		case RTW_TX_QUEUE_BE:
+		case RTW_TX_QUEUE_BK:
+			/* low */
+			pages_free = free_txpg[1] & 0xfff;
+			break;
+		case RTW_TX_QUEUE_MGMT:
+			/* extra */
+			pages_free = free_txpg[2] & 0xfff;
+			break;
+		default:
+			rtw_warn(rtwdev, "Unknown mapping for queue %u\n", queue);
+			return -EINVAL;
+		}
+
+		/* add the pages from the public queue */
+		pages_free += (free_txpg[1] >> 16) & 0xfff;
+	}
+
+	pages_needed = DIV_ROUND_UP(count, rtwdev->chip->page_size);
+
+	if (pages_needed > pages_free) {
+		rtw_dbg(rtwdev, RTW_DBG_SDIO,
+			"Not enough free pages (%u needed, %u free) in queue %u for %zu bytes\n",
+			pages_needed, pages_free, queue, count);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int rtw_sdio_write_port(struct rtw_dev *rtwdev, struct sk_buff *skb,
+			       enum rtw_tx_queue_type queue)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool bus_claim;
+	size_t txsize;
+	u32 txaddr;
+	int ret;
+
+	txaddr = rtw_sdio_get_tx_addr(rtwdev, skb->len, queue);
+	if (!txaddr)
+		return -EINVAL;
+
+	txsize = sdio_align_size(rtwsdio->sdio_func, skb->len);
+
+	ret = rtw_sdio_check_free_txpg(rtwdev, queue, txsize);
+	if (ret)
+		return ret;
+
+	if (!IS_ALIGNED((unsigned long)skb->data, RTW_SDIO_DATA_PTR_ALIGN))
+		rtw_warn(rtwdev, "Got unaligned SKB in %s() for queue %u\n",
+			 __func__, queue);
+
+	bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	ret = sdio_memcpy_toio(rtwsdio->sdio_func, txaddr, skb->data, txsize);
+
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	if (ret)
+		rtw_warn(rtwdev,
+			 "Failed to write %lu byte(s) to SDIO port 0x%08x",
+			 txsize, txaddr);
+
+	return ret;
+}
+
+static void rtw_sdio_init(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+
+	rtwsdio->irq_mask = REG_SDIO_HIMR_RX_REQUEST | REG_SDIO_HIMR_CPWM1;
+}
+
+static void rtw_sdio_rx_aggregation(struct rtw_dev *rtwdev, bool enable)
+{
+	u8 size, timeout;
+
+	if (enable) {
+		if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C) {
+			size = 0xff;
+			timeout = 0x20;
+		} else {
+			size = 0x6;
+			timeout = 0x6;
+		}
+
+		/* Make the firmware honor the size limit configured below */
+		rtw_write32_set(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
+
+		rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
+
+		rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, size |
+			    (timeout << BIT_SHIFT_DMA_AGG_TO_V1));
+
+		rtw_write8_set(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE);
+	} else {
+		rtw_write32_clr(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
+		rtw_write8_clr(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
+		rtw_write8_clr(rtwdev, REG_RXDMA_MODE, BIT_DMA_MODE);
+	}
+}
+
+static void rtw_sdio_enable_interrupt(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+
+	rtw_write32(rtwdev, REG_SDIO_HIMR, rtwsdio->irq_mask);
+}
+
+static void rtw_sdio_disable_interrupt(struct rtw_dev *rtwdev)
+{
+	rtw_write32(rtwdev, REG_SDIO_HIMR, 0x0);
+}
+
+static u8 rtw_sdio_get_tx_qsel(struct rtw_dev *rtwdev, struct sk_buff *skb,
+			       u8 queue)
+{
+	switch (queue) {
+	case RTW_TX_QUEUE_BCN:
+		return TX_DESC_QSEL_BEACON;
+	case RTW_TX_QUEUE_H2C:
+		return TX_DESC_QSEL_H2C;
+	case RTW_TX_QUEUE_MGMT:
+		if (rtw_chip_wcpu_11n(rtwdev))
+			return TX_DESC_QSEL_HIGH;
+		else
+			return TX_DESC_QSEL_MGMT;
+	case RTW_TX_QUEUE_HI0:
+		return TX_DESC_QSEL_HIGH;
+	default:
+		return skb->priority;
+	}
+};
+
+static int rtw_sdio_setup(struct rtw_dev *rtwdev)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static int rtw_sdio_start(struct rtw_dev *rtwdev)
+{
+	rtw_sdio_rx_aggregation(rtwdev, false);
+	rtw_sdio_enable_interrupt(rtwdev);
+
+	return 0;
+}
+
+static void rtw_sdio_stop(struct rtw_dev *rtwdev)
+{
+	rtw_sdio_disable_interrupt(rtwdev);
+}
+
+static void rtw_sdio_deep_ps_enter(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool tx_empty = true;
+	u8 queue;
+
+	if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_TX_WAKE)) {
+		/* Deep PS state is not allowed to TX-DMA */
+		for (queue = 0; queue < RTK_MAX_TX_QUEUE_NUM; queue++) {
+			/* BCN queue is rsvd page, does not have DMA interrupt
+			 * H2C queue is managed by firmware
+			 */
+			if (queue == RTW_TX_QUEUE_BCN ||
+			    queue == RTW_TX_QUEUE_H2C)
+				continue;
+
+			/* check if there is any skb DMAing */
+			if (skb_queue_len(&rtwsdio->tx_queue[queue])) {
+				tx_empty = false;
+				break;
+			}
+		}
+	}
+
+	if (!tx_empty) {
+		rtw_dbg(rtwdev, RTW_DBG_PS,
+			"TX path not empty, cannot enter deep power save state\n");
+		return;
+	}
+
+	set_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags);
+	rtw_power_mode_change(rtwdev, true);
+}
+
+static void rtw_sdio_deep_ps_leave(struct rtw_dev *rtwdev)
+{
+	if (test_and_clear_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags))
+		rtw_power_mode_change(rtwdev, false);
+}
+
+static void rtw_sdio_deep_ps(struct rtw_dev *rtwdev, bool enter)
+{
+	if (enter && !test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags))
+		rtw_sdio_deep_ps_enter(rtwdev);
+
+	if (!enter && test_bit(RTW_FLAG_LEISURE_PS_DEEP, rtwdev->flags))
+		rtw_sdio_deep_ps_leave(rtwdev);
+}
+
+static void rtw_sdio_tx_kick_off(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+
+	queue_work(rtwsdio->txwq, &rtwsdio->tx_handler_data->work);
+}
+
+static void rtw_sdio_link_ps(struct rtw_dev *rtwdev, bool enter)
+{
+	/* nothing to do */
+}
+
+static void rtw_sdio_interface_cfg(struct rtw_dev *rtwdev)
+{
+	u32 val;
+
+	rtw_read32(rtwdev, REG_SDIO_FREE_TXPG);
+
+	val = rtw_read32(rtwdev, REG_SDIO_TX_CTRL);
+	val &= 0xfff8;
+	rtw_write32(rtwdev, REG_SDIO_TX_CTRL, val);
+}
+
+static void rtw_sdio_power_switch(struct rtw_dev *rtwdev, bool on)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+
+	rtwsdio->is_powered_on = on;
+}
+
+static struct rtw_sdio_tx_data *rtw_sdio_get_tx_data(struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	BUILD_BUG_ON(sizeof(struct rtw_sdio_tx_data) >
+		     sizeof(info->status.status_driver_data));
+
+	return (struct rtw_sdio_tx_data *)info->status.status_driver_data;
+}
+
+static void rtw_sdio_tx_skb_prepare(struct rtw_dev *rtwdev,
+				    struct rtw_tx_pkt_info *pkt_info,
+				    struct sk_buff *skb,
+				    enum rtw_tx_queue_type queue)
+{
+	const struct rtw_chip_info *chip = rtwdev->chip;
+	unsigned long data_addr, aligned_addr;
+	size_t offset;
+	u8 *pkt_desc;
+
+	pkt_desc = skb_push(skb, chip->tx_pkt_desc_sz);
+
+	data_addr = (unsigned long)pkt_desc;
+	aligned_addr = ALIGN(data_addr, RTW_SDIO_DATA_PTR_ALIGN);
+
+	if (data_addr != aligned_addr) {
+		/* Ensure that the start of the pkt_desc is always aligned at
+		 * RTW_SDIO_DATA_PTR_ALIGN.
+		 */
+		offset = RTW_SDIO_DATA_PTR_ALIGN - (aligned_addr - data_addr);
+
+		pkt_desc = skb_push(skb, offset);
+
+		/* By inserting padding to align the start of the pkt_desc we
+		 * need to inform the firmware that the actual data starts at
+		 * a different offset than normal.
+		 */
+		pkt_info->offset += offset;
+	}
+
+	memset(pkt_desc, 0, chip->tx_pkt_desc_sz);
+
+	pkt_info->qsel = rtw_sdio_get_tx_qsel(rtwdev, skb, queue);
+
+	rtw_tx_fill_tx_desc(pkt_info, skb);
+	chip->ops->fill_txdesc_checksum(rtwdev, pkt_info, pkt_desc);
+}
+
+static int rtw_sdio_write_data(struct rtw_dev *rtwdev,
+			       struct rtw_tx_pkt_info *pkt_info,
+			       struct sk_buff *skb,
+			       enum rtw_tx_queue_type queue)
+{
+	int ret;
+
+	rtw_sdio_tx_skb_prepare(rtwdev, pkt_info, skb, queue);
+
+	ret = rtw_sdio_write_port(rtwdev, skb, queue);
+	dev_kfree_skb_any(skb);
+
+	return ret;
+}
+
+static int rtw_sdio_write_data_rsvd_page(struct rtw_dev *rtwdev, u8 *buf,
+					 u32 size)
+{
+	struct rtw_tx_pkt_info pkt_info = {};
+	struct sk_buff *skb;
+
+	skb = rtw_tx_write_data_rsvd_page_get(rtwdev, &pkt_info, buf, size);
+	if (!skb)
+		return -ENOMEM;
+
+	return rtw_sdio_write_data(rtwdev, &pkt_info, skb, RTW_TX_QUEUE_BCN);
+}
+
+static int rtw_sdio_write_data_h2c(struct rtw_dev *rtwdev, u8 *buf, u32 size)
+{
+	struct rtw_tx_pkt_info pkt_info = {};
+	struct sk_buff *skb;
+
+	skb = rtw_tx_write_data_h2c_get(rtwdev, &pkt_info, buf, size);
+	if (!skb)
+		return -ENOMEM;
+
+	return rtw_sdio_write_data(rtwdev, &pkt_info, skb, RTW_TX_QUEUE_H2C);
+}
+
+static int rtw_sdio_tx_write(struct rtw_dev *rtwdev,
+			     struct rtw_tx_pkt_info *pkt_info,
+			     struct sk_buff *skb)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	enum rtw_tx_queue_type queue = rtw_tx_queue_mapping(skb);
+	struct rtw_sdio_tx_data *tx_data;
+
+	rtw_sdio_tx_skb_prepare(rtwdev, pkt_info, skb, queue);
+
+	tx_data = rtw_sdio_get_tx_data(skb);
+	tx_data->sn = pkt_info->sn;
+
+	skb_queue_tail(&rtwsdio->tx_queue[queue], skb);
+
+	return 0;
+}
+
+static void rtw_sdio_tx_err_isr(struct rtw_dev *rtwdev)
+{
+	u32 val = rtw_read32(rtwdev, REG_TXDMA_STATUS);
+
+	rtw_write32(rtwdev, REG_TXDMA_STATUS, val);
+}
+
+static void rtw_sdio_rx_skb(struct rtw_dev *rtwdev, struct sk_buff *skb,
+			    u32 pkt_offset, struct rtw_rx_pkt_stat *pkt_stat,
+			    struct ieee80211_rx_status *rx_status)
+{
+	memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
+
+	if (pkt_stat->is_c2h) {
+		skb_put(skb, pkt_stat->pkt_len + pkt_offset);
+		rtw_fw_c2h_cmd_rx_irqsafe(rtwdev, pkt_offset, skb);
+		return;
+	}
+
+	skb_put(skb, pkt_stat->pkt_len);
+	skb_reserve(skb, pkt_offset);
+
+	rtw_rx_stats(rtwdev, pkt_stat->vif, skb);
+
+	ieee80211_rx_irqsafe(rtwdev->hw, skb);
+}
+
+static void rtw_sdio_rxfifo_recv(struct rtw_dev *rtwdev, u32 rx_len)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	const struct rtw_chip_info *chip = rtwdev->chip;
+	u32 pkt_desc_sz = chip->rx_pkt_desc_sz;
+	struct ieee80211_rx_status rx_status;
+	struct rtw_rx_pkt_stat pkt_stat;
+	struct sk_buff *skb, *split_skb;
+	u32 pkt_offset, curr_pkt_len;
+	size_t bufsz;
+	u8 *rx_desc;
+	int ret;
+
+	bufsz = sdio_align_size(rtwsdio->sdio_func, rx_len);
+
+	skb = dev_alloc_skb(bufsz);
+	if (!skb)
+		return;
+
+	ret = rtw_sdio_read_port(rtwdev, skb->data, bufsz);
+	if (ret) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	while (true) {
+		rx_desc = skb->data;
+		chip->ops->query_rx_desc(rtwdev, rx_desc, &pkt_stat,
+					 &rx_status);
+		pkt_offset = pkt_desc_sz + pkt_stat.drv_info_sz +
+			     pkt_stat.shift;
+
+		curr_pkt_len = ALIGN(pkt_offset + pkt_stat.pkt_len,
+				     RTW_SDIO_DATA_PTR_ALIGN);
+
+		if ((curr_pkt_len + pkt_desc_sz) >= rx_len) {
+			/* Use the original skb (with it's adjusted offset)
+			 * when processing the last (or even the only) entry to
+			 * have it's memory freed automatically.
+			 */
+			rtw_sdio_rx_skb(rtwdev, skb, pkt_offset, &pkt_stat,
+					&rx_status);
+			break;
+		}
+
+		split_skb = dev_alloc_skb(curr_pkt_len);
+		if (!split_skb) {
+			rtw_sdio_rx_skb(rtwdev, skb, pkt_offset, &pkt_stat,
+					&rx_status);
+			break;
+		}
+
+		skb_copy_header(split_skb, skb);
+		memcpy(split_skb->data, skb->data, curr_pkt_len);
+
+		rtw_sdio_rx_skb(rtwdev, split_skb, pkt_offset, &pkt_stat,
+				&rx_status);
+
+		/* Move to the start of the next RX descriptor */
+		skb_reserve(skb, curr_pkt_len);
+		rx_len -= curr_pkt_len;
+	}
+}
+
+static void rtw_sdio_rx_isr(struct rtw_dev *rtwdev)
+{
+	u32 rx_len;
+
+	while (true) {
+		if (rtw_chip_wcpu_11n(rtwdev))
+			rx_len = rtw_read16(rtwdev, REG_SDIO_RX0_REQ_LEN);
+		else
+			rx_len = rtw_read32(rtwdev, REG_SDIO_RX0_REQ_LEN);
+
+		if (!rx_len)
+			break;
+
+		rtw_sdio_rxfifo_recv(rtwdev, rx_len);
+	}
+}
+
+static void rtw_sdio_handle_interrupt(struct sdio_func *sdio_func)
+{
+	struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func);
+	struct rtw_dev *rtwdev = hw->priv;
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	u32 hisr;
+
+	rtwsdio->irq_thread = current;
+
+	hisr = rtw_read32(rtwdev, REG_SDIO_HISR);
+
+	if (hisr & REG_SDIO_HISR_TXERR)
+		rtw_sdio_tx_err_isr(rtwdev);
+	if (hisr & REG_SDIO_HISR_RX_REQUEST) {
+		hisr &= ~REG_SDIO_HISR_RX_REQUEST;
+		rtw_sdio_rx_isr(rtwdev);
+	}
+
+	rtw_write32(rtwdev, REG_SDIO_HISR, hisr);
+
+	rtwsdio->irq_thread = NULL;
+}
+
+static int __maybe_unused rtw_sdio_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int __maybe_unused rtw_sdio_resume(struct device *dev)
+{
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(rtw_sdio_pm_ops, rtw_sdio_suspend, rtw_sdio_resume);
+EXPORT_SYMBOL(rtw_sdio_pm_ops);
+
+static int rtw_sdio_claim(struct rtw_dev *rtwdev, struct sdio_func *sdio_func)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	int ret;
+
+	sdio_claim_host(sdio_func);
+
+	ret = sdio_enable_func(sdio_func);
+	if (ret) {
+		rtw_err(rtwdev, "Failed to enable SDIO func");
+		goto err_release_host;
+	}
+
+	ret = sdio_set_block_size(sdio_func, RTW_SDIO_BLOCK_SIZE);
+	if (ret) {
+		rtw_err(rtwdev, "Failed to set SDIO block size to 512");
+		goto err_disable_func;
+	}
+
+	rtwsdio->sdio_func = sdio_func;
+
+	rtwsdio->sdio3_bus_mode = mmc_card_uhs(sdio_func->card);
+
+	sdio_set_drvdata(sdio_func, rtwdev->hw);
+	SET_IEEE80211_DEV(rtwdev->hw, &sdio_func->dev);
+
+	sdio_release_host(sdio_func);
+
+	return 0;
+
+err_disable_func:
+	sdio_disable_func(sdio_func);
+err_release_host:
+	sdio_release_host(sdio_func);
+	return ret;
+}
+
+static void rtw_sdio_declaim(struct rtw_dev *rtwdev,
+			     struct sdio_func *sdio_func)
+{
+	sdio_claim_host(sdio_func);
+	sdio_disable_func(sdio_func);
+	sdio_release_host(sdio_func);
+}
+
+static struct rtw_hci_ops rtw_sdio_ops = {
+	.tx_write = rtw_sdio_tx_write,
+	.tx_kick_off = rtw_sdio_tx_kick_off,
+	.setup = rtw_sdio_setup,
+	.start = rtw_sdio_start,
+	.stop = rtw_sdio_stop,
+	.deep_ps = rtw_sdio_deep_ps,
+	.link_ps = rtw_sdio_link_ps,
+	.interface_cfg = rtw_sdio_interface_cfg,
+
+	.power_switch = rtw_sdio_power_switch,
+
+	.read8 = rtw_sdio_read8,
+	.read16 = rtw_sdio_read16,
+	.read32 = rtw_sdio_read32,
+	.write8 = rtw_sdio_write8,
+	.write16 = rtw_sdio_write16,
+	.write32 = rtw_sdio_write32,
+	.write_data_rsvd_page = rtw_sdio_write_data_rsvd_page,
+	.write_data_h2c = rtw_sdio_write_data_h2c,
+};
+
+static int rtw_sdio_request_irq(struct rtw_dev *rtwdev,
+				struct sdio_func *sdio_func)
+{
+	int ret;
+
+	sdio_claim_host(sdio_func);
+	ret = sdio_claim_irq(sdio_func, &rtw_sdio_handle_interrupt);
+	sdio_release_host(sdio_func);
+
+	if (ret) {
+		rtw_err(rtwdev, "failed to claim SDIO IRQ");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rtw_sdio_indicate_tx_status(struct rtw_dev *rtwdev,
+					struct sk_buff *skb)
+{
+	struct rtw_sdio_tx_data *tx_data = rtw_sdio_get_tx_data(skb);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hw *hw = rtwdev->hw;
+
+	/* enqueue to wait for tx report */
+	if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) {
+		rtw_tx_report_enqueue(rtwdev, skb, tx_data->sn);
+		return;
+	}
+
+	/* always ACK for others, then they won't be marked as drop */
+	ieee80211_tx_info_clear_status(info);
+	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+		info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED;
+	else
+		info->flags |= IEEE80211_TX_STAT_ACK;
+
+	ieee80211_tx_status_irqsafe(hw, skb);
+}
+
+static void rtw_sdio_process_tx_queue(struct rtw_dev *rtwdev,
+				      enum rtw_tx_queue_type queue)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	struct sk_buff *skb;
+	int ret;
+
+	while (true) {
+		skb = skb_dequeue(&rtwsdio->tx_queue[queue]);
+		if (!skb)
+			break;
+
+		ret = rtw_sdio_write_port(rtwdev, skb, queue);
+		if (ret) {
+			skb_queue_head(&rtwsdio->tx_queue[queue], skb);
+			break;
+		}
+
+		if (queue <= RTW_TX_QUEUE_VO)
+			rtw_sdio_indicate_tx_status(rtwdev, skb);
+		else
+			dev_kfree_skb_any(skb);
+	}
+}
+
+static void rtw_sdio_tx_handler(struct work_struct *work)
+{
+	struct rtw_sdio_work_data *work_data =
+		container_of(work, struct rtw_sdio_work_data, work);
+	struct rtw_dev *rtwdev = work_data->rtwdev;
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool has_more_tx_data;
+	int queue;
+
+	if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_TX_WAKE))
+		rtw_sdio_deep_ps_leave(rtwdev);
+
+	do {
+		has_more_tx_data = false;
+
+		for (queue = RTK_MAX_TX_QUEUE_NUM - 1; queue >= 0; queue--) {
+			rtw_sdio_process_tx_queue(rtwdev, queue);
+
+			if (!skb_queue_empty(&rtwsdio->tx_queue[queue]))
+				has_more_tx_data = true;
+		}
+	} while (has_more_tx_data);
+}
+
+static void rtw_sdio_free_irq(struct rtw_dev *rtwdev,
+			      struct sdio_func *sdio_func)
+{
+	sdio_release_irq(sdio_func);
+}
+
+static int rtw_sdio_init_tx(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	int i;
+
+	rtwsdio->txwq = create_singlethread_workqueue("rtw88_sdio: tx wq");
+	if (!rtwsdio->txwq) {
+		rtw_err(rtwdev, "failed to create TX work queue\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < RTK_MAX_TX_QUEUE_NUM; i++)
+		skb_queue_head_init(&rtwsdio->tx_queue[i]);
+	rtwsdio->tx_handler_data = kmalloc(sizeof(*rtwsdio->tx_handler_data),
+					   GFP_KERNEL);
+	if (!rtwsdio->tx_handler_data)
+		goto err_destroy_wq;
+
+	rtwsdio->tx_handler_data->rtwdev = rtwdev;
+	INIT_WORK(&rtwsdio->tx_handler_data->work, rtw_sdio_tx_handler);
+
+	return 0;
+
+err_destroy_wq:
+	destroy_workqueue(rtwsdio->txwq);
+	return -ENOMEM;
+}
+
+static void rtw_sdio_deinit_tx(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	int i;
+
+	for (i = 0; i < RTK_MAX_TX_QUEUE_NUM; i++)
+		skb_queue_purge(&rtwsdio->tx_queue[i]);
+
+	flush_workqueue(rtwsdio->txwq);
+	destroy_workqueue(rtwsdio->txwq);
+	kfree(rtwsdio->tx_handler_data);
+}
+
+int rtw_sdio_probe(struct sdio_func *sdio_func,
+		   const struct sdio_device_id *id)
+{
+	struct ieee80211_hw *hw;
+	struct rtw_dev *rtwdev;
+	int drv_data_size;
+	int ret;
+
+	drv_data_size = sizeof(struct rtw_dev) + sizeof(struct rtw_sdio);
+	hw = ieee80211_alloc_hw(drv_data_size, &rtw_ops);
+	if (!hw) {
+		dev_err(&sdio_func->dev, "failed to allocate hw");
+		return -ENOMEM;
+	}
+
+	rtwdev = hw->priv;
+	rtwdev->hw = hw;
+	rtwdev->dev = &sdio_func->dev;
+	rtwdev->chip = (struct rtw_chip_info *)id->driver_data;
+	rtwdev->hci.ops = &rtw_sdio_ops;
+	rtwdev->hci.type = RTW_HCI_TYPE_SDIO;
+
+	ret = rtw_core_init(rtwdev);
+	if (ret)
+		goto err_release_hw;
+
+	rtw_dbg(rtwdev, RTW_DBG_SDIO,
+		"rtw88 SDIO probe: vendor=0x%04x device=%04x class=%02x",
+		id->vendor, id->device, id->class);
+
+	ret = rtw_sdio_claim(rtwdev, sdio_func);
+	if (ret) {
+		rtw_err(rtwdev, "failed to claim SDIO device");
+		goto err_deinit_core;
+	}
+
+	rtw_sdio_init(rtwdev);
+
+	ret = rtw_sdio_init_tx(rtwdev);
+	if (ret) {
+		rtw_err(rtwdev, "failed to init SDIO TX queue\n");
+		goto err_sdio_declaim;
+	}
+
+	ret = rtw_chip_info_setup(rtwdev);
+	if (ret) {
+		rtw_err(rtwdev, "failed to setup chip information");
+		goto err_destroy_txwq;
+	}
+
+	ret = rtw_register_hw(rtwdev, hw);
+	if (ret) {
+		rtw_err(rtwdev, "failed to register hw");
+		goto err_destroy_txwq;
+	}
+
+	ret = rtw_sdio_request_irq(rtwdev, sdio_func);
+	if (ret)
+		goto err_unregister_hw;
+
+	return 0;
+
+err_unregister_hw:
+	rtw_unregister_hw(rtwdev, hw);
+err_destroy_txwq:
+	rtw_sdio_deinit_tx(rtwdev);
+err_sdio_declaim:
+	rtw_sdio_declaim(rtwdev, sdio_func);
+err_deinit_core:
+	rtw_core_deinit(rtwdev);
+err_release_hw:
+	ieee80211_free_hw(hw);
+
+	return ret;
+}
+EXPORT_SYMBOL(rtw_sdio_probe);
+
+void rtw_sdio_remove(struct sdio_func *sdio_func)
+{
+	struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func);
+	struct rtw_dev *rtwdev;
+
+	if (!hw)
+		return;
+
+	rtwdev = hw->priv;
+
+	rtw_unregister_hw(rtwdev, hw);
+	rtw_sdio_disable_interrupt(rtwdev);
+	rtw_sdio_declaim(rtwdev, sdio_func);
+	rtw_sdio_free_irq(rtwdev, sdio_func);
+	rtw_sdio_deinit_tx(rtwdev);
+	rtw_core_deinit(rtwdev);
+	ieee80211_free_hw(hw);
+}
+EXPORT_SYMBOL(rtw_sdio_remove);
+
+void rtw_sdio_shutdown(struct device *dev)
+{
+	struct sdio_func *sdio_func = dev_to_sdio_func(dev);
+	struct ieee80211_hw *hw = sdio_get_drvdata(sdio_func);
+	const struct rtw_chip_info *chip;
+	struct rtw_dev *rtwdev;
+
+	if (!hw)
+		return;
+
+	rtwdev = hw->priv;
+	chip = rtwdev->chip;
+
+	if (chip->ops->shutdown)
+		chip->ops->shutdown(rtwdev);
+}
+EXPORT_SYMBOL(rtw_sdio_shutdown);
+
+MODULE_AUTHOR("Martin Blumenstingl");
+MODULE_AUTHOR("Jernej Skrabec");
+MODULE_DESCRIPTION("Realtek 802.11ac wireless SDIO driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/realtek/rtw88/sdio.h b/drivers/net/wireless/realtek/rtw88/sdio.h
new file mode 100644
index 000000000000..7339e35f808a
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/sdio.h
@@ -0,0 +1,175 @@ 
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+ */
+
+#ifndef __REG_SDIO_H_
+#define __REG_SDIO_H_
+
+#include "main.h"
+
+/* I/O bus domain address mapping */
+#define SDIO_LOCAL_OFFSET			0x10250000
+#define WLAN_IOREG_OFFSET			0x10260000
+#define FIRMWARE_FIFO_OFFSET			0x10270000
+#define TX_HIQ_OFFSET				0x10310000
+#define TX_MIQ_OFFSET				0x10320000
+#define TX_LOQ_OFFSET				0x10330000
+#define TX_EPQ_OFFSET				0x10350000
+#define RX_RX0FF_OFFSET				0x10340000
+
+#define RTW_SDIO_BUS_MSK			0xffff0000
+#define SDIO_LOCAL_REG_MSK			0x00000fff
+#define WLAN_IOREG_REG_MSK			0x0000ffff
+
+/* SDIO Tx Control */
+#define REG_SDIO_TX_CTRL			(SDIO_LOCAL_OFFSET + 0x0000)
+
+/*SDIO status timeout*/
+#define REG_SDIO_TIMEOUT			(SDIO_LOCAL_OFFSET + 0x0002)
+
+/* SDIO Host Interrupt Mask */
+#define REG_SDIO_HIMR				(SDIO_LOCAL_OFFSET + 0x0014)
+#define REG_SDIO_HIMR_RX_REQUEST		BIT(0)
+#define REG_SDIO_HIMR_AVAL			BIT(1)
+#define REG_SDIO_HIMR_TXERR			BIT(2)
+#define REG_SDIO_HIMR_RXERR			BIT(3)
+#define REG_SDIO_HIMR_TXFOVW			BIT(4)
+#define REG_SDIO_HIMR_RXFOVW			BIT(5)
+#define REG_SDIO_HIMR_TXBCNOK			BIT(6)
+#define REG_SDIO_HIMR_TXBCNERR			BIT(7)
+#define REG_SDIO_HIMR_BCNERLY_INT		BIT(16)
+#define REG_SDIO_HIMR_C2HCMD			BIT(17)
+#define REG_SDIO_HIMR_CPWM1			BIT(18)
+#define REG_SDIO_HIMR_CPWM2			BIT(19)
+#define REG_SDIO_HIMR_HSISR_IND			BIT(20)
+#define REG_SDIO_HIMR_GTINT3_IND		BIT(21)
+#define REG_SDIO_HIMR_GTINT4_IND		BIT(22)
+#define REG_SDIO_HIMR_PSTIMEOUT			BIT(23)
+#define REG_SDIO_HIMR_OCPINT			BIT(24)
+#define REG_SDIO_HIMR_ATIMEND			BIT(25)
+#define REG_SDIO_HIMR_ATIMEND_E			BIT(26)
+#define REG_SDIO_HIMR_CTWEND			BIT(27)
+/* the following two are RTL8188 SDIO Specific */
+#define REG_SDIO_HIMR_MCU_ERR			BIT(28)
+#define REG_SDIO_HIMR_TSF_BIT32_TOGGLE		BIT(29)
+
+/* SDIO Host Interrupt Service Routine */
+#define REG_SDIO_HISR				(SDIO_LOCAL_OFFSET + 0x0018)
+#define REG_SDIO_HISR_RX_REQUEST		BIT(0)
+#define REG_SDIO_HISR_AVAL			BIT(1)
+#define REG_SDIO_HISR_TXERR			BIT(2)
+#define REG_SDIO_HISR_RXERR			BIT(3)
+#define REG_SDIO_HISR_TXFOVW			BIT(4)
+#define REG_SDIO_HISR_RXFOVW			BIT(5)
+#define REG_SDIO_HISR_TXBCNOK			BIT(6)
+#define REG_SDIO_HISR_TXBCNERR			BIT(7)
+#define REG_SDIO_HISR_BCNERLY_INT		BIT(16)
+#define REG_SDIO_HISR_C2HCMD			BIT(17)
+#define REG_SDIO_HISR_CPWM1			BIT(18)
+#define REG_SDIO_HISR_CPWM2			BIT(19)
+#define REG_SDIO_HISR_HSISR_IND			BIT(20)
+#define REG_SDIO_HISR_GTINT3_IND		BIT(21)
+#define REG_SDIO_HISR_GTINT4_IND		BIT(22)
+#define REG_SDIO_HISR_PSTIMEOUT			BIT(23)
+#define REG_SDIO_HISR_OCPINT			BIT(24)
+#define REG_SDIO_HISR_ATIMEND			BIT(25)
+#define REG_SDIO_HISR_ATIMEND_E			BIT(26)
+#define REG_SDIO_HISR_CTWEND			BIT(27)
+/* the following two are RTL8188 SDIO Specific */
+#define REG_SDIO_HISR_MCU_ERR			BIT(28)
+#define REG_SDIO_HISR_TSF_BIT32_TOGGLE		BIT(29)
+
+/* HCI Current Power Mode */
+#define REG_SDIO_HCPWM				(SDIO_LOCAL_OFFSET + 0x0019)
+/* RXDMA Request Length */
+#define REG_SDIO_RX0_REQ_LEN			(SDIO_LOCAL_OFFSET + 0x001C)
+/* OQT Free Page */
+#define REG_SDIO_OQT_FREE_PG			(SDIO_LOCAL_OFFSET + 0x001E)
+/* Free Tx Buffer Page */
+#define REG_SDIO_FREE_TXPG			(SDIO_LOCAL_OFFSET + 0x0020)
+/* HCI Current Power Mode 1 */
+#define REG_SDIO_HCPWM1				(SDIO_LOCAL_OFFSET + 0x0024)
+/* HCI Current Power Mode 2 */
+#define REG_SDIO_HCPWM2				(SDIO_LOCAL_OFFSET + 0x0026)
+/* Free Tx Page Sequence */
+#define REG_SDIO_FREE_TXPG_SEQ			(SDIO_LOCAL_OFFSET + 0x0028)
+/* HTSF Informaion */
+#define REG_SDIO_HTSFR_INFO			(SDIO_LOCAL_OFFSET + 0x0030)
+#define REG_SDIO_HCPWM1_V2			(SDIO_LOCAL_OFFSET + 0x0038)
+/* H2C */
+#define REG_SDIO_H2C				(SDIO_LOCAL_OFFSET + 0x0060)
+/* HCI Request Power Mode 1 */
+#define REG_SDIO_HRPWM1				(SDIO_LOCAL_OFFSET + 0x0080)
+/* HCI Request Power Mode 2 */
+#define REG_SDIO_HRPWM2				(SDIO_LOCAL_OFFSET + 0x0082)
+/* HCI Power Save Clock */
+#define REG_SDIO_HPS_CLKR			(SDIO_LOCAL_OFFSET + 0x0084)
+/* SDIO HCI Suspend Control */
+#define REG_SDIO_HSUS_CTRL			(SDIO_LOCAL_OFFSET + 0x0086)
+/* SDIO Host Extension Interrupt Mask Always */
+#define REG_SDIO_HIMR_ON			(SDIO_LOCAL_OFFSET + 0x0090)
+/* SDIO Host Extension Interrupt Status Always */
+#define REG_SDIO_HISR_ON			(SDIO_LOCAL_OFFSET + 0x0091)
+
+#define REG_SDIO_INDIRECT_REG_CFG		(SDIO_LOCAL_OFFSET + 0x0040)
+#define REG_SDIO_INDIRECT_REG_DATA		(SDIO_LOCAL_OFFSET + 0x0044)
+
+/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */
+#define REG_SDIO_CMD_ADDR_MSK			GENMASK(16, 13)
+#define REG_SDIO_CMD_ADDR_SDIO_REG		0
+#define REG_SDIO_CMD_ADDR_MAC_REG		8
+#define REG_SDIO_CMD_ADDR_TXFF_HIGH		4
+#define REG_SDIO_CMD_ADDR_TXFF_LOW		6
+#define REG_SDIO_CMD_ADDR_TXFF_NORMAL		5
+#define REG_SDIO_CMD_ADDR_TXFF_EXTRA		7
+#define REG_SDIO_CMD_ADDR_RXFF			7
+
+#define RTW_SDIO_BLOCK_SIZE			512
+#define RTW_SDIO_ADDR_RX_RX0FF_GEN(_id)		(0x0e000 | ((_id) & 0x3))
+
+#define RTW_SDIO_DATA_PTR_ALIGN			8
+
+struct sdio_func;
+struct sdio_device_id;
+
+struct rtw_sdio_tx_data {
+	u8 sn;
+};
+
+struct rtw_sdio_work_data {
+	struct work_struct work;
+	struct rtw_dev *rtwdev;
+};
+
+struct rtw_sdio {
+	struct sdio_func *sdio_func;
+
+	u32 irq_mask;
+	u8 rx_addr;
+	bool sdio3_bus_mode;
+	bool is_powered_on;
+
+	void *irq_thread;
+
+	struct workqueue_struct *txwq;
+
+	struct sk_buff_head tx_queue[RTK_MAX_TX_QUEUE_NUM];
+	struct rtw_sdio_work_data *tx_handler_data;
+};
+
+extern const struct dev_pm_ops rtw_sdio_pm_ops;
+
+int rtw_sdio_probe(struct sdio_func *sdio_func,
+		   const struct sdio_device_id *id);
+void rtw_sdio_remove(struct sdio_func *sdio_func);
+void rtw_sdio_shutdown(struct device *dev);
+
+static inline bool rtw_sdio_is_sdio30_supported(struct rtw_dev *rtwdev)
+{
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+
+	return rtwsdio->sdio3_bus_mode;
+}
+
+#endif