diff mbox series

[1/2] mmc: jz4740: Work around bug on JZ4760(B)

Message ID 20230131210229.68129-1-paul@crapouillou.net (mailing list archive)
State New, archived
Headers show
Series [1/2] mmc: jz4740: Work around bug on JZ4760(B) | expand

Commit Message

Paul Cercueil Jan. 31, 2023, 9:02 p.m. UTC
On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
rate is set to 50 MHz, even though the controller officially does
support it.

Until the actual bug is found and fixed, limit the maximum clock rate to
24 MHz.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/mmc/host/jz4740_mmc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Ulf Hansson Feb. 13, 2023, 11:48 p.m. UTC | #1
On Tue, 31 Jan 2023 at 22:02, Paul Cercueil <paul@crapouillou.net> wrote:
>
> On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
> rate is set to 50 MHz, even though the controller officially does
> support it.
>
> Until the actual bug is found and fixed, limit the maximum clock rate to
> 24 MHz.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Applied for fixes and by adding a stable tag, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/jz4740_mmc.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
> index 319a2a79c9a0..eb8e9607b086 100644
> --- a/drivers/mmc/host/jz4740_mmc.c
> +++ b/drivers/mmc/host/jz4740_mmc.c
> @@ -1104,6 +1104,16 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
>         mmc->ops = &jz4740_mmc_ops;
>         if (!mmc->f_max)
>                 mmc->f_max = JZ_MMC_CLK_RATE;
> +
> +       /*
> +        * There seems to be a problem with this driver on the JZ4760 and
> +        * JZ4760B SoCs. There, when using the maximum rate supported (50 MHz),
> +        * the communication fails with many SD cards.
> +        * Until this bug is sorted out, limit the maximum rate to 24 MHz.
> +        */
> +       if (host->version == JZ_MMC_JZ4760 && mmc->f_max > JZ_MMC_CLK_RATE)
> +               mmc->f_max = JZ_MMC_CLK_RATE;
> +
>         mmc->f_min = mmc->f_max / 128;
>         mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
>
> --
> 2.39.1
>
diff mbox series

Patch

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 319a2a79c9a0..eb8e9607b086 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -1104,6 +1104,16 @@  static int jz4740_mmc_probe(struct platform_device* pdev)
 	mmc->ops = &jz4740_mmc_ops;
 	if (!mmc->f_max)
 		mmc->f_max = JZ_MMC_CLK_RATE;
+
+	/*
+	 * There seems to be a problem with this driver on the JZ4760 and
+	 * JZ4760B SoCs. There, when using the maximum rate supported (50 MHz),
+	 * the communication fails with many SD cards.
+	 * Until this bug is sorted out, limit the maximum rate to 24 MHz.
+	 */
+	if (host->version == JZ_MMC_JZ4760 && mmc->f_max > JZ_MMC_CLK_RATE)
+		mmc->f_max = JZ_MMC_CLK_RATE;
+
 	mmc->f_min = mmc->f_max / 128;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;