From patchwork Fri May 12 10:45:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Shih X-Patchwork-Id: 13239112 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B61B4C77B7C for ; Fri, 12 May 2023 10:47:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240867AbjELKre (ORCPT ); Fri, 12 May 2023 06:47:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46876 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240886AbjELKr3 (ORCPT ); Fri, 12 May 2023 06:47:29 -0400 Received: from mail-pf1-x429.google.com (mail-pf1-x429.google.com [IPv6:2607:f8b0:4864:20::429]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C0FC71328F; Fri, 12 May 2023 03:47:09 -0700 (PDT) Received: by mail-pf1-x429.google.com with SMTP id d2e1a72fcca58-6439b410679so6454842b3a.0; Fri, 12 May 2023 03:47:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1683888429; x=1686480429; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=1SxJIzq87qXobHcRTYWJbit5Nqj1d0fM2PeE32DSP2o=; b=INylud/BwUoM3kM5fNBMkglS5/fFPux/505IKyajC/h4rmZOPjGkS6ctbzwsuPglnI OG/5kj8Joc56PXESHK2iwjdTpOEMhqDA5EAnTzlUVuqdtEXXvTxQQ7pF6Ny4XKQy5rKD AsIgdGGOzzS15qhRGtDZFRGVg55Ne7TCJpCwxbLZBTGvPQTV3HvxULkIBYrOZjBM2aZp 2+kelVH9ybj0/+KwjyoMQUsm1aKTfjcoQqNxjeNATdJ9FZ6htdwLrFWEHr0G0S676ke9 z8Z2oKT9xvLKrIFp7ua+v5+8SrMUFENgwCWXyLXdsEgUtj0LmB2PYj1Y0LjpzIordtBQ VpJw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683888429; x=1686480429; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=1SxJIzq87qXobHcRTYWJbit5Nqj1d0fM2PeE32DSP2o=; b=HaRkZeM5artj3QufdekTlxhocGznKPWircu2DVidFJ9qgBJpbFyeRySt39VGgA7tEg fwBuA/m6+JtSf0O3eCyQ4knH3oyIt/vZm/eB9pcoeh+S5Uh96ZGEmumqNw00Oa04CXsV gFUfDHEFqSwZ72YAMy3QFQdmoq9h1TbEiDDttXYGdCKgvT1nxVRYvE6TF6dqpeBxa5Xe jIp5H/sWjtHhtGyO5JrWLnilTJdbxKSkirGktSm7DZ8Wx01fo+gh+ssP+L2Ql1IWZdQ2 dY19ZO/qAjGJz9Pmvsv3kKHooISlVQhzenbSrUAaRKVa8A1ATeyrCIw4PsrsFIimnZvy 2ckA== X-Gm-Message-State: AC+VfDw7RSA7Tv/a/32nwJYBLrKwuUilU8Mht0/eo93FVLADgOQTJL3t SHZMgkYTBZJq9iX6GwGqiMg= X-Google-Smtp-Source: ACHHUZ6+l2iYZzQ98ay23WSFTWKHqp+KvKBUKNDfy9s5FBsL016Y67dzF2WhP0ec7Zfqo+GQzupHVg== X-Received: by 2002:a05:6a00:1a06:b0:63b:8423:9e31 with SMTP id g6-20020a056a001a0600b0063b84239e31mr29843428pfv.11.1683888429093; Fri, 12 May 2023 03:47:09 -0700 (PDT) Received: from localhost.localdomain (2001-b400-e2ae-0f1d-f6c2-46f4-c62f-3944.emome-ip6.hinet.net. [2001:b400:e2ae:f1d:f6c2:46f4:c62f:3944]) by smtp.gmail.com with ESMTPSA id g17-20020aa78751000000b0064358d032a4sm7019268pfo.145.2023.05.12.03.47.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 12 May 2023 03:47:08 -0700 (PDT) From: Victor Shih X-Google-Original-From: Victor Shih To: ulf.hansson@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org, dlunev@chromium.org, Victor Shih , Ben Chuang Subject: [PATCH V1 1/3] mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support Date: Fri, 12 May 2023 18:45:57 +0800 Message-Id: <20230512104559.11218-2-victor.shih@genesyslogic.com.tw> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230512104559.11218-1-victor.shih@genesyslogic.com.tw> References: <20230512104559.11218-1-victor.shih@genesyslogic.com.tw> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org Add support for the GL9767 chipset. GL9767 supports SD3 mode likes UHS-I SDR50, SDR104. Enable MSI interrupt for GL9767. Some platform do not support PCI INTx and devices can not work without interrupt. Signed-off-by: Ben Chuang Signed-off-by: Victor Shih --- drivers/mmc/host/sdhci-pci-core.c | 1 + drivers/mmc/host/sdhci-pci-gli.c | 132 ++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-pci.h | 2 + 3 files changed, 135 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 01975d145200..1c2572c0f012 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1903,6 +1903,7 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(GLI, 9750, gl9750), SDHCI_PCI_DEVICE(GLI, 9755, gl9755), SDHCI_PCI_DEVICE(GLI, 9763E, gl9763e), + SDHCI_PCI_DEVICE(GLI, 9767, gl9767), SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd), /* Generic SD host controller */ {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)}, diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 633a8ee8f8c5..300512740cb0 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -149,6 +149,32 @@ #define PCI_GLI_9755_PM_CTRL 0xFC #define PCI_GLI_9755_PM_STATE GENMASK(1, 0) +#define SDHCI_GLI_9767_GM_BURST_SIZE 0x510 +#define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8) + +#define PCIE_GLI_9767_VHS 0x884 +#define GLI_9767_VHS_REV GENMASK(19, 16) +#define GLI_9767_VHS_REV_R 0x0 +#define GLI_9767_VHS_REV_M 0x1 +#define GLI_9767_VHS_REV_W 0x2 + +#define PCIE_GLI_9767_PWR_MACRO_CTL 0x8D0 +#define PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE GENMASK(3, 0) +#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE GENMASK(15, 12) +#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE 0x7 +#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL GENMASK(29, 28) +#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE 0x3 + +#define PCIE_GLI_9767_SCR 0x8E0 +#define PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST BIT(6) +#define PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST BIT(7) +#define PCIE_GLI_9767_SCR_AXI_REQ BIT(9) +#define PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN BIT(10) +#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 BIT(16) +#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 BIT(17) +#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21) +#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30) + #define GLI_MAX_TUNING_LOOP 40 /* Genesys Logic chipset */ @@ -693,6 +719,61 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot) gl9755_wt_off(pdev); } +static void gli_set_9767(struct sdhci_host *host) +{ + u32 value; + + value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE); + value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET; + sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE); +} + +static void gl9767_hw_setting(struct sdhci_pci_slot *slot) +{ + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &value); + value &= ~GLI_9767_VHS_REV; + value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_W); + pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, value); + + pci_read_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, &value); + value &= ~(PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE | + PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE | + PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL); + + value |= PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE | + FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE, + PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE) | + FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL, + PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE); + pci_write_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, value); + + pci_read_config_dword(pdev, PCIE_GLI_9767_SCR, &value); + value &= ~(PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 | + PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 | + PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN); + + value |= PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST | + PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST | + PCIE_GLI_9767_SCR_AXI_REQ | + PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN | + PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF; + pci_write_config_dword(pdev, PCIE_GLI_9767_SCR, value); + + pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &value); + value &= ~GLI_9767_VHS_REV; + value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_R); + pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, value); +} + +static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + gli_set_9767(host); +} + static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) { struct sdhci_host *host = slot->host; @@ -717,6 +798,19 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) return 0; } +static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot) +{ + struct sdhci_host *host = slot->host; + + gli_set_9767(host); + gl9767_hw_setting(slot); + gli_pcie_enable_msi(slot); + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + sdhci_enable_v4_mode(host); + + return 0; +} + static void sdhci_gli_voltage_switch(struct sdhci_host *host) { /* @@ -740,6 +834,25 @@ static void sdhci_gli_voltage_switch(struct sdhci_host *host) usleep_range(100000, 110000); } +static void sdhci_gl9767_voltage_switch(struct sdhci_host *host) +{ + /* + * According to Section 3.6.1 signal voltage switch procedure in + * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as + * follows: + * (6) Set 1.8V Signal Enable in the Host Control 2 register. + * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this + * period. + * (8) If 1.8V Signal Enable is cleared by Host Controller, go to + * step (12). + * + * Wait 5ms after set 1.8V signal enable in Host Control 2 register + * to ensure 1.8V signal enable bit is set by GL9767. + * + */ + usleep_range(5000, 5500); +} + static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) { sdhci_reset(host, mask); @@ -1150,3 +1263,22 @@ const struct sdhci_pci_fixes sdhci_gl9763e = { #endif .add_host = gl9763e_add_host, }; + +static const struct sdhci_ops sdhci_gl9767_ops = { + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_gl9767_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .voltage_switch = sdhci_gl9767_voltage_switch, +}; + +const struct sdhci_pci_fixes sdhci_gl9767 = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = gli_probe_slot_gl9767, + .ops = &sdhci_gl9767_ops, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_pci_gli_resume, +#endif +}; diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 3661a224fb04..9c8863956381 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -76,6 +76,7 @@ #define PCI_DEVICE_ID_GLI_9755 0x9755 #define PCI_DEVICE_ID_GLI_9750 0x9750 #define PCI_DEVICE_ID_GLI_9763E 0xe763 +#define PCI_DEVICE_ID_GLI_9767 0x9767 /* * PCI device class and mask @@ -195,5 +196,6 @@ extern const struct sdhci_pci_fixes sdhci_o2; extern const struct sdhci_pci_fixes sdhci_gl9750; extern const struct sdhci_pci_fixes sdhci_gl9755; extern const struct sdhci_pci_fixes sdhci_gl9763e; +extern const struct sdhci_pci_fixes sdhci_gl9767; #endif /* __SDHCI_PCI_H */