diff mbox series

[v2,13/45] dt-bindings: atmel-sysreg: add bindings for sam9x7

Message ID 20230623203056.689705-14-varshini.rajendran@microchip.com (mailing list archive)
State New, archived
Headers show
Series Add support for sam9x7 SoC family | expand

Commit Message

Varshini Rajendran June 23, 2023, 8:30 p.m. UTC
Add RAM controller, shutdown controller & SFR DT bindings.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski June 24, 2023, 8 a.m. UTC | #1
On 23/06/2023 22:30, Varshini Rajendran wrote:
> Add RAM controller, shutdown controller & SFR DT bindings.

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.

Applies to every patch, since there will be a v3.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index ab1b352344ae..1e7349987d77 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -11,7 +11,7 @@  PIT Timer required properties:
   shared across all System Controller members.
 
 PIT64B Timer required properties:
-- compatible: Should be "microchip,sam9x60-pit64b"
+- compatible: Should be "microchip,sam9x60-pit64b" or "microchip,sam9x7-pit64b"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for PIT64B timer
 - clocks: Should contain the available clock sources for PIT64B timer.
@@ -31,6 +31,7 @@  RAMC SDRAM/DDR Controller required properties:
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",
 			"microchip,sam9x60-ddramc",
+			"microchip,sam9x7-ddramc",
 			"microchip,sama7g5-uddrc"
 - reg: Should contain registers location and length
 
@@ -89,7 +90,7 @@  SHDWC SAMA5D2-Compatible Shutdown Controller
 
 required properties:
 - compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
-  "microchip,sama7g5-shdwc"
+  "microchip,sama7g5-shdwc" or "microchip,sam9x7-shdwc"
 - reg: should contain registers location and length
 - clocks: phandle to input clock.
 - #address-cells: should be one. The cell is the wake-up input index.
@@ -156,7 +157,7 @@  required properties:
 - compatible: Should be "atmel,<chip>-sfr", "syscon" or
 	"atmel,<chip>-sfrbu", "syscon"
   <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-  It also can be "microchip,sam9x60-sfr", "syscon".
+  It also can be "microchip,sam9x60-sfr" or "microchip,sam9x7-sfr", "syscon".
 - reg: Should contain registers location and length
 
 	sfr@f0038000 {