diff mbox series

[V9,06/23] mmc: core: Support UHS-II card control and access

Message ID 20230721101349.12387-7-victorshihgli@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add support UHS-II for GL9755 | expand

Commit Message

Victor Shih July 21, 2023, 10:13 a.m. UTC
From: Victor Shih <victor.shih@genesyslogic.com.tw>

Embed UHS-II access/control functionality into the MMC request
processing flow.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---

Updates in V8:
 - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
 - Modify return value in sd_uhs2_attach().

Updates in V7:
 - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
 - Drop uhs2_state in favor of ios->timing.
 - Remove unnecessary functions.

---

 drivers/mmc/core/block.c   |   18 +-
 drivers/mmc/core/core.c    |    8 +
 drivers/mmc/core/mmc_ops.c |   25 +-
 drivers/mmc/core/mmc_ops.h |    1 +
 drivers/mmc/core/sd.c      |   13 +-
 drivers/mmc/core/sd.h      |    4 +
 drivers/mmc/core/sd_ops.c  |   11 +
 drivers/mmc/core/sd_ops.h  |   18 +
 drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
 9 files changed, 1176 insertions(+), 59 deletions(-)

Comments

Adrian Hunter July 31, 2023, 3:29 p.m. UTC | #1
On 21/07/23 13:13, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
> 
> Embed UHS-II access/control functionality into the MMC request
> processing flow.
> 
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> 
> Updates in V8:
>  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
>  - Modify return value in sd_uhs2_attach().
> 
> Updates in V7:
>  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
>  - Drop uhs2_state in favor of ios->timing.
>  - Remove unnecessary functions.
> 
> ---
> 
>  drivers/mmc/core/block.c   |   18 +-
>  drivers/mmc/core/core.c    |    8 +
>  drivers/mmc/core/mmc_ops.c |   25 +-
>  drivers/mmc/core/mmc_ops.h |    1 +
>  drivers/mmc/core/sd.c      |   13 +-
>  drivers/mmc/core/sd.h      |    4 +
>  drivers/mmc/core/sd_ops.c  |   11 +
>  drivers/mmc/core/sd_ops.h  |   18 +
>  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
>  9 files changed, 1176 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index f701efb1fa78..6617ae9fc840 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
>  
>  	struct scatterlist sg;
>  
> -	cmd.opcode = MMC_APP_CMD;
> -	cmd.arg = card->rca << 16;
> -	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> -
> -	err = mmc_wait_for_cmd(card->host, &cmd, 0);
> -	if (err)
> -		return err;
> -	if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> -		return -EIO;
> +	err = mmc_app_cmd(card->host, card);
> +		if (err)
> +			return err;
>  
>  	memset(&cmd, 0, sizeof(struct mmc_command));
>  
> @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>  	struct request *req = mmc_queue_req_to_req(mqrq);
>  	struct mmc_blk_data *md = mq->blkdata;
>  	bool do_rel_wr, do_data_tag;
> +	bool do_multi;
> +
> +	do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
>  
>  	mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
>  
> @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>  		brq->cmd.arg <<= 9;
>  	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
>  
> -	if (brq->data.blocks > 1 || do_rel_wr) {
> +	if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
>  		/* SPI multiblock writes terminate using a special
>  		 * token, not a STOP_TRANSMISSION request.
>  		 */
> @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>  		brq->mrq.stop = NULL;
>  		readcmd = MMC_READ_SINGLE_BLOCK;
>  		writecmd = MMC_WRITE_BLOCK;
> +		brq->cmd.uhs2_tmode0_flag = 1;
>  	}
>  	brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
>  
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index ba8808cd9318..f5dc653eafb0 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -334,6 +334,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
>  
>  int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
>  {
> +	struct uhs2_command uhs2_cmd;
> +	__be32 payload[4]; /* for maximum size */
>  	int err;
>  
>  	init_completion(&mrq->cmd_completion);
> @@ -351,6 +353,8 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
>  	if (err)
>  		return err;
>  
> +	mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> +
>  	led_trigger_event(host->led, LED_FULL);
>  	__mmc_start_request(host, mrq);

Same comment as for V8:

Refer:
https://lore.kernel.org/linux-mmc/047c746f-0787-37ec-7989-cd932f288564@intel.com/


__mmc_start_request() is also called by mmc_wait_for_req_done()
but uhs2_cmd is local to mmc_start_request(), so if mmc_wait_for_req_done()
is ever called in UHS2 case with cmd->retries, it looks like
host controller might try to access uhs2_cmd which is no
longer valid?

There is perhaps mmc_send_status() used in block.c ?

Need to get Ulf's view, but putting "struct uhs2_command uhs2_cmd"
and "__be32 payload[4]" in struct mmc_command or struct mmc_request
would seem to be options.  If size is a concern, some optimization
to reduce the size of struct uhs2_command looks possible, and is
max payload len actually only 2 at the moment.

>  
> @@ -430,6 +434,8 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
>   */
>  int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
>  {
> +	struct uhs2_command uhs2_cmd;
> +	__be32 payload[4]; /* for maximum size */
>  	int err;
>  
>  	/*
> @@ -450,6 +456,8 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
>  	if (err)
>  		goto out_err;
>  
> +	mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> +
>  	err = host->cqe_ops->cqe_request(host, mrq);
>  	if (err)
>  		goto out_err;
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 3b3adbddf664..8ae205a07f9b 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -144,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host)
>  	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
>  }
>  
> +int __mmc_go_idle(struct mmc_host *host)
> +{
> +	struct mmc_command cmd = {};
> +	int err;
> +
> +	cmd.opcode = MMC_GO_IDLE_STATE;
> +	cmd.arg = 0;
> +	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	mmc_delay(1);
> +
> +	return err;
> +}
> +
>  int mmc_go_idle(struct mmc_host *host)
>  {
>  	int err;
> -	struct mmc_command cmd = {};
>  
>  	/*
>  	 * Non-SPI hosts need to prevent chipselect going active during
> @@ -163,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host)
>  		mmc_delay(1);
>  	}
>  
> -	cmd.opcode = MMC_GO_IDLE_STATE;
> -	cmd.arg = 0;
> -	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> -
> -	err = mmc_wait_for_cmd(host, &cmd, 0);
> -
> -	mmc_delay(1);
> +	err = __mmc_go_idle(host);
>  
>  	if (!mmc_host_is_spi(host)) {
>  		mmc_set_chip_select(host, MMC_CS_DONTCARE);
> @@ -300,6 +308,7 @@ int mmc_send_adtc_data(struct mmc_card *card, struct mmc_host *host, u32 opcode,
>  	 * not R1 plus a data block.
>  	 */
>  	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> +	cmd.uhs2_tmode0_flag = 1;
>  
>  	data.blksz = len;
>  	data.blocks = 1;
> diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> index 09ffbc00908b..abda7492d578 100644
> --- a/drivers/mmc/core/mmc_ops.h
> +++ b/drivers/mmc/core/mmc_ops.h
> @@ -25,6 +25,7 @@ struct mmc_command;
>  int mmc_select_card(struct mmc_card *card);
>  int mmc_deselect_cards(struct mmc_host *host);
>  int mmc_set_dsr(struct mmc_host *host);
> +int __mmc_go_idle(struct mmc_host *host);
>  int mmc_go_idle(struct mmc_host *host);
>  int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
>  int mmc_set_relative_addr(struct mmc_card *card);
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 246ce027ae0a..15e465f0cc3f 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -207,7 +207,7 @@ static int mmc_decode_csd(struct mmc_card *card)
>  /*
>   * Given a 64-bit response, decode to our card SCR structure.
>   */
> -static int mmc_decode_scr(struct mmc_card *card)
> +int mmc_decode_scr(struct mmc_card *card)
>  {
>  	struct sd_scr *scr = &card->scr;
>  	unsigned int scr_struct;
> @@ -904,7 +904,7 @@ int mmc_sd_get_csd(struct mmc_card *card)
>  	return 0;
>  }
>  
> -static int mmc_sd_get_ro(struct mmc_host *host)
> +int mmc_sd_get_ro(struct mmc_host *host)
>  {
>  	int ro;
>  
> @@ -1616,11 +1616,6 @@ static void mmc_sd_detect(struct mmc_host *host)
>  	}
>  }
>  
> -static int sd_can_poweroff_notify(struct mmc_card *card)
> -{
> -	return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> -}
> -
>  static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
>  {
>  	struct sd_busy_data *data = cb_data;
> @@ -1644,7 +1639,7 @@ static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
>  	return 0;
>  }
>  
> -static int sd_poweroff_notify(struct mmc_card *card)
> +int sd_poweroff_notify(struct mmc_card *card)
>  {
>  	struct sd_busy_data cb_data;
>  	u8 *reg_buf;
> @@ -1692,7 +1687,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
>  	if (mmc_card_suspended(card))
>  		goto out;
>  
> -	if (sd_can_poweroff_notify(card))
> +	if (mmc_sd_can_poweroff_notify(card))
>  		err = sd_poweroff_notify(card);
>  	else if (!mmc_host_is_spi(host))
>  		err = mmc_deselect_cards(host);
> diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
> index 1af5a038bae9..d31259919ee5 100644
> --- a/drivers/mmc/core/sd.h
> +++ b/drivers/mmc/core/sd.h
> @@ -11,10 +11,14 @@ struct mmc_card;
>  
>  int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
>  int mmc_sd_get_csd(struct mmc_card *card);
> +int mmc_sd_get_ro(struct mmc_host *host);
>  void mmc_decode_cid(struct mmc_card *card);
>  int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
>  	bool reinit);
>  unsigned mmc_sd_get_max_clock(struct mmc_card *card);
>  int mmc_sd_switch_hs(struct mmc_card *card);
>  
> +/* These call back functions were also used by UHS2 sd card */
> +int sd_poweroff_notify(struct mmc_card *card);
> +
>  #endif
> diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
> index ef8d1dce5af1..1f9580491ad0 100644
> --- a/drivers/mmc/core/sd_ops.c
> +++ b/drivers/mmc/core/sd_ops.c
> @@ -27,6 +27,15 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
>  	if (WARN_ON(card && card->host != host))
>  		return -EINVAL;
>  
> +	/*
> +	 * UHS2 packet has APP bit so only set APP_CMD flag here.
> +	 * Will set the APP bit when assembling UHS2 packet.
> +	 */
> +	if (host->flags & MMC_UHS2_SD_TRAN) {
> +		host->uhs2_app_cmd = true;
> +		return 0;
> +	}
> +
>  	cmd.opcode = MMC_APP_CMD;
>  
>  	if (card) {
> @@ -281,6 +290,7 @@ int mmc_app_send_scr(struct mmc_card *card)
>  	cmd.opcode = SD_APP_SEND_SCR;
>  	cmd.arg = 0;
>  	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> +	cmd.uhs2_tmode0_flag = 1;
>  
>  	data.blksz = 8;
>  	data.blocks = 1;
> @@ -344,6 +354,7 @@ int mmc_app_sd_status(struct mmc_card *card, void *ssr)
>  	cmd.opcode = SD_APP_SD_STATUS;
>  	cmd.arg = 0;
>  	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
> +	cmd.uhs2_tmode0_flag = 1;
>  
>  	data.blksz = 64;
>  	data.blocks = 1;
> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
> index 3ba7b3cf4652..8c2da57ca2c2 100644
> --- a/drivers/mmc/core/sd_ops.h
> +++ b/drivers/mmc/core/sd_ops.h
> @@ -11,6 +11,7 @@
>  #include <linux/types.h>
>  
>  struct mmc_card;
> +struct mmc_command;
>  struct mmc_host;
>  
>  int mmc_app_set_bus_width(struct mmc_card *card, int width);
> @@ -19,10 +20,27 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
>  int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr);
>  int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
>  int mmc_app_send_scr(struct mmc_card *card);
> +int mmc_decode_scr(struct mmc_card *card);
>  int mmc_sd_switch(struct mmc_card *card, int mode, int group,
>  	u8 value, u8 *resp);
>  int mmc_app_sd_status(struct mmc_card *card, void *ssr);
>  int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
> +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
> +
> +static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq,
> +					     struct uhs2_command uhs2_cmd, __be32 payload[4])
> +{
> +	if (host->flags & MMC_UHS2_SD_TRAN) {
> +		uhs2_cmd.payload = payload;
> +		mrq->cmd->uhs2_cmd = &uhs2_cmd;
> +		mmc_uhs2_prepare_cmd(host, mrq);
> +	}
> +}
> +
> +static inline int mmc_sd_can_poweroff_notify(struct mmc_card *card)
> +{
> +	return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> +}
>  
>  #endif
>  
> diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
> index 06b2aab52b93..0a1b00b59499 100644
> --- a/drivers/mmc/core/sd_uhs2.c
> +++ b/drivers/mmc/core/sd_uhs2.c
> @@ -1,23 +1,51 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
>   * Copyright (C) 2021 Linaro Ltd
> - *
>   * Author: Ulf Hansson <ulf.hansson@linaro.org>
>   *
> + * Copyright (C) 2014 Intel Corp, All Rights Reserved.
> + * Author: Yi Sun <yi.y.sun@intel.com>
> + *
> + * Copyright (C) 2020 Genesys Logic, Inc.
> + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> + *
> + * Copyright (C) 2020 Linaro Limited
> + * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
> + *
> + * Copyright (C) 2022 Genesys Logic, Inc.
> + * Authors: Jason Lai <jason.lai@genesyslogic.com.tw>
> + *
> + * Copyright (C) 2023 Genesys Logic, Inc.
> + * Authors: Victor Shih <victor.shih@genesyslogic.com.tw>
> + *
>   * Support for SD UHS-II cards
>   */
>  #include <linux/err.h>
> +#include <linux/pm_runtime.h>
>  
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/card.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/sd.h>
> +#include <linux/mmc/sd_uhs2.h>
>  
> +#include "card.h"
>  #include "core.h"
>  #include "bus.h"
>  #include "sd.h"
> +#include "sd_ops.h"
>  #include "mmc_ops.h"
>  
> +#define UHS2_WAIT_CFG_COMPLETE_PERIOD_US  (1 * 1000) /* 1ms */
> +#define UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS 100        /* 100ms */
> +
>  static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 };
>  
> +struct sd_uhs2_wait_active_state_data {
> +	struct mmc_host *host;
> +	struct mmc_command *cmd;
> +};
> +
>  static int sd_uhs2_power_up(struct mmc_host *host)
>  {
>  	int err;
> @@ -50,6 +78,43 @@ static int sd_uhs2_power_off(struct mmc_host *host)
>  	return host->ops->uhs2_control(host, UHS2_SET_IOS);
>  }
>  
> +/*
> + * sd_uhs2_cmd_assemble() - build up UHS-II command packet which is embedded in
> + *                          mmc_command structure
> + * @cmd:	MMC command to executed
> + * @uhs2_cmd:	UHS2 command corresponded to MMC command
> + * @header:	Header field of UHS-II command cxpacket
> + * @arg:	Argument field of UHS-II command packet
> + * @payload:	Payload field of UHS-II command packet
> + * @plen:	Payload length
> + * @resp:	Response buffer is allocated by caller and it is used to keep
> + *              the response of CM-TRAN command. For SD-TRAN command, uhs2_resp
> + *              should be null and SD-TRAN command response should be stored in
> + *              resp of mmc_command.
> + * @resp_len:	Response buffer length
> + *
> + * The uhs2_command structure contains message packets which are transmited/
> + * received on UHS-II bus. This function fills in the contents of uhs2_command
> + * structure and embededs UHS2 command into mmc_command structure, which is used
> + * in legacy SD operation functions.
> + *
> + */
> +static void sd_uhs2_cmd_assemble(struct mmc_command *cmd,
> +				 struct uhs2_command *uhs2_cmd,
> +				 u16 header, u16 arg, __be32 *payload,
> +				 u8 plen, u8 *resp, u8 resp_len)
> +{
> +	uhs2_cmd->header = header;
> +	uhs2_cmd->arg = arg;
> +	uhs2_cmd->payload = payload;
> +	uhs2_cmd->payload_len = plen * sizeof(u32);
> +	uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4;
> +
> +	cmd->uhs2_cmd = uhs2_cmd;
> +	cmd->uhs2_resp = resp;
> +	cmd->uhs2_resp_len = resp_len;
> +}
> +
>  /*
>   * Run the phy initialization sequence, which mainly relies on the UHS-II host
>   * to check that we reach the expected electrical state, between the host and
> @@ -57,7 +122,15 @@ static int sd_uhs2_power_off(struct mmc_host *host)
>   */
>  static int sd_uhs2_phy_init(struct mmc_host *host)
>  {
> -	return 0;
> +	int err = 0;
> +
> +	err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> +	if (err) {
> +		pr_err("%s: failed to initial phy for UHS-II!\n",
> +		       mmc_hostname(host));
> +	}
> +
> +	return err;
>  }
>  
>  /*
> @@ -66,6 +139,82 @@ static int sd_uhs2_phy_init(struct mmc_host *host)
>   */
>  static int sd_uhs2_dev_init(struct mmc_host *host)
>  {
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	u32 cnt;
> +	u32 dap, gap, resp_gap;
> +	u16 header, arg;
> +	__be32 payload[UHS2_DEV_INIT_PAYLOAD_LEN];
> +	u8 gd = 0;
> +	u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> +	int err;
> +
> +	dap = host->uhs2_caps.dap;
> +	gap = host->uhs2_caps.gap;
> +
> +	/*
> +	 * Refer to UHS-II Addendum Version 1.02 Figure 6-21 to see DEVICE_INIT CCMD format.
> +	 * Head:
> +	 *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> +	 *      - IOADR = CMD_BASE + 002h
> +	 * Payload:
> +	 *      - bit [3:0]  : GAP(Group Allocated Power)
> +	 *      - bit [7:4]  : GD(Group Descriptor)
> +	 *      - bit [11]   : Complete Flag
> +	 *      - bit [15:12]: DAP(Device Allocated Power)
> +	 */
> +	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> +	arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_WRITE |
> +	       UHS2_NATIVE_CMD_PLEN_4B |
> +	       (UHS2_DEV_CMD_DEVICE_INIT >> 8);
> +
> +	/*
> +	 * Refer to UHS-II Addendum Version 1.02 section 6.3.1.
> +	 * Max. time from DEVICE_INIT CCMD EOP reception on Device
> +	 * Rx to its SOP transmission on Device Tx(Tfwd_init_cmd) is
> +	 * 1 second.
> +	 */
> +	cmd.busy_timeout = 1000;
> +
> +	/*
> +	 * Refer to UHS-II Addendum Version 1.02 section 6.2.6.3.
> +	 * When the number of the DEVICE_INIT commands is reach to
> +	 * 30 tiems, Host shall stop issuing DEVICE_INIT command
> +	 * and regard it as an error.
> +	 */
> +	for (cnt = 0; cnt < 30; cnt++) {
> +		payload[0] = ((dap & 0xF) << 12) |
> +			      UHS2_DEV_INIT_COMPLETE_FLAG |
> +			      ((gd & 0xF) << 4) |
> +			      (gap & 0xF);
> +
> +		sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg,
> +				     payload, UHS2_DEV_INIT_PAYLOAD_LEN,
> +				     resp, UHS2_DEV_INIT_RESP_LEN);
> +
> +		err = mmc_wait_for_cmd(host, &cmd, 0);
> +		if (err) {
> +			pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +			       mmc_hostname(host), __func__, err);
> +			return err;
> +		}
> +
> +		if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) {
> +			pr_err("%s: DEVICE_INIT response is wrong!\n",
> +			       mmc_hostname(host));
> +			return -EIO;
> +		}
> +
> +		if (resp[5] & 0x8) {
> +			host->uhs2_caps.group_desc = gd;
> +			return 0;
> +		}
> +		resp_gap = resp[4] & 0x0F;
> +		if (gap == resp_gap)
> +			gd++;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -76,6 +225,52 @@ static int sd_uhs2_dev_init(struct mmc_host *host)
>   */
>  static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
>  {
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	u16 header, arg;
> +	__be32 payload[UHS2_DEV_ENUM_PAYLOAD_LEN];
> +	u8 id_f = 0xF, id_l = 0x0;
> +	u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> +	int err;
> +
> +	/*
> +	 * Refer to UHS-II Addendum Version 1.02 Figure 6-28 to see ENUMERATE CCMD format.
> +	 * Header:
> +	 *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> +	 *      - IOADR = CMD_BASE + 003h
> +	 * Payload:
> +	 *      - bit [3:0]: ID_L(Last Node ID)
> +	 *      - bit [7:4]: ID_F(First Node ID)
> +	 */
> +	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> +	arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_WRITE |
> +	       UHS2_NATIVE_CMD_PLEN_4B |
> +	       (UHS2_DEV_CMD_ENUMERATE >> 8);
> +
> +	payload[0] = (id_f << 4) | id_l;
> +	payload[0] = cpu_to_be32(payload[0]);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_DEV_ENUM_PAYLOAD_LEN,
> +			     resp, UHS2_DEV_ENUM_RESP_LEN);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) {
> +		pr_err("%s: ENUMERATE response is wrong!\n",
> +		       mmc_hostname(host));
> +		return -EIO;
> +	}
> +
> +	id_f = (resp[4] >> 4) & 0xF;
> +	id_l = resp[4] & 0xF;
> +	*node_id = id_f;
> +
>  	return 0;
>  }
>  
> @@ -86,6 +281,181 @@ static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
>   */
>  static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
>  {
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	u16 header, arg;
> +	u32 cap;
> +	int err;
> +
> +	/*
> +	 * Use Control Read CCMD to read Generic Capability from Configuration Register.
> +	 * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> +	 * - IOADR = Generic Capability Register(CFG_BASE + 000h)
> +	 */
> +	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> +	arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_READ |
> +	       UHS2_NATIVE_CMD_PLEN_4B |
> +	       (UHS2_DEV_CONFIG_GEN_CAPS >> 8);
> +
> +	/*
> +	 * There is no payload because per spec, there should be
> +	 * no payload field for read CCMD.
> +	 * Plen is set in arg. Per spec, plen for read CCMD
> +	 * represents the len of read data which is assigned in payload
> +	 * of following RES (p136).
> +	 */
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/*
> +	 * Generic Capability Register:
> +	 * bit [7:0]  : Reserved
> +	 * bit [13:8] : Device-Specific Number of Lanes and Functionality
> +	 *              bit 8: 2L-HD
> +	 *              bit 9: 2D-1U FD
> +	 *              bit 10: 1D-2U FD
> +	 *              bit 11: 2D-2U FD
> +	 *              Others: Reserved
> +	 * bit [14]   : DADR Length
> +	 *              0: 4 bytes
> +	 *              1: Reserved
> +	 * bit [23:16]: Application Type
> +	 *              bit 16: 0=Non-SD memory, 1=SD memory
> +	 *              bit 17: 0=Non-SDIO, 1=SDIO
> +	 *              bit 18: 0=Card, 1=Embedded
> +	 * bit [63:24]: Reserved
> +	 */
> +	cap = cmd.resp[0];
> +	card->uhs2_config.n_lanes =
> +				(cap >> UHS2_DEV_CONFIG_N_LANES_POS) &
> +				UHS2_DEV_CONFIG_N_LANES_MASK;
> +	card->uhs2_config.dadr_len =
> +				(cap >> UHS2_DEV_CONFIG_DADR_POS) &
> +				UHS2_DEV_CONFIG_DADR_MASK;
> +	card->uhs2_config.app_type =
> +				(cap >> UHS2_DEV_CONFIG_APP_POS) &
> +				UHS2_DEV_CONFIG_APP_MASK;
> +
> +	/*
> +	 * Use Control Read CCMD to read PHY Capability from Configuration Register.
> +	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> +	 * - IOADR = PHY Capability Register(CFG_BASE + 002h)
> +	 */
> +	arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_READ |
> +	       UHS2_NATIVE_CMD_PLEN_8B |
> +	      (UHS2_DEV_CONFIG_PHY_CAPS >> 8);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/*
> +	 * PHY Capability Register:
> +	 * bit [3:0]  : PHY Minor Revision
> +	 * bit [5:4]  : PHY Major Revision
> +	 * bit [15]   : Support Hibernate Mode
> +	 *              0: Not support Hibernate Mode
> +	 *              1: Support Hibernate Mode
> +	 * bit [31:16]: Reserved
> +	 * bit [35:32]: Device-Specific N_LSS_SYN
> +	 * bit [39:36]: Device-Specific N_LSS_DIR
> +	 * bit [63:40]: Reserved
> +	 */
> +	cap = cmd.resp[0];
> +	card->uhs2_config.phy_minor_rev =
> +				cap & UHS2_DEV_CONFIG_PHY_MINOR_MASK;
> +	card->uhs2_config.phy_major_rev =
> +				(cap >> UHS2_DEV_CONFIG_PHY_MAJOR_POS) &
> +				 UHS2_DEV_CONFIG_PHY_MAJOR_MASK;
> +	card->uhs2_config.can_hibernate =
> +				(cap >> UHS2_DEV_CONFIG_CAN_HIBER_POS) &
> +				 UHS2_DEV_CONFIG_CAN_HIBER_MASK;
> +
> +	cap = cmd.resp[1];
> +	card->uhs2_config.n_lss_sync =
> +				cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> +	card->uhs2_config.n_lss_dir =
> +				(cap >> UHS2_DEV_CONFIG_N_LSS_DIR_POS) &
> +				UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> +	if (card->uhs2_config.n_lss_sync == 0)
> +		card->uhs2_config.n_lss_sync = 16 << 2;
> +	else
> +		card->uhs2_config.n_lss_sync <<= 2;
> +
> +	if (card->uhs2_config.n_lss_dir == 0)
> +		card->uhs2_config.n_lss_dir = 16 << 3;
> +	else
> +		card->uhs2_config.n_lss_dir <<= 3;
> +
> +	/*
> +	 * Use Control Read CCMD to read LINK/TRAN Capability from Configuration Register.
> +	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> +	 * - IOADR = LINK/TRAN Capability Register(CFG_BASE + 004h)
> +	 */
> +	arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) |
> +		UHS2_NATIVE_CMD_READ |
> +		UHS2_NATIVE_CMD_PLEN_8B |
> +		(UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/*
> +	 * LINK/TRAN Capability Register:
> +	 * bit [3:0]  : LINK_TRAN Minor Revision
> +	 * bit [5:4]  : LINK/TRAN Major Revision
> +	 * bit [7:6]  : Reserved
> +	 * bit [15:8] : Device-Specific N_FCU
> +	 * bit [18:16]: Device Type
> +	 *              001b=Host
> +	 *              010b=Device
> +	 *              011b=Reserved for CMD issuable Device
> +	 * bit [19]   : Reserved
> +	 * bit [31:20]: Device-Specific MAX_BLKLEN
> +	 * bit [39:32]: Device-Specific N_DATA_GAP
> +	 * bit [63:40]: Reserved
> +	 */
> +	cap = cmd.resp[0];
> +	card->uhs2_config.link_minor_rev =
> +				cap & UHS2_DEV_CONFIG_LT_MINOR_MASK;
> +	card->uhs2_config.link_major_rev =
> +				(cap >> UHS2_DEV_CONFIG_LT_MAJOR_POS) &
> +				UHS2_DEV_CONFIG_LT_MAJOR_MASK;
> +	card->uhs2_config.n_fcu =
> +				(cap >> UHS2_DEV_CONFIG_N_FCU_POS) &
> +				UHS2_DEV_CONFIG_N_FCU_MASK;
> +	card->uhs2_config.dev_type =
> +				(cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) &
> +				UHS2_DEV_CONFIG_DEV_TYPE_MASK;
> +	card->uhs2_config.maxblk_len =
> +				(cap >> UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) &
> +				UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK;
> +
> +	cap = cmd.resp[1];
> +	card->uhs2_config.n_data_gap =
> +				cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK;
> +	if (card->uhs2_config.n_fcu == 0)
> +		card->uhs2_config.n_fcu = 256;
> +
>  	return 0;
>  }
>  
> @@ -100,26 +470,357 @@ static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
>   */
>  static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card)
>  {
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	u16 header, arg;
> +	__be32 payload[UHS2_CFG_WRITE_PAYLOAD_LEN];
> +	u8 nMinDataGap;
> +	int err;
> +	u8 resp[5] = {0};
> +
> +	/*
> +	 * Use Control Write CCMD to set Generic Setting in Configuration Register.
> +	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> +	 * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> +	 * - Payload = New contents to be written to Generic Setting Register
> +	 */
> +	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> +	arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_WRITE |
> +	       UHS2_NATIVE_CMD_PLEN_8B |
> +	       (UHS2_DEV_CONFIG_GEN_SET >> 8);
> +
> +	/*
> +	 * Most UHS-II cards only support FD and 2L-HD mode. Other lane numbers
> +	 * defined in UHS-II addendem Ver1.01 are optional.
> +	 */
> +	host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> +	card->uhs2_config.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> +
> +	payload[0] = card->uhs2_config.n_lanes_set << UHS2_DEV_CONFIG_N_LANES_POS;
> +	payload[1] = 0;
> +	payload[0] = cpu_to_be32(payload[0]);
> +	payload[1] = cpu_to_be32(payload[1]);
> +
> +	/*
> +	 * There is no payload because per spec, there should be
> +	 * no payload field for read CCMD.
> +	 * Plen is set in arg. Per spec, plen for read CCMD
> +	 * represents the len of read data which is assigned in payload
> +	 * of following RES (p136).
> +	 */
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> +			     NULL, 0);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/*
> +	 * Use Control Write CCMD to set PHY Setting in Configuration Register.
> +	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> +	 * - IOADR = PHY Setting Register(CFG_BASE + 00Ah)
> +	 * - Payload = New contents to be written to PHY Setting Register
> +	 */
> +	arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_WRITE |
> +	       UHS2_NATIVE_CMD_PLEN_8B |
> +	       (UHS2_DEV_CONFIG_PHY_SET >> 8);
> +
> +	if (host->uhs2_caps.speed_range == UHS2_DEV_CONFIG_PHY_SET_SPEED_B) {
> +		if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> +		    host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> +			/* Support HD */
> +			host->ios.timing = MMC_TIMING_UHS2_SPEED_B_HD;
> +			nMinDataGap = 1;
> +		} else {
> +			/* Only support 2L-FD so far */
> +			host->ios.timing = MMC_TIMING_UHS2_SPEED_B;
> +			nMinDataGap = 3;
> +		}
> +		card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_B;
> +	} else {
> +		if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> +		    host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> +			/* Support HD */
> +			host->ios.timing = MMC_TIMING_UHS2_SPEED_A_HD;
> +			nMinDataGap = 1;
> +		} else {
> +			/* Only support 2L-FD so far */
> +			host->ios.timing = MMC_TIMING_UHS2_SPEED_A;
> +			nMinDataGap = 3;
> +		}
> +		card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_A;
> +	}
> +
> +	payload[0] = card->uhs2_config.speed_range_set << UHS2_DEV_CONFIG_PHY_SET_SPEED_POS;
> +
> +	card->uhs2_config.n_lss_sync_set = (max(card->uhs2_config.n_lss_sync,
> +						host->uhs2_caps.n_lss_sync) >> 2) &
> +					   UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> +	host->uhs2_caps.n_lss_sync_set = card->uhs2_config.n_lss_sync_set;
> +
> +	card->uhs2_config.n_lss_dir_set = (max(card->uhs2_config.n_lss_dir,
> +					       host->uhs2_caps.n_lss_dir) >> 3) &
> +					  UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> +	host->uhs2_caps.n_lss_dir_set = card->uhs2_config.n_lss_dir_set;
> +
> +	payload[1] = (card->uhs2_config.n_lss_dir_set << UHS2_DEV_CONFIG_N_LSS_DIR_POS) |
> +		     card->uhs2_config.n_lss_sync_set;
> +	payload[0] = cpu_to_be32(payload[0]);
> +	payload[1] = cpu_to_be32(payload[1]);
> +
> +	memset(resp, 0, sizeof(resp));
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> +			     resp, UHS2_CFG_WRITE_PHY_SET_RESP_LEN);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	if ((resp[2] & 0x80)) {
> +		pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n",
> +		       mmc_hostname(host), __func__, resp[2]);
> +		return -EIO;
> +	}
> +
> +	/*
> +	 * Use Control Write CCMD to set LINK/TRAN Setting in Configuration Register.
> +	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> +	 * - IOADR = LINK/TRAN Setting Register(CFG_BASE + 00Ch)
> +	 * - Payload = New contents to be written to LINK/TRAN Setting Register
> +	 */
> +	arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) |
> +		UHS2_NATIVE_CMD_WRITE |
> +		UHS2_NATIVE_CMD_PLEN_8B |
> +		(UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8);
> +
> +	if (card->uhs2_config.app_type == UHS2_DEV_CONFIG_APP_SD_MEM)
> +		card->uhs2_config.maxblk_len_set = UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN;
> +	else
> +		card->uhs2_config.maxblk_len_set = min(card->uhs2_config.maxblk_len,
> +						       host->uhs2_caps.maxblk_len);
> +	host->uhs2_caps.maxblk_len_set = card->uhs2_config.maxblk_len_set;
> +
> +	card->uhs2_config.n_fcu_set = min(card->uhs2_config.n_fcu, host->uhs2_caps.n_fcu);
> +	host->uhs2_caps.n_fcu_set = card->uhs2_config.n_fcu_set;
> +
> +	card->uhs2_config.n_data_gap_set = max(nMinDataGap, card->uhs2_config.n_data_gap);
> +	host->uhs2_caps.n_data_gap_set = card->uhs2_config.n_data_gap_set;
> +
> +	host->uhs2_caps.max_retry_set = 3;
> +	card->uhs2_config.max_retry_set = host->uhs2_caps.max_retry_set;
> +
> +	payload[0] = (card->uhs2_config.maxblk_len_set << UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) |
> +		     (card->uhs2_config.max_retry_set << UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) |
> +		     (card->uhs2_config.n_fcu_set << UHS2_DEV_CONFIG_N_FCU_POS);
> +	payload[1] = card->uhs2_config.n_data_gap_set;
> +	payload[0] = cpu_to_be32(payload[0]);
> +	payload[1] = cpu_to_be32(payload[1]);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> +			     NULL, 0);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/*
> +	 * Use Control Write CCMD to set Config Completion(payload bit 63) in Generic Setting
> +	 * Register.
> +	 * Header:
> +	 *      - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> +	 *      - IOADR = PGeneric Setting Register(CFG_BASE + 008h)
> +	 * Payload:
> +	 *      - bit [63]: Config Completion
> +	 *
> +	 * DLSM transits to Active state immediately when Config Completion is set to 1.
> +	 */
> +	arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> +	       UHS2_NATIVE_CMD_WRITE |
> +	       UHS2_NATIVE_CMD_PLEN_8B |
> +	       (UHS2_DEV_CONFIG_GEN_SET >> 8);
> +
> +	payload[0] = 0;
> +	payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE;
> +	payload[0] = cpu_to_be32(payload[0]);
> +	payload[1] = cpu_to_be32(payload[1]);
> +
> +	memset(resp, 0, sizeof(resp));
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> +			     resp, UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/* Set host Config Setting registers */
> +	err = host->ops->uhs2_control(host, UHS2_SET_CONFIG);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sd_uhs2_go_dormant(struct mmc_host *host, u32 node_id)
> +{
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	u16 header, arg;
> +	__be32 payload[1];
> +	int err;
> +
> +	/* Disable Normal INT */
> +	err = host->ops->uhs2_control(host, UHS2_DISABLE_INT);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 DISABLE_INT fail!\n",
> +		       mmc_hostname(host), __func__);
> +		return err;
> +	}
> +
> +	/*
> +	 * Refer to UHS-II Addendum Version 1.02 Figure 6-17 to see GO_DORMANT_STATE CCMD format.
> +	 * Header:
> +	 *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> +	 *      - IOADR = CMD_BASE + 001h
> +	 * Payload:
> +	 *      - bit [7]: HBR(Entry to Hibernate Mode)
> +	 *                 1: Host intends to enter Hibernate mode during Dormant state.
> +	 *                 The default setting is 0 because hibernate is currently not supported.
> +	 */
> +	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> +	arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) |
> +		UHS2_NATIVE_CMD_WRITE |
> +		UHS2_NATIVE_CMD_PLEN_4B |
> +		(UHS2_DEV_CMD_GO_DORMANT_STATE >> 8);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_GO_DORMANT_PAYLOAD_LEN,
> +			     NULL, 0);
> +
> +	err = mmc_wait_for_cmd(host, &cmd, 0);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/* Check Dormant State in Present */
> +	err = host->ops->uhs2_control(host, UHS2_CHECK_DORMANT);
> +	if (err)
> +		return err;
> +
> +	/* Disable UHS2 card clock */
> +	err = host->ops->uhs2_control(host, UHS2_DISABLE_CLK);
> +	if (err)
> +		return err;
> +
> +	/* Restore sd clock */
> +	mmc_delay(5);
> +	err = host->ops->uhs2_control(host, UHS2_ENABLE_CLK);
> +	if (err)
> +		return err;
> +
> +	/* Enable Normal INT */
> +	err = host->ops->uhs2_control(host, UHS2_ENABLE_INT);
> +	if (err)
> +		return err;
> +
> +	/* Detect UHS2 */
> +	err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> +	if (err)
> +		return err;
> +
>  	return 0;
>  }
>  
> -/*
> - * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> - * commands/requests to be backwards compatible through the legacy SD protocol.
> - * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> - * be set through a legacy CMD6. Note that, the power limit that becomes set,
> - * survives a soft reset through the GO_DORMANT_STATE command.
> - */
> -static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> +static int __sd_uhs2_wait_active_state_cb(void *cb_data, bool *busy)
>  {
> +	struct sd_uhs2_wait_active_state_data *data = cb_data;
> +	struct mmc_host *host = data->host;
> +	struct mmc_command *cmd = data->cmd;
> +	int err;
> +
> +	err = mmc_wait_for_cmd(host, cmd, 0);
> +	if (err)
> +		return err;
> +
> +	if (cmd->resp[1] & UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE)
> +		*busy = false;
> +	else
> +		*busy = true;
> +
>  	return 0;
>  }
>  
> +static int sd_uhs2_go_dormant_state(struct mmc_host *host, u32 node_id)
> +{
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	u16 header, arg;
> +	int err;
> +	struct sd_uhs2_wait_active_state_data cb_data = {
> +		.host = host,
> +		.cmd = &cmd
> +	};
> +
> +	err = sd_uhs2_go_dormant(host, node_id);
> +	if (err) {
> +		pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n",
> +		       mmc_hostname(host), __func__, err);
> +		return err;
> +	}
> +
> +	/*
> +	 * Use Control Read CCMD to check Config Completion(bit 63) in Generic Setting Register.
> +	 * - Control Read(R/W=0) with 8-Byte payload(PLEN=10b).
> +	 * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> +	 *
> +	 * When UHS-II card been switched to new speed mode, it will set Config Completion to 1.
> +	 */
> +	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> +	arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> +		UHS2_NATIVE_CMD_READ |
> +		UHS2_NATIVE_CMD_PLEN_8B |
> +		(UHS2_DEV_CONFIG_GEN_SET >> 8);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> +	err = __mmc_poll_for_busy(host, UHS2_WAIT_CFG_COMPLETE_PERIOD_US,
> +				  UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS,
> +				  &__sd_uhs2_wait_active_state_cb, &cb_data);
> +	if (err) {
> +		pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static void sd_uhs2_remove(struct mmc_host *host)
> +{
> +	mmc_remove_card(host->card);
> +	host->card = NULL;
> +}
> +
>  /*
>   * Allocate the data structure for the mmc_card and run the UHS-II specific
>   * initialization sequence.
>   */
> -static int sd_uhs2_init_card(struct mmc_host *host)
> +static int sd_uhs2_init_card(struct mmc_host *host, struct mmc_card *oldcard)
>  {
>  	struct mmc_card *card;
>  	u32 node_id;
> @@ -133,9 +834,14 @@ static int sd_uhs2_init_card(struct mmc_host *host)
>  	if (err)
>  		return err;
>  
> -	card = mmc_alloc_card(host, &sd_type);
> -	if (IS_ERR(card))
> -		return PTR_ERR(card);
> +	if (oldcard) {
> +		card = oldcard;
> +	} else {
> +		card = mmc_alloc_card(host, &sd_type);
> +		if (IS_ERR(card))
> +			return PTR_ERR(card);
> +	}
> +	host->card = card;
>  
>  	card->uhs2_config.node_id = node_id;
>  	card->type = MMC_TYPE_SD;
> @@ -148,18 +854,226 @@ static int sd_uhs2_init_card(struct mmc_host *host)
>  	if (err)
>  		goto err;
>  
> -	host->card = card;
> +	/* If change speed to Range B, need to GO_DORMANT_STATE */
> +	if (host->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> +	    host->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) {
> +		err = sd_uhs2_go_dormant_state(host, node_id);
> +		if (err)
> +			return err;
> +	}
> +
> +	host->flags |= MMC_UHS2_SD_TRAN;
> +
>  	return 0;
>  
>  err:
> -	mmc_remove_card(card);
> +	sd_uhs2_remove(host);
>  	return err;
>  }
>  
> -static void sd_uhs2_remove(struct mmc_host *host)
> +int sd_uhs2_reinit(struct mmc_host *host)
>  {
> -	mmc_remove_card(host->card);
> -	host->card = NULL;
> +	struct mmc_card *card = host->card;
> +	int err;
> +
> +	sd_uhs2_power_up(host);
> +	err = sd_uhs2_phy_init(host);
> +	if (err)
> +		return err;
> +
> +	err = sd_uhs2_init_card(host, card);
> +	if (err)
> +		return err;
> +
> +	mmc_card_set_present(card);
> +	return err;
> +}
> +
> +/*
> + * Mask off any voltages we don't support and select
> + * the lowest voltage
> + */
> +u32 sd_uhs2_select_voltage(struct mmc_host *host, u32 ocr)
> +{
> +	int bit;
> +	int err;
> +
> +	/*
> +	 * Sanity check the voltages that the card claims to
> +	 * support.
> +	 */
> +	if (ocr & 0x7F) {
> +		dev_warn(mmc_dev(host), "card claims to support voltages below defined range\n");
> +		ocr &= ~0x7F;
> +	}
> +
> +	ocr &= host->ocr_avail;
> +	if (!ocr) {
> +		dev_warn(mmc_dev(host), "no support for card's volts\n");
> +		return 0;
> +	}
> +
> +	if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
> +		bit = ffs(ocr) - 1;
> +		ocr &= 3 << bit;
> +		/* Power cycle */
> +		err = sd_uhs2_power_off(host);
> +		if (err)
> +			return 0;
> +		err = sd_uhs2_reinit(host);
> +		if (err)
> +			return 0;
> +	} else {
> +		bit = fls(ocr) - 1;
> +		ocr &= 3 << bit;
> +		if (bit != host->ios.vdd)
> +			dev_warn(mmc_dev(host), "exceeding card's volts\n");
> +	}
> +
> +	return ocr;
> +}
> +
> +/*
> + * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> + * commands/requests to be backwards compatible through the legacy SD protocol.
> + * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> + * be set through a legacy CMD6. Note that, the power limit that becomes set,
> + * survives a soft reset through the GO_DORMANT_STATE command.
> + */
> +static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> +{
> +	int err;
> +	u32 cid[4];
> +	u32 ocr;
> +	u32 rocr;
> +	u8  *status;
> +	int ro;
> +
> +	/* Send CMD0 to reset SD card */
> +	err = __mmc_go_idle(host);
> +	if (err)
> +		return err;
> +
> +	mmc_delay(1);
> +
> +	/* Send CMD8 to communicate SD interface operation condition */
> +	err = mmc_send_if_cond(host, host->ocr_avail);
> +	if (err) {
> +		dev_warn(mmc_dev(host), "CMD8 error\n");
> +		goto err;
> +	}
> +
> +	/*
> +	 * Probe SD card working voltage.
> +	 */
> +	err = mmc_send_app_op_cond(host, 0, &ocr);
> +	if (err)
> +		goto err;
> +
> +	card->ocr = ocr;
> +
> +	/*
> +	 * Some SD cards claims an out of spec VDD voltage range. Let's treat
> +	 * these bits as being in-valid and especially also bit7.
> +	 */
> +	ocr &= ~0x7FFF;
> +	rocr = sd_uhs2_select_voltage(host, ocr);
> +	/*
> +	 * Some cards have zero value of rocr in UHS-II mode. Assign host's
> +	 * ocr value to rocr.
> +	 */
> +	if (!rocr)
> +		rocr = host->ocr_avail;
> +
> +	rocr |= (SD_OCR_CCS | SD_OCR_XPC);
> +
> +	/* Wait SD power on ready */
> +	ocr = rocr;
> +
> +	err = mmc_send_app_op_cond(host, ocr, &rocr);
> +	if (err)
> +		goto err;
> +
> +	err = mmc_send_cid(host, cid);
> +	if (err)
> +		goto err;
> +
> +	memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
> +	mmc_decode_cid(card);
> +
> +	/*
> +	 * For native busses:  get card RCA and quit open drain mode.
> +	 */
> +	err = mmc_send_relative_addr(host, &card->rca);
> +	if (err)
> +		goto err;
> +
> +	err = mmc_sd_get_csd(card);
> +	if (err)
> +		goto err;
> +
> +	/*
> +	 * Select card, as all following commands rely on that.
> +	 */
> +	err = mmc_select_card(card);
> +	if (err)
> +		goto err;
> +
> +	/*
> +	 * Fetch SCR from card.
> +	 */
> +	err = mmc_app_send_scr(card);
> +	if (err)
> +		goto err;
> +
> +	err = mmc_decode_scr(card);
> +	if (err)
> +		goto err;
> +
> +	/*
> +	 * Switch to high power consumption mode.
> +	 * Even switch failed, sd card can still work at lower power consumption mode, but
> +	 * performance will be lower than high power consumption mode.
> +	 */
> +	status = kmalloc(64, GFP_KERNEL);
> +	if (!status)
> +		return -ENOMEM;
> +
> +	if (!(card->csd.cmdclass & CCC_SWITCH)) {
> +		pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
> +			mmc_hostname(card->host));
> +	} else {
> +		/* send CMD6 to set Maximum Power Consumption to get better performance */
> +		err = mmc_sd_switch(card, 0, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> +		if (!err)
> +			err = mmc_sd_switch(card, 1, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> +
> +		err = 0;
> +	}
> +
> +	/*
> +	 * Check if read-only switch is active.
> +	 */
> +	ro = mmc_sd_get_ro(host);
> +	if (ro < 0) {
> +		pr_warn("%s: host does not support read-only switch, assuming write-enable\n",
> +			mmc_hostname(host));
> +	} else if (ro > 0) {
> +		mmc_card_set_readonly(card);
> +	}
> +
> +	/*
> +	 * NOTE:
> +	 * Should we read Externsion Register to check power notification feature here?
> +	 */
> +
> +	kfree(status);
> +
> +	return 0;
> +
> +err:
> +	sd_uhs2_remove(host);
> +	return err;
>  }
>  
>  static int sd_uhs2_alive(struct mmc_host *host)
> @@ -181,38 +1095,181 @@ static void sd_uhs2_detect(struct mmc_host *host)
>  		mmc_claim_host(host);
>  		mmc_detach_bus(host);
>  		sd_uhs2_power_off(host);
> +		host->flags &= ~MMC_UHS2_SUPPORT;
>  		mmc_release_host(host);
>  	}
>  }
>  
> +static int _sd_uhs2_suspend(struct mmc_host *host)
> +{
> +	struct mmc_card *card = host->card;
> +	int err = 0;
> +
> +	mmc_claim_host(host);
> +
> +	if (mmc_card_suspended(card))
> +		goto out;
> +
> +	if (mmc_sd_can_poweroff_notify(card))
> +		err = sd_poweroff_notify(card);
> +
> +	if (!err) {
> +		sd_uhs2_power_off(host);
> +		mmc_card_set_suspended(card);
> +	}
> +
> +out:
> +	mmc_release_host(host);
> +	return err;
> +}
> +
> +/*
> + * Callback for suspend
> + */
>  static int sd_uhs2_suspend(struct mmc_host *host)
>  {
> -	return 0;
> +	int err;
> +
> +	err = _sd_uhs2_suspend(host);
> +	if (!err) {
> +		pm_runtime_disable(&host->card->dev);
> +		pm_runtime_set_suspended(&host->card->dev);
> +	}
> +
> +	return err;
>  }
>  
> +/*
> + * This function tries to determine if the same card is still present
> + * and, if so, restore all state to it.
> + */
> +static int _mmc_sd_uhs2_resume(struct mmc_host *host)
> +{
> +	int err = 0;
> +
> +	mmc_claim_host(host);
> +
> +	if (!mmc_card_suspended(host->card))
> +		goto out;
> +
> +	/* Power up UHS2 SD card and re-initialize it. */
> +	err = sd_uhs2_reinit(host);
> +	mmc_card_clr_suspended(host->card);
> +
> +out:
> +	mmc_release_host(host);
> +	return err;
> +}
> +
> +/*
> + * Callback for resume
> + */
>  static int sd_uhs2_resume(struct mmc_host *host)
>  {
> +	pm_runtime_enable(&host->card->dev);
>  	return 0;
>  }
>  
> +/*
> + * Callback for runtime_suspend.
> + */
>  static int sd_uhs2_runtime_suspend(struct mmc_host *host)
>  {
> -	return 0;
> +	int err;
> +
> +	if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
> +		return 0;
> +
> +	err = _sd_uhs2_suspend(host);
> +	if (err)
> +		pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err);
> +
> +	return err;
>  }
>  
>  static int sd_uhs2_runtime_resume(struct mmc_host *host)
>  {
> -	return 0;
> +	int err;
> +
> +	err = _mmc_sd_uhs2_resume(host);
> +	if (err && err != -ENOMEDIUM)
> +		pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err);
> +
> +	return err;
>  }
>  
> -static int sd_uhs2_shutdown(struct mmc_host *host)
> +static int sd_uhs2_hw_reset(struct mmc_host *host)
>  {
> -	return 0;
> +	int err;
> +
> +	sd_uhs2_power_off(host);
> +	/* Wait at least 1 ms according to SD spec */
> +	mmc_delay(1);
> +	sd_uhs2_power_up(host);
> +
> +	err = sd_uhs2_reinit(host);
> +
> +	return err;
>  }
>  
> -static int sd_uhs2_hw_reset(struct mmc_host *host)
> +/*
> + * mmc_uhs2_prepare_cmd - prepare for SD command packet
> + * @host:	MMC host
> + * @mrq:	MMC request
> + *
> + * Initialize and fill in a header and a payload of SD command packet.
> + * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
> + * advance.
> + *
> + * Return:	0 on success, non-zero error on failure
> + */
> +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
>  {
> -	return 0;
> +	struct mmc_command *cmd;
> +	struct uhs2_command *uhs2_cmd;
> +	u16 header, arg;
> +	__be32 *payload;
> +	u8 plen;
> +
> +	cmd = mrq->cmd;
> +	header = host->card->uhs2_config.node_id;
> +	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> +		header |= UHS2_PACKET_TYPE_DCMD;
> +	else
> +		header |= UHS2_PACKET_TYPE_CCMD;
> +
> +	arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
> +	if (host->uhs2_app_cmd) {
> +		arg |= UHS2_SD_CMD_APP;
> +		host->uhs2_app_cmd = false;
> +	}
> +
> +	uhs2_cmd = cmd->uhs2_cmd;
> +	payload = uhs2_cmd->payload;
> +	plen = 2; /* at the maximum */
> +
> +	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
> +	    !cmd->uhs2_tmode0_flag) {
> +		if (mmc_card_uhs2_hd_mode(host))
> +			arg |= UHS2_DCMD_2L_HD_MODE;
> +
> +		arg |= UHS2_DCMD_LM_TLEN_EXIST;
> +
> +		if (cmd->data->blocks == 1 &&
> +		    cmd->data->blksz != 512 &&
> +		    cmd->opcode != MMC_READ_SINGLE_BLOCK &&
> +		    cmd->opcode != MMC_WRITE_BLOCK) {
> +			arg |= UHS2_DCMD_TLUM_BYTE_MODE;
> +			payload[1] = cpu_to_be32(cmd->data->blksz);
> +		} else {
> +			payload[1] = cpu_to_be32(cmd->data->blocks);
> +		}
> +	} else {
> +		plen = 1;
> +	}
> +
> +	payload[0] = cpu_to_be32(cmd->arg);
> +	sd_uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
>  }
>  
>  static const struct mmc_bus_ops sd_uhs2_ops = {
> @@ -223,7 +1280,7 @@ static const struct mmc_bus_ops sd_uhs2_ops = {
>  	.resume = sd_uhs2_resume,
>  	.runtime_suspend = sd_uhs2_runtime_suspend,
>  	.runtime_resume = sd_uhs2_runtime_resume,
> -	.shutdown = sd_uhs2_shutdown,
> +	.shutdown = sd_uhs2_suspend,
>  	.hw_reset = sd_uhs2_hw_reset,
>  };
>  
> @@ -231,6 +1288,8 @@ static int sd_uhs2_attach(struct mmc_host *host)
>  {
>  	int err;
>  
> +	host->flags |= MMC_UHS2_SUPPORT;
> +
>  	err = sd_uhs2_power_up(host);
>  	if (err)
>  		goto err;
> @@ -239,7 +1298,7 @@ static int sd_uhs2_attach(struct mmc_host *host)
>  	if (err)
>  		goto err;
>  
> -	err = sd_uhs2_init_card(host);
> +	err = sd_uhs2_init_card(host, NULL);
>  	if (err)
>  		goto err;
>  
> @@ -256,21 +1315,32 @@ static int sd_uhs2_attach(struct mmc_host *host)
>  		goto remove_card;
>  
>  	mmc_claim_host(host);
> +
>  	return 0;
>  
>  remove_card:
> -	mmc_remove_card(host->card);
> -	host->card = NULL;
> +	sd_uhs2_remove(host);
>  	mmc_claim_host(host);
> -	mmc_detach_bus(host);
> +
>  err:
> +	mmc_detach_bus(host);
>  	sd_uhs2_power_off(host);
> +	host->flags &= ~MMC_UHS2_SUPPORT;
>  	return err;
>  }
>  
> +/**
> + * mmc_attach_sd_uhs2 - select UHS2 interface
> + * @host: MMC host
> + *
> + * Try to select UHS2 interface and initialize the bus for a given
> + * frequency, @freq.
> + *
> + * Return:	0 on success, non-zero error on failure
> + */
>  int mmc_attach_sd_uhs2(struct mmc_host *host)
>  {
> -	int i, err = 0;
> +	int i, err;
>  
>  	if (!(host->caps2 & MMC_CAP2_SD_UHS2))
>  		return -EOPNOTSUPP;
> @@ -285,6 +1355,9 @@ int mmc_attach_sd_uhs2(struct mmc_host *host)
>  	 */
>  	for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) {
>  		host->f_init = sd_uhs2_freqs[i];
> +		pr_info("%s: %s: trying to init UHS-II card at %u Hz\n",
> +			mmc_hostname(host), __func__, host->f_init);
> +
>  		err = sd_uhs2_attach(host);
>  		if (!err)
>  			break;
Victor Shih Aug. 4, 2023, 10:10 a.m. UTC | #2
On Mon, Jul 31, 2023 at 11:29 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 21/07/23 13:13, Victor Shih wrote:
> > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> >
> > Embed UHS-II access/control functionality into the MMC request
> > processing flow.
> >
> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > ---
> >
> > Updates in V8:
> >  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> >  - Modify return value in sd_uhs2_attach().
> >
> > Updates in V7:
> >  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> >  - Drop uhs2_state in favor of ios->timing.
> >  - Remove unnecessary functions.
> >
> > ---
> >
> >  drivers/mmc/core/block.c   |   18 +-
> >  drivers/mmc/core/core.c    |    8 +
> >  drivers/mmc/core/mmc_ops.c |   25 +-
> >  drivers/mmc/core/mmc_ops.h |    1 +
> >  drivers/mmc/core/sd.c      |   13 +-
> >  drivers/mmc/core/sd.h      |    4 +
> >  drivers/mmc/core/sd_ops.c  |   11 +
> >  drivers/mmc/core/sd_ops.h  |   18 +
> >  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
> >  9 files changed, 1176 insertions(+), 59 deletions(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index f701efb1fa78..6617ae9fc840 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
> >
> >       struct scatterlist sg;
> >
> > -     cmd.opcode = MMC_APP_CMD;
> > -     cmd.arg = card->rca << 16;
> > -     cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> > -
> > -     err = mmc_wait_for_cmd(card->host, &cmd, 0);
> > -     if (err)
> > -             return err;
> > -     if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> > -             return -EIO;
> > +     err = mmc_app_cmd(card->host, card);
> > +             if (err)
> > +                     return err;
> >
> >       memset(&cmd, 0, sizeof(struct mmc_command));
> >
> > @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >       struct request *req = mmc_queue_req_to_req(mqrq);
> >       struct mmc_blk_data *md = mq->blkdata;
> >       bool do_rel_wr, do_data_tag;
> > +     bool do_multi;
> > +
> > +     do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
> >
> >       mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
> >
> > @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >               brq->cmd.arg <<= 9;
> >       brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> >
> > -     if (brq->data.blocks > 1 || do_rel_wr) {
> > +     if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
> >               /* SPI multiblock writes terminate using a special
> >                * token, not a STOP_TRANSMISSION request.
> >                */
> > @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >               brq->mrq.stop = NULL;
> >               readcmd = MMC_READ_SINGLE_BLOCK;
> >               writecmd = MMC_WRITE_BLOCK;
> > +             brq->cmd.uhs2_tmode0_flag = 1;
> >       }
> >       brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
> >
> > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> > index ba8808cd9318..f5dc653eafb0 100644
> > --- a/drivers/mmc/core/core.c
> > +++ b/drivers/mmc/core/core.c
> > @@ -334,6 +334,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
> >
> >  int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> >  {
> > +     struct uhs2_command uhs2_cmd;
> > +     __be32 payload[4]; /* for maximum size */
> >       int err;
> >
> >       init_completion(&mrq->cmd_completion);
> > @@ -351,6 +353,8 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> >       if (err)
> >               return err;
> >
> > +     mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> > +
> >       led_trigger_event(host->led, LED_FULL);
> >       __mmc_start_request(host, mrq);
>
> Same comment as for V8:
>
> Refer:
> https://lore.kernel.org/linux-mmc/047c746f-0787-37ec-7989-cd932f288564@intel.com/
>
>
> __mmc_start_request() is also called by mmc_wait_for_req_done()
> but uhs2_cmd is local to mmc_start_request(), so if mmc_wait_for_req_done()
> is ever called in UHS2 case with cmd->retries, it looks like
> host controller might try to access uhs2_cmd which is no
> longer valid?
>
> There is perhaps mmc_send_status() used in block.c ?
>
> Need to get Ulf's view, but putting "struct uhs2_command uhs2_cmd"
> and "__be32 payload[4]" in struct mmc_command or struct mmc_request
> would seem to be options.  If size is a concern, some optimization
> to reduce the size of struct uhs2_command looks possible, and is
> max payload len actually only 2 at the moment.
>

Hi, Ulf

      Could I get your opinion on this matter?
      Or maybe we could try the Adrian’s opinion first?

Thanks, Victor Shih

> >
> > @@ -430,6 +434,8 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
> >   */
> >  int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> >  {
> > +     struct uhs2_command uhs2_cmd;
> > +     __be32 payload[4]; /* for maximum size */
> >       int err;
> >
> >       /*
> > @@ -450,6 +456,8 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> >       if (err)
> >               goto out_err;
> >
> > +     mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> > +
> >       err = host->cqe_ops->cqe_request(host, mrq);
> >       if (err)
> >               goto out_err;
> > diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> > index 3b3adbddf664..8ae205a07f9b 100644
> > --- a/drivers/mmc/core/mmc_ops.c
> > +++ b/drivers/mmc/core/mmc_ops.c
> > @@ -144,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host)
> >       return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
> >  }
> >
> > +int __mmc_go_idle(struct mmc_host *host)
> > +{
> > +     struct mmc_command cmd = {};
> > +     int err;
> > +
> > +     cmd.opcode = MMC_GO_IDLE_STATE;
> > +     cmd.arg = 0;
> > +     cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     mmc_delay(1);
> > +
> > +     return err;
> > +}
> > +
> >  int mmc_go_idle(struct mmc_host *host)
> >  {
> >       int err;
> > -     struct mmc_command cmd = {};
> >
> >       /*
> >        * Non-SPI hosts need to prevent chipselect going active during
> > @@ -163,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host)
> >               mmc_delay(1);
> >       }
> >
> > -     cmd.opcode = MMC_GO_IDLE_STATE;
> > -     cmd.arg = 0;
> > -     cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> > -
> > -     err = mmc_wait_for_cmd(host, &cmd, 0);
> > -
> > -     mmc_delay(1);
> > +     err = __mmc_go_idle(host);
> >
> >       if (!mmc_host_is_spi(host)) {
> >               mmc_set_chip_select(host, MMC_CS_DONTCARE);
> > @@ -300,6 +308,7 @@ int mmc_send_adtc_data(struct mmc_card *card, struct mmc_host *host, u32 opcode,
> >        * not R1 plus a data block.
> >        */
> >       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +     cmd.uhs2_tmode0_flag = 1;
> >
> >       data.blksz = len;
> >       data.blocks = 1;
> > diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> > index 09ffbc00908b..abda7492d578 100644
> > --- a/drivers/mmc/core/mmc_ops.h
> > +++ b/drivers/mmc/core/mmc_ops.h
> > @@ -25,6 +25,7 @@ struct mmc_command;
> >  int mmc_select_card(struct mmc_card *card);
> >  int mmc_deselect_cards(struct mmc_host *host);
> >  int mmc_set_dsr(struct mmc_host *host);
> > +int __mmc_go_idle(struct mmc_host *host);
> >  int mmc_go_idle(struct mmc_host *host);
> >  int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
> >  int mmc_set_relative_addr(struct mmc_card *card);
> > diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> > index 246ce027ae0a..15e465f0cc3f 100644
> > --- a/drivers/mmc/core/sd.c
> > +++ b/drivers/mmc/core/sd.c
> > @@ -207,7 +207,7 @@ static int mmc_decode_csd(struct mmc_card *card)
> >  /*
> >   * Given a 64-bit response, decode to our card SCR structure.
> >   */
> > -static int mmc_decode_scr(struct mmc_card *card)
> > +int mmc_decode_scr(struct mmc_card *card)
> >  {
> >       struct sd_scr *scr = &card->scr;
> >       unsigned int scr_struct;
> > @@ -904,7 +904,7 @@ int mmc_sd_get_csd(struct mmc_card *card)
> >       return 0;
> >  }
> >
> > -static int mmc_sd_get_ro(struct mmc_host *host)
> > +int mmc_sd_get_ro(struct mmc_host *host)
> >  {
> >       int ro;
> >
> > @@ -1616,11 +1616,6 @@ static void mmc_sd_detect(struct mmc_host *host)
> >       }
> >  }
> >
> > -static int sd_can_poweroff_notify(struct mmc_card *card)
> > -{
> > -     return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> > -}
> > -
> >  static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
> >  {
> >       struct sd_busy_data *data = cb_data;
> > @@ -1644,7 +1639,7 @@ static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
> >       return 0;
> >  }
> >
> > -static int sd_poweroff_notify(struct mmc_card *card)
> > +int sd_poweroff_notify(struct mmc_card *card)
> >  {
> >       struct sd_busy_data cb_data;
> >       u8 *reg_buf;
> > @@ -1692,7 +1687,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
> >       if (mmc_card_suspended(card))
> >               goto out;
> >
> > -     if (sd_can_poweroff_notify(card))
> > +     if (mmc_sd_can_poweroff_notify(card))
> >               err = sd_poweroff_notify(card);
> >       else if (!mmc_host_is_spi(host))
> >               err = mmc_deselect_cards(host);
> > diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
> > index 1af5a038bae9..d31259919ee5 100644
> > --- a/drivers/mmc/core/sd.h
> > +++ b/drivers/mmc/core/sd.h
> > @@ -11,10 +11,14 @@ struct mmc_card;
> >
> >  int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
> >  int mmc_sd_get_csd(struct mmc_card *card);
> > +int mmc_sd_get_ro(struct mmc_host *host);
> >  void mmc_decode_cid(struct mmc_card *card);
> >  int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
> >       bool reinit);
> >  unsigned mmc_sd_get_max_clock(struct mmc_card *card);
> >  int mmc_sd_switch_hs(struct mmc_card *card);
> >
> > +/* These call back functions were also used by UHS2 sd card */
> > +int sd_poweroff_notify(struct mmc_card *card);
> > +
> >  #endif
> > diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
> > index ef8d1dce5af1..1f9580491ad0 100644
> > --- a/drivers/mmc/core/sd_ops.c
> > +++ b/drivers/mmc/core/sd_ops.c
> > @@ -27,6 +27,15 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
> >       if (WARN_ON(card && card->host != host))
> >               return -EINVAL;
> >
> > +     /*
> > +      * UHS2 packet has APP bit so only set APP_CMD flag here.
> > +      * Will set the APP bit when assembling UHS2 packet.
> > +      */
> > +     if (host->flags & MMC_UHS2_SD_TRAN) {
> > +             host->uhs2_app_cmd = true;
> > +             return 0;
> > +     }
> > +
> >       cmd.opcode = MMC_APP_CMD;
> >
> >       if (card) {
> > @@ -281,6 +290,7 @@ int mmc_app_send_scr(struct mmc_card *card)
> >       cmd.opcode = SD_APP_SEND_SCR;
> >       cmd.arg = 0;
> >       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +     cmd.uhs2_tmode0_flag = 1;
> >
> >       data.blksz = 8;
> >       data.blocks = 1;
> > @@ -344,6 +354,7 @@ int mmc_app_sd_status(struct mmc_card *card, void *ssr)
> >       cmd.opcode = SD_APP_SD_STATUS;
> >       cmd.arg = 0;
> >       cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +     cmd.uhs2_tmode0_flag = 1;
> >
> >       data.blksz = 64;
> >       data.blocks = 1;
> > diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
> > index 3ba7b3cf4652..8c2da57ca2c2 100644
> > --- a/drivers/mmc/core/sd_ops.h
> > +++ b/drivers/mmc/core/sd_ops.h
> > @@ -11,6 +11,7 @@
> >  #include <linux/types.h>
> >
> >  struct mmc_card;
> > +struct mmc_command;
> >  struct mmc_host;
> >
> >  int mmc_app_set_bus_width(struct mmc_card *card, int width);
> > @@ -19,10 +20,27 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
> >  int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr);
> >  int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
> >  int mmc_app_send_scr(struct mmc_card *card);
> > +int mmc_decode_scr(struct mmc_card *card);
> >  int mmc_sd_switch(struct mmc_card *card, int mode, int group,
> >       u8 value, u8 *resp);
> >  int mmc_app_sd_status(struct mmc_card *card, void *ssr);
> >  int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
> > +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
> > +
> > +static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq,
> > +                                          struct uhs2_command uhs2_cmd, __be32 payload[4])
> > +{
> > +     if (host->flags & MMC_UHS2_SD_TRAN) {
> > +             uhs2_cmd.payload = payload;
> > +             mrq->cmd->uhs2_cmd = &uhs2_cmd;
> > +             mmc_uhs2_prepare_cmd(host, mrq);
> > +     }
> > +}
> > +
> > +static inline int mmc_sd_can_poweroff_notify(struct mmc_card *card)
> > +{
> > +     return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> > +}
> >
> >  #endif
> >
> > diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
> > index 06b2aab52b93..0a1b00b59499 100644
> > --- a/drivers/mmc/core/sd_uhs2.c
> > +++ b/drivers/mmc/core/sd_uhs2.c
> > @@ -1,23 +1,51 @@
> >  // SPDX-License-Identifier: GPL-2.0-only
> >  /*
> >   * Copyright (C) 2021 Linaro Ltd
> > - *
> >   * Author: Ulf Hansson <ulf.hansson@linaro.org>
> >   *
> > + * Copyright (C) 2014 Intel Corp, All Rights Reserved.
> > + * Author: Yi Sun <yi.y.sun@intel.com>
> > + *
> > + * Copyright (C) 2020 Genesys Logic, Inc.
> > + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > + *
> > + * Copyright (C) 2020 Linaro Limited
> > + * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > + *
> > + * Copyright (C) 2022 Genesys Logic, Inc.
> > + * Authors: Jason Lai <jason.lai@genesyslogic.com.tw>
> > + *
> > + * Copyright (C) 2023 Genesys Logic, Inc.
> > + * Authors: Victor Shih <victor.shih@genesyslogic.com.tw>
> > + *
> >   * Support for SD UHS-II cards
> >   */
> >  #include <linux/err.h>
> > +#include <linux/pm_runtime.h>
> >
> >  #include <linux/mmc/host.h>
> >  #include <linux/mmc/card.h>
> > +#include <linux/mmc/mmc.h>
> > +#include <linux/mmc/sd.h>
> > +#include <linux/mmc/sd_uhs2.h>
> >
> > +#include "card.h"
> >  #include "core.h"
> >  #include "bus.h"
> >  #include "sd.h"
> > +#include "sd_ops.h"
> >  #include "mmc_ops.h"
> >
> > +#define UHS2_WAIT_CFG_COMPLETE_PERIOD_US  (1 * 1000) /* 1ms */
> > +#define UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS 100        /* 100ms */
> > +
> >  static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 };
> >
> > +struct sd_uhs2_wait_active_state_data {
> > +     struct mmc_host *host;
> > +     struct mmc_command *cmd;
> > +};
> > +
> >  static int sd_uhs2_power_up(struct mmc_host *host)
> >  {
> >       int err;
> > @@ -50,6 +78,43 @@ static int sd_uhs2_power_off(struct mmc_host *host)
> >       return host->ops->uhs2_control(host, UHS2_SET_IOS);
> >  }
> >
> > +/*
> > + * sd_uhs2_cmd_assemble() - build up UHS-II command packet which is embedded in
> > + *                          mmc_command structure
> > + * @cmd:     MMC command to executed
> > + * @uhs2_cmd:        UHS2 command corresponded to MMC command
> > + * @header:  Header field of UHS-II command cxpacket
> > + * @arg:     Argument field of UHS-II command packet
> > + * @payload: Payload field of UHS-II command packet
> > + * @plen:    Payload length
> > + * @resp:    Response buffer is allocated by caller and it is used to keep
> > + *              the response of CM-TRAN command. For SD-TRAN command, uhs2_resp
> > + *              should be null and SD-TRAN command response should be stored in
> > + *              resp of mmc_command.
> > + * @resp_len:        Response buffer length
> > + *
> > + * The uhs2_command structure contains message packets which are transmited/
> > + * received on UHS-II bus. This function fills in the contents of uhs2_command
> > + * structure and embededs UHS2 command into mmc_command structure, which is used
> > + * in legacy SD operation functions.
> > + *
> > + */
> > +static void sd_uhs2_cmd_assemble(struct mmc_command *cmd,
> > +                              struct uhs2_command *uhs2_cmd,
> > +                              u16 header, u16 arg, __be32 *payload,
> > +                              u8 plen, u8 *resp, u8 resp_len)
> > +{
> > +     uhs2_cmd->header = header;
> > +     uhs2_cmd->arg = arg;
> > +     uhs2_cmd->payload = payload;
> > +     uhs2_cmd->payload_len = plen * sizeof(u32);
> > +     uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4;
> > +
> > +     cmd->uhs2_cmd = uhs2_cmd;
> > +     cmd->uhs2_resp = resp;
> > +     cmd->uhs2_resp_len = resp_len;
> > +}
> > +
> >  /*
> >   * Run the phy initialization sequence, which mainly relies on the UHS-II host
> >   * to check that we reach the expected electrical state, between the host and
> > @@ -57,7 +122,15 @@ static int sd_uhs2_power_off(struct mmc_host *host)
> >   */
> >  static int sd_uhs2_phy_init(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err = 0;
> > +
> > +     err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> > +     if (err) {
> > +             pr_err("%s: failed to initial phy for UHS-II!\n",
> > +                    mmc_hostname(host));
> > +     }
> > +
> > +     return err;
> >  }
> >
> >  /*
> > @@ -66,6 +139,82 @@ static int sd_uhs2_phy_init(struct mmc_host *host)
> >   */
> >  static int sd_uhs2_dev_init(struct mmc_host *host)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u32 cnt;
> > +     u32 dap, gap, resp_gap;
> > +     u16 header, arg;
> > +     __be32 payload[UHS2_DEV_INIT_PAYLOAD_LEN];
> > +     u8 gd = 0;
> > +     u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> > +     int err;
> > +
> > +     dap = host->uhs2_caps.dap;
> > +     gap = host->uhs2_caps.gap;
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 Figure 6-21 to see DEVICE_INIT CCMD format.
> > +      * Head:
> > +      *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      *      - IOADR = CMD_BASE + 002h
> > +      * Payload:
> > +      *      - bit [3:0]  : GAP(Group Allocated Power)
> > +      *      - bit [7:4]  : GD(Group Descriptor)
> > +      *      - bit [11]   : Complete Flag
> > +      *      - bit [15:12]: DAP(Device Allocated Power)
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> > +     arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_4B |
> > +            (UHS2_DEV_CMD_DEVICE_INIT >> 8);
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 section 6.3.1.
> > +      * Max. time from DEVICE_INIT CCMD EOP reception on Device
> > +      * Rx to its SOP transmission on Device Tx(Tfwd_init_cmd) is
> > +      * 1 second.
> > +      */
> > +     cmd.busy_timeout = 1000;
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 section 6.2.6.3.
> > +      * When the number of the DEVICE_INIT commands is reach to
> > +      * 30 tiems, Host shall stop issuing DEVICE_INIT command
> > +      * and regard it as an error.
> > +      */
> > +     for (cnt = 0; cnt < 30; cnt++) {
> > +             payload[0] = ((dap & 0xF) << 12) |
> > +                           UHS2_DEV_INIT_COMPLETE_FLAG |
> > +                           ((gd & 0xF) << 4) |
> > +                           (gap & 0xF);
> > +
> > +             sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg,
> > +                                  payload, UHS2_DEV_INIT_PAYLOAD_LEN,
> > +                                  resp, UHS2_DEV_INIT_RESP_LEN);
> > +
> > +             err = mmc_wait_for_cmd(host, &cmd, 0);
> > +             if (err) {
> > +                     pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                            mmc_hostname(host), __func__, err);
> > +                     return err;
> > +             }
> > +
> > +             if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) {
> > +                     pr_err("%s: DEVICE_INIT response is wrong!\n",
> > +                            mmc_hostname(host));
> > +                     return -EIO;
> > +             }
> > +
> > +             if (resp[5] & 0x8) {
> > +                     host->uhs2_caps.group_desc = gd;
> > +                     return 0;
> > +             }
> > +             resp_gap = resp[4] & 0x0F;
> > +             if (gap == resp_gap)
> > +                     gd++;
> > +     }
> > +
> >       return 0;
> >  }
> >
> > @@ -76,6 +225,52 @@ static int sd_uhs2_dev_init(struct mmc_host *host)
> >   */
> >  static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     __be32 payload[UHS2_DEV_ENUM_PAYLOAD_LEN];
> > +     u8 id_f = 0xF, id_l = 0x0;
> > +     u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> > +     int err;
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 Figure 6-28 to see ENUMERATE CCMD format.
> > +      * Header:
> > +      *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      *      - IOADR = CMD_BASE + 003h
> > +      * Payload:
> > +      *      - bit [3:0]: ID_L(Last Node ID)
> > +      *      - bit [7:4]: ID_F(First Node ID)
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> > +     arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_4B |
> > +            (UHS2_DEV_CMD_ENUMERATE >> 8);
> > +
> > +     payload[0] = (id_f << 4) | id_l;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_DEV_ENUM_PAYLOAD_LEN,
> > +                          resp, UHS2_DEV_ENUM_RESP_LEN);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) {
> > +             pr_err("%s: ENUMERATE response is wrong!\n",
> > +                    mmc_hostname(host));
> > +             return -EIO;
> > +     }
> > +
> > +     id_f = (resp[4] >> 4) & 0xF;
> > +     id_l = resp[4] & 0xF;
> > +     *node_id = id_f;
> > +
> >       return 0;
> >  }
> >
> > @@ -86,6 +281,181 @@ static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
> >   */
> >  static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     u32 cap;
> > +     int err;
> > +
> > +     /*
> > +      * Use Control Read CCMD to read Generic Capability from Configuration Register.
> > +      * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      * - IOADR = Generic Capability Register(CFG_BASE + 000h)
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> > +     arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_READ |
> > +            UHS2_NATIVE_CMD_PLEN_4B |
> > +            (UHS2_DEV_CONFIG_GEN_CAPS >> 8);
> > +
> > +     /*
> > +      * There is no payload because per spec, there should be
> > +      * no payload field for read CCMD.
> > +      * Plen is set in arg. Per spec, plen for read CCMD
> > +      * represents the len of read data which is assigned in payload
> > +      * of following RES (p136).
> > +      */
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Generic Capability Register:
> > +      * bit [7:0]  : Reserved
> > +      * bit [13:8] : Device-Specific Number of Lanes and Functionality
> > +      *              bit 8: 2L-HD
> > +      *              bit 9: 2D-1U FD
> > +      *              bit 10: 1D-2U FD
> > +      *              bit 11: 2D-2U FD
> > +      *              Others: Reserved
> > +      * bit [14]   : DADR Length
> > +      *              0: 4 bytes
> > +      *              1: Reserved
> > +      * bit [23:16]: Application Type
> > +      *              bit 16: 0=Non-SD memory, 1=SD memory
> > +      *              bit 17: 0=Non-SDIO, 1=SDIO
> > +      *              bit 18: 0=Card, 1=Embedded
> > +      * bit [63:24]: Reserved
> > +      */
> > +     cap = cmd.resp[0];
> > +     card->uhs2_config.n_lanes =
> > +                             (cap >> UHS2_DEV_CONFIG_N_LANES_POS) &
> > +                             UHS2_DEV_CONFIG_N_LANES_MASK;
> > +     card->uhs2_config.dadr_len =
> > +                             (cap >> UHS2_DEV_CONFIG_DADR_POS) &
> > +                             UHS2_DEV_CONFIG_DADR_MASK;
> > +     card->uhs2_config.app_type =
> > +                             (cap >> UHS2_DEV_CONFIG_APP_POS) &
> > +                             UHS2_DEV_CONFIG_APP_MASK;
> > +
> > +     /*
> > +      * Use Control Read CCMD to read PHY Capability from Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = PHY Capability Register(CFG_BASE + 002h)
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_READ |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +           (UHS2_DEV_CONFIG_PHY_CAPS >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * PHY Capability Register:
> > +      * bit [3:0]  : PHY Minor Revision
> > +      * bit [5:4]  : PHY Major Revision
> > +      * bit [15]   : Support Hibernate Mode
> > +      *              0: Not support Hibernate Mode
> > +      *              1: Support Hibernate Mode
> > +      * bit [31:16]: Reserved
> > +      * bit [35:32]: Device-Specific N_LSS_SYN
> > +      * bit [39:36]: Device-Specific N_LSS_DIR
> > +      * bit [63:40]: Reserved
> > +      */
> > +     cap = cmd.resp[0];
> > +     card->uhs2_config.phy_minor_rev =
> > +                             cap & UHS2_DEV_CONFIG_PHY_MINOR_MASK;
> > +     card->uhs2_config.phy_major_rev =
> > +                             (cap >> UHS2_DEV_CONFIG_PHY_MAJOR_POS) &
> > +                              UHS2_DEV_CONFIG_PHY_MAJOR_MASK;
> > +     card->uhs2_config.can_hibernate =
> > +                             (cap >> UHS2_DEV_CONFIG_CAN_HIBER_POS) &
> > +                              UHS2_DEV_CONFIG_CAN_HIBER_MASK;
> > +
> > +     cap = cmd.resp[1];
> > +     card->uhs2_config.n_lss_sync =
> > +                             cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> > +     card->uhs2_config.n_lss_dir =
> > +                             (cap >> UHS2_DEV_CONFIG_N_LSS_DIR_POS) &
> > +                             UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> > +     if (card->uhs2_config.n_lss_sync == 0)
> > +             card->uhs2_config.n_lss_sync = 16 << 2;
> > +     else
> > +             card->uhs2_config.n_lss_sync <<= 2;
> > +
> > +     if (card->uhs2_config.n_lss_dir == 0)
> > +             card->uhs2_config.n_lss_dir = 16 << 3;
> > +     else
> > +             card->uhs2_config.n_lss_dir <<= 3;
> > +
> > +     /*
> > +      * Use Control Read CCMD to read LINK/TRAN Capability from Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = LINK/TRAN Capability Register(CFG_BASE + 004h)
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_READ |
> > +             UHS2_NATIVE_CMD_PLEN_8B |
> > +             (UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * LINK/TRAN Capability Register:
> > +      * bit [3:0]  : LINK_TRAN Minor Revision
> > +      * bit [5:4]  : LINK/TRAN Major Revision
> > +      * bit [7:6]  : Reserved
> > +      * bit [15:8] : Device-Specific N_FCU
> > +      * bit [18:16]: Device Type
> > +      *              001b=Host
> > +      *              010b=Device
> > +      *              011b=Reserved for CMD issuable Device
> > +      * bit [19]   : Reserved
> > +      * bit [31:20]: Device-Specific MAX_BLKLEN
> > +      * bit [39:32]: Device-Specific N_DATA_GAP
> > +      * bit [63:40]: Reserved
> > +      */
> > +     cap = cmd.resp[0];
> > +     card->uhs2_config.link_minor_rev =
> > +                             cap & UHS2_DEV_CONFIG_LT_MINOR_MASK;
> > +     card->uhs2_config.link_major_rev =
> > +                             (cap >> UHS2_DEV_CONFIG_LT_MAJOR_POS) &
> > +                             UHS2_DEV_CONFIG_LT_MAJOR_MASK;
> > +     card->uhs2_config.n_fcu =
> > +                             (cap >> UHS2_DEV_CONFIG_N_FCU_POS) &
> > +                             UHS2_DEV_CONFIG_N_FCU_MASK;
> > +     card->uhs2_config.dev_type =
> > +                             (cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) &
> > +                             UHS2_DEV_CONFIG_DEV_TYPE_MASK;
> > +     card->uhs2_config.maxblk_len =
> > +                             (cap >> UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) &
> > +                             UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK;
> > +
> > +     cap = cmd.resp[1];
> > +     card->uhs2_config.n_data_gap =
> > +                             cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK;
> > +     if (card->uhs2_config.n_fcu == 0)
> > +             card->uhs2_config.n_fcu = 256;
> > +
> >       return 0;
> >  }
> >
> > @@ -100,26 +470,357 @@ static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
> >   */
> >  static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     __be32 payload[UHS2_CFG_WRITE_PAYLOAD_LEN];
> > +     u8 nMinDataGap;
> > +     int err;
> > +     u8 resp[5] = {0};
> > +
> > +     /*
> > +      * Use Control Write CCMD to set Generic Setting in Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> > +      * - Payload = New contents to be written to Generic Setting Register
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> > +     arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +            (UHS2_DEV_CONFIG_GEN_SET >> 8);
> > +
> > +     /*
> > +      * Most UHS-II cards only support FD and 2L-HD mode. Other lane numbers
> > +      * defined in UHS-II addendem Ver1.01 are optional.
> > +      */
> > +     host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> > +     card->uhs2_config.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> > +
> > +     payload[0] = card->uhs2_config.n_lanes_set << UHS2_DEV_CONFIG_N_LANES_POS;
> > +     payload[1] = 0;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     /*
> > +      * There is no payload because per spec, there should be
> > +      * no payload field for read CCMD.
> > +      * Plen is set in arg. Per spec, plen for read CCMD
> > +      * represents the len of read data which is assigned in payload
> > +      * of following RES (p136).
> > +      */
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Use Control Write CCMD to set PHY Setting in Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = PHY Setting Register(CFG_BASE + 00Ah)
> > +      * - Payload = New contents to be written to PHY Setting Register
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +            (UHS2_DEV_CONFIG_PHY_SET >> 8);
> > +
> > +     if (host->uhs2_caps.speed_range == UHS2_DEV_CONFIG_PHY_SET_SPEED_B) {
> > +             if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> > +                 host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> > +                     /* Support HD */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_B_HD;
> > +                     nMinDataGap = 1;
> > +             } else {
> > +                     /* Only support 2L-FD so far */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_B;
> > +                     nMinDataGap = 3;
> > +             }
> > +             card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_B;
> > +     } else {
> > +             if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> > +                 host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> > +                     /* Support HD */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_A_HD;
> > +                     nMinDataGap = 1;
> > +             } else {
> > +                     /* Only support 2L-FD so far */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_A;
> > +                     nMinDataGap = 3;
> > +             }
> > +             card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_A;
> > +     }
> > +
> > +     payload[0] = card->uhs2_config.speed_range_set << UHS2_DEV_CONFIG_PHY_SET_SPEED_POS;
> > +
> > +     card->uhs2_config.n_lss_sync_set = (max(card->uhs2_config.n_lss_sync,
> > +                                             host->uhs2_caps.n_lss_sync) >> 2) &
> > +                                        UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> > +     host->uhs2_caps.n_lss_sync_set = card->uhs2_config.n_lss_sync_set;
> > +
> > +     card->uhs2_config.n_lss_dir_set = (max(card->uhs2_config.n_lss_dir,
> > +                                            host->uhs2_caps.n_lss_dir) >> 3) &
> > +                                       UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> > +     host->uhs2_caps.n_lss_dir_set = card->uhs2_config.n_lss_dir_set;
> > +
> > +     payload[1] = (card->uhs2_config.n_lss_dir_set << UHS2_DEV_CONFIG_N_LSS_DIR_POS) |
> > +                  card->uhs2_config.n_lss_sync_set;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     memset(resp, 0, sizeof(resp));
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          resp, UHS2_CFG_WRITE_PHY_SET_RESP_LEN);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     if ((resp[2] & 0x80)) {
> > +             pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, resp[2]);
> > +             return -EIO;
> > +     }
> > +
> > +     /*
> > +      * Use Control Write CCMD to set LINK/TRAN Setting in Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = LINK/TRAN Setting Register(CFG_BASE + 00Ch)
> > +      * - Payload = New contents to be written to LINK/TRAN Setting Register
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_WRITE |
> > +             UHS2_NATIVE_CMD_PLEN_8B |
> > +             (UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8);
> > +
> > +     if (card->uhs2_config.app_type == UHS2_DEV_CONFIG_APP_SD_MEM)
> > +             card->uhs2_config.maxblk_len_set = UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN;
> > +     else
> > +             card->uhs2_config.maxblk_len_set = min(card->uhs2_config.maxblk_len,
> > +                                                    host->uhs2_caps.maxblk_len);
> > +     host->uhs2_caps.maxblk_len_set = card->uhs2_config.maxblk_len_set;
> > +
> > +     card->uhs2_config.n_fcu_set = min(card->uhs2_config.n_fcu, host->uhs2_caps.n_fcu);
> > +     host->uhs2_caps.n_fcu_set = card->uhs2_config.n_fcu_set;
> > +
> > +     card->uhs2_config.n_data_gap_set = max(nMinDataGap, card->uhs2_config.n_data_gap);
> > +     host->uhs2_caps.n_data_gap_set = card->uhs2_config.n_data_gap_set;
> > +
> > +     host->uhs2_caps.max_retry_set = 3;
> > +     card->uhs2_config.max_retry_set = host->uhs2_caps.max_retry_set;
> > +
> > +     payload[0] = (card->uhs2_config.maxblk_len_set << UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) |
> > +                  (card->uhs2_config.max_retry_set << UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) |
> > +                  (card->uhs2_config.n_fcu_set << UHS2_DEV_CONFIG_N_FCU_POS);
> > +     payload[1] = card->uhs2_config.n_data_gap_set;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Use Control Write CCMD to set Config Completion(payload bit 63) in Generic Setting
> > +      * Register.
> > +      * Header:
> > +      *      - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      *      - IOADR = PGeneric Setting Register(CFG_BASE + 008h)
> > +      * Payload:
> > +      *      - bit [63]: Config Completion
> > +      *
> > +      * DLSM transits to Active state immediately when Config Completion is set to 1.
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +            (UHS2_DEV_CONFIG_GEN_SET >> 8);
> > +
> > +     payload[0] = 0;
> > +     payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     memset(resp, 0, sizeof(resp));
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          resp, UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /* Set host Config Setting registers */
> > +     err = host->ops->uhs2_control(host, UHS2_SET_CONFIG);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__);
> > +             return err;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int sd_uhs2_go_dormant(struct mmc_host *host, u32 node_id)
> > +{
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     __be32 payload[1];
> > +     int err;
> > +
> > +     /* Disable Normal INT */
> > +     err = host->ops->uhs2_control(host, UHS2_DISABLE_INT);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 DISABLE_INT fail!\n",
> > +                    mmc_hostname(host), __func__);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 Figure 6-17 to see GO_DORMANT_STATE CCMD format.
> > +      * Header:
> > +      *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      *      - IOADR = CMD_BASE + 001h
> > +      * Payload:
> > +      *      - bit [7]: HBR(Entry to Hibernate Mode)
> > +      *                 1: Host intends to enter Hibernate mode during Dormant state.
> > +      *                 The default setting is 0 because hibernate is currently not supported.
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> > +     arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_WRITE |
> > +             UHS2_NATIVE_CMD_PLEN_4B |
> > +             (UHS2_DEV_CMD_GO_DORMANT_STATE >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_GO_DORMANT_PAYLOAD_LEN,
> > +                          NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /* Check Dormant State in Present */
> > +     err = host->ops->uhs2_control(host, UHS2_CHECK_DORMANT);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Disable UHS2 card clock */
> > +     err = host->ops->uhs2_control(host, UHS2_DISABLE_CLK);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Restore sd clock */
> > +     mmc_delay(5);
> > +     err = host->ops->uhs2_control(host, UHS2_ENABLE_CLK);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Enable Normal INT */
> > +     err = host->ops->uhs2_control(host, UHS2_ENABLE_INT);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Detect UHS2 */
> > +     err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> > +     if (err)
> > +             return err;
> > +
> >       return 0;
> >  }
> >
> > -/*
> > - * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> > - * commands/requests to be backwards compatible through the legacy SD protocol.
> > - * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> > - * be set through a legacy CMD6. Note that, the power limit that becomes set,
> > - * survives a soft reset through the GO_DORMANT_STATE command.
> > - */
> > -static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> > +static int __sd_uhs2_wait_active_state_cb(void *cb_data, bool *busy)
> >  {
> > +     struct sd_uhs2_wait_active_state_data *data = cb_data;
> > +     struct mmc_host *host = data->host;
> > +     struct mmc_command *cmd = data->cmd;
> > +     int err;
> > +
> > +     err = mmc_wait_for_cmd(host, cmd, 0);
> > +     if (err)
> > +             return err;
> > +
> > +     if (cmd->resp[1] & UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE)
> > +             *busy = false;
> > +     else
> > +             *busy = true;
> > +
> >       return 0;
> >  }
> >
> > +static int sd_uhs2_go_dormant_state(struct mmc_host *host, u32 node_id)
> > +{
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     int err;
> > +     struct sd_uhs2_wait_active_state_data cb_data = {
> > +             .host = host,
> > +             .cmd = &cmd
> > +     };
> > +
> > +     err = sd_uhs2_go_dormant(host, node_id);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Use Control Read CCMD to check Config Completion(bit 63) in Generic Setting Register.
> > +      * - Control Read(R/W=0) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> > +      *
> > +      * When UHS-II card been switched to new speed mode, it will set Config Completion to 1.
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> > +     arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_READ |
> > +             UHS2_NATIVE_CMD_PLEN_8B |
> > +             (UHS2_DEV_CONFIG_GEN_SET >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +     err = __mmc_poll_for_busy(host, UHS2_WAIT_CFG_COMPLETE_PERIOD_US,
> > +                               UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS,
> > +                               &__sd_uhs2_wait_active_state_cb, &cb_data);
> > +     if (err) {
> > +             pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__);
> > +             return err;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static void sd_uhs2_remove(struct mmc_host *host)
> > +{
> > +     mmc_remove_card(host->card);
> > +     host->card = NULL;
> > +}
> > +
> >  /*
> >   * Allocate the data structure for the mmc_card and run the UHS-II specific
> >   * initialization sequence.
> >   */
> > -static int sd_uhs2_init_card(struct mmc_host *host)
> > +static int sd_uhs2_init_card(struct mmc_host *host, struct mmc_card *oldcard)
> >  {
> >       struct mmc_card *card;
> >       u32 node_id;
> > @@ -133,9 +834,14 @@ static int sd_uhs2_init_card(struct mmc_host *host)
> >       if (err)
> >               return err;
> >
> > -     card = mmc_alloc_card(host, &sd_type);
> > -     if (IS_ERR(card))
> > -             return PTR_ERR(card);
> > +     if (oldcard) {
> > +             card = oldcard;
> > +     } else {
> > +             card = mmc_alloc_card(host, &sd_type);
> > +             if (IS_ERR(card))
> > +                     return PTR_ERR(card);
> > +     }
> > +     host->card = card;
> >
> >       card->uhs2_config.node_id = node_id;
> >       card->type = MMC_TYPE_SD;
> > @@ -148,18 +854,226 @@ static int sd_uhs2_init_card(struct mmc_host *host)
> >       if (err)
> >               goto err;
> >
> > -     host->card = card;
> > +     /* If change speed to Range B, need to GO_DORMANT_STATE */
> > +     if (host->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> > +         host->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) {
> > +             err = sd_uhs2_go_dormant_state(host, node_id);
> > +             if (err)
> > +                     return err;
> > +     }
> > +
> > +     host->flags |= MMC_UHS2_SD_TRAN;
> > +
> >       return 0;
> >
> >  err:
> > -     mmc_remove_card(card);
> > +     sd_uhs2_remove(host);
> >       return err;
> >  }
> >
> > -static void sd_uhs2_remove(struct mmc_host *host)
> > +int sd_uhs2_reinit(struct mmc_host *host)
> >  {
> > -     mmc_remove_card(host->card);
> > -     host->card = NULL;
> > +     struct mmc_card *card = host->card;
> > +     int err;
> > +
> > +     sd_uhs2_power_up(host);
> > +     err = sd_uhs2_phy_init(host);
> > +     if (err)
> > +             return err;
> > +
> > +     err = sd_uhs2_init_card(host, card);
> > +     if (err)
> > +             return err;
> > +
> > +     mmc_card_set_present(card);
> > +     return err;
> > +}
> > +
> > +/*
> > + * Mask off any voltages we don't support and select
> > + * the lowest voltage
> > + */
> > +u32 sd_uhs2_select_voltage(struct mmc_host *host, u32 ocr)
> > +{
> > +     int bit;
> > +     int err;
> > +
> > +     /*
> > +      * Sanity check the voltages that the card claims to
> > +      * support.
> > +      */
> > +     if (ocr & 0x7F) {
> > +             dev_warn(mmc_dev(host), "card claims to support voltages below defined range\n");
> > +             ocr &= ~0x7F;
> > +     }
> > +
> > +     ocr &= host->ocr_avail;
> > +     if (!ocr) {
> > +             dev_warn(mmc_dev(host), "no support for card's volts\n");
> > +             return 0;
> > +     }
> > +
> > +     if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
> > +             bit = ffs(ocr) - 1;
> > +             ocr &= 3 << bit;
> > +             /* Power cycle */
> > +             err = sd_uhs2_power_off(host);
> > +             if (err)
> > +                     return 0;
> > +             err = sd_uhs2_reinit(host);
> > +             if (err)
> > +                     return 0;
> > +     } else {
> > +             bit = fls(ocr) - 1;
> > +             ocr &= 3 << bit;
> > +             if (bit != host->ios.vdd)
> > +                     dev_warn(mmc_dev(host), "exceeding card's volts\n");
> > +     }
> > +
> > +     return ocr;
> > +}
> > +
> > +/*
> > + * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> > + * commands/requests to be backwards compatible through the legacy SD protocol.
> > + * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> > + * be set through a legacy CMD6. Note that, the power limit that becomes set,
> > + * survives a soft reset through the GO_DORMANT_STATE command.
> > + */
> > +static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> > +{
> > +     int err;
> > +     u32 cid[4];
> > +     u32 ocr;
> > +     u32 rocr;
> > +     u8  *status;
> > +     int ro;
> > +
> > +     /* Send CMD0 to reset SD card */
> > +     err = __mmc_go_idle(host);
> > +     if (err)
> > +             return err;
> > +
> > +     mmc_delay(1);
> > +
> > +     /* Send CMD8 to communicate SD interface operation condition */
> > +     err = mmc_send_if_cond(host, host->ocr_avail);
> > +     if (err) {
> > +             dev_warn(mmc_dev(host), "CMD8 error\n");
> > +             goto err;
> > +     }
> > +
> > +     /*
> > +      * Probe SD card working voltage.
> > +      */
> > +     err = mmc_send_app_op_cond(host, 0, &ocr);
> > +     if (err)
> > +             goto err;
> > +
> > +     card->ocr = ocr;
> > +
> > +     /*
> > +      * Some SD cards claims an out of spec VDD voltage range. Let's treat
> > +      * these bits as being in-valid and especially also bit7.
> > +      */
> > +     ocr &= ~0x7FFF;
> > +     rocr = sd_uhs2_select_voltage(host, ocr);
> > +     /*
> > +      * Some cards have zero value of rocr in UHS-II mode. Assign host's
> > +      * ocr value to rocr.
> > +      */
> > +     if (!rocr)
> > +             rocr = host->ocr_avail;
> > +
> > +     rocr |= (SD_OCR_CCS | SD_OCR_XPC);
> > +
> > +     /* Wait SD power on ready */
> > +     ocr = rocr;
> > +
> > +     err = mmc_send_app_op_cond(host, ocr, &rocr);
> > +     if (err)
> > +             goto err;
> > +
> > +     err = mmc_send_cid(host, cid);
> > +     if (err)
> > +             goto err;
> > +
> > +     memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
> > +     mmc_decode_cid(card);
> > +
> > +     /*
> > +      * For native busses:  get card RCA and quit open drain mode.
> > +      */
> > +     err = mmc_send_relative_addr(host, &card->rca);
> > +     if (err)
> > +             goto err;
> > +
> > +     err = mmc_sd_get_csd(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     /*
> > +      * Select card, as all following commands rely on that.
> > +      */
> > +     err = mmc_select_card(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     /*
> > +      * Fetch SCR from card.
> > +      */
> > +     err = mmc_app_send_scr(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     err = mmc_decode_scr(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     /*
> > +      * Switch to high power consumption mode.
> > +      * Even switch failed, sd card can still work at lower power consumption mode, but
> > +      * performance will be lower than high power consumption mode.
> > +      */
> > +     status = kmalloc(64, GFP_KERNEL);
> > +     if (!status)
> > +             return -ENOMEM;
> > +
> > +     if (!(card->csd.cmdclass & CCC_SWITCH)) {
> > +             pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
> > +                     mmc_hostname(card->host));
> > +     } else {
> > +             /* send CMD6 to set Maximum Power Consumption to get better performance */
> > +             err = mmc_sd_switch(card, 0, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> > +             if (!err)
> > +                     err = mmc_sd_switch(card, 1, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> > +
> > +             err = 0;
> > +     }
> > +
> > +     /*
> > +      * Check if read-only switch is active.
> > +      */
> > +     ro = mmc_sd_get_ro(host);
> > +     if (ro < 0) {
> > +             pr_warn("%s: host does not support read-only switch, assuming write-enable\n",
> > +                     mmc_hostname(host));
> > +     } else if (ro > 0) {
> > +             mmc_card_set_readonly(card);
> > +     }
> > +
> > +     /*
> > +      * NOTE:
> > +      * Should we read Externsion Register to check power notification feature here?
> > +      */
> > +
> > +     kfree(status);
> > +
> > +     return 0;
> > +
> > +err:
> > +     sd_uhs2_remove(host);
> > +     return err;
> >  }
> >
> >  static int sd_uhs2_alive(struct mmc_host *host)
> > @@ -181,38 +1095,181 @@ static void sd_uhs2_detect(struct mmc_host *host)
> >               mmc_claim_host(host);
> >               mmc_detach_bus(host);
> >               sd_uhs2_power_off(host);
> > +             host->flags &= ~MMC_UHS2_SUPPORT;
> >               mmc_release_host(host);
> >       }
> >  }
> >
> > +static int _sd_uhs2_suspend(struct mmc_host *host)
> > +{
> > +     struct mmc_card *card = host->card;
> > +     int err = 0;
> > +
> > +     mmc_claim_host(host);
> > +
> > +     if (mmc_card_suspended(card))
> > +             goto out;
> > +
> > +     if (mmc_sd_can_poweroff_notify(card))
> > +             err = sd_poweroff_notify(card);
> > +
> > +     if (!err) {
> > +             sd_uhs2_power_off(host);
> > +             mmc_card_set_suspended(card);
> > +     }
> > +
> > +out:
> > +     mmc_release_host(host);
> > +     return err;
> > +}
> > +
> > +/*
> > + * Callback for suspend
> > + */
> >  static int sd_uhs2_suspend(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     err = _sd_uhs2_suspend(host);
> > +     if (!err) {
> > +             pm_runtime_disable(&host->card->dev);
> > +             pm_runtime_set_suspended(&host->card->dev);
> > +     }
> > +
> > +     return err;
> >  }
> >
> > +/*
> > + * This function tries to determine if the same card is still present
> > + * and, if so, restore all state to it.
> > + */
> > +static int _mmc_sd_uhs2_resume(struct mmc_host *host)
> > +{
> > +     int err = 0;
> > +
> > +     mmc_claim_host(host);
> > +
> > +     if (!mmc_card_suspended(host->card))
> > +             goto out;
> > +
> > +     /* Power up UHS2 SD card and re-initialize it. */
> > +     err = sd_uhs2_reinit(host);
> > +     mmc_card_clr_suspended(host->card);
> > +
> > +out:
> > +     mmc_release_host(host);
> > +     return err;
> > +}
> > +
> > +/*
> > + * Callback for resume
> > + */
> >  static int sd_uhs2_resume(struct mmc_host *host)
> >  {
> > +     pm_runtime_enable(&host->card->dev);
> >       return 0;
> >  }
> >
> > +/*
> > + * Callback for runtime_suspend.
> > + */
> >  static int sd_uhs2_runtime_suspend(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
> > +             return 0;
> > +
> > +     err = _sd_uhs2_suspend(host);
> > +     if (err)
> > +             pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err);
> > +
> > +     return err;
> >  }
> >
> >  static int sd_uhs2_runtime_resume(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     err = _mmc_sd_uhs2_resume(host);
> > +     if (err && err != -ENOMEDIUM)
> > +             pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err);
> > +
> > +     return err;
> >  }
> >
> > -static int sd_uhs2_shutdown(struct mmc_host *host)
> > +static int sd_uhs2_hw_reset(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     sd_uhs2_power_off(host);
> > +     /* Wait at least 1 ms according to SD spec */
> > +     mmc_delay(1);
> > +     sd_uhs2_power_up(host);
> > +
> > +     err = sd_uhs2_reinit(host);
> > +
> > +     return err;
> >  }
> >
> > -static int sd_uhs2_hw_reset(struct mmc_host *host)
> > +/*
> > + * mmc_uhs2_prepare_cmd - prepare for SD command packet
> > + * @host:    MMC host
> > + * @mrq:     MMC request
> > + *
> > + * Initialize and fill in a header and a payload of SD command packet.
> > + * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
> > + * advance.
> > + *
> > + * Return:   0 on success, non-zero error on failure
> > + */
> > +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
> >  {
> > -     return 0;
> > +     struct mmc_command *cmd;
> > +     struct uhs2_command *uhs2_cmd;
> > +     u16 header, arg;
> > +     __be32 *payload;
> > +     u8 plen;
> > +
> > +     cmd = mrq->cmd;
> > +     header = host->card->uhs2_config.node_id;
> > +     if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> > +             header |= UHS2_PACKET_TYPE_DCMD;
> > +     else
> > +             header |= UHS2_PACKET_TYPE_CCMD;
> > +
> > +     arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
> > +     if (host->uhs2_app_cmd) {
> > +             arg |= UHS2_SD_CMD_APP;
> > +             host->uhs2_app_cmd = false;
> > +     }
> > +
> > +     uhs2_cmd = cmd->uhs2_cmd;
> > +     payload = uhs2_cmd->payload;
> > +     plen = 2; /* at the maximum */
> > +
> > +     if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
> > +         !cmd->uhs2_tmode0_flag) {
> > +             if (mmc_card_uhs2_hd_mode(host))
> > +                     arg |= UHS2_DCMD_2L_HD_MODE;
> > +
> > +             arg |= UHS2_DCMD_LM_TLEN_EXIST;
> > +
> > +             if (cmd->data->blocks == 1 &&
> > +                 cmd->data->blksz != 512 &&
> > +                 cmd->opcode != MMC_READ_SINGLE_BLOCK &&
> > +                 cmd->opcode != MMC_WRITE_BLOCK) {
> > +                     arg |= UHS2_DCMD_TLUM_BYTE_MODE;
> > +                     payload[1] = cpu_to_be32(cmd->data->blksz);
> > +             } else {
> > +                     payload[1] = cpu_to_be32(cmd->data->blocks);
> > +             }
> > +     } else {
> > +             plen = 1;
> > +     }
> > +
> > +     payload[0] = cpu_to_be32(cmd->arg);
> > +     sd_uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
> >  }
> >
> >  static const struct mmc_bus_ops sd_uhs2_ops = {
> > @@ -223,7 +1280,7 @@ static const struct mmc_bus_ops sd_uhs2_ops = {
> >       .resume = sd_uhs2_resume,
> >       .runtime_suspend = sd_uhs2_runtime_suspend,
> >       .runtime_resume = sd_uhs2_runtime_resume,
> > -     .shutdown = sd_uhs2_shutdown,
> > +     .shutdown = sd_uhs2_suspend,
> >       .hw_reset = sd_uhs2_hw_reset,
> >  };
> >
> > @@ -231,6 +1288,8 @@ static int sd_uhs2_attach(struct mmc_host *host)
> >  {
> >       int err;
> >
> > +     host->flags |= MMC_UHS2_SUPPORT;
> > +
> >       err = sd_uhs2_power_up(host);
> >       if (err)
> >               goto err;
> > @@ -239,7 +1298,7 @@ static int sd_uhs2_attach(struct mmc_host *host)
> >       if (err)
> >               goto err;
> >
> > -     err = sd_uhs2_init_card(host);
> > +     err = sd_uhs2_init_card(host, NULL);
> >       if (err)
> >               goto err;
> >
> > @@ -256,21 +1315,32 @@ static int sd_uhs2_attach(struct mmc_host *host)
> >               goto remove_card;
> >
> >       mmc_claim_host(host);
> > +
> >       return 0;
> >
> >  remove_card:
> > -     mmc_remove_card(host->card);
> > -     host->card = NULL;
> > +     sd_uhs2_remove(host);
> >       mmc_claim_host(host);
> > -     mmc_detach_bus(host);
> > +
> >  err:
> > +     mmc_detach_bus(host);
> >       sd_uhs2_power_off(host);
> > +     host->flags &= ~MMC_UHS2_SUPPORT;
> >       return err;
> >  }
> >
> > +/**
> > + * mmc_attach_sd_uhs2 - select UHS2 interface
> > + * @host: MMC host
> > + *
> > + * Try to select UHS2 interface and initialize the bus for a given
> > + * frequency, @freq.
> > + *
> > + * Return:   0 on success, non-zero error on failure
> > + */
> >  int mmc_attach_sd_uhs2(struct mmc_host *host)
> >  {
> > -     int i, err = 0;
> > +     int i, err;
> >
> >       if (!(host->caps2 & MMC_CAP2_SD_UHS2))
> >               return -EOPNOTSUPP;
> > @@ -285,6 +1355,9 @@ int mmc_attach_sd_uhs2(struct mmc_host *host)
> >        */
> >       for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) {
> >               host->f_init = sd_uhs2_freqs[i];
> > +             pr_info("%s: %s: trying to init UHS-II card at %u Hz\n",
> > +                     mmc_hostname(host), __func__, host->f_init);
> > +
> >               err = sd_uhs2_attach(host);
> >               if (!err)
> >                       break;
>
Ulf Hansson Aug. 8, 2023, 1:47 p.m. UTC | #3
On Fri, 21 Jul 2023 at 12:14, Victor Shih <victorshihgli@gmail.com> wrote:
>
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
>
> Embed UHS-II access/control functionality into the MMC request
> processing flow.

This deserves to be extended a bit. There is quite some code being
added in the $subject patch.

>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
>
> Updates in V8:
>  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
>  - Modify return value in sd_uhs2_attach().
>
> Updates in V7:
>  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
>  - Drop uhs2_state in favor of ios->timing.
>  - Remove unnecessary functions.
>
> ---
>
>  drivers/mmc/core/block.c   |   18 +-
>  drivers/mmc/core/core.c    |    8 +
>  drivers/mmc/core/mmc_ops.c |   25 +-
>  drivers/mmc/core/mmc_ops.h |    1 +
>  drivers/mmc/core/sd.c      |   13 +-
>  drivers/mmc/core/sd.h      |    4 +
>  drivers/mmc/core/sd_ops.c  |   11 +
>  drivers/mmc/core/sd_ops.h  |   18 +
>  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
>  9 files changed, 1176 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index f701efb1fa78..6617ae9fc840 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
>
>         struct scatterlist sg;
>
> -       cmd.opcode = MMC_APP_CMD;
> -       cmd.arg = card->rca << 16;
> -       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> -
> -       err = mmc_wait_for_cmd(card->host, &cmd, 0);
> -       if (err)
> -               return err;
> -       if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> -               return -EIO;
> +       err = mmc_app_cmd(card->host, card);
> +               if (err)
> +                       return err;
>
>         memset(&cmd, 0, sizeof(struct mmc_command));

The entire chunk of change above deserves its own separate
cleanup-patch. If you want to send it separately I can apply
immediately - or if you decide to make it part of the series then it
should precede the $subject patch.

Note that, after the cleanup above, the call to memset() can be dropped too.

>
> @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,

I commented on the changes in mmc_blk_rw_rq_prep() already in version
6 [1] - but it seems like you haven't addressed my comments yet.

I have therefore copied the similar comment again, see below.

>         struct request *req = mmc_queue_req_to_req(mqrq);
>         struct mmc_blk_data *md = mq->blkdata;
>         bool do_rel_wr, do_data_tag;
> +       bool do_multi;
> +
> +       do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
>
>         mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
>
> @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>                 brq->cmd.arg <<= 9;
>         brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
>
> -       if (brq->data.blocks > 1 || do_rel_wr) {
> +       if (brq->data.blocks > 1 || do_rel_wr || do_multi) {

This looks wrong to me. UHS2 can use single block read/writes too. Right?

>                 /* SPI multiblock writes terminate using a special
>                  * token, not a STOP_TRANSMISSION request.
>                  */
> @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>                 brq->mrq.stop = NULL;
>                 readcmd = MMC_READ_SINGLE_BLOCK;
>                 writecmd = MMC_WRITE_BLOCK;
> +               brq->cmd.uhs2_tmode0_flag = 1;
>         }

As "do_multi" is always set for UHS2, setting this flag here seems to
be wrong/redundant.

Anyway, if I understand correctly, the flag is intended to be used to
inform the host driver whether the so-called 2L_HD_mode (half-duplex
or full-duplex) should be used for the I/O request or not. Did I
understand this correctly?

To fix the above behaviour, I suggest we try to move the entire
control of the flag into mmc_uhs2_prepare_cmd(). It seems like we need
the flag to be set for multi block read/writes (CMD18 and CMD25), but
only if the host and card supports the 2L_HD_mode too, right?

According to my earlier suggestions, we should also be able to check
the 2L_HD_mode via the bits we have set in the ios->timing, no?

Moreover, by making mmc_uhs2_prepare_cmd() responsible for setting the
flag, we can move the definition of the flag into the struct
uhs2_command instead. While at it, I suggest we also rename the flag
into "tmode_half_duplex", to better describe its purpose. Note that,
this also means the interpretation of the flag becomes inverted.

>         brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
>

Until we have agreed on how to move forward with the above, I am
temporarily pausing further review.

[...]

Kind regards
Uffe

[1]
https://lore.kernel.org/linux-mmc/CAPDyKFoV3Ch-xzXxiT2RnDeLvsO454Pwq1vQL_bdNLptM+amAg@mail.gmail.com/
Victor Shih Aug. 9, 2023, 3:09 p.m. UTC | #4
On Tue, Aug 8, 2023 at 9:48 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Fri, 21 Jul 2023 at 12:14, Victor Shih <victorshihgli@gmail.com> wrote:
> >
> > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> >
> > Embed UHS-II access/control functionality into the MMC request
> > processing flow.
>
> This deserves to be extended a bit. There is quite some code being
> added in the $subject patch.
>
> >
> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > ---
> >
> > Updates in V8:
> >  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> >  - Modify return value in sd_uhs2_attach().
> >
> > Updates in V7:
> >  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> >  - Drop uhs2_state in favor of ios->timing.
> >  - Remove unnecessary functions.
> >
> > ---
> >
> >  drivers/mmc/core/block.c   |   18 +-
> >  drivers/mmc/core/core.c    |    8 +
> >  drivers/mmc/core/mmc_ops.c |   25 +-
> >  drivers/mmc/core/mmc_ops.h |    1 +
> >  drivers/mmc/core/sd.c      |   13 +-
> >  drivers/mmc/core/sd.h      |    4 +
> >  drivers/mmc/core/sd_ops.c  |   11 +
> >  drivers/mmc/core/sd_ops.h  |   18 +
> >  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
> >  9 files changed, 1176 insertions(+), 59 deletions(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index f701efb1fa78..6617ae9fc840 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
> >
> >         struct scatterlist sg;
> >
> > -       cmd.opcode = MMC_APP_CMD;
> > -       cmd.arg = card->rca << 16;
> > -       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> > -
> > -       err = mmc_wait_for_cmd(card->host, &cmd, 0);
> > -       if (err)
> > -               return err;
> > -       if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> > -               return -EIO;
> > +       err = mmc_app_cmd(card->host, card);
> > +               if (err)
> > +                       return err;
> >
> >         memset(&cmd, 0, sizeof(struct mmc_command));
>
> The entire chunk of change above deserves its own separate
> cleanup-patch. If you want to send it separately I can apply
> immediately - or if you decide to make it part of the series then it
> should precede the $subject patch.
>
> Note that, after the cleanup above, the call to memset() can be dropped too.
>

Hi, Ulf

     Which patch do you think would be the best if I decided to make
it part of the series?

Thanks, Victor Shih

> >
> > @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>
> I commented on the changes in mmc_blk_rw_rq_prep() already in version
> 6 [1] - but it seems like you haven't addressed my comments yet.
>
> I have therefore copied the similar comment again, see below.
>
> >         struct request *req = mmc_queue_req_to_req(mqrq);
> >         struct mmc_blk_data *md = mq->blkdata;
> >         bool do_rel_wr, do_data_tag;
> > +       bool do_multi;
> > +
> > +       do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
> >
> >         mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
> >
> > @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >                 brq->cmd.arg <<= 9;
> >         brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> >
> > -       if (brq->data.blocks > 1 || do_rel_wr) {
> > +       if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
>
> This looks wrong to me. UHS2 can use single block read/writes too. Right?
>
> >                 /* SPI multiblock writes terminate using a special
> >                  * token, not a STOP_TRANSMISSION request.
> >                  */
> > @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >                 brq->mrq.stop = NULL;
> >                 readcmd = MMC_READ_SINGLE_BLOCK;
> >                 writecmd = MMC_WRITE_BLOCK;
> > +               brq->cmd.uhs2_tmode0_flag = 1;
> >         }
>
> As "do_multi" is always set for UHS2, setting this flag here seems to
> be wrong/redundant.
>
> Anyway, if I understand correctly, the flag is intended to be used to
> inform the host driver whether the so-called 2L_HD_mode (half-duplex
> or full-duplex) should be used for the I/O request or not. Did I
> understand this correctly?
>
> To fix the above behaviour, I suggest we try to move the entire
> control of the flag into mmc_uhs2_prepare_cmd(). It seems like we need
> the flag to be set for multi block read/writes (CMD18 and CMD25), but
> only if the host and card supports the 2L_HD_mode too, right?
>
> According to my earlier suggestions, we should also be able to check
> the 2L_HD_mode via the bits we have set in the ios->timing, no?
>
> Moreover, by making mmc_uhs2_prepare_cmd() responsible for setting the
> flag, we can move the definition of the flag into the struct
> uhs2_command instead. While at it, I suggest we also rename the flag
> into "tmode_half_duplex", to better describe its purpose. Note that,
> this also means the interpretation of the flag becomes inverted.
>
> >         brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
> >
>
> Until we have agreed on how to move forward with the above, I am
> temporarily pausing further review.
>
> [...]
>
> Kind regards
> Uffe
>
> [1]
> https://lore.kernel.org/linux-mmc/CAPDyKFoV3Ch-xzXxiT2RnDeLvsO454Pwq1vQL_bdNLptM+amAg@mail.gmail.com/
Ulf Hansson Aug. 10, 2023, 10:06 a.m. UTC | #5
On Wed, 9 Aug 2023 at 17:09, Victor Shih <victorshihgli@gmail.com> wrote:
>
> On Tue, Aug 8, 2023 at 9:48 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Fri, 21 Jul 2023 at 12:14, Victor Shih <victorshihgli@gmail.com> wrote:
> > >
> > > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> > >
> > > Embed UHS-II access/control functionality into the MMC request
> > > processing flow.
> >
> > This deserves to be extended a bit. There is quite some code being
> > added in the $subject patch.
> >
> > >
> > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
> > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > > ---
> > >
> > > Updates in V8:
> > >  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> > >  - Modify return value in sd_uhs2_attach().
> > >
> > > Updates in V7:
> > >  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> > >  - Drop uhs2_state in favor of ios->timing.
> > >  - Remove unnecessary functions.
> > >
> > > ---
> > >
> > >  drivers/mmc/core/block.c   |   18 +-
> > >  drivers/mmc/core/core.c    |    8 +
> > >  drivers/mmc/core/mmc_ops.c |   25 +-
> > >  drivers/mmc/core/mmc_ops.h |    1 +
> > >  drivers/mmc/core/sd.c      |   13 +-
> > >  drivers/mmc/core/sd.h      |    4 +
> > >  drivers/mmc/core/sd_ops.c  |   11 +
> > >  drivers/mmc/core/sd_ops.h  |   18 +
> > >  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
> > >  9 files changed, 1176 insertions(+), 59 deletions(-)
> > >
> > > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > > index f701efb1fa78..6617ae9fc840 100644
> > > --- a/drivers/mmc/core/block.c
> > > +++ b/drivers/mmc/core/block.c
> > > @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
> > >
> > >         struct scatterlist sg;
> > >
> > > -       cmd.opcode = MMC_APP_CMD;
> > > -       cmd.arg = card->rca << 16;
> > > -       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> > > -
> > > -       err = mmc_wait_for_cmd(card->host, &cmd, 0);
> > > -       if (err)
> > > -               return err;
> > > -       if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> > > -               return -EIO;
> > > +       err = mmc_app_cmd(card->host, card);
> > > +               if (err)
> > > +                       return err;
> > >
> > >         memset(&cmd, 0, sizeof(struct mmc_command));
> >
> > The entire chunk of change above deserves its own separate
> > cleanup-patch. If you want to send it separately I can apply
> > immediately - or if you decide to make it part of the series then it
> > should precede the $subject patch.
> >
> > Note that, after the cleanup above, the call to memset() can be dropped too.
> >
>
> Hi, Ulf
>
>      Which patch do you think would be the best if I decided to make
> it part of the series?

Probably easier to send it separate, before a new respin of the
series. I can apply it immediately and you rebase your series on top.

If there is anything similar part of the series that also can be
considered as a cleanup, feel free to send that separate too, to get
that applied first.

Kind regards
Uffe

>
> Thanks, Victor Shih
>
> > >
> > > @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >
> > I commented on the changes in mmc_blk_rw_rq_prep() already in version
> > 6 [1] - but it seems like you haven't addressed my comments yet.
> >
> > I have therefore copied the similar comment again, see below.
> >
> > >         struct request *req = mmc_queue_req_to_req(mqrq);
> > >         struct mmc_blk_data *md = mq->blkdata;
> > >         bool do_rel_wr, do_data_tag;
> > > +       bool do_multi;
> > > +
> > > +       do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
> > >
> > >         mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
> > >
> > > @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > >                 brq->cmd.arg <<= 9;
> > >         brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > >
> > > -       if (brq->data.blocks > 1 || do_rel_wr) {
> > > +       if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
> >
> > This looks wrong to me. UHS2 can use single block read/writes too. Right?
> >
> > >                 /* SPI multiblock writes terminate using a special
> > >                  * token, not a STOP_TRANSMISSION request.
> > >                  */
> > > @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > >                 brq->mrq.stop = NULL;
> > >                 readcmd = MMC_READ_SINGLE_BLOCK;
> > >                 writecmd = MMC_WRITE_BLOCK;
> > > +               brq->cmd.uhs2_tmode0_flag = 1;
> > >         }
> >
> > As "do_multi" is always set for UHS2, setting this flag here seems to
> > be wrong/redundant.
> >
> > Anyway, if I understand correctly, the flag is intended to be used to
> > inform the host driver whether the so-called 2L_HD_mode (half-duplex
> > or full-duplex) should be used for the I/O request or not. Did I
> > understand this correctly?
> >
> > To fix the above behaviour, I suggest we try to move the entire
> > control of the flag into mmc_uhs2_prepare_cmd(). It seems like we need
> > the flag to be set for multi block read/writes (CMD18 and CMD25), but
> > only if the host and card supports the 2L_HD_mode too, right?
> >
> > According to my earlier suggestions, we should also be able to check
> > the 2L_HD_mode via the bits we have set in the ios->timing, no?
> >
> > Moreover, by making mmc_uhs2_prepare_cmd() responsible for setting the
> > flag, we can move the definition of the flag into the struct
> > uhs2_command instead. While at it, I suggest we also rename the flag
> > into "tmode_half_duplex", to better describe its purpose. Note that,
> > this also means the interpretation of the flag becomes inverted.
> >
> > >         brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
> > >
> >
> > Until we have agreed on how to move forward with the above, I am
> > temporarily pausing further review.
> >
> > [...]
> >
> > Kind regards
> > Uffe
> >
> > [1]
> > https://lore.kernel.org/linux-mmc/CAPDyKFoV3Ch-xzXxiT2RnDeLvsO454Pwq1vQL_bdNLptM+amAg@mail.gmail.com/
Victor Shih Aug. 18, 2023, 9:58 a.m. UTC | #6
On Thu, Aug 10, 2023 at 6:07 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Wed, 9 Aug 2023 at 17:09, Victor Shih <victorshihgli@gmail.com> wrote:
> >
> > On Tue, Aug 8, 2023 at 9:48 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > >
> > > On Fri, 21 Jul 2023 at 12:14, Victor Shih <victorshihgli@gmail.com> wrote:
> > > >
> > > > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> > > >
> > > > Embed UHS-II access/control functionality into the MMC request
> > > > processing flow.
> > >
> > > This deserves to be extended a bit. There is quite some code being
> > > added in the $subject patch.
> > >
> > > >
> > > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > > Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
> > > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > > > ---
> > > >
> > > > Updates in V8:
> > > >  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> > > >  - Modify return value in sd_uhs2_attach().
> > > >
> > > > Updates in V7:
> > > >  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> > > >  - Drop uhs2_state in favor of ios->timing.
> > > >  - Remove unnecessary functions.
> > > >
> > > > ---
> > > >
> > > >  drivers/mmc/core/block.c   |   18 +-
> > > >  drivers/mmc/core/core.c    |    8 +
> > > >  drivers/mmc/core/mmc_ops.c |   25 +-
> > > >  drivers/mmc/core/mmc_ops.h |    1 +
> > > >  drivers/mmc/core/sd.c      |   13 +-
> > > >  drivers/mmc/core/sd.h      |    4 +
> > > >  drivers/mmc/core/sd_ops.c  |   11 +
> > > >  drivers/mmc/core/sd_ops.h  |   18 +
> > > >  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
> > > >  9 files changed, 1176 insertions(+), 59 deletions(-)
> > > >
> > > > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > > > index f701efb1fa78..6617ae9fc840 100644
> > > > --- a/drivers/mmc/core/block.c
> > > > +++ b/drivers/mmc/core/block.c
> > > > @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
> > > >
> > > >         struct scatterlist sg;
> > > >
> > > > -       cmd.opcode = MMC_APP_CMD;
> > > > -       cmd.arg = card->rca << 16;
> > > > -       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> > > > -
> > > > -       err = mmc_wait_for_cmd(card->host, &cmd, 0);
> > > > -       if (err)
> > > > -               return err;
> > > > -       if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> > > > -               return -EIO;
> > > > +       err = mmc_app_cmd(card->host, card);
> > > > +               if (err)
> > > > +                       return err;
> > > >
> > > >         memset(&cmd, 0, sizeof(struct mmc_command));
> > >
> > > The entire chunk of change above deserves its own separate
> > > cleanup-patch. If you want to send it separately I can apply
> > > immediately - or if you decide to make it part of the series then it
> > > should precede the $subject patch.
> > >
> > > Note that, after the cleanup above, the call to memset() can be dropped too.
> > >
> >
> > Hi, Ulf
> >
> >      Which patch do you think would be the best if I decided to make
> > it part of the series?
>
> Probably easier to send it separate, before a new respin of the
> series. I can apply it immediately and you rebase your series on top.
>
> If there is anything similar part of the series that also can be
> considered as a cleanup, feel free to send that separate too, to get
> that applied first.
>
> Kind regards
> Uffe
>
> >
> > Thanks, Victor Shih
> >
> > > >
> > > > @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > >
> > > I commented on the changes in mmc_blk_rw_rq_prep() already in version
> > > 6 [1] - but it seems like you haven't addressed my comments yet.
> > >
> > > I have therefore copied the similar comment again, see below.
> > >
> > > >         struct request *req = mmc_queue_req_to_req(mqrq);
> > > >         struct mmc_blk_data *md = mq->blkdata;
> > > >         bool do_rel_wr, do_data_tag;
> > > > +       bool do_multi;
> > > > +
> > > > +       do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
> > > >
> > > >         mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
> > > >
> > > > @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > > >                 brq->cmd.arg <<= 9;
> > > >         brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > > >
> > > > -       if (brq->data.blocks > 1 || do_rel_wr) {
> > > > +       if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
> > >
> > > This looks wrong to me. UHS2 can use single block read/writes too. Right?
> > >
> > > >                 /* SPI multiblock writes terminate using a special
> > > >                  * token, not a STOP_TRANSMISSION request.
> > > >                  */
> > > > @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > > >                 brq->mrq.stop = NULL;
> > > >                 readcmd = MMC_READ_SINGLE_BLOCK;
> > > >                 writecmd = MMC_WRITE_BLOCK;
> > > > +               brq->cmd.uhs2_tmode0_flag = 1;
> > > >         }
> > >
> > > As "do_multi" is always set for UHS2, setting this flag here seems to
> > > be wrong/redundant.
> > >
> > > Anyway, if I understand correctly, the flag is intended to be used to
> > > inform the host driver whether the so-called 2L_HD_mode (half-duplex
> > > or full-duplex) should be used for the I/O request or not. Did I
> > > understand this correctly?
> > >
> > > To fix the above behaviour, I suggest we try to move the entire
> > > control of the flag into mmc_uhs2_prepare_cmd(). It seems like we need
> > > the flag to be set for multi block read/writes (CMD18 and CMD25), but
> > > only if the host and card supports the 2L_HD_mode too, right?
> > >
> > > According to my earlier suggestions, we should also be able to check
> > > the 2L_HD_mode via the bits we have set in the ios->timing, no?
> > >
> > > Moreover, by making mmc_uhs2_prepare_cmd() responsible for setting the
> > > flag, we can move the definition of the flag into the struct
> > > uhs2_command instead. While at it, I suggest we also rename the flag
> > > into "tmode_half_duplex", to better describe its purpose. Note that,
> > > this also means the interpretation of the flag becomes inverted.
> > >

Hi, Ulf

     I will drop do_multi and use tmode_half_duplex to stead of
     the uhs2_tmode0_flag  in the V10 version.

Thanks, Victor Shih

> > > >         brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
> > > >
> > >
> > > Until we have agreed on how to move forward with the above, I am
> > > temporarily pausing further review.
> > >
> > > [...]
> > >
> > > Kind regards
> > > Uffe
> > >
> > > [1]
> > > https://lore.kernel.org/linux-mmc/CAPDyKFoV3Ch-xzXxiT2RnDeLvsO454Pwq1vQL_bdNLptM+amAg@mail.gmail.com/
diff mbox series

Patch

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index f701efb1fa78..6617ae9fc840 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -918,15 +918,9 @@  static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
 
 	struct scatterlist sg;
 
-	cmd.opcode = MMC_APP_CMD;
-	cmd.arg = card->rca << 16;
-	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
-
-	err = mmc_wait_for_cmd(card->host, &cmd, 0);
-	if (err)
-		return err;
-	if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
-		return -EIO;
+	err = mmc_app_cmd(card->host, card);
+		if (err)
+			return err;
 
 	memset(&cmd, 0, sizeof(struct mmc_command));
 
@@ -1612,6 +1606,9 @@  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	struct request *req = mmc_queue_req_to_req(mqrq);
 	struct mmc_blk_data *md = mq->blkdata;
 	bool do_rel_wr, do_data_tag;
+	bool do_multi;
+
+	do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
 
 	mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
 
@@ -1622,7 +1619,7 @@  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 		brq->cmd.arg <<= 9;
 	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
-	if (brq->data.blocks > 1 || do_rel_wr) {
+	if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
 		/* SPI multiblock writes terminate using a special
 		 * token, not a STOP_TRANSMISSION request.
 		 */
@@ -1635,6 +1632,7 @@  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 		brq->mrq.stop = NULL;
 		readcmd = MMC_READ_SINGLE_BLOCK;
 		writecmd = MMC_WRITE_BLOCK;
+		brq->cmd.uhs2_tmode0_flag = 1;
 	}
 	brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index ba8808cd9318..f5dc653eafb0 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -334,6 +334,8 @@  static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
 
 int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
+	struct uhs2_command uhs2_cmd;
+	__be32 payload[4]; /* for maximum size */
 	int err;
 
 	init_completion(&mrq->cmd_completion);
@@ -351,6 +353,8 @@  int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 	if (err)
 		return err;
 
+	mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
+
 	led_trigger_event(host->led, LED_FULL);
 	__mmc_start_request(host, mrq);
 
@@ -430,6 +434,8 @@  EXPORT_SYMBOL(mmc_wait_for_req_done);
  */
 int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	struct uhs2_command uhs2_cmd;
+	__be32 payload[4]; /* for maximum size */
 	int err;
 
 	/*
@@ -450,6 +456,8 @@  int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
 	if (err)
 		goto out_err;
 
+	mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
+
 	err = host->cqe_ops->cqe_request(host, mrq);
 	if (err)
 		goto out_err;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 3b3adbddf664..8ae205a07f9b 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -144,10 +144,24 @@  int mmc_set_dsr(struct mmc_host *host)
 	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 }
 
+int __mmc_go_idle(struct mmc_host *host)
+{
+	struct mmc_command cmd = {};
+	int err;
+
+	cmd.opcode = MMC_GO_IDLE_STATE;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	mmc_delay(1);
+
+	return err;
+}
+
 int mmc_go_idle(struct mmc_host *host)
 {
 	int err;
-	struct mmc_command cmd = {};
 
 	/*
 	 * Non-SPI hosts need to prevent chipselect going active during
@@ -163,13 +177,7 @@  int mmc_go_idle(struct mmc_host *host)
 		mmc_delay(1);
 	}
 
-	cmd.opcode = MMC_GO_IDLE_STATE;
-	cmd.arg = 0;
-	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
-
-	err = mmc_wait_for_cmd(host, &cmd, 0);
-
-	mmc_delay(1);
+	err = __mmc_go_idle(host);
 
 	if (!mmc_host_is_spi(host)) {
 		mmc_set_chip_select(host, MMC_CS_DONTCARE);
@@ -300,6 +308,7 @@  int mmc_send_adtc_data(struct mmc_card *card, struct mmc_host *host, u32 opcode,
 	 * not R1 plus a data block.
 	 */
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+	cmd.uhs2_tmode0_flag = 1;
 
 	data.blksz = len;
 	data.blocks = 1;
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 09ffbc00908b..abda7492d578 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -25,6 +25,7 @@  struct mmc_command;
 int mmc_select_card(struct mmc_card *card);
 int mmc_deselect_cards(struct mmc_host *host);
 int mmc_set_dsr(struct mmc_host *host);
+int __mmc_go_idle(struct mmc_host *host);
 int mmc_go_idle(struct mmc_host *host);
 int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
 int mmc_set_relative_addr(struct mmc_card *card);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 246ce027ae0a..15e465f0cc3f 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -207,7 +207,7 @@  static int mmc_decode_csd(struct mmc_card *card)
 /*
  * Given a 64-bit response, decode to our card SCR structure.
  */
-static int mmc_decode_scr(struct mmc_card *card)
+int mmc_decode_scr(struct mmc_card *card)
 {
 	struct sd_scr *scr = &card->scr;
 	unsigned int scr_struct;
@@ -904,7 +904,7 @@  int mmc_sd_get_csd(struct mmc_card *card)
 	return 0;
 }
 
-static int mmc_sd_get_ro(struct mmc_host *host)
+int mmc_sd_get_ro(struct mmc_host *host)
 {
 	int ro;
 
@@ -1616,11 +1616,6 @@  static void mmc_sd_detect(struct mmc_host *host)
 	}
 }
 
-static int sd_can_poweroff_notify(struct mmc_card *card)
-{
-	return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
-}
-
 static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
 {
 	struct sd_busy_data *data = cb_data;
@@ -1644,7 +1639,7 @@  static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
 	return 0;
 }
 
-static int sd_poweroff_notify(struct mmc_card *card)
+int sd_poweroff_notify(struct mmc_card *card)
 {
 	struct sd_busy_data cb_data;
 	u8 *reg_buf;
@@ -1692,7 +1687,7 @@  static int _mmc_sd_suspend(struct mmc_host *host)
 	if (mmc_card_suspended(card))
 		goto out;
 
-	if (sd_can_poweroff_notify(card))
+	if (mmc_sd_can_poweroff_notify(card))
 		err = sd_poweroff_notify(card);
 	else if (!mmc_host_is_spi(host))
 		err = mmc_deselect_cards(host);
diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
index 1af5a038bae9..d31259919ee5 100644
--- a/drivers/mmc/core/sd.h
+++ b/drivers/mmc/core/sd.h
@@ -11,10 +11,14 @@  struct mmc_card;
 
 int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
 int mmc_sd_get_csd(struct mmc_card *card);
+int mmc_sd_get_ro(struct mmc_host *host);
 void mmc_decode_cid(struct mmc_card *card);
 int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 	bool reinit);
 unsigned mmc_sd_get_max_clock(struct mmc_card *card);
 int mmc_sd_switch_hs(struct mmc_card *card);
 
+/* These call back functions were also used by UHS2 sd card */
+int sd_poweroff_notify(struct mmc_card *card);
+
 #endif
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index ef8d1dce5af1..1f9580491ad0 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -27,6 +27,15 @@  int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
 	if (WARN_ON(card && card->host != host))
 		return -EINVAL;
 
+	/*
+	 * UHS2 packet has APP bit so only set APP_CMD flag here.
+	 * Will set the APP bit when assembling UHS2 packet.
+	 */
+	if (host->flags & MMC_UHS2_SD_TRAN) {
+		host->uhs2_app_cmd = true;
+		return 0;
+	}
+
 	cmd.opcode = MMC_APP_CMD;
 
 	if (card) {
@@ -281,6 +290,7 @@  int mmc_app_send_scr(struct mmc_card *card)
 	cmd.opcode = SD_APP_SEND_SCR;
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+	cmd.uhs2_tmode0_flag = 1;
 
 	data.blksz = 8;
 	data.blocks = 1;
@@ -344,6 +354,7 @@  int mmc_app_sd_status(struct mmc_card *card, void *ssr)
 	cmd.opcode = SD_APP_SD_STATUS;
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
+	cmd.uhs2_tmode0_flag = 1;
 
 	data.blksz = 64;
 	data.blocks = 1;
diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
index 3ba7b3cf4652..8c2da57ca2c2 100644
--- a/drivers/mmc/core/sd_ops.h
+++ b/drivers/mmc/core/sd_ops.h
@@ -11,6 +11,7 @@ 
 #include <linux/types.h>
 
 struct mmc_card;
+struct mmc_command;
 struct mmc_host;
 
 int mmc_app_set_bus_width(struct mmc_card *card, int width);
@@ -19,10 +20,27 @@  int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
 int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr);
 int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
 int mmc_app_send_scr(struct mmc_card *card);
+int mmc_decode_scr(struct mmc_card *card);
 int mmc_sd_switch(struct mmc_card *card, int mode, int group,
 	u8 value, u8 *resp);
 int mmc_app_sd_status(struct mmc_card *card, void *ssr);
 int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
+void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
+
+static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq,
+					     struct uhs2_command uhs2_cmd, __be32 payload[4])
+{
+	if (host->flags & MMC_UHS2_SD_TRAN) {
+		uhs2_cmd.payload = payload;
+		mrq->cmd->uhs2_cmd = &uhs2_cmd;
+		mmc_uhs2_prepare_cmd(host, mrq);
+	}
+}
+
+static inline int mmc_sd_can_poweroff_notify(struct mmc_card *card)
+{
+	return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
+}
 
 #endif
 
diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
index 06b2aab52b93..0a1b00b59499 100644
--- a/drivers/mmc/core/sd_uhs2.c
+++ b/drivers/mmc/core/sd_uhs2.c
@@ -1,23 +1,51 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2021 Linaro Ltd
- *
  * Author: Ulf Hansson <ulf.hansson@linaro.org>
  *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ * Author: Yi Sun <yi.y.sun@intel.com>
+ *
+ * Copyright (C) 2020 Genesys Logic, Inc.
+ * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
+ *
+ * Copyright (C) 2020 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * Copyright (C) 2022 Genesys Logic, Inc.
+ * Authors: Jason Lai <jason.lai@genesyslogic.com.tw>
+ *
+ * Copyright (C) 2023 Genesys Logic, Inc.
+ * Authors: Victor Shih <victor.shih@genesyslogic.com.tw>
+ *
  * Support for SD UHS-II cards
  */
 #include <linux/err.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sd_uhs2.h>
 
+#include "card.h"
 #include "core.h"
 #include "bus.h"
 #include "sd.h"
+#include "sd_ops.h"
 #include "mmc_ops.h"
 
+#define UHS2_WAIT_CFG_COMPLETE_PERIOD_US  (1 * 1000) /* 1ms */
+#define UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS 100        /* 100ms */
+
 static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 };
 
+struct sd_uhs2_wait_active_state_data {
+	struct mmc_host *host;
+	struct mmc_command *cmd;
+};
+
 static int sd_uhs2_power_up(struct mmc_host *host)
 {
 	int err;
@@ -50,6 +78,43 @@  static int sd_uhs2_power_off(struct mmc_host *host)
 	return host->ops->uhs2_control(host, UHS2_SET_IOS);
 }
 
+/*
+ * sd_uhs2_cmd_assemble() - build up UHS-II command packet which is embedded in
+ *                          mmc_command structure
+ * @cmd:	MMC command to executed
+ * @uhs2_cmd:	UHS2 command corresponded to MMC command
+ * @header:	Header field of UHS-II command cxpacket
+ * @arg:	Argument field of UHS-II command packet
+ * @payload:	Payload field of UHS-II command packet
+ * @plen:	Payload length
+ * @resp:	Response buffer is allocated by caller and it is used to keep
+ *              the response of CM-TRAN command. For SD-TRAN command, uhs2_resp
+ *              should be null and SD-TRAN command response should be stored in
+ *              resp of mmc_command.
+ * @resp_len:	Response buffer length
+ *
+ * The uhs2_command structure contains message packets which are transmited/
+ * received on UHS-II bus. This function fills in the contents of uhs2_command
+ * structure and embededs UHS2 command into mmc_command structure, which is used
+ * in legacy SD operation functions.
+ *
+ */
+static void sd_uhs2_cmd_assemble(struct mmc_command *cmd,
+				 struct uhs2_command *uhs2_cmd,
+				 u16 header, u16 arg, __be32 *payload,
+				 u8 plen, u8 *resp, u8 resp_len)
+{
+	uhs2_cmd->header = header;
+	uhs2_cmd->arg = arg;
+	uhs2_cmd->payload = payload;
+	uhs2_cmd->payload_len = plen * sizeof(u32);
+	uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4;
+
+	cmd->uhs2_cmd = uhs2_cmd;
+	cmd->uhs2_resp = resp;
+	cmd->uhs2_resp_len = resp_len;
+}
+
 /*
  * Run the phy initialization sequence, which mainly relies on the UHS-II host
  * to check that we reach the expected electrical state, between the host and
@@ -57,7 +122,15 @@  static int sd_uhs2_power_off(struct mmc_host *host)
  */
 static int sd_uhs2_phy_init(struct mmc_host *host)
 {
-	return 0;
+	int err = 0;
+
+	err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
+	if (err) {
+		pr_err("%s: failed to initial phy for UHS-II!\n",
+		       mmc_hostname(host));
+	}
+
+	return err;
 }
 
 /*
@@ -66,6 +139,82 @@  static int sd_uhs2_phy_init(struct mmc_host *host)
  */
 static int sd_uhs2_dev_init(struct mmc_host *host)
 {
+	struct mmc_command cmd = {0};
+	struct uhs2_command uhs2_cmd = {};
+	u32 cnt;
+	u32 dap, gap, resp_gap;
+	u16 header, arg;
+	__be32 payload[UHS2_DEV_INIT_PAYLOAD_LEN];
+	u8 gd = 0;
+	u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
+	int err;
+
+	dap = host->uhs2_caps.dap;
+	gap = host->uhs2_caps.gap;
+
+	/*
+	 * Refer to UHS-II Addendum Version 1.02 Figure 6-21 to see DEVICE_INIT CCMD format.
+	 * Head:
+	 *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
+	 *      - IOADR = CMD_BASE + 002h
+	 * Payload:
+	 *      - bit [3:0]  : GAP(Group Allocated Power)
+	 *      - bit [7:4]  : GD(Group Descriptor)
+	 *      - bit [11]   : Complete Flag
+	 *      - bit [15:12]: DAP(Device Allocated Power)
+	 */
+	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
+	arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_WRITE |
+	       UHS2_NATIVE_CMD_PLEN_4B |
+	       (UHS2_DEV_CMD_DEVICE_INIT >> 8);
+
+	/*
+	 * Refer to UHS-II Addendum Version 1.02 section 6.3.1.
+	 * Max. time from DEVICE_INIT CCMD EOP reception on Device
+	 * Rx to its SOP transmission on Device Tx(Tfwd_init_cmd) is
+	 * 1 second.
+	 */
+	cmd.busy_timeout = 1000;
+
+	/*
+	 * Refer to UHS-II Addendum Version 1.02 section 6.2.6.3.
+	 * When the number of the DEVICE_INIT commands is reach to
+	 * 30 tiems, Host shall stop issuing DEVICE_INIT command
+	 * and regard it as an error.
+	 */
+	for (cnt = 0; cnt < 30; cnt++) {
+		payload[0] = ((dap & 0xF) << 12) |
+			      UHS2_DEV_INIT_COMPLETE_FLAG |
+			      ((gd & 0xF) << 4) |
+			      (gap & 0xF);
+
+		sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg,
+				     payload, UHS2_DEV_INIT_PAYLOAD_LEN,
+				     resp, UHS2_DEV_INIT_RESP_LEN);
+
+		err = mmc_wait_for_cmd(host, &cmd, 0);
+		if (err) {
+			pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+			       mmc_hostname(host), __func__, err);
+			return err;
+		}
+
+		if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) {
+			pr_err("%s: DEVICE_INIT response is wrong!\n",
+			       mmc_hostname(host));
+			return -EIO;
+		}
+
+		if (resp[5] & 0x8) {
+			host->uhs2_caps.group_desc = gd;
+			return 0;
+		}
+		resp_gap = resp[4] & 0x0F;
+		if (gap == resp_gap)
+			gd++;
+	}
+
 	return 0;
 }
 
@@ -76,6 +225,52 @@  static int sd_uhs2_dev_init(struct mmc_host *host)
  */
 static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
 {
+	struct mmc_command cmd = {0};
+	struct uhs2_command uhs2_cmd = {};
+	u16 header, arg;
+	__be32 payload[UHS2_DEV_ENUM_PAYLOAD_LEN];
+	u8 id_f = 0xF, id_l = 0x0;
+	u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
+	int err;
+
+	/*
+	 * Refer to UHS-II Addendum Version 1.02 Figure 6-28 to see ENUMERATE CCMD format.
+	 * Header:
+	 *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
+	 *      - IOADR = CMD_BASE + 003h
+	 * Payload:
+	 *      - bit [3:0]: ID_L(Last Node ID)
+	 *      - bit [7:4]: ID_F(First Node ID)
+	 */
+	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
+	arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_WRITE |
+	       UHS2_NATIVE_CMD_PLEN_4B |
+	       (UHS2_DEV_CMD_ENUMERATE >> 8);
+
+	payload[0] = (id_f << 4) | id_l;
+	payload[0] = cpu_to_be32(payload[0]);
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_DEV_ENUM_PAYLOAD_LEN,
+			     resp, UHS2_DEV_ENUM_RESP_LEN);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) {
+		pr_err("%s: ENUMERATE response is wrong!\n",
+		       mmc_hostname(host));
+		return -EIO;
+	}
+
+	id_f = (resp[4] >> 4) & 0xF;
+	id_l = resp[4] & 0xF;
+	*node_id = id_f;
+
 	return 0;
 }
 
@@ -86,6 +281,181 @@  static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
  */
 static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
 {
+	struct mmc_command cmd = {0};
+	struct uhs2_command uhs2_cmd = {};
+	u16 header, arg;
+	u32 cap;
+	int err;
+
+	/*
+	 * Use Control Read CCMD to read Generic Capability from Configuration Register.
+	 * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
+	 * - IOADR = Generic Capability Register(CFG_BASE + 000h)
+	 */
+	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
+	arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_READ |
+	       UHS2_NATIVE_CMD_PLEN_4B |
+	       (UHS2_DEV_CONFIG_GEN_CAPS >> 8);
+
+	/*
+	 * There is no payload because per spec, there should be
+	 * no payload field for read CCMD.
+	 * Plen is set in arg. Per spec, plen for read CCMD
+	 * represents the len of read data which is assigned in payload
+	 * of following RES (p136).
+	 */
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/*
+	 * Generic Capability Register:
+	 * bit [7:0]  : Reserved
+	 * bit [13:8] : Device-Specific Number of Lanes and Functionality
+	 *              bit 8: 2L-HD
+	 *              bit 9: 2D-1U FD
+	 *              bit 10: 1D-2U FD
+	 *              bit 11: 2D-2U FD
+	 *              Others: Reserved
+	 * bit [14]   : DADR Length
+	 *              0: 4 bytes
+	 *              1: Reserved
+	 * bit [23:16]: Application Type
+	 *              bit 16: 0=Non-SD memory, 1=SD memory
+	 *              bit 17: 0=Non-SDIO, 1=SDIO
+	 *              bit 18: 0=Card, 1=Embedded
+	 * bit [63:24]: Reserved
+	 */
+	cap = cmd.resp[0];
+	card->uhs2_config.n_lanes =
+				(cap >> UHS2_DEV_CONFIG_N_LANES_POS) &
+				UHS2_DEV_CONFIG_N_LANES_MASK;
+	card->uhs2_config.dadr_len =
+				(cap >> UHS2_DEV_CONFIG_DADR_POS) &
+				UHS2_DEV_CONFIG_DADR_MASK;
+	card->uhs2_config.app_type =
+				(cap >> UHS2_DEV_CONFIG_APP_POS) &
+				UHS2_DEV_CONFIG_APP_MASK;
+
+	/*
+	 * Use Control Read CCMD to read PHY Capability from Configuration Register.
+	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
+	 * - IOADR = PHY Capability Register(CFG_BASE + 002h)
+	 */
+	arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_READ |
+	       UHS2_NATIVE_CMD_PLEN_8B |
+	      (UHS2_DEV_CONFIG_PHY_CAPS >> 8);
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/*
+	 * PHY Capability Register:
+	 * bit [3:0]  : PHY Minor Revision
+	 * bit [5:4]  : PHY Major Revision
+	 * bit [15]   : Support Hibernate Mode
+	 *              0: Not support Hibernate Mode
+	 *              1: Support Hibernate Mode
+	 * bit [31:16]: Reserved
+	 * bit [35:32]: Device-Specific N_LSS_SYN
+	 * bit [39:36]: Device-Specific N_LSS_DIR
+	 * bit [63:40]: Reserved
+	 */
+	cap = cmd.resp[0];
+	card->uhs2_config.phy_minor_rev =
+				cap & UHS2_DEV_CONFIG_PHY_MINOR_MASK;
+	card->uhs2_config.phy_major_rev =
+				(cap >> UHS2_DEV_CONFIG_PHY_MAJOR_POS) &
+				 UHS2_DEV_CONFIG_PHY_MAJOR_MASK;
+	card->uhs2_config.can_hibernate =
+				(cap >> UHS2_DEV_CONFIG_CAN_HIBER_POS) &
+				 UHS2_DEV_CONFIG_CAN_HIBER_MASK;
+
+	cap = cmd.resp[1];
+	card->uhs2_config.n_lss_sync =
+				cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
+	card->uhs2_config.n_lss_dir =
+				(cap >> UHS2_DEV_CONFIG_N_LSS_DIR_POS) &
+				UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
+	if (card->uhs2_config.n_lss_sync == 0)
+		card->uhs2_config.n_lss_sync = 16 << 2;
+	else
+		card->uhs2_config.n_lss_sync <<= 2;
+
+	if (card->uhs2_config.n_lss_dir == 0)
+		card->uhs2_config.n_lss_dir = 16 << 3;
+	else
+		card->uhs2_config.n_lss_dir <<= 3;
+
+	/*
+	 * Use Control Read CCMD to read LINK/TRAN Capability from Configuration Register.
+	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
+	 * - IOADR = LINK/TRAN Capability Register(CFG_BASE + 004h)
+	 */
+	arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) |
+		UHS2_NATIVE_CMD_READ |
+		UHS2_NATIVE_CMD_PLEN_8B |
+		(UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8);
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/*
+	 * LINK/TRAN Capability Register:
+	 * bit [3:0]  : LINK_TRAN Minor Revision
+	 * bit [5:4]  : LINK/TRAN Major Revision
+	 * bit [7:6]  : Reserved
+	 * bit [15:8] : Device-Specific N_FCU
+	 * bit [18:16]: Device Type
+	 *              001b=Host
+	 *              010b=Device
+	 *              011b=Reserved for CMD issuable Device
+	 * bit [19]   : Reserved
+	 * bit [31:20]: Device-Specific MAX_BLKLEN
+	 * bit [39:32]: Device-Specific N_DATA_GAP
+	 * bit [63:40]: Reserved
+	 */
+	cap = cmd.resp[0];
+	card->uhs2_config.link_minor_rev =
+				cap & UHS2_DEV_CONFIG_LT_MINOR_MASK;
+	card->uhs2_config.link_major_rev =
+				(cap >> UHS2_DEV_CONFIG_LT_MAJOR_POS) &
+				UHS2_DEV_CONFIG_LT_MAJOR_MASK;
+	card->uhs2_config.n_fcu =
+				(cap >> UHS2_DEV_CONFIG_N_FCU_POS) &
+				UHS2_DEV_CONFIG_N_FCU_MASK;
+	card->uhs2_config.dev_type =
+				(cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) &
+				UHS2_DEV_CONFIG_DEV_TYPE_MASK;
+	card->uhs2_config.maxblk_len =
+				(cap >> UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) &
+				UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK;
+
+	cap = cmd.resp[1];
+	card->uhs2_config.n_data_gap =
+				cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK;
+	if (card->uhs2_config.n_fcu == 0)
+		card->uhs2_config.n_fcu = 256;
+
 	return 0;
 }
 
@@ -100,26 +470,357 @@  static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
  */
 static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card)
 {
+	struct mmc_command cmd = {0};
+	struct uhs2_command uhs2_cmd = {};
+	u16 header, arg;
+	__be32 payload[UHS2_CFG_WRITE_PAYLOAD_LEN];
+	u8 nMinDataGap;
+	int err;
+	u8 resp[5] = {0};
+
+	/*
+	 * Use Control Write CCMD to set Generic Setting in Configuration Register.
+	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
+	 * - IOADR = Generic Setting Register(CFG_BASE + 008h)
+	 * - Payload = New contents to be written to Generic Setting Register
+	 */
+	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
+	arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_WRITE |
+	       UHS2_NATIVE_CMD_PLEN_8B |
+	       (UHS2_DEV_CONFIG_GEN_SET >> 8);
+
+	/*
+	 * Most UHS-II cards only support FD and 2L-HD mode. Other lane numbers
+	 * defined in UHS-II addendem Ver1.01 are optional.
+	 */
+	host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
+	card->uhs2_config.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
+
+	payload[0] = card->uhs2_config.n_lanes_set << UHS2_DEV_CONFIG_N_LANES_POS;
+	payload[1] = 0;
+	payload[0] = cpu_to_be32(payload[0]);
+	payload[1] = cpu_to_be32(payload[1]);
+
+	/*
+	 * There is no payload because per spec, there should be
+	 * no payload field for read CCMD.
+	 * Plen is set in arg. Per spec, plen for read CCMD
+	 * represents the len of read data which is assigned in payload
+	 * of following RES (p136).
+	 */
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
+			     NULL, 0);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/*
+	 * Use Control Write CCMD to set PHY Setting in Configuration Register.
+	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
+	 * - IOADR = PHY Setting Register(CFG_BASE + 00Ah)
+	 * - Payload = New contents to be written to PHY Setting Register
+	 */
+	arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_WRITE |
+	       UHS2_NATIVE_CMD_PLEN_8B |
+	       (UHS2_DEV_CONFIG_PHY_SET >> 8);
+
+	if (host->uhs2_caps.speed_range == UHS2_DEV_CONFIG_PHY_SET_SPEED_B) {
+		if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
+		    host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
+			/* Support HD */
+			host->ios.timing = MMC_TIMING_UHS2_SPEED_B_HD;
+			nMinDataGap = 1;
+		} else {
+			/* Only support 2L-FD so far */
+			host->ios.timing = MMC_TIMING_UHS2_SPEED_B;
+			nMinDataGap = 3;
+		}
+		card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_B;
+	} else {
+		if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
+		    host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
+			/* Support HD */
+			host->ios.timing = MMC_TIMING_UHS2_SPEED_A_HD;
+			nMinDataGap = 1;
+		} else {
+			/* Only support 2L-FD so far */
+			host->ios.timing = MMC_TIMING_UHS2_SPEED_A;
+			nMinDataGap = 3;
+		}
+		card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_A;
+	}
+
+	payload[0] = card->uhs2_config.speed_range_set << UHS2_DEV_CONFIG_PHY_SET_SPEED_POS;
+
+	card->uhs2_config.n_lss_sync_set = (max(card->uhs2_config.n_lss_sync,
+						host->uhs2_caps.n_lss_sync) >> 2) &
+					   UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
+	host->uhs2_caps.n_lss_sync_set = card->uhs2_config.n_lss_sync_set;
+
+	card->uhs2_config.n_lss_dir_set = (max(card->uhs2_config.n_lss_dir,
+					       host->uhs2_caps.n_lss_dir) >> 3) &
+					  UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
+	host->uhs2_caps.n_lss_dir_set = card->uhs2_config.n_lss_dir_set;
+
+	payload[1] = (card->uhs2_config.n_lss_dir_set << UHS2_DEV_CONFIG_N_LSS_DIR_POS) |
+		     card->uhs2_config.n_lss_sync_set;
+	payload[0] = cpu_to_be32(payload[0]);
+	payload[1] = cpu_to_be32(payload[1]);
+
+	memset(resp, 0, sizeof(resp));
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
+			     resp, UHS2_CFG_WRITE_PHY_SET_RESP_LEN);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	if ((resp[2] & 0x80)) {
+		pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n",
+		       mmc_hostname(host), __func__, resp[2]);
+		return -EIO;
+	}
+
+	/*
+	 * Use Control Write CCMD to set LINK/TRAN Setting in Configuration Register.
+	 * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
+	 * - IOADR = LINK/TRAN Setting Register(CFG_BASE + 00Ch)
+	 * - Payload = New contents to be written to LINK/TRAN Setting Register
+	 */
+	arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) |
+		UHS2_NATIVE_CMD_WRITE |
+		UHS2_NATIVE_CMD_PLEN_8B |
+		(UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8);
+
+	if (card->uhs2_config.app_type == UHS2_DEV_CONFIG_APP_SD_MEM)
+		card->uhs2_config.maxblk_len_set = UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN;
+	else
+		card->uhs2_config.maxblk_len_set = min(card->uhs2_config.maxblk_len,
+						       host->uhs2_caps.maxblk_len);
+	host->uhs2_caps.maxblk_len_set = card->uhs2_config.maxblk_len_set;
+
+	card->uhs2_config.n_fcu_set = min(card->uhs2_config.n_fcu, host->uhs2_caps.n_fcu);
+	host->uhs2_caps.n_fcu_set = card->uhs2_config.n_fcu_set;
+
+	card->uhs2_config.n_data_gap_set = max(nMinDataGap, card->uhs2_config.n_data_gap);
+	host->uhs2_caps.n_data_gap_set = card->uhs2_config.n_data_gap_set;
+
+	host->uhs2_caps.max_retry_set = 3;
+	card->uhs2_config.max_retry_set = host->uhs2_caps.max_retry_set;
+
+	payload[0] = (card->uhs2_config.maxblk_len_set << UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) |
+		     (card->uhs2_config.max_retry_set << UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) |
+		     (card->uhs2_config.n_fcu_set << UHS2_DEV_CONFIG_N_FCU_POS);
+	payload[1] = card->uhs2_config.n_data_gap_set;
+	payload[0] = cpu_to_be32(payload[0]);
+	payload[1] = cpu_to_be32(payload[1]);
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
+			     NULL, 0);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/*
+	 * Use Control Write CCMD to set Config Completion(payload bit 63) in Generic Setting
+	 * Register.
+	 * Header:
+	 *      - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
+	 *      - IOADR = PGeneric Setting Register(CFG_BASE + 008h)
+	 * Payload:
+	 *      - bit [63]: Config Completion
+	 *
+	 * DLSM transits to Active state immediately when Config Completion is set to 1.
+	 */
+	arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
+	       UHS2_NATIVE_CMD_WRITE |
+	       UHS2_NATIVE_CMD_PLEN_8B |
+	       (UHS2_DEV_CONFIG_GEN_SET >> 8);
+
+	payload[0] = 0;
+	payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE;
+	payload[0] = cpu_to_be32(payload[0]);
+	payload[1] = cpu_to_be32(payload[1]);
+
+	memset(resp, 0, sizeof(resp));
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
+			     resp, UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/* Set host Config Setting registers */
+	err = host->ops->uhs2_control(host, UHS2_SET_CONFIG);
+	if (err) {
+		pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__);
+		return err;
+	}
+
+	return 0;
+}
+
+static int sd_uhs2_go_dormant(struct mmc_host *host, u32 node_id)
+{
+	struct mmc_command cmd = {0};
+	struct uhs2_command uhs2_cmd = {};
+	u16 header, arg;
+	__be32 payload[1];
+	int err;
+
+	/* Disable Normal INT */
+	err = host->ops->uhs2_control(host, UHS2_DISABLE_INT);
+	if (err) {
+		pr_err("%s: %s: UHS2 DISABLE_INT fail!\n",
+		       mmc_hostname(host), __func__);
+		return err;
+	}
+
+	/*
+	 * Refer to UHS-II Addendum Version 1.02 Figure 6-17 to see GO_DORMANT_STATE CCMD format.
+	 * Header:
+	 *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
+	 *      - IOADR = CMD_BASE + 001h
+	 * Payload:
+	 *      - bit [7]: HBR(Entry to Hibernate Mode)
+	 *                 1: Host intends to enter Hibernate mode during Dormant state.
+	 *                 The default setting is 0 because hibernate is currently not supported.
+	 */
+	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
+	arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) |
+		UHS2_NATIVE_CMD_WRITE |
+		UHS2_NATIVE_CMD_PLEN_4B |
+		(UHS2_DEV_CMD_GO_DORMANT_STATE >> 8);
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_GO_DORMANT_PAYLOAD_LEN,
+			     NULL, 0);
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err) {
+		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/* Check Dormant State in Present */
+	err = host->ops->uhs2_control(host, UHS2_CHECK_DORMANT);
+	if (err)
+		return err;
+
+	/* Disable UHS2 card clock */
+	err = host->ops->uhs2_control(host, UHS2_DISABLE_CLK);
+	if (err)
+		return err;
+
+	/* Restore sd clock */
+	mmc_delay(5);
+	err = host->ops->uhs2_control(host, UHS2_ENABLE_CLK);
+	if (err)
+		return err;
+
+	/* Enable Normal INT */
+	err = host->ops->uhs2_control(host, UHS2_ENABLE_INT);
+	if (err)
+		return err;
+
+	/* Detect UHS2 */
+	err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
+	if (err)
+		return err;
+
 	return 0;
 }
 
-/*
- * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
- * commands/requests to be backwards compatible through the legacy SD protocol.
- * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
- * be set through a legacy CMD6. Note that, the power limit that becomes set,
- * survives a soft reset through the GO_DORMANT_STATE command.
- */
-static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
+static int __sd_uhs2_wait_active_state_cb(void *cb_data, bool *busy)
 {
+	struct sd_uhs2_wait_active_state_data *data = cb_data;
+	struct mmc_host *host = data->host;
+	struct mmc_command *cmd = data->cmd;
+	int err;
+
+	err = mmc_wait_for_cmd(host, cmd, 0);
+	if (err)
+		return err;
+
+	if (cmd->resp[1] & UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE)
+		*busy = false;
+	else
+		*busy = true;
+
 	return 0;
 }
 
+static int sd_uhs2_go_dormant_state(struct mmc_host *host, u32 node_id)
+{
+	struct mmc_command cmd = {0};
+	struct uhs2_command uhs2_cmd = {};
+	u16 header, arg;
+	int err;
+	struct sd_uhs2_wait_active_state_data cb_data = {
+		.host = host,
+		.cmd = &cmd
+	};
+
+	err = sd_uhs2_go_dormant(host, node_id);
+	if (err) {
+		pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n",
+		       mmc_hostname(host), __func__, err);
+		return err;
+	}
+
+	/*
+	 * Use Control Read CCMD to check Config Completion(bit 63) in Generic Setting Register.
+	 * - Control Read(R/W=0) with 8-Byte payload(PLEN=10b).
+	 * - IOADR = Generic Setting Register(CFG_BASE + 008h)
+	 *
+	 * When UHS-II card been switched to new speed mode, it will set Config Completion to 1.
+	 */
+	header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
+	arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
+		UHS2_NATIVE_CMD_READ |
+		UHS2_NATIVE_CMD_PLEN_8B |
+		(UHS2_DEV_CONFIG_GEN_SET >> 8);
+
+	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
+	err = __mmc_poll_for_busy(host, UHS2_WAIT_CFG_COMPLETE_PERIOD_US,
+				  UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS,
+				  &__sd_uhs2_wait_active_state_cb, &cb_data);
+	if (err) {
+		pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__);
+		return err;
+	}
+
+	return 0;
+}
+
+static void sd_uhs2_remove(struct mmc_host *host)
+{
+	mmc_remove_card(host->card);
+	host->card = NULL;
+}
+
 /*
  * Allocate the data structure for the mmc_card and run the UHS-II specific
  * initialization sequence.
  */
-static int sd_uhs2_init_card(struct mmc_host *host)
+static int sd_uhs2_init_card(struct mmc_host *host, struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
 	u32 node_id;
@@ -133,9 +834,14 @@  static int sd_uhs2_init_card(struct mmc_host *host)
 	if (err)
 		return err;
 
-	card = mmc_alloc_card(host, &sd_type);
-	if (IS_ERR(card))
-		return PTR_ERR(card);
+	if (oldcard) {
+		card = oldcard;
+	} else {
+		card = mmc_alloc_card(host, &sd_type);
+		if (IS_ERR(card))
+			return PTR_ERR(card);
+	}
+	host->card = card;
 
 	card->uhs2_config.node_id = node_id;
 	card->type = MMC_TYPE_SD;
@@ -148,18 +854,226 @@  static int sd_uhs2_init_card(struct mmc_host *host)
 	if (err)
 		goto err;
 
-	host->card = card;
+	/* If change speed to Range B, need to GO_DORMANT_STATE */
+	if (host->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
+	    host->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) {
+		err = sd_uhs2_go_dormant_state(host, node_id);
+		if (err)
+			return err;
+	}
+
+	host->flags |= MMC_UHS2_SD_TRAN;
+
 	return 0;
 
 err:
-	mmc_remove_card(card);
+	sd_uhs2_remove(host);
 	return err;
 }
 
-static void sd_uhs2_remove(struct mmc_host *host)
+int sd_uhs2_reinit(struct mmc_host *host)
 {
-	mmc_remove_card(host->card);
-	host->card = NULL;
+	struct mmc_card *card = host->card;
+	int err;
+
+	sd_uhs2_power_up(host);
+	err = sd_uhs2_phy_init(host);
+	if (err)
+		return err;
+
+	err = sd_uhs2_init_card(host, card);
+	if (err)
+		return err;
+
+	mmc_card_set_present(card);
+	return err;
+}
+
+/*
+ * Mask off any voltages we don't support and select
+ * the lowest voltage
+ */
+u32 sd_uhs2_select_voltage(struct mmc_host *host, u32 ocr)
+{
+	int bit;
+	int err;
+
+	/*
+	 * Sanity check the voltages that the card claims to
+	 * support.
+	 */
+	if (ocr & 0x7F) {
+		dev_warn(mmc_dev(host), "card claims to support voltages below defined range\n");
+		ocr &= ~0x7F;
+	}
+
+	ocr &= host->ocr_avail;
+	if (!ocr) {
+		dev_warn(mmc_dev(host), "no support for card's volts\n");
+		return 0;
+	}
+
+	if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
+		bit = ffs(ocr) - 1;
+		ocr &= 3 << bit;
+		/* Power cycle */
+		err = sd_uhs2_power_off(host);
+		if (err)
+			return 0;
+		err = sd_uhs2_reinit(host);
+		if (err)
+			return 0;
+	} else {
+		bit = fls(ocr) - 1;
+		ocr &= 3 << bit;
+		if (bit != host->ios.vdd)
+			dev_warn(mmc_dev(host), "exceeding card's volts\n");
+	}
+
+	return ocr;
+}
+
+/*
+ * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
+ * commands/requests to be backwards compatible through the legacy SD protocol.
+ * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
+ * be set through a legacy CMD6. Note that, the power limit that becomes set,
+ * survives a soft reset through the GO_DORMANT_STATE command.
+ */
+static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
+{
+	int err;
+	u32 cid[4];
+	u32 ocr;
+	u32 rocr;
+	u8  *status;
+	int ro;
+
+	/* Send CMD0 to reset SD card */
+	err = __mmc_go_idle(host);
+	if (err)
+		return err;
+
+	mmc_delay(1);
+
+	/* Send CMD8 to communicate SD interface operation condition */
+	err = mmc_send_if_cond(host, host->ocr_avail);
+	if (err) {
+		dev_warn(mmc_dev(host), "CMD8 error\n");
+		goto err;
+	}
+
+	/*
+	 * Probe SD card working voltage.
+	 */
+	err = mmc_send_app_op_cond(host, 0, &ocr);
+	if (err)
+		goto err;
+
+	card->ocr = ocr;
+
+	/*
+	 * Some SD cards claims an out of spec VDD voltage range. Let's treat
+	 * these bits as being in-valid and especially also bit7.
+	 */
+	ocr &= ~0x7FFF;
+	rocr = sd_uhs2_select_voltage(host, ocr);
+	/*
+	 * Some cards have zero value of rocr in UHS-II mode. Assign host's
+	 * ocr value to rocr.
+	 */
+	if (!rocr)
+		rocr = host->ocr_avail;
+
+	rocr |= (SD_OCR_CCS | SD_OCR_XPC);
+
+	/* Wait SD power on ready */
+	ocr = rocr;
+
+	err = mmc_send_app_op_cond(host, ocr, &rocr);
+	if (err)
+		goto err;
+
+	err = mmc_send_cid(host, cid);
+	if (err)
+		goto err;
+
+	memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
+	mmc_decode_cid(card);
+
+	/*
+	 * For native busses:  get card RCA and quit open drain mode.
+	 */
+	err = mmc_send_relative_addr(host, &card->rca);
+	if (err)
+		goto err;
+
+	err = mmc_sd_get_csd(card);
+	if (err)
+		goto err;
+
+	/*
+	 * Select card, as all following commands rely on that.
+	 */
+	err = mmc_select_card(card);
+	if (err)
+		goto err;
+
+	/*
+	 * Fetch SCR from card.
+	 */
+	err = mmc_app_send_scr(card);
+	if (err)
+		goto err;
+
+	err = mmc_decode_scr(card);
+	if (err)
+		goto err;
+
+	/*
+	 * Switch to high power consumption mode.
+	 * Even switch failed, sd card can still work at lower power consumption mode, but
+	 * performance will be lower than high power consumption mode.
+	 */
+	status = kmalloc(64, GFP_KERNEL);
+	if (!status)
+		return -ENOMEM;
+
+	if (!(card->csd.cmdclass & CCC_SWITCH)) {
+		pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
+			mmc_hostname(card->host));
+	} else {
+		/* send CMD6 to set Maximum Power Consumption to get better performance */
+		err = mmc_sd_switch(card, 0, 3, SD4_SET_POWER_LIMIT_1_80W, status);
+		if (!err)
+			err = mmc_sd_switch(card, 1, 3, SD4_SET_POWER_LIMIT_1_80W, status);
+
+		err = 0;
+	}
+
+	/*
+	 * Check if read-only switch is active.
+	 */
+	ro = mmc_sd_get_ro(host);
+	if (ro < 0) {
+		pr_warn("%s: host does not support read-only switch, assuming write-enable\n",
+			mmc_hostname(host));
+	} else if (ro > 0) {
+		mmc_card_set_readonly(card);
+	}
+
+	/*
+	 * NOTE:
+	 * Should we read Externsion Register to check power notification feature here?
+	 */
+
+	kfree(status);
+
+	return 0;
+
+err:
+	sd_uhs2_remove(host);
+	return err;
 }
 
 static int sd_uhs2_alive(struct mmc_host *host)
@@ -181,38 +1095,181 @@  static void sd_uhs2_detect(struct mmc_host *host)
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
 		sd_uhs2_power_off(host);
+		host->flags &= ~MMC_UHS2_SUPPORT;
 		mmc_release_host(host);
 	}
 }
 
+static int _sd_uhs2_suspend(struct mmc_host *host)
+{
+	struct mmc_card *card = host->card;
+	int err = 0;
+
+	mmc_claim_host(host);
+
+	if (mmc_card_suspended(card))
+		goto out;
+
+	if (mmc_sd_can_poweroff_notify(card))
+		err = sd_poweroff_notify(card);
+
+	if (!err) {
+		sd_uhs2_power_off(host);
+		mmc_card_set_suspended(card);
+	}
+
+out:
+	mmc_release_host(host);
+	return err;
+}
+
+/*
+ * Callback for suspend
+ */
 static int sd_uhs2_suspend(struct mmc_host *host)
 {
-	return 0;
+	int err;
+
+	err = _sd_uhs2_suspend(host);
+	if (!err) {
+		pm_runtime_disable(&host->card->dev);
+		pm_runtime_set_suspended(&host->card->dev);
+	}
+
+	return err;
 }
 
+/*
+ * This function tries to determine if the same card is still present
+ * and, if so, restore all state to it.
+ */
+static int _mmc_sd_uhs2_resume(struct mmc_host *host)
+{
+	int err = 0;
+
+	mmc_claim_host(host);
+
+	if (!mmc_card_suspended(host->card))
+		goto out;
+
+	/* Power up UHS2 SD card and re-initialize it. */
+	err = sd_uhs2_reinit(host);
+	mmc_card_clr_suspended(host->card);
+
+out:
+	mmc_release_host(host);
+	return err;
+}
+
+/*
+ * Callback for resume
+ */
 static int sd_uhs2_resume(struct mmc_host *host)
 {
+	pm_runtime_enable(&host->card->dev);
 	return 0;
 }
 
+/*
+ * Callback for runtime_suspend.
+ */
 static int sd_uhs2_runtime_suspend(struct mmc_host *host)
 {
-	return 0;
+	int err;
+
+	if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
+		return 0;
+
+	err = _sd_uhs2_suspend(host);
+	if (err)
+		pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err);
+
+	return err;
 }
 
 static int sd_uhs2_runtime_resume(struct mmc_host *host)
 {
-	return 0;
+	int err;
+
+	err = _mmc_sd_uhs2_resume(host);
+	if (err && err != -ENOMEDIUM)
+		pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err);
+
+	return err;
 }
 
-static int sd_uhs2_shutdown(struct mmc_host *host)
+static int sd_uhs2_hw_reset(struct mmc_host *host)
 {
-	return 0;
+	int err;
+
+	sd_uhs2_power_off(host);
+	/* Wait at least 1 ms according to SD spec */
+	mmc_delay(1);
+	sd_uhs2_power_up(host);
+
+	err = sd_uhs2_reinit(host);
+
+	return err;
 }
 
-static int sd_uhs2_hw_reset(struct mmc_host *host)
+/*
+ * mmc_uhs2_prepare_cmd - prepare for SD command packet
+ * @host:	MMC host
+ * @mrq:	MMC request
+ *
+ * Initialize and fill in a header and a payload of SD command packet.
+ * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
+ * advance.
+ *
+ * Return:	0 on success, non-zero error on failure
+ */
+void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
 {
-	return 0;
+	struct mmc_command *cmd;
+	struct uhs2_command *uhs2_cmd;
+	u16 header, arg;
+	__be32 *payload;
+	u8 plen;
+
+	cmd = mrq->cmd;
+	header = host->card->uhs2_config.node_id;
+	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
+		header |= UHS2_PACKET_TYPE_DCMD;
+	else
+		header |= UHS2_PACKET_TYPE_CCMD;
+
+	arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
+	if (host->uhs2_app_cmd) {
+		arg |= UHS2_SD_CMD_APP;
+		host->uhs2_app_cmd = false;
+	}
+
+	uhs2_cmd = cmd->uhs2_cmd;
+	payload = uhs2_cmd->payload;
+	plen = 2; /* at the maximum */
+
+	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
+	    !cmd->uhs2_tmode0_flag) {
+		if (mmc_card_uhs2_hd_mode(host))
+			arg |= UHS2_DCMD_2L_HD_MODE;
+
+		arg |= UHS2_DCMD_LM_TLEN_EXIST;
+
+		if (cmd->data->blocks == 1 &&
+		    cmd->data->blksz != 512 &&
+		    cmd->opcode != MMC_READ_SINGLE_BLOCK &&
+		    cmd->opcode != MMC_WRITE_BLOCK) {
+			arg |= UHS2_DCMD_TLUM_BYTE_MODE;
+			payload[1] = cpu_to_be32(cmd->data->blksz);
+		} else {
+			payload[1] = cpu_to_be32(cmd->data->blocks);
+		}
+	} else {
+		plen = 1;
+	}
+
+	payload[0] = cpu_to_be32(cmd->arg);
+	sd_uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
 }
 
 static const struct mmc_bus_ops sd_uhs2_ops = {
@@ -223,7 +1280,7 @@  static const struct mmc_bus_ops sd_uhs2_ops = {
 	.resume = sd_uhs2_resume,
 	.runtime_suspend = sd_uhs2_runtime_suspend,
 	.runtime_resume = sd_uhs2_runtime_resume,
-	.shutdown = sd_uhs2_shutdown,
+	.shutdown = sd_uhs2_suspend,
 	.hw_reset = sd_uhs2_hw_reset,
 };
 
@@ -231,6 +1288,8 @@  static int sd_uhs2_attach(struct mmc_host *host)
 {
 	int err;
 
+	host->flags |= MMC_UHS2_SUPPORT;
+
 	err = sd_uhs2_power_up(host);
 	if (err)
 		goto err;
@@ -239,7 +1298,7 @@  static int sd_uhs2_attach(struct mmc_host *host)
 	if (err)
 		goto err;
 
-	err = sd_uhs2_init_card(host);
+	err = sd_uhs2_init_card(host, NULL);
 	if (err)
 		goto err;
 
@@ -256,21 +1315,32 @@  static int sd_uhs2_attach(struct mmc_host *host)
 		goto remove_card;
 
 	mmc_claim_host(host);
+
 	return 0;
 
 remove_card:
-	mmc_remove_card(host->card);
-	host->card = NULL;
+	sd_uhs2_remove(host);
 	mmc_claim_host(host);
-	mmc_detach_bus(host);
+
 err:
+	mmc_detach_bus(host);
 	sd_uhs2_power_off(host);
+	host->flags &= ~MMC_UHS2_SUPPORT;
 	return err;
 }
 
+/**
+ * mmc_attach_sd_uhs2 - select UHS2 interface
+ * @host: MMC host
+ *
+ * Try to select UHS2 interface and initialize the bus for a given
+ * frequency, @freq.
+ *
+ * Return:	0 on success, non-zero error on failure
+ */
 int mmc_attach_sd_uhs2(struct mmc_host *host)
 {
-	int i, err = 0;
+	int i, err;
 
 	if (!(host->caps2 & MMC_CAP2_SD_UHS2))
 		return -EOPNOTSUPP;
@@ -285,6 +1355,9 @@  int mmc_attach_sd_uhs2(struct mmc_host *host)
 	 */
 	for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) {
 		host->f_init = sd_uhs2_freqs[i];
+		pr_info("%s: %s: trying to init UHS-II card at %u Hz\n",
+			mmc_hostname(host), __func__, host->f_init);
+
 		err = sd_uhs2_attach(host);
 		if (!err)
 			break;