From patchwork Fri Sep 15 09:43:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Victor Shih X-Patchwork-Id: 13386757 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EFA2AEE644B for ; Fri, 15 Sep 2023 09:49:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233818AbjIOJtT (ORCPT ); Fri, 15 Sep 2023 05:49:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46426 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233977AbjIOJtQ (ORCPT ); Fri, 15 Sep 2023 05:49:16 -0400 Received: from mail-pf1-x431.google.com (mail-pf1-x431.google.com [IPv6:2607:f8b0:4864:20::431]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 731CA3C1B; Fri, 15 Sep 2023 02:45:03 -0700 (PDT) Received: by mail-pf1-x431.google.com with SMTP id d2e1a72fcca58-690471b5889so376435b3a.0; Fri, 15 Sep 2023 02:45:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1694771102; x=1695375902; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=jeXZC0p6a2zacHZdWn4KhoIRbFETy/UA9GlSz96l+OA=; b=AKZR7MsPwaI+scyvODIG28HufTKoH3z8tcMv0ejgH46BFbxegxHmlI3NSrMEjZb4V6 irKmJQAgTZJx3xWQRJoyh/0IMWPto1OWJDC6Nc79kFE7lmgF/EAWGZHnT3EgcjdV/mWF 2UI/RNHcaLJXcpRpxPDzuHRoPPglGeMp/ujXxArqI+udd6yfzV2Zl2bilW0htefppn7t ggoYxQrX75PtPeV4mzhTQl8kakHYWEdIye4hnCSHQBBnHTQpZnVdGEhOo0aYL1AHujpj hiIOqrEtY1LiWQGwQp00f1+Dokgz1nRArjtSFcMSwQ8DxZloexJ+yE/kbM1/K2rJGzis ddPg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1694771102; x=1695375902; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=jeXZC0p6a2zacHZdWn4KhoIRbFETy/UA9GlSz96l+OA=; b=w4P/bgqzrUd6PaSZej0TMbTWZCcGY96t8UN+fdYGrjiDhN4g+yQchSI5YM+HgMejTv A9n8HtFMNaDSJvw6Yag4EEo8viLx8q7lT/PqD/RQnelq4BelvcmM5KcufEFTTjKIDzZc fPkkxEhLAYF3nw/GegAi+k/KrjQxYLYsTkz21Rx1gkQODDtVrE9TQrUMSzzaMrYvPM3K qsgHDN0xTD8+bJJGcIkoyNELQuUrsn8miCkEx21obPfBl1hpzxXEalNfGf+Fb3jXxmSn fzGjVo5/Gm+7rAit/GY1NjCN9J9gXbsXuaOM7dj/kROf7srSKyisVRJPWC0NsYRaUmdE npLg== X-Gm-Message-State: AOJu0YxHiGj8vctlp5t6DH0Xzm20P7IGWzhRs9VCAgyb+2mUKVY/lHD2 rQOaIXiS4nau9/2B2jbZPRs= X-Google-Smtp-Source: AGHT+IFM2QdGj1CEEcmLn9FCyEVQTvO6quKNCBXsB5RizmoMiQ3Ohyv62m1FwEF6c9WMQ+1bs97BJg== X-Received: by 2002:a05:6a20:549f:b0:135:4df7:f165 with SMTP id i31-20020a056a20549f00b001354df7f165mr1259416pzk.21.1694771102388; Fri, 15 Sep 2023 02:45:02 -0700 (PDT) Received: from localhost.localdomain (2001-b400-e2a6-6d77-d32f-f490-6688-3d32.emome-ip6.hinet.net. [2001:b400:e2a6:6d77:d32f:f490:6688:3d32]) by smtp.gmail.com with ESMTPSA id x4-20020a17090a530400b0025023726fc4sm4432794pjh.26.2023.09.15.02.44.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 15 Sep 2023 02:45:02 -0700 (PDT) From: Victor Shih To: ulf.hansson@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org, dlunev@chromium.org, Victor Shih , Ben Chuang , Victor Shih Subject: [PATCH V12 23/23] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Date: Fri, 15 Sep 2023 17:43:51 +0800 Message-Id: <20230915094351.11120-24-victorshihgli@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230915094351.11120-1-victorshihgli@gmail.com> References: <20230915094351.11120-1-victorshihgli@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Victor Shih Changes are: * Disable GL9755 overcurrent interrupt when power on/off on UHS-II. * Enable the internal clock when do reset on UHS-II mode. * Increase timeout value before detecting UHS-II interface. * Add vendor settings fro UHS-II mode. Signed-off-by: Ben Chuang Signed-off-by: AKASHI Takahiro Signed-off-by: Victor Shih Acked-by: Adrian Hunter --- Updates in V9: - Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). - Rename gl9755_uhs2_reset_sd_tran() to sdhci_gli_uhs2_reset_sd_tran(). Updates in V8: - Use sdhci_get_vdd_value() to simplify code in gl9755_set_power(). - Use read_poll_timeout_atomic() to simplify code in sdhci_wait_clock_stable(). - Use read_poll_timeout_atomic() to simplify code in sdhci_gl9755_reset(). Updates in V7: - Drop using gl9755_post_attach_sd(). --- drivers/mmc/host/sdhci-pci-gli.c | 233 ++++++++++++++++++++++++++++++- 1 file changed, 232 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index d83261e857a5..0802eca1e83d 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -18,6 +18,7 @@ #include "sdhci-cqhci.h" #include "sdhci-pci.h" #include "cqhci.h" +#include "sdhci-uhs2.h" /* Genesys Logic extra registers */ #define SDHCI_GLI_9750_WT 0x800 @@ -142,9 +143,36 @@ #define PCI_GLI_9755_PLLSSC 0x68 #define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0) +#define PCI_GLI_9755_PLLSSC_RTL BIT(24) +#define GLI_9755_PLLSSC_RTL_VALUE 0x1 +#define PCI_GLI_9755_PLLSSC_TRANS_PASS BIT(27) +#define GLI_9755_PLLSSC_TRANS_PASS_VALUE 0x1 +#define PCI_GLI_9755_PLLSSC_RECV GENMASK(29, 28) +#define GLI_9755_PLLSSC_RECV_VALUE 0x3 +#define PCI_GLI_9755_PLLSSC_TRAN GENMASK(31, 30) +#define GLI_9755_PLLSSC_TRAN_VALUE 0x3 + +#define PCI_GLI_9755_UHS2_PLL 0x6C +#define PCI_GLI_9755_UHS2_PLL_SSC GENMASK(9, 8) +#define GLI_9755_UHS2_PLL_SSC_VALUE 0x0 +#define PCI_GLI_9755_UHS2_PLL_DELAY BIT(18) +#define GLI_9755_UHS2_PLL_DELAY_VALUE 0x1 +#define PCI_GLI_9755_UHS2_PLL_PDRST BIT(27) +#define GLI_9755_UHS2_PLL_PDRST_VALUE 0x1 #define PCI_GLI_9755_SerDes 0x70 +#define PCI_GLI_9755_UHS2_SERDES_INTR GENMASK(2, 0) +#define GLI_9755_UHS2_SERDES_INTR_VALUE 0x3 +#define PCI_GLI_9755_UHS2_SERDES_ZC1 BIT(3) +#define GLI_9755_UHS2_SERDES_ZC1_VALUE 0x0 +#define PCI_GLI_9755_UHS2_SERDES_ZC2 GENMASK(7, 4) +#define GLI_9755_UHS2_SERDES_ZC2_DEFAULT 0xB +#define GLI_9755_UHS2_SERDES_ZC2_SANDISK 0x0 #define PCI_GLI_9755_SCP_DIS BIT(19) +#define PCI_GLI_9755_UHS2_SERDES_TRAN GENMASK(27, 24) +#define GLI_9755_UHS2_SERDES_TRAN_VALUE 0xC +#define PCI_GLI_9755_UHS2_SERDES_RECV GENMASK(31, 28) +#define GLI_9755_UHS2_SERDES_RECV_VALUE 0xF #define PCI_GLI_9755_MISC 0x78 #define PCI_GLI_9755_MISC_SSC_OFF BIT(26) @@ -773,6 +801,201 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot) gl9755_wt_off(pdev); } +static void gl9755_vendor_init(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct pci_dev *pdev = slot->chip->pdev; + u32 serdes; + u32 pllssc; + u32 uhs2_pll; + + gl9755_wt_on(pdev); + + pci_read_config_dword(pdev, PCI_GLI_9755_SerDes, &serdes); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_TRAN; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_TRAN, + GLI_9755_UHS2_SERDES_TRAN_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_RECV; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_RECV, + GLI_9755_UHS2_SERDES_RECV_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_INTR; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_INTR, + GLI_9755_UHS2_SERDES_INTR_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC1; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC1, + GLI_9755_UHS2_SERDES_ZC1_VALUE); + serdes &= ~PCI_GLI_9755_UHS2_SERDES_ZC2; + serdes |= FIELD_PREP(PCI_GLI_9755_UHS2_SERDES_ZC2, + GLI_9755_UHS2_SERDES_ZC2_DEFAULT); + pci_write_config_dword(pdev, PCI_GLI_9755_SerDes, serdes); + + pci_read_config_dword(pdev, PCI_GLI_9755_UHS2_PLL, &uhs2_pll); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_SSC; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_SSC, + GLI_9755_UHS2_PLL_SSC_VALUE); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_DELAY; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_DELAY, + GLI_9755_UHS2_PLL_DELAY_VALUE); + uhs2_pll &= ~PCI_GLI_9755_UHS2_PLL_PDRST; + uhs2_pll |= FIELD_PREP(PCI_GLI_9755_UHS2_PLL_PDRST, + GLI_9755_UHS2_PLL_PDRST_VALUE); + pci_write_config_dword(pdev, PCI_GLI_9755_UHS2_PLL, uhs2_pll); + + pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &pllssc); + pllssc &= ~PCI_GLI_9755_PLLSSC_RTL; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_RTL, + GLI_9755_PLLSSC_RTL_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_TRANS_PASS; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_TRANS_PASS, + GLI_9755_PLLSSC_TRANS_PASS_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_RECV; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_RECV, + GLI_9755_PLLSSC_RECV_VALUE); + pllssc &= ~PCI_GLI_9755_PLLSSC_TRAN; + pllssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_TRAN, + GLI_9755_PLLSSC_TRAN_VALUE); + pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, pllssc); + + gl9755_wt_off(pdev); +} + +static void sdhci_gli_pre_detect_init(struct sdhci_host *host) +{ + /* Need more time on UHS2 detect flow */ + sdhci_writeb(host, 0xA7, SDHCI_UHS2_TIMER_CTRL); +} + +static void gl9755_overcurrent_event_enable(struct sdhci_host *host, + bool enable) +{ + u32 mask; + + mask = sdhci_readl(host, SDHCI_SIGNAL_ENABLE); + if (enable) + mask |= SDHCI_INT_BUS_POWER; + else + mask &= ~SDHCI_INT_BUS_POWER; + + sdhci_writel(host, mask, SDHCI_SIGNAL_ENABLE); + + mask = sdhci_readl(host, SDHCI_INT_ENABLE); + if (enable) + mask |= SDHCI_INT_BUS_POWER; + else + mask &= ~SDHCI_INT_BUS_POWER; + + sdhci_writel(host, mask, SDHCI_INT_ENABLE); +} + +static void gl9755_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + u8 pwr = 0; + + if (mode != MMC_POWER_OFF) { + pwr = sdhci_get_vdd_value(vdd); + if (!pwr) + WARN(1, "%s: Invalid vdd %#x\n", mmc_hostname(host->mmc), vdd); + pwr |= SDHCI_VDD2_POWER_180; + } + + if (host->pwr == pwr) + return; + + host->pwr = pwr; + + if (pwr == 0) { + gl9755_overcurrent_event_enable(host, false); + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + } else { + gl9755_overcurrent_event_enable(host, false); + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + pwr |= (SDHCI_POWER_ON | SDHCI_VDD2_POWER_ON); + + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL); + /* wait stable */ + mdelay(5); + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + /* wait stable */ + mdelay(5); + gl9755_overcurrent_event_enable(host, true); + } +} + +static bool sdhci_wait_clock_stable(struct sdhci_host *host) +{ + u16 clk = 0; + + if (read_poll_timeout_atomic(sdhci_readw, clk, (clk & SDHCI_CLOCK_INT_STABLE), + 10, 20000, false, host, SDHCI_CLOCK_CONTROL)) { + pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return false; + } + return true; +} + +static void sdhci_gli_uhs2_reset_sd_tran(struct sdhci_host *host) +{ + /* do this on UHS2 mode */ + if (host->mmc->flags & MMC_UHS2_SD_TRAN) { + sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + sdhci_uhs2_clear_set_irqs(host, + SDHCI_INT_ALL_MASK, + SDHCI_UHS2_INT_ERROR_MASK); + } +} + +static void sdhci_gl9755_reset(struct sdhci_host *host, u8 mask) +{ + u16 clk_ctrl; + u16 ctrl2; + u8 rst; + + /* need internal clock */ + if (mask & SDHCI_RESET_ALL) { + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + + if ((ctrl2 & SDHCI_CTRL_V4_MODE) && + (ctrl2 & SDHCI_CTRL_UHS2_ENABLE)) { + sdhci_writew(host, + SDHCI_CLOCK_INT_EN, + SDHCI_CLOCK_CONTROL); + } else { + sdhci_writew(host, + SDHCI_CLOCK_INT_EN, + SDHCI_CLOCK_CONTROL); + sdhci_wait_clock_stable(host); + sdhci_writew(host, + SDHCI_CTRL_V4_MODE, + SDHCI_HOST_CONTROL2); + } + } + + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); + + /* reset sd-tran on UHS2 mode if need to reset cmd/data */ + if ((mask & SDHCI_RESET_CMD) | (mask & SDHCI_RESET_DATA)) + sdhci_gli_uhs2_reset_sd_tran(host); + + if (mask & SDHCI_RESET_ALL) + host->clock = 0; + + /* hw clears the bit when it's done */ + if (read_poll_timeout_atomic(sdhci_readb, rst, !(rst & mask), + 10, 100000, false, host, SDHCI_SOFTWARE_RESET)) { + pr_err("%s: Reset 0x%x never completed.\n", mmc_hostname(host->mmc), (int)mask); + sdhci_dumpregs(host); + /* manual clear */ + sdhci_writeb(host, 0, SDHCI_SOFTWARE_RESET); + return; + } +} + static inline void gl9767_vhs_read(struct pci_dev *pdev) { u32 vhs_enable; @@ -1068,6 +1291,7 @@ static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) gli_pcie_enable_msi(slot); slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; sdhci_enable_v4_mode(host); + gl9755_vendor_init(host); return 0; } @@ -1514,17 +1738,24 @@ static const struct sdhci_ops sdhci_gl9755_ops = { .read_w = sdhci_gli_readw, .read_b = sdhci_gli_readb, .set_clock = sdhci_gl9755_set_clock, + .set_power = gl9755_set_power, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_gl9755_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .voltage_switch = sdhci_gli_voltage_switch, + .dump_uhs2_regs = sdhci_uhs2_dump_regs, + .set_timeout = sdhci_uhs2_set_timeout, + .irq = sdhci_uhs2_irq, + .uhs2_pre_detect_init = sdhci_gli_pre_detect_init, }; const struct sdhci_pci_fixes sdhci_gl9755 = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, .probe_slot = gli_probe_slot_gl9755, + .add_host = sdhci_pci_uhs2_add_host, + .remove_host = sdhci_pci_uhs2_remove_host, .ops = &sdhci_gl9755_ops, #ifdef CONFIG_PM_SLEEP .resume = sdhci_pci_gli_resume,