diff mbox series

[5/9] wifi: rtw88: Add rtw8703b.c

Message ID 20240202121050.977223-6-fiona.klute@gmx.de (mailing list archive)
State New
Headers show
Series rtw88: Add support for RTL8723CS/RTL8703B | expand

Commit Message

Fiona Klute Feb. 2, 2024, 12:10 p.m. UTC
This is the main source for the new rtw88_8703b chip driver.

Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
---

rtw8703b_read_efuse retrieves the MAC address from DT, if
available. The code is not tied to any particular hardware, but
required to get a persistent address on the Pinephone. Do I need to
add a DT binding for this? Also, I think this could be moved into
rtw_chip_efuse_info_setup(), in preference to falling back to a random
MAC if there isn't a valid one in EFUSE. Would that be acceptable? If
yes, should EFUSE or DT take priority?

All the RTL8723CS EFUSE samples I've seen so far contain almost
entirely invalid data (all 0xff, except rtl_id, afe, and
thermal_meter), so I've added fallbacks in the EFUSE parser. In some
cases they alter specific bits so parsing in rtw_chip_efuse_info_setup
will get the right results. I'm not sure if this is the best approach:
The good part is that it works without changing the core EFUSE code,
the negative is that it's not visible to the core code that a fallback
has been applied. What do you think?

 drivers/net/wireless/realtek/rtw88/rtw8703b.c | 2106 +++++++++++++++++
 1 file changed, 2106 insertions(+)
 create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.c

--
2.43.0

Comments

Ping-Ke Shih Feb. 5, 2024, 3:01 a.m. UTC | #1
> -----Original Message-----
> From: Fiona Klute <fiona.klute@gmx.de>
> Sent: Friday, February 2, 2024 8:11 PM
> To: linux-wireless@vger.kernel.org; Ping-Ke Shih <pkshih@realtek.com>
> Cc: Kalle Valo <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-mmc@vger.kernel.org; Pavel
> Machek <pavel@ucw.cz>; Ondřej Jirman <megi@xff.cz>; Fiona Klute <fiona.klute@gmx.de>
> Subject: [PATCH 5/9] wifi: rtw88: Add rtw8703b.c
> 
> This is the main source for the new rtw88_8703b chip driver.
> 
> Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
> ---
> 
> rtw8703b_read_efuse retrieves the MAC address from DT, if
> available. The code is not tied to any particular hardware, but
> required to get a persistent address on the Pinephone. Do I need to
> add a DT binding for this? Also, I think this could be moved into
> rtw_chip_efuse_info_setup(), in preference to falling back to a random
> MAC if there isn't a valid one in EFUSE. Would that be acceptable? If
> yes, should EFUSE or DT take priority?
> 
> All the RTL8723CS EFUSE samples I've seen so far contain almost
> entirely invalid data (all 0xff, except rtl_id, afe, and
> thermal_meter), so I've added fallbacks in the EFUSE parser. In some
> cases they alter specific bits so parsing in rtw_chip_efuse_info_setup
> will get the right results. I'm not sure if this is the best approach:
> The good part is that it works without changing the core EFUSE code,
> the negative is that it's not visible to the core code that a fallback
> has been applied. What do you think?

I think efuse take priority, but you have said most are invalid data, so
you can write a rule to determine efuse is valid before using them. If
invalid, just use DT.

Sorry, I'm not familiar with DT, could you show me an example of DT node? 


> 
>  drivers/net/wireless/realtek/rtw88/rtw8703b.c | 2106 +++++++++++++++++
>  1 file changed, 2106 insertions(+)
>  create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.c
> 
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> new file mode 100644
> index 0000000000..ac9b1bf6ea
> --- /dev/null
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> @@ -0,0 +1,2106 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/* Copyright Fiona Klute <fiona.klute@gmx.de> */
> +
> +#include <linux/of_net.h>
> +#include "main.h"
> +#include "coex.h"
> +#include "debug.h"
> +#include "mac.h"
> +#include "phy.h"
> +#include "reg.h"
> +#include "rx.h"
> +#include "rtw8703b.h"
> +#include "rtw8703b_tables.h"
> +#include "rtw8723x.h"
> +
> +#define GET_RX_DESC_BW(rxdesc)                                              \
> +       (le32_get_bits(*((__le32 *)(rxdesc) + 0x04), GENMASK(31, 24)))

use struct and le32_get_bits() directly. 

> +
> +#define BIT_MASK_TXQ_INIT (BIT(7))
> +#define WLAN_RL_VAL 0x3030
> +/* disable BAR */
> +#define WLAN_BAR_VAL 0x0201ffff
> +#define WLAN_PIFS_VAL 0
> +#define WLAN_RX_PKT_LIMIT 0x18
> +#define WLAN_SLOT_TIME 0x09
> +#define WLAN_SPEC_SIFS 0x100a
> +#define WLAN_MAX_AGG_NR 0x1f
> +#define WLAN_AMPDU_MAX_TIME 0x70
> +
> +/* unit is 32us */
> +#define TBTT_PROHIBIT_SETUP_TIME 0x04
> +#define TBTT_PROHIBIT_HOLD_TIME 0x80
> +#define TBTT_PROHIBIT_HOLD_TIME_STOP_BCN 0x64
> +
> +/* raw pkt_stat->drv_info_sz is in unit of 8-bytes */
> +#define RX_DRV_INFO_SZ_UNIT_8703B 8
> +
> +#define TRANS_SEQ_END \
> +       { \
> +               0xFFFF, \
> +               RTW_PWR_CUT_ALL_MSK, \
> +               RTW_PWR_INTF_ALL_MSK, \
> +               0, \
> +               RTW_PWR_CMD_END, 0, 0}

nit: This looks a little odd, not like others of trans_pre_enable_8703b[].
How about this: 

#define TRANS_SEQ_END \
	{0xFFFF, \
	 RTW_PWR_CUT_ALL_MSK, \
	 RTW_PWR_INTF_ALL_MSK, \
	 0, \
	 RTW_PWR_CMD_END, 0, 0}

[...]

> +static const u8 rtw8703b_cck_swing_table[][16] = {
> +       {0x44, 0x42, 0x3C, 0x33, 0x28, 0x1C, 0x13, 0x0B, 0x05, 0x02,
> +               0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-16dB*/

nit: align "{" ?

	{0x44, 0x42, 0x3C, 0x33, 0x28, 0x1C, 0x13, 0x0B, 0x05, 0x02,
	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-16dB*/

[...]

> +
> +/* Default power index table for RTL8703B, used if EFUSE does not
> + * contain valid data. Replaces EFUSE data from offset 0x10 (start of
> + * txpwr_idx_table).
> + */
> +static const u8 rtw8703b_txpwr_idx_table[] = {
> +       0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
> +       0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x02
> +};
> +
> +#define RTW8703B_TXPWR_IDX_TABLE_LEN ARRAY_SIZE(rtw8703b_txpwr_idx_table)

nit: This definition seems not save much.

> +
> +#define DBG_EFUSE_FIX(name)                                         \

suggest to not hide 'rtwdev'

> +       rtw_dbg(rtwdev, RTW_DBG_EFUSE, "Fixed invalid EFUSE value: " \
> +               # name "=0x%x\n", rtwdev->efuse.name)

a blank line?

> +static int rtw8703b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map)
> +{
> +       struct rtw_efuse *efuse = &rtwdev->efuse;
> +       int ret = rtw8723x_read_efuse(rtwdev, log_map);

I prefer

	int ret;

	ret = rtw8723x_read_efuse(rtwdev, log_map);
	if (ret)
		return ret;


> +
> +       if (ret != 0)
> +               return ret;
> +
> +#ifdef CONFIG_OF
> +       /* Prefer MAC from DT, if available. On some devices like the
> +        * Pinephone that might be the only way to get a valid MAC.
> +        */
> +       struct device_node *node = rtwdev->dev->of_node;

Should move this statement to topmost of this function? no compiler warning? 

Or, make an individual function to read mac addr from DT?

> +
> +       if (node) {
> +               ret = of_get_mac_address(node, efuse->addr);
> +               if (ret == 0) {
> +                       rtw_dbg(rtwdev, RTW_DBG_EFUSE,
> +                               "got wifi mac address from DT: %pM\n",
> +                               efuse->addr);
> +               }
> +       }
> +#endif /* CONFIG_OF */
> +
> +       /* If TX power index table in EFUSE is invalid, fall back to
> +        * built-in table.
> +        */
> +       u8 *pwr = (u8 *)efuse->txpwr_idx_table;
> +       bool valid = false;

I tend to move these declaration to top of this function too, but not sure why
compiler also doesn't warn this in my side. Seemingly kernel changes default
compiler flags? 


[...]

> +static void rtw8703b_set_channel_bb(struct rtw_dev *rtwdev, u8 channel, u8 bw,
> +                                   u8 primary_ch_idx)
> +{
> +       const struct rtw_backup_info *cck_dfir;
> +       int i;
> +
> +       cck_dfir = channel <= 13 ? cck_dfir_cfg[0] : cck_dfir_cfg[1];
> +
> +       for (i = 0; i < CCK_DFIR_NR_8703B; i++, cck_dfir++)
> +               rtw_write32(rtwdev, cck_dfir->reg, cck_dfir->val);
> +
> +       switch (bw) {
> +       case RTW_CHANNEL_WIDTH_20:
> +               rtw_write32_mask(rtwdev, REG_FPGA0_RFMOD, BIT_MASK_RFMOD, 0x0);
> +               rtw_write32_mask(rtwdev, REG_FPGA1_RFMOD, BIT_MASK_RFMOD, 0x0);
> +               rtw_write32_mask(rtwdev, REG_OFDM0_TX_PSD_NOISE,
> +                                GENMASK(31, 20), 0x0);
> +               rtw_write32(rtwdev, REG_BBRX_DFIR, 0x4A880000);
> +               rtw_write32(rtwdev, REG_OFDM0_A_TX_AFE, 0x19F60000);
> +               break;
> +       case RTW_CHANNEL_WIDTH_40:
> +               rtw_write32_mask(rtwdev, REG_FPGA0_RFMOD, BIT_MASK_RFMOD, 0x1);
> +               rtw_write32_mask(rtwdev, REG_FPGA1_RFMOD, BIT_MASK_RFMOD, 0x1);
> +               rtw_write32(rtwdev, REG_BBRX_DFIR, 0x40100000);
> +               rtw_write32(rtwdev, REG_OFDM0_A_TX_AFE, 0x51F60000);
> +               rtw_write32_mask(rtwdev, REG_CCK0_SYS, BIT_CCK_SIDE_BAND,
> +                                (primary_ch_idx == RTW_SC_20_UPPER ? 1 : 0));

unnecessary parenthesis around ? :

> +               rtw_write32_mask(rtwdev, REG_OFDM_FA_RSTD_11N, 0xC00,
> +                                primary_ch_idx == RTW_SC_20_UPPER ? 2 : 1);
> +
> +               rtw_write32_mask(rtwdev, REG_BB_PWR_SAV5_11N, GENMASK(27, 26),
> +                                primary_ch_idx == RTW_SC_20_UPPER ? 1 : 2);
> +               break;
> +       default:
> +               break;
> +       }
> +}
> +

[...]

> +static void rtw8703b_query_rx_desc(struct rtw_dev *rtwdev, u8 *rx_desc,
> +                                  struct rtw_rx_pkt_stat *pkt_stat,
> +                                  struct ieee80211_rx_status *rx_status)
> +{
> +       struct ieee80211_hdr *hdr;
> +       u32 desc_sz = rtwdev->chip->rx_pkt_desc_sz;
> +       u8 *phy_status = NULL;
> +
> +       memset(pkt_stat, 0, sizeof(*pkt_stat));
> +
> +       pkt_stat->phy_status = GET_RX_DESC_PHYST(rx_desc);
> +       pkt_stat->icv_err = GET_RX_DESC_ICV_ERR(rx_desc);
> +       pkt_stat->crc_err = GET_RX_DESC_CRC32(rx_desc);
> +       pkt_stat->decrypted = !GET_RX_DESC_SWDEC(rx_desc) &&
> +                             GET_RX_DESC_ENC_TYPE(rx_desc) != RX_DESC_ENC_NONE;
> +       pkt_stat->is_c2h = GET_RX_DESC_C2H(rx_desc);
> +       pkt_stat->pkt_len = GET_RX_DESC_PKT_LEN(rx_desc);
> +       pkt_stat->drv_info_sz = GET_RX_DESC_DRV_INFO_SIZE(rx_desc);
> +       pkt_stat->shift = GET_RX_DESC_SHIFT(rx_desc);
> +       pkt_stat->rate = GET_RX_DESC_RX_RATE(rx_desc);
> +       pkt_stat->cam_id = GET_RX_DESC_MACID(rx_desc);
> +       pkt_stat->ppdu_cnt = 0;
> +       pkt_stat->tsf_low = GET_RX_DESC_TSFL(rx_desc);

Could you add a separate patch to convert these macros to struct style? 
It is fine to keep as it was, and do this conversion afterward.  

[...]

> +static
> +void rtw8703b_iqk_fill_a_matrix(struct rtw_dev *rtwdev, const s32 result[])
> +{
> +       s32 oldval_1;
> +       s32 x, y;
> +       s32 tx1_a, tx1_a_ext;
> +       s32 tx1_c, tx1_c_ext;
> +       u32 tmp_rx_iqi = 0x40000100 & GENMASK(31, 16);

reverse X'mas tree order


> +
> +static void rtw8703b_phy_calibration(struct rtw_dev *rtwdev)
> +{
> +       /* For some reason path A is called S1 and B S0 in shared
> +        * rtw88 calibration data.
> +        */
> +       struct rtw_dm_info *dm_info = &rtwdev->dm_info;
> +       s32 result[IQK_ROUND_SIZE][IQK_NR];
> +       struct rtw8723x_iqk_backup_regs backup;
> +       u8 i, j;
> +       u8 final_candidate = IQK_ROUND_INVALID;
> +       bool good;

reverse X'mas tree order

> +MODULE_FIRMWARE("rtw88/rtw8703b_wow_fw.bin");

Just curious. Have you tried WOW for this chip?
Fiona Klute Feb. 5, 2024, 7:06 p.m. UTC | #2
Am 05.02.24 um 04:01 schrieb Ping-Ke Shih:
>> -----Original Message-----
>> From: Fiona Klute <fiona.klute@gmx.de>
>> Sent: Friday, February 2, 2024 8:11 PM
>> To: linux-wireless@vger.kernel.org; Ping-Ke Shih <pkshih@realtek.com>
>> Cc: Kalle Valo <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-mmc@vger.kernel.org; Pavel
>> Machek <pavel@ucw.cz>; Ondřej Jirman <megi@xff.cz>; Fiona Klute <fiona.klute@gmx.de>
>> Subject: [PATCH 5/9] wifi: rtw88: Add rtw8703b.c
>>
>> This is the main source for the new rtw88_8703b chip driver.
>>
>> Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
>> ---
>>
>> rtw8703b_read_efuse retrieves the MAC address from DT, if
>> available. The code is not tied to any particular hardware, but
>> required to get a persistent address on the Pinephone. Do I need to
>> add a DT binding for this? Also, I think this could be moved into
>> rtw_chip_efuse_info_setup(), in preference to falling back to a random
>> MAC if there isn't a valid one in EFUSE. Would that be acceptable? If
>> yes, should EFUSE or DT take priority?
>>
>> All the RTL8723CS EFUSE samples I've seen so far contain almost
>> entirely invalid data (all 0xff, except rtl_id, afe, and
>> thermal_meter), so I've added fallbacks in the EFUSE parser. In some
>> cases they alter specific bits so parsing in rtw_chip_efuse_info_setup
>> will get the right results. I'm not sure if this is the best approach:
>> The good part is that it works without changing the core EFUSE code,
>> the negative is that it's not visible to the core code that a fallback
>> has been applied. What do you think?
>
> I think efuse take priority, but you have said most are invalid data, so
> you can write a rule to determine efuse is valid before using them. If
> invalid, just use DT.

That's no problem, I could use is_valid_ether_addr() like
rtw_chip_efuse_info_setup() in main.c already does. That's why I'm
wondering if it'd make sense to move getting the MAC from DT to there,
and use MAC from EFUSE, DT, or random in that order of preference for
all rtw88 devices.

> Sorry, I'm not familiar with DT, could you show me an example of DT node?

I'm afraid I'm not familiar with the details either, but this is how the
SDIO wifi device for the Pinephone is defined (in
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi, as of v6.8-rc2):

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&reg_vbat_wifi>;
	vqmmc-supply = <&reg_dldo4>;
	bus-width = <4>;
	non-removable;
	status = "okay";

	rtl8723cs: wifi@1 {
		reg = <1>;
	};
};

As far as I understand the "reg = <1>;" line implies that the bootloader
can provide some setup (like the MAC address). I hope someone with more
knowledge can correct me or add missing details.

>>   drivers/net/wireless/realtek/rtw88/rtw8703b.c | 2106 +++++++++++++++++
>>   1 file changed, 2106 insertions(+)
>>   create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.c
>>
>> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
>> b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
>> new file mode 100644
>> index 0000000000..ac9b1bf6ea
>> --- /dev/null
>> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
>> @@ -0,0 +1,2106 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>> +/* Copyright Fiona Klute <fiona.klute@gmx.de> */
>> +
>> +#include <linux/of_net.h>
>> +#include "main.h"
>> +#include "coex.h"
>> +#include "debug.h"
>> +#include "mac.h"
>> +#include "phy.h"
>> +#include "reg.h"
>> +#include "rx.h"
>> +#include "rtw8703b.h"
>> +#include "rtw8703b_tables.h"
>> +#include "rtw8723x.h"
>> +
>> +#define GET_RX_DESC_BW(rxdesc)                                              \
>> +       (le32_get_bits(*((__le32 *)(rxdesc) + 0x04), GENMASK(31, 24)))
>
> use struct and le32_get_bits() directly.

Do you mean to create a struct to represent the RX descriptor and then
use le*_get_bits() on the fields to get the values? I could try, but I'd
have to replace all the other GET_RX_DESC_* macros defined in rx.h (and
shared by the other chip drivers), too, or it won't really make a
difference (more below).

[...]

>> +
>> +       if (ret != 0)
>> +               return ret;
>> +
>> +#ifdef CONFIG_OF
>> +       /* Prefer MAC from DT, if available. On some devices like the
>> +        * Pinephone that might be the only way to get a valid MAC.
>> +        */
>> +       struct device_node *node = rtwdev->dev->of_node;
>
> Should move this statement to topmost of this function? no compiler warning?
>
> Or, make an individual function to read mac addr from DT?

I can move that to a separate function if you prefer, see below for the
compiler warning.

>> +
>> +       if (node) {
>> +               ret = of_get_mac_address(node, efuse->addr);
>> +               if (ret == 0) {
>> +                       rtw_dbg(rtwdev, RTW_DBG_EFUSE,
>> +                               "got wifi mac address from DT: %pM\n",
>> +                               efuse->addr);
>> +               }
>> +       }
>> +#endif /* CONFIG_OF */
>> +
>> +       /* If TX power index table in EFUSE is invalid, fall back to
>> +        * built-in table.
>> +        */
>> +       u8 *pwr = (u8 *)efuse->txpwr_idx_table;
>> +       bool valid = false;
>
> I tend to move these declaration to top of this function too, but not sure why
> compiler also doesn't warn this in my side. Seemingly kernel changes default
> compiler flags?

Yes, I learned about that while working on this driver. First the move
to gnu11, and then removing -Wdeclaration-after-statement with
b5ec6fd286dfa466f64cb0e56ed768092d0342ae in 6.5. The commit message says
"It will still be recommeneded [sic!] to place declarations at the start
of a scope where possible, but it will no longer be enforced", so I'll
move these up.

For the struct device_node pointer I think it makes sense to leave the
declaration within the #ifdef CONFIG_OF section (unless we restructure
that into a separate function) because it's unused otherwise.

[...]

>> +static void rtw8703b_query_rx_desc(struct rtw_dev *rtwdev, u8 *rx_desc,
>> +                                  struct rtw_rx_pkt_stat *pkt_stat,
>> +                                  struct ieee80211_rx_status *rx_status)
>> +{
>> +       struct ieee80211_hdr *hdr;
>> +       u32 desc_sz = rtwdev->chip->rx_pkt_desc_sz;
>> +       u8 *phy_status = NULL;
>> +
>> +       memset(pkt_stat, 0, sizeof(*pkt_stat));
>> +
>> +       pkt_stat->phy_status = GET_RX_DESC_PHYST(rx_desc);
>> +       pkt_stat->icv_err = GET_RX_DESC_ICV_ERR(rx_desc);
>> +       pkt_stat->crc_err = GET_RX_DESC_CRC32(rx_desc);
>> +       pkt_stat->decrypted = !GET_RX_DESC_SWDEC(rx_desc) &&
>> +                             GET_RX_DESC_ENC_TYPE(rx_desc) != RX_DESC_ENC_NONE;
>> +       pkt_stat->is_c2h = GET_RX_DESC_C2H(rx_desc);
>> +       pkt_stat->pkt_len = GET_RX_DESC_PKT_LEN(rx_desc);
>> +       pkt_stat->drv_info_sz = GET_RX_DESC_DRV_INFO_SIZE(rx_desc);
>> +       pkt_stat->shift = GET_RX_DESC_SHIFT(rx_desc);
>> +       pkt_stat->rate = GET_RX_DESC_RX_RATE(rx_desc);
>> +       pkt_stat->cam_id = GET_RX_DESC_MACID(rx_desc);
>> +       pkt_stat->ppdu_cnt = 0;
>> +       pkt_stat->tsf_low = GET_RX_DESC_TSFL(rx_desc);
>
> Could you add a separate patch to convert these macros to struct style?
> It is fine to keep as it was, and do this conversion afterward.

In principle yes, but as I mentioned above I'd basically have to
reinvent all the definitions from rx.h to make it work, I'm not sure if
that really simplifies things. If you want to refactor those I think
it'd be best to do it for all chip drivers together.

The GET_PHY_STAT_* macros are a different matter. The PHY status
structure is different between 8703b and the other supported chips, so
those could be replaced with a struct without duplication. Or at least
mostly, some elements are bit fields or values with < 8 bits, where I
think a macro is simpler than a struct with different definitions
depending on endianess. I am worried about introducing an endianess
error though, so I'd have to ask for careful review of such a patch.

[...]

>> +MODULE_FIRMWARE("rtw88/rtw8703b_wow_fw.bin");
>
> Just curious. Have you tried WOW for this chip?

Kind of. It definitely doesn't work with this code, that's why I haven't
filled wowlan_stub yet. I already know the check if WOW has been enabled
would have to be changed in wow.c (I'd probably add a "legacy" function
like for the firmware download), but there must be some other details
because I couldn't get it to work yet. But others got it to work with
the out-of-tree driver, so it must be possible.

I've applied the other minor changes you suggested.
Ping-Ke Shih Feb. 6, 2024, 1:37 a.m. UTC | #3
> -----Original Message-----
> From: Fiona Klute <fiona.klute@gmx.de>
> Sent: Tuesday, February 6, 2024 3:06 AM
> To: Ping-Ke Shih <pkshih@realtek.com>; linux-wireless@vger.kernel.org
> Cc: Kalle Valo <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-mmc@vger.kernel.org; Pavel
> Machek <pavel@ucw.cz>; Ondřej Jirman <megi@xff.cz>
> Subject: Re: [PATCH 5/9] wifi: rtw88: Add rtw8703b.c
> 
> 
> I'm afraid I'm not familiar with the details either, but this is how the
> SDIO wifi device for the Pinephone is defined (in
> arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi, as of v6.8-rc2):
> 
> &mmc1 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&mmc1_pins>;
>         vmmc-supply = <&reg_vbat_wifi>;
>         vqmmc-supply = <&reg_dldo4>;
>         bus-width = <4>;
>         non-removable;
>         status = "okay";
> 
>         rtl8723cs: wifi@1 {

I think rtl8723cs is module name of vendor driver, so will you add rtw88_8723ds?

>                 reg = <1>;
>         };
> };
> 
> As far as I understand the "reg = <1>;" line implies that the bootloader
> can provide some setup (like the MAC address). I hope someone with more
> knowledge can correct me or add missing details.
> 
> >>   drivers/net/wireless/realtek/rtw88/rtw8703b.c | 2106 +++++++++++++++++
> >>   1 file changed, 2106 insertions(+)
> >>   create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.c
> >>
> >> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> >> b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> >> new file mode 100644
> >> index 0000000000..ac9b1bf6ea
> >> --- /dev/null
> >> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> >> @@ -0,0 +1,2106 @@
> >> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> >> +/* Copyright Fiona Klute <fiona.klute@gmx.de> */
> >> +
> >> +#include <linux/of_net.h>
> >> +#include "main.h"
> >> +#include "coex.h"
> >> +#include "debug.h"
> >> +#include "mac.h"
> >> +#include "phy.h"
> >> +#include "reg.h"
> >> +#include "rx.h"
> >> +#include "rtw8703b.h"
> >> +#include "rtw8703b_tables.h"
> >> +#include "rtw8723x.h"
> >> +
> >> +#define GET_RX_DESC_BW(rxdesc)                                              \
> >> +       (le32_get_bits(*((__le32 *)(rxdesc) + 0x04), GENMASK(31, 24)))
> >
> > use struct and le32_get_bits() directly.
> 
> Do you mean to create a struct to represent the RX descriptor and then
> use le*_get_bits() on the fields to get the values? I could try, but I'd
> have to replace all the other GET_RX_DESC_* macros defined in rx.h (and
> shared by the other chip drivers), too, or it won't really make a
> difference (more below).

Like this:
88b9d8e6cf9c ("wifi: rtw88: use struct instead of macros to set TX desc")

It needs to modify all across chips. 

> 
> [...]
> 
> >> +
> >> +       if (ret != 0)
> >> +               return ret;
> >> +
> >> +#ifdef CONFIG_OF
> >> +       /* Prefer MAC from DT, if available. On some devices like the
> >> +        * Pinephone that might be the only way to get a valid MAC.
> >> +        */
> >> +       struct device_node *node = rtwdev->dev->of_node;
> >
> > Should move this statement to topmost of this function? no compiler warning?
> >
> > Or, make an individual function to read mac addr from DT?
> 
> I can move that to a separate function if you prefer, see below for the
> compiler warning.

Because this is CONFIG_OF chunk, it will look like below if you move declaration upward:

#ifdef CONFIG_OF
	struct device_node *node = rtwdev->dev->of_node;
#endif
	// other declaration ...

	// other code
#ifdef CONFIG_OF
	if (node) {
		...
	}
#endif

It seems like too much #ifdef. With a separate function, it can be single #ifdef. 
That is my point. 

> 
> >> +
> >> +       if (node) {
> >> +               ret = of_get_mac_address(node, efuse->addr);
> >> +               if (ret == 0) {
> >> +                       rtw_dbg(rtwdev, RTW_DBG_EFUSE,
> >> +                               "got wifi mac address from DT: %pM\n",
> >> +                               efuse->addr);
> >> +               }
> >> +       }
> >> +#endif /* CONFIG_OF */
> >> +
> >> +       /* If TX power index table in EFUSE is invalid, fall back to
> >> +        * built-in table.
> >> +        */
> >> +       u8 *pwr = (u8 *)efuse->txpwr_idx_table;
> >> +       bool valid = false;
> >
> > I tend to move these declaration to top of this function too, but not sure why
> > compiler also doesn't warn this in my side. Seemingly kernel changes default
> > compiler flags?
> 
> Yes, I learned about that while working on this driver. First the move
> to gnu11, and then removing -Wdeclaration-after-statement with
> b5ec6fd286dfa466f64cb0e56ed768092d0342ae in 6.5. The commit message says
> "It will still be recommeneded [sic!] to place declarations at the start
> of a scope where possible, but it will no longer be enforced", so I'll
> move these up.

Thanks for the info. 

> 
> For the struct device_node pointer I think it makes sense to leave the
> declaration within the #ifdef CONFIG_OF section (unless we restructure
> that into a separate function) because it's unused otherwise.

See my point above. But your point makes sense too. 

> 
> [...]
> 
> >> +static void rtw8703b_query_rx_desc(struct rtw_dev *rtwdev, u8 *rx_desc,
> >> +                                  struct rtw_rx_pkt_stat *pkt_stat,
> >> +                                  struct ieee80211_rx_status *rx_status)
> >> +{
> >> +       struct ieee80211_hdr *hdr;
> >> +       u32 desc_sz = rtwdev->chip->rx_pkt_desc_sz;
> >> +       u8 *phy_status = NULL;
> >> +
> >> +       memset(pkt_stat, 0, sizeof(*pkt_stat));
> >> +
> >> +       pkt_stat->phy_status = GET_RX_DESC_PHYST(rx_desc);
> >> +       pkt_stat->icv_err = GET_RX_DESC_ICV_ERR(rx_desc);
> >> +       pkt_stat->crc_err = GET_RX_DESC_CRC32(rx_desc);
> >> +       pkt_stat->decrypted = !GET_RX_DESC_SWDEC(rx_desc) &&
> >> +                             GET_RX_DESC_ENC_TYPE(rx_desc) != RX_DESC_ENC_NONE;
> >> +       pkt_stat->is_c2h = GET_RX_DESC_C2H(rx_desc);
> >> +       pkt_stat->pkt_len = GET_RX_DESC_PKT_LEN(rx_desc);
> >> +       pkt_stat->drv_info_sz = GET_RX_DESC_DRV_INFO_SIZE(rx_desc);
> >> +       pkt_stat->shift = GET_RX_DESC_SHIFT(rx_desc);
> >> +       pkt_stat->rate = GET_RX_DESC_RX_RATE(rx_desc);
> >> +       pkt_stat->cam_id = GET_RX_DESC_MACID(rx_desc);
> >> +       pkt_stat->ppdu_cnt = 0;
> >> +       pkt_stat->tsf_low = GET_RX_DESC_TSFL(rx_desc);
> >
> > Could you add a separate patch to convert these macros to struct style?
> > It is fine to keep as it was, and do this conversion afterward.
> 
> In principle yes, but as I mentioned above I'd basically have to
> reinvent all the definitions from rx.h to make it work, I'm not sure if
> that really simplifies things. If you want to refactor those I think
> it'd be best to do it for all chip drivers together.

Yes, for all chips. 

> 
> The GET_PHY_STAT_* macros are a different matter. The PHY status
> structure is different between 8703b and the other supported chips, so
> those could be replaced with a struct without duplication. Or at least
> mostly, some elements are bit fields or values with < 8 bits, where I
> think a macro is simpler than a struct with different definitions
> depending on endianess. I am worried about introducing an endianess
> error though, so I'd have to ask for careful review of such a patch.

I think we can keep it as it was for this patchset, and another patches later
to convert this kind of macros. Months ago, Kalle guided the rules how
rtw88/89 can do [1]. For me, I will convert macros to struct once I touch
them. 

[1] https://lore.kernel.org/all/87a5zpb71j.fsf_-_@kernel.org/
Pavel Machek Feb. 6, 2024, 8:12 a.m. UTC | #4
hi!

> > I'm afraid I'm not familiar with the details either, but this is how the
> > SDIO wifi device for the Pinephone is defined (in
> > arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi, as of v6.8-rc2):
> > 
> > &mmc1 {
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&mmc1_pins>;
> >         vmmc-supply = <&reg_vbat_wifi>;
> >         vqmmc-supply = <&reg_dldo4>;
> >         bus-width = <4>;
> >         non-removable;
> >         status = "okay";
> > 
> >         rtl8723cs: wifi@1 {
> 
> I think rtl8723cs is module name of vendor driver, so will you add rtw88_8723ds?

dts is supposed to describe hardware, not driver structure. So a) this
label should not really matter b) it really should not really be
changed to match the driver name.

Best regards,
								Pavel
Ping-Ke Shih Feb. 7, 2024, 5:58 a.m. UTC | #5
> -----Original Message-----
> From: Ping-Ke Shih <pkshih@realtek.com>
> Sent: Tuesday, February 6, 2024 9:38 AM
> To: Fiona Klute <fiona.klute@gmx.de>; linux-wireless@vger.kernel.org
> Cc: Kalle Valo <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-mmc@vger.kernel.org; Pavel
> Machek <pavel@ucw.cz>; Ondřej Jirman <megi@xff.cz>
> Subject: RE: [PATCH 5/9] wifi: rtw88: Add rtw8703b.c
> 
> 
> 
> > -----Original Message-----
> > From: Fiona Klute <fiona.klute@gmx.de>
> > Sent: Tuesday, February 6, 2024 3:06 AM
> > To: Ping-Ke Shih <pkshih@realtek.com>; linux-wireless@vger.kernel.org
> > Cc: Kalle Valo <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-mmc@vger.kernel.org;
> Pavel
> > Machek <pavel@ucw.cz>; Ondřej Jirman <megi@xff.cz>
> > Subject: Re: [PATCH 5/9] wifi: rtw88: Add rtw8703b.c
> >
> > >> +
> > >> +       if (ret != 0)
> > >> +               return ret;
> > >> +
> > >> +#ifdef CONFIG_OF
> > >> +       /* Prefer MAC from DT, if available. On some devices like the
> > >> +        * Pinephone that might be the only way to get a valid MAC.
> > >> +        */
> > >> +       struct device_node *node = rtwdev->dev->of_node;
> > >
> > > Should move this statement to topmost of this function? no compiler warning?
> > >
> > > Or, make an individual function to read mac addr from DT?
> >
> > I can move that to a separate function if you prefer, see below for the
> > compiler warning.
> 
> Because this is CONFIG_OF chunk, it will look like below if you move declaration upward:
> 
> #ifdef CONFIG_OF
> 	struct device_node *node = rtwdev->dev->of_node;
> #endif
> 	// other declaration ...
> 
> 	// other code
> #ifdef CONFIG_OF
> 	if (node) {
> 		...
> 	}
> #endif
> 
> It seems like too much #ifdef. With a separate function, it can be single #ifdef.
> That is my point.
> 

If CONFIG_OF isn't defined, compiler will select a static inline function that
just returns -ENODEV [1], so I think you don't need a #ifdef chunk here. 

[1] https://elixir.bootlin.com/linux/latest/source/include/linux/of_net.h#L27
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.c b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
new file mode 100644
index 0000000000..ac9b1bf6ea
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
@@ -0,0 +1,2106 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright Fiona Klute <fiona.klute@gmx.de> */
+
+#include <linux/of_net.h>
+#include "main.h"
+#include "coex.h"
+#include "debug.h"
+#include "mac.h"
+#include "phy.h"
+#include "reg.h"
+#include "rx.h"
+#include "rtw8703b.h"
+#include "rtw8703b_tables.h"
+#include "rtw8723x.h"
+
+#define GET_RX_DESC_BW(rxdesc)                                              \
+	(le32_get_bits(*((__le32 *)(rxdesc) + 0x04), GENMASK(31, 24)))
+
+#define BIT_MASK_TXQ_INIT (BIT(7))
+#define WLAN_RL_VAL 0x3030
+/* disable BAR */
+#define WLAN_BAR_VAL 0x0201ffff
+#define WLAN_PIFS_VAL 0
+#define WLAN_RX_PKT_LIMIT 0x18
+#define WLAN_SLOT_TIME 0x09
+#define WLAN_SPEC_SIFS 0x100a
+#define WLAN_MAX_AGG_NR 0x1f
+#define WLAN_AMPDU_MAX_TIME 0x70
+
+/* unit is 32us */
+#define TBTT_PROHIBIT_SETUP_TIME 0x04
+#define TBTT_PROHIBIT_HOLD_TIME 0x80
+#define TBTT_PROHIBIT_HOLD_TIME_STOP_BCN 0x64
+
+/* raw pkt_stat->drv_info_sz is in unit of 8-bytes */
+#define RX_DRV_INFO_SZ_UNIT_8703B 8
+
+#define TRANS_SEQ_END \
+	{ \
+		0xFFFF, \
+		RTW_PWR_CUT_ALL_MSK, \
+		RTW_PWR_INTF_ALL_MSK, \
+		0, \
+		RTW_PWR_CMD_END, 0, 0}
+
+/* rssi in percentage % (dbm = % - 100) */
+/* These are used to select simple signal quality levels, might need
+ * tweaking. Same for rf_para tables below.
+ */
+static const u8 wl_rssi_step_8703b[] = {60, 50, 44, 30};
+static const u8 bt_rssi_step_8703b[] = {30, 30, 30, 30};
+static const struct coex_5g_afh_map afh_5g_8703b[] = { {0, 0, 0} };
+
+/* Actually decreasing wifi TX power/RX gain isn't implemented in
+ * rtw8703b, but hopefully adjusting the BT side helps.
+ */
+static const struct coex_rf_para rf_para_tx_8703b[] = {
+	{0, 0, false, 7},  /* for normal */
+	{0, 10, false, 7}, /* for WL-CPT */
+	{1, 0, true, 4},
+	{1, 2, true, 4},
+	{1, 10, true, 4},
+	{1, 15, true, 4}
+};
+
+static const struct coex_rf_para rf_para_rx_8703b[] = {
+	{0, 0, false, 7},  /* for normal */
+	{0, 10, false, 7}, /* for WL-CPT */
+	{1, 0, true, 5},
+	{1, 2, true, 5},
+	{1, 10, true, 5},
+	{1, 15, true, 5}
+};
+
+static const u32 rtw8703b_ofdm_swing_table[] = {
+	0x0b40002d, /* 0,  -15.0dB */
+	0x0c000030, /* 1,  -14.5dB */
+	0x0cc00033, /* 2,  -14.0dB */
+	0x0d800036, /* 3,  -13.5dB */
+	0x0e400039, /* 4,  -13.0dB */
+	0x0f00003c, /* 5,  -12.5dB */
+	0x10000040, /* 6,  -12.0dB */
+	0x11000044, /* 7,  -11.5dB */
+	0x12000048, /* 8,  -11.0dB */
+	0x1300004c, /* 9,  -10.5dB */
+	0x14400051, /* 10, -10.0dB */
+	0x15800056, /* 11, -9.5dB */
+	0x16c0005b, /* 12, -9.0dB */
+	0x18000060, /* 13, -8.5dB */
+	0x19800066, /* 14, -8.0dB */
+	0x1b00006c, /* 15, -7.5dB */
+	0x1c800072, /* 16, -7.0dB */
+	0x1e400079, /* 17, -6.5dB */
+	0x20000080, /* 18, -6.0dB */
+	0x22000088, /* 19, -5.5dB */
+	0x24000090, /* 20, -5.0dB */
+	0x26000098, /* 21, -4.5dB */
+	0x288000a2, /* 22, -4.0dB */
+	0x2ac000ab, /* 23, -3.5dB */
+	0x2d4000b5, /* 24, -3.0dB */
+	0x300000c0, /* 25, -2.5dB */
+	0x32c000cb, /* 26, -2.0dB */
+	0x35c000d7, /* 27, -1.5dB */
+	0x390000e4, /* 28, -1.0dB */
+	0x3c8000f2, /* 29, -0.5dB */
+	0x40000100, /* 30, +0dB */
+	0x43c0010f, /* 31, +0.5dB */
+	0x47c0011f, /* 32, +1.0dB */
+	0x4c000130, /* 33, +1.5dB */
+	0x50800142, /* 34, +2.0dB */
+	0x55400155, /* 35, +2.5dB */
+	0x5a400169, /* 36, +3.0dB */
+	0x5fc0017f, /* 37, +3.5dB */
+	0x65400195, /* 38, +4.0dB */
+	0x6b8001ae, /* 39, +4.5dB */
+	0x71c001c7, /* 40, +5.0dB */
+	0x788001e2, /* 41, +5.5dB */
+	0x7f8001fe /* 42, +6.0dB */
+};
+
+static const u32 rtw8703b_cck_pwr_regs[] = {
+	0x0a22, 0x0a23, 0x0a24, 0x0a25, 0x0a26, 0x0a27, 0x0a28, 0x0a29,
+	0x0a9a, 0x0a9b, 0x0a9c, 0x0a9d, 0x0aa0, 0x0aa1, 0x0aa2, 0x0aa3,
+};
+
+static const u8 rtw8703b_cck_swing_table[][16] = {
+	{0x44, 0x42, 0x3C, 0x33, 0x28, 0x1C, 0x13, 0x0B, 0x05, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-16dB*/
+	{0x48, 0x46, 0x3F, 0x36, 0x2A, 0x1E, 0x14, 0x0B, 0x05, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-15.5dB*/
+	{0x4D, 0x4A, 0x43, 0x39, 0x2C, 0x20, 0x15, 0x0C, 0x06, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-15dB*/
+	{0x51, 0x4F, 0x47, 0x3C, 0x2F, 0x22, 0x16, 0x0D, 0x06, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-14.5dB*/
+	{0x56, 0x53, 0x4B, 0x40, 0x32, 0x24, 0x17, 0x0E, 0x06, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-14dB*/
+	{0x5B, 0x58, 0x50, 0x43, 0x35, 0x26, 0x19, 0x0E, 0x07, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-13.5dB*/
+	{0x60, 0x5D, 0x54, 0x47, 0x38, 0x28, 0x1A, 0x0F, 0x07, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-13dB*/
+	{0x66, 0x63, 0x59, 0x4C, 0x3B, 0x2B, 0x1C, 0x10, 0x08, 0x02,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-12.5dB*/
+	{0x6C, 0x69, 0x5F, 0x50, 0x3F, 0x2D, 0x1E, 0x11, 0x08, 0x03,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-12dB*/
+	{0x73, 0x6F, 0x64, 0x55, 0x42, 0x30, 0x1F, 0x12, 0x08, 0x03,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-11.5dB*/
+	{0x79, 0x76, 0x6A, 0x5A, 0x46, 0x33, 0x21, 0x13, 0x09, 0x03,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-11dB*/
+	{0x81, 0x7C, 0x71, 0x5F, 0x4A, 0x36, 0x23, 0x14, 0x0A, 0x03,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-10.5dB*/
+	{0x88, 0x84, 0x77, 0x65, 0x4F, 0x39, 0x25, 0x15, 0x0A, 0x03,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-10dB*/
+	{0x90, 0x8C, 0x7E, 0x6B, 0x54, 0x3C, 0x27, 0x17, 0x0B, 0x03,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-9.5dB*/
+	{0x99, 0x94, 0x86, 0x71, 0x58, 0x40, 0x2A, 0x18, 0x0B, 0x04,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-9dB*/
+	{0xA2, 0x9D, 0x8E, 0x78, 0x5E, 0x43, 0x2C, 0x19, 0x0C, 0x04,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-8.5dB*/
+	{0xAC, 0xA6, 0x96, 0x7F, 0x63, 0x47, 0x2F, 0x1B, 0x0D, 0x04,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-8dB*/
+	{0xB6, 0xB0, 0x9F, 0x87, 0x69, 0x4C, 0x32, 0x1D, 0x0D, 0x04,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-7.5dB*/
+	{0xC1, 0xBA, 0xA8, 0x8F, 0x6F, 0x50, 0x35, 0x1E, 0x0E, 0x04,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-7dB*/
+	{0xCC, 0xC5, 0xB2, 0x97, 0x76, 0x55, 0x38, 0x20, 0x0F, 0x05,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*-6.5dB*/
+	{0xD8, 0xD1, 0xBD, 0xA0, 0x7D, 0x5A, 0x3B, 0x22, 0x10, 0x05,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00} /*-6dB*/
+};
+
+#define RTW_OFDM_SWING_TABLE_SIZE	ARRAY_SIZE(rtw8703b_ofdm_swing_table)
+#define RTW_CCK_SWING_TABLE_SIZE	ARRAY_SIZE(rtw8703b_cck_swing_table)
+
+static const struct rtw_pwr_seq_cmd trans_pre_enable_8703b[] = {
+	/* set up external crystal (XTAL) */
+	{REG_PAD_CTRL1 + 2,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(7), BIT(7)},
+	/* set CLK_REQ to high active */
+	{0x0069,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), BIT(5)},
+	/* unlock ISO/CLK/power control register */
+	{REG_RSV_CTRL,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8703b[] = {
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(7), 0},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd trans_cardemu_to_carddis_8703b[] = {
+	{0x0023,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(4), BIT(4)},
+	{0x0007,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK | RTW_PWR_INTF_USB_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xFF, 0x20},
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(7), BIT(7)},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd trans_cardemu_to_act_8703b[] = {
+	{0x0020,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0067,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(4), 0},
+	{0x0001,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_DELAY, 1, RTW_PWR_DELAY_MS},
+	{0x0000,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, (BIT(4) | BIT(3) | BIT(2)), 0},
+	{0x0075,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0004,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3), BIT(3)},
+	{0x0004,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3), 0},
+	/* wait for power ready */
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, BIT(1), BIT(1)},
+	{0x0075,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_PCI_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(7), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, (BIT(4) | BIT(3)), 0},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, BIT(0), 0},
+	{0x0010,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(6), BIT(6)},
+	{0x0049,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0063,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0062,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0058,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x005A,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0068,
+	 RTW_PWR_CUT_TEST_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(3), BIT(3)},
+	{0x0069,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(6), BIT(6)},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_cardemu_8703b[] = {
+	{0x001f,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0},
+	{0x0049,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0006,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), BIT(0)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
+	{0x0005,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, BIT(1), 0},
+	{0x0010,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(6), 0},
+	{0x0000,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), BIT(5)},
+	{0x0020,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_USB_MSK | RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_reset_mcu_8703b[] = {
+	{REG_SYS_FUNC_EN + 1,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT_FEN_CPUEN, 0},
+	/* reset MCU ready */
+	{REG_MCUFW_CTRL,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0},
+	/* reset MCU IO wrapper */
+	{REG_RSV_CTRL + 1,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{REG_RSV_CTRL + 1,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 1},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd trans_act_to_lps_8703b[] = {
+	{0x0301,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0xff},
+	{0x0522,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0xff},
+	{0x05f8,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xff, 0},
+	{0x05f9,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xff, 0},
+	{0x05fa,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xff, 0},
+	{0x05fb,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_POLLING, 0xff, 0},
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(0), 0},
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_DELAY, 0, RTW_PWR_DELAY_US},
+	{0x0002,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0100,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0x03},
+	{0x0101,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), 0},
+	{0x0093,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_SDIO_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, 0xff, 0},
+	{0x0553,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(5), BIT(5)},
+	TRANS_SEQ_END,
+};
+
+static const struct rtw_pwr_seq_cmd *card_enable_flow_8703b[] = {
+	trans_pre_enable_8703b,
+	trans_carddis_to_cardemu_8703b,
+	trans_cardemu_to_act_8703b,
+	NULL
+};
+
+static const struct rtw_pwr_seq_cmd *card_disable_flow_8703b[] = {
+	trans_act_to_lps_8703b,
+	trans_act_to_reset_mcu_8703b,
+	trans_act_to_cardemu_8703b,
+	trans_cardemu_to_carddis_8703b,
+	NULL
+};
+
+static const struct rtw_rfe_def rtw8703b_rfe_defs[] = {
+	[0] = { .phy_pg_tbl	= &rtw8703b_bb_pg_tbl,
+		.txpwr_lmt_tbl	= &rtw8703b_txpwr_lmt_tbl,},
+};
+
+static const struct rtw_page_table page_table_8703b[] = {
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+	{12, 2, 2, 0, 1},
+};
+
+static const struct rtw_rqpn rqpn_table_8703b[] = {
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_HIGH,
+	 RTW_DMA_MAPPING_HIGH, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_HIGH, RTW_DMA_MAPPING_HIGH},
+	{RTW_DMA_MAPPING_NORMAL, RTW_DMA_MAPPING_NORMAL,
+	 RTW_DMA_MAPPING_LOW, RTW_DMA_MAPPING_LOW,
+	 RTW_DMA_MAPPING_EXTRA, RTW_DMA_MAPPING_HIGH},
+};
+
+/* Default power index table for RTL8703B, used if EFUSE does not
+ * contain valid data. Replaces EFUSE data from offset 0x10 (start of
+ * txpwr_idx_table).
+ */
+static const u8 rtw8703b_txpwr_idx_table[] = {
+	0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+	0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x02
+};
+
+#define RTW8703B_TXPWR_IDX_TABLE_LEN ARRAY_SIZE(rtw8703b_txpwr_idx_table)
+
+#define DBG_EFUSE_FIX(name)					     \
+	rtw_dbg(rtwdev, RTW_DBG_EFUSE, "Fixed invalid EFUSE value: " \
+		# name "=0x%x\n", rtwdev->efuse.name)
+static int rtw8703b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map)
+{
+	struct rtw_efuse *efuse = &rtwdev->efuse;
+	int ret = rtw8723x_read_efuse(rtwdev, log_map);
+
+	if (ret != 0)
+		return ret;
+
+#ifdef CONFIG_OF
+	/* Prefer MAC from DT, if available. On some devices like the
+	 * Pinephone that might be the only way to get a valid MAC.
+	 */
+	struct device_node *node = rtwdev->dev->of_node;
+
+	if (node) {
+		ret = of_get_mac_address(node, efuse->addr);
+		if (ret == 0) {
+			rtw_dbg(rtwdev, RTW_DBG_EFUSE,
+				"got wifi mac address from DT: %pM\n",
+				efuse->addr);
+		}
+	}
+#endif /* CONFIG_OF */
+
+	/* If TX power index table in EFUSE is invalid, fall back to
+	 * built-in table.
+	 */
+	u8 *pwr = (u8 *)efuse->txpwr_idx_table;
+	bool valid = false;
+
+	for (int i = 0; i < RTW8703B_TXPWR_IDX_TABLE_LEN; i++)
+		if (pwr[i] != 0xff) {
+			valid = true;
+			break;
+		}
+	if (!valid) {
+		for (int i = 0; i < RTW8703B_TXPWR_IDX_TABLE_LEN; i++)
+			pwr[i] = rtw8703b_txpwr_idx_table[i];
+		rtw_dbg(rtwdev, RTW_DBG_EFUSE,
+			"Replaced invalid EFUSE TX power index table.");
+		rtw8723x_debug_txpwr_limit(rtwdev,
+					   efuse->txpwr_idx_table, 2);
+	}
+
+	/* Override invalid antenna settings. */
+	if (efuse->bt_setting == 0xff) {
+		/* shared antenna */
+		efuse->bt_setting |= BIT(0);
+		/* RF path A */
+		efuse->bt_setting &= ~BIT(6);
+		DBG_EFUSE_FIX(bt_setting);
+	}
+
+	/* Override invalid board options: The coex code incorrectly
+	 * assumes that if bits 6 & 7 are set the board doesn't
+	 * support coex. Regd is also derived from rf_board_option and
+	 * should be 0 if there's no valid data.
+	 */
+	if (efuse->rf_board_option == 0xff) {
+		efuse->regd = 0;
+		efuse->rf_board_option &= GENMASK(5, 0);
+		DBG_EFUSE_FIX(rf_board_option);
+	}
+
+	/* Override invalid crystal cap setting, default comes from
+	 * vendor driver. Chip specific.
+	 */
+	if (efuse->crystal_cap == 0xff) {
+		efuse->crystal_cap = 0x20;
+		DBG_EFUSE_FIX(crystal_cap);
+	}
+
+	return 0;
+}
+
+static void rtw8703b_pwrtrack_init(struct rtw_dev *rtwdev)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	u8 path;
+
+	/* TODO: The vendor driver selects these using tables in
+	 * halrf_powertracking_ce.c, functions are called
+	 * get_swing_index and get_cck_swing_index. There the current
+	 * fixed values are only the defaults in case no match is
+	 * found.
+	 */
+	dm_info->default_ofdm_index = 30;
+	dm_info->default_cck_index = 20;
+
+	for (path = RF_PATH_A; path < rtwdev->hal.rf_path_num; path++) {
+		ewma_thermal_init(&dm_info->avg_thermal[path]);
+		dm_info->delta_power_index[path] = 0;
+	}
+	dm_info->pwr_trk_triggered = false;
+	dm_info->pwr_trk_init_trigger = true;
+	dm_info->thermal_meter_k = rtwdev->efuse.thermal_meter_k;
+	dm_info->txagc_remnant_cck = 0;
+	dm_info->txagc_remnant_ofdm = 0;
+}
+
+static void rtw8703b_phy_set_param(struct rtw_dev *rtwdev)
+{
+	u8 xtal_cap = rtwdev->efuse.crystal_cap & 0x3F;
+
+	/* power on BB/RF domain */
+	rtw_write16_set(rtwdev, REG_SYS_FUNC_EN,
+			BIT_FEN_EN_25_1 | BIT_FEN_BB_GLB_RST | BIT_FEN_BB_RSTB);
+	rtw_write8_set(rtwdev, REG_RF_CTRL,
+		       BIT_RF_EN | BIT_RF_RSTB | BIT_RF_SDM_RSTB);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_WLINT, RFREG_MASK, 0x0780);
+	rtw_write8(rtwdev, REG_AFE_CTRL1 + 1, 0x80);
+
+	rtw_phy_load_tables(rtwdev);
+
+	rtw_write32_clr(rtwdev, REG_RCR, BIT_RCR_ADF);
+	/* 0xff is from vendor driver, rtw8723d uses
+	 * BIT_HIQ_NO_LMT_EN_ROOT.  Comment in vendor driver: "Packet
+	 * in Hi Queue Tx immediately". I wonder if setting all bits
+	 * is really necessary.
+	 */
+	rtw_write8_set(rtwdev, REG_HIQ_NO_LMT_EN, 0xff);
+	rtw_write16_set(rtwdev, REG_AFE_CTRL_4, BIT_CK320M_AFE_EN | BIT_EN_SYN);
+
+	rtw_write32_mask(rtwdev, REG_AFE_CTRL3, BIT_MASK_XTAL,
+			 xtal_cap | (xtal_cap << 6));
+	rtw_write32_set(rtwdev, REG_FPGA0_RFMOD, BIT_CCKEN | BIT_OFDMEN);
+
+	/* Init EDCA */
+	rtw_write16(rtwdev, REG_SPEC_SIFS, WLAN_SPEC_SIFS);
+	rtw_write16(rtwdev, REG_MAC_SPEC_SIFS, WLAN_SPEC_SIFS);
+	rtw_write16(rtwdev, REG_SIFS, WLAN_SPEC_SIFS); /* CCK */
+	rtw_write16(rtwdev, REG_SIFS + 2, WLAN_SPEC_SIFS); /* OFDM */
+	/* TXOP */
+	rtw_write32(rtwdev, REG_EDCA_VO_PARAM, 0x002FA226);
+	rtw_write32(rtwdev, REG_EDCA_VI_PARAM, 0x005EA324);
+	rtw_write32(rtwdev, REG_EDCA_BE_PARAM, 0x005EA42B);
+	rtw_write32(rtwdev, REG_EDCA_BK_PARAM, 0x0000A44F);
+
+	/* Init retry */
+	rtw_write8(rtwdev, REG_ACKTO, 0x40);
+
+	/* Set up RX aggregation. sdio.c also sets DMA mode, but not
+	 * the burst parameters.
+	 */
+	rtw_write8(rtwdev, REG_RXDMA_MODE,
+		   BIT_DMA_MODE |
+		   FIELD_PREP_CONST(BIT_MASK_AGG_BURST_NUM, AGG_BURST_NUM) |
+		   FIELD_PREP_CONST(BIT_MASK_AGG_BURST_SIZE, AGG_BURST_SIZE));
+
+	/* Init beacon parameters */
+	rtw_write8(rtwdev, REG_BCN_CTRL,
+		   BIT_DIS_TSF_UDT | BIT_EN_BCN_FUNCTION | BIT_EN_TXBCN_RPT);
+	rtw_write8(rtwdev, REG_TBTT_PROHIBIT, TBTT_PROHIBIT_SETUP_TIME);
+	rtw_write8(rtwdev, REG_TBTT_PROHIBIT + 1,
+		   TBTT_PROHIBIT_HOLD_TIME_STOP_BCN & 0xFF);
+	rtw_write8(rtwdev, REG_TBTT_PROHIBIT + 2,
+		   (rtw_read8(rtwdev, REG_TBTT_PROHIBIT + 2) & 0xF0)
+		   | (TBTT_PROHIBIT_HOLD_TIME_STOP_BCN >> 8));
+
+	/* configure packet burst */
+	rtw_write8_set(rtwdev, REG_SINGLE_AMPDU_CTRL, BIT_EN_SINGLE_APMDU);
+	rtw_write8(rtwdev, REG_RX_PKT_LIMIT, WLAN_RX_PKT_LIMIT);
+	rtw_write8(rtwdev, REG_MAX_AGGR_NUM, WLAN_MAX_AGG_NR);
+	rtw_write8(rtwdev, REG_PIFS, WLAN_PIFS_VAL);
+	rtw_write8_clr(rtwdev, REG_FWHW_TXQ_CTRL, BIT_MASK_TXQ_INIT);
+	rtw_write8(rtwdev, REG_AMPDU_MAX_TIME, WLAN_AMPDU_MAX_TIME);
+
+	rtw_write8(rtwdev, REG_SLOT, WLAN_SLOT_TIME);
+	rtw_write16(rtwdev, REG_RETRY_LIMIT, WLAN_RL_VAL);
+	rtw_write32(rtwdev, REG_BAR_MODE_CTRL, WLAN_BAR_VAL);
+	rtw_write16(rtwdev, REG_ATIMWND, 0x2);
+
+	rtw_phy_init(rtwdev);
+
+	if (rtw_read32_mask(rtwdev, REG_BB_AMP, BIT_MASK_RX_LNA) != 0) {
+		rtwdev->dm_info.rx_cck_agc_report_type = 1;
+	} else {
+		rtwdev->dm_info.rx_cck_agc_report_type = 0;
+		rtw_warn(rtwdev, "unexpected cck agc report type");
+	}
+
+	rtw8723x_lck(rtwdev);
+
+	rtw_write32_mask(rtwdev, REG_OFDM0_XAAGC1, MASKBYTE0, 0x50);
+	rtw_write32_mask(rtwdev, REG_OFDM0_XAAGC1, MASKBYTE0, 0x20);
+
+	rtw8703b_pwrtrack_init(rtwdev);
+}
+
+static bool rtw8703b_check_spur_ov_thres(struct rtw_dev *rtwdev,
+					 u32 freq, u32 thres)
+{
+	bool ret = false;
+
+	rtw_write32(rtwdev, REG_ANALOG_P4, DIS_3WIRE);
+	rtw_write32(rtwdev, REG_PSDFN, freq);
+	rtw_write32(rtwdev, REG_PSDFN, START_PSD | freq);
+
+	msleep(30);
+	if (rtw_read32(rtwdev, REG_PSDRPT) >= thres)
+		ret = true;
+
+	rtw_write32(rtwdev, REG_PSDFN, freq);
+	rtw_write32(rtwdev, REG_ANALOG_P4, EN_3WIRE);
+
+	return ret;
+}
+
+static void rtw8703b_cfg_notch(struct rtw_dev *rtwdev, u8 channel, bool notch)
+{
+	if (!notch) {
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_MASK_RXDSP, 0x1f);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x0);
+		rtw_write32(rtwdev, REG_OFDM1_CSI1, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI2, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI3, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI4, 0x00000000);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x0);
+		return;
+	}
+
+	switch (channel) {
+	case 5:
+		fallthrough;
+	case 13:
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_MASK_RXDSP, 0xb);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x1);
+		rtw_write32(rtwdev, REG_OFDM1_CSI1, 0x06000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI2, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI3, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI4, 0x00000000);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x1);
+		break;
+	case 6:
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_MASK_RXDSP, 0x4);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x1);
+		rtw_write32(rtwdev, REG_OFDM1_CSI1, 0x00000600);
+		rtw_write32(rtwdev, REG_OFDM1_CSI2, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI3, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI4, 0x00000000);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x1);
+		break;
+	case 7:
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_MASK_RXDSP, 0x3);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x1);
+		rtw_write32(rtwdev, REG_OFDM1_CSI1, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI2, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI3, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI4, 0x06000000);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x1);
+		break;
+	case 8:
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_MASK_RXDSP, 0xa);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x1);
+		rtw_write32(rtwdev, REG_OFDM1_CSI1, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI2, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI3, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI4, 0x00000380);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x1);
+		break;
+	case 14:
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_MASK_RXDSP, 0x5);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x1);
+		rtw_write32(rtwdev, REG_OFDM1_CSI1, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI2, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI3, 0x00000000);
+		rtw_write32(rtwdev, REG_OFDM1_CSI4, 0x00180000);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x1);
+		break;
+	default:
+		rtw_warn(rtwdev,
+			 "Bug: Notch filter enable called for channel %u!",
+			 channel);
+		rtw_write32_mask(rtwdev, REG_OFDM0_RXDSP, BIT_EN_RXDSP, 0x0);
+		rtw_write32_mask(rtwdev, REG_OFDM1_CFOTRK, BIT_EN_CFOTRK, 0x0);
+		break;
+	}
+}
+
+static void rtw8703b_spur_cal(struct rtw_dev *rtwdev, u8 channel)
+{
+	bool notch;
+	u32 freq;
+
+	if (channel == 5) {
+		freq = FREQ_CH5;
+	} else if (channel == 6) {
+		freq = FREQ_CH6;
+	} else if (channel == 7) {
+		freq = FREQ_CH7;
+	} else if (channel == 8) {
+		freq = FREQ_CH8;
+	} else if (channel == 13) {
+		freq = FREQ_CH13;
+	} else if (channel == 14) {
+		freq = FREQ_CH14;
+	} else {
+		rtw8703b_cfg_notch(rtwdev, channel, false);
+		return;
+	}
+
+	notch = rtw8703b_check_spur_ov_thres(rtwdev, freq, SPUR_THRES);
+	rtw8703b_cfg_notch(rtwdev, channel, notch);
+}
+
+static void rtw8703b_set_channel_rf(struct rtw_dev *rtwdev, u8 channel, u8 bw)
+{
+	u32 rf_cfgch_a;
+	u32 rf_cfgch_b;
+	/* default value for 20M */
+	u32 rf_rck = 0x00000C08;
+
+	rf_cfgch_a = rtw_read_rf(rtwdev, RF_PATH_A, RF_CFGCH, RFREG_MASK);
+	rf_cfgch_b = rtw_read_rf(rtwdev, RF_PATH_B, RF_CFGCH, RFREG_MASK);
+
+	rf_cfgch_a &= ~RFCFGCH_CHANNEL_MASK;
+	rf_cfgch_b &= ~RFCFGCH_CHANNEL_MASK;
+	rf_cfgch_a |= (channel & RFCFGCH_CHANNEL_MASK);
+	rf_cfgch_b |= (channel & RFCFGCH_CHANNEL_MASK);
+
+	rf_cfgch_a &= ~RFCFGCH_BW_MASK;
+	switch (bw) {
+	case RTW_CHANNEL_WIDTH_20:
+		rf_cfgch_a |= RFCFGCH_BW_20M;
+		break;
+	case RTW_CHANNEL_WIDTH_40:
+		rf_cfgch_a |= RFCFGCH_BW_40M;
+		rf_rck = 0x00000C4C;
+		break;
+	default:
+		break;
+	}
+
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_CFGCH, RFREG_MASK, rf_cfgch_a);
+	rtw_write_rf(rtwdev, RF_PATH_B, RF_CFGCH, RFREG_MASK, rf_cfgch_b);
+
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_RCK1, RFREG_MASK, rf_rck);
+	rtw8703b_spur_cal(rtwdev, channel);
+}
+
+#define CCK_DFIR_NR_8703B 2
+static const struct rtw_backup_info cck_dfir_cfg[][CCK_DFIR_NR_8703B] = {
+	[0] = {
+		{ .len = 4, .reg = REG_CCK_TXSF2, .val = 0x5A7DA0BD },
+		{ .len = 4, .reg = REG_CCK_DBG, .val = 0x0000223B },
+	},
+	[1] = {
+		{ .len = 4, .reg = REG_CCK_TXSF2, .val = 0x00000000 },
+		{ .len = 4, .reg = REG_CCK_DBG, .val = 0x00000000 },
+	},
+};
+
+static void rtw8703b_set_channel_bb(struct rtw_dev *rtwdev, u8 channel, u8 bw,
+				    u8 primary_ch_idx)
+{
+	const struct rtw_backup_info *cck_dfir;
+	int i;
+
+	cck_dfir = channel <= 13 ? cck_dfir_cfg[0] : cck_dfir_cfg[1];
+
+	for (i = 0; i < CCK_DFIR_NR_8703B; i++, cck_dfir++)
+		rtw_write32(rtwdev, cck_dfir->reg, cck_dfir->val);
+
+	switch (bw) {
+	case RTW_CHANNEL_WIDTH_20:
+		rtw_write32_mask(rtwdev, REG_FPGA0_RFMOD, BIT_MASK_RFMOD, 0x0);
+		rtw_write32_mask(rtwdev, REG_FPGA1_RFMOD, BIT_MASK_RFMOD, 0x0);
+		rtw_write32_mask(rtwdev, REG_OFDM0_TX_PSD_NOISE,
+				 GENMASK(31, 20), 0x0);
+		rtw_write32(rtwdev, REG_BBRX_DFIR, 0x4A880000);
+		rtw_write32(rtwdev, REG_OFDM0_A_TX_AFE, 0x19F60000);
+		break;
+	case RTW_CHANNEL_WIDTH_40:
+		rtw_write32_mask(rtwdev, REG_FPGA0_RFMOD, BIT_MASK_RFMOD, 0x1);
+		rtw_write32_mask(rtwdev, REG_FPGA1_RFMOD, BIT_MASK_RFMOD, 0x1);
+		rtw_write32(rtwdev, REG_BBRX_DFIR, 0x40100000);
+		rtw_write32(rtwdev, REG_OFDM0_A_TX_AFE, 0x51F60000);
+		rtw_write32_mask(rtwdev, REG_CCK0_SYS, BIT_CCK_SIDE_BAND,
+				 (primary_ch_idx == RTW_SC_20_UPPER ? 1 : 0));
+		rtw_write32_mask(rtwdev, REG_OFDM_FA_RSTD_11N, 0xC00,
+				 primary_ch_idx == RTW_SC_20_UPPER ? 2 : 1);
+
+		rtw_write32_mask(rtwdev, REG_BB_PWR_SAV5_11N, GENMASK(27, 26),
+				 primary_ch_idx == RTW_SC_20_UPPER ? 1 : 2);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rtw8703b_set_channel(struct rtw_dev *rtwdev, u8 channel,
+				 u8 bw, u8 primary_chan_idx)
+{
+	rtw8703b_set_channel_rf(rtwdev, channel, bw);
+	rtw_set_channel_mac(rtwdev, channel, bw, primary_chan_idx);
+	rtw8703b_set_channel_bb(rtwdev, channel, bw, primary_chan_idx);
+}
+
+/* Not all indices are valid, based on available data. None of the
+ * known valid values are positive, so use 0x7f as "invalid".
+ */
+#define LNA_IDX_INVALID 0x7f
+static const s8 lna_gain_table[16] = {
+	-2, LNA_IDX_INVALID, LNA_IDX_INVALID, LNA_IDX_INVALID,
+	-6, LNA_IDX_INVALID, LNA_IDX_INVALID, -19,
+	-32, LNA_IDX_INVALID, -36, -42,
+	LNA_IDX_INVALID, LNA_IDX_INVALID, LNA_IDX_INVALID, -48,
+};
+
+static s8 get_cck_rx_pwr(struct rtw_dev *rtwdev, u8 lna_idx, u8 vga_idx)
+{
+	s8 lna_gain = 0;
+
+	if (lna_idx < ARRAY_SIZE(lna_gain_table))
+		lna_gain = lna_gain_table[lna_idx];
+
+	if (lna_gain >= 0) {
+		rtw_warn(rtwdev, "incorrect lna index (%d)\n", lna_idx);
+		return -120;
+	}
+
+	return lna_gain - 2 * vga_idx;
+}
+
+static void query_phy_status_cck(struct rtw_dev *rtwdev, u8 *phy_status,
+				 struct rtw_rx_pkt_stat *pkt_stat)
+{
+	u8 vga_idx = GET_PHY_STAT_VGA(phy_status);
+	u8 lna_idx;
+	s8 rx_power;
+
+	if (rtwdev->dm_info.rx_cck_agc_report_type == 1)
+		lna_idx = FIELD_PREP(BIT_LNA_H_MASK, GET_PHY_STAT_LNA_H(phy_status))
+			| FIELD_PREP(BIT_LNA_L_MASK, GET_PHY_STAT_LNA_L(phy_status));
+	else
+		lna_idx = FIELD_PREP(BIT_LNA_L_MASK, GET_PHY_STAT_LNA_L(phy_status));
+	rx_power = get_cck_rx_pwr(rtwdev, lna_idx, vga_idx);
+
+	pkt_stat->rx_power[RF_PATH_A] = rx_power;
+	pkt_stat->rssi = rtw_phy_rf_power_2_rssi(pkt_stat->rx_power, 1);
+	rtwdev->dm_info.rssi[RF_PATH_A] = pkt_stat->rssi;
+	pkt_stat->signal_power = rx_power;
+}
+
+static void query_phy_status_ofdm(struct rtw_dev *rtwdev, u8 *phy_status,
+				  struct rtw_rx_pkt_stat *pkt_stat)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	s8 val_s8;
+
+	val_s8 = GET_PHY_STAT_AGC_GAIN_A(phy_status) & 0x3F;
+	pkt_stat->rx_power[RF_PATH_A] = (val_s8 * 2) - 110;
+	pkt_stat->rssi = rtw_phy_rf_power_2_rssi(pkt_stat->rx_power, 1);
+	pkt_stat->rx_snr[RF_PATH_A] = GET_PHY_STAT_RXSNR_A(phy_status);
+
+	/* signal power reported by HW */
+	val_s8 = GET_PHY_STAT_PWDB(phy_status) >> 1;
+	pkt_stat->signal_power = (val_s8 & 0x7f) - 110;
+
+	pkt_stat->rx_evm[RF_PATH_A] = GET_PHY_STAT_RXEVM_A(phy_status);
+	pkt_stat->cfo_tail[RF_PATH_A] = GET_PHY_STAT_CFO_TAIL_A(phy_status);
+
+	dm_info->curr_rx_rate = pkt_stat->rate;
+	dm_info->rssi[RF_PATH_A] = pkt_stat->rssi;
+	dm_info->rx_snr[RF_PATH_A] = pkt_stat->rx_snr[RF_PATH_A] >> 1;
+	/* convert to KHz (used only for debugfs) */
+	dm_info->cfo_tail[RF_PATH_A] = (pkt_stat->cfo_tail[RF_PATH_A] * 5) >> 1;
+
+	/* (EVM value as s8 / 2) is dbm, should usually be in -33 to 0
+	 * range. rx_evm_dbm needs the absolute (positive) value.
+	 */
+	val_s8 = (s8)pkt_stat->rx_evm[RF_PATH_A];
+	val_s8 = clamp_t(s8, -val_s8 >> 1, 0, 64);
+	val_s8 &= 0x3F; /* 64->0: second path of 1SS rate is 64 */
+	dm_info->rx_evm_dbm[RF_PATH_A] = val_s8;
+}
+
+static void query_phy_status(struct rtw_dev *rtwdev, u8 *phy_status,
+			     struct rtw_rx_pkt_stat *pkt_stat)
+{
+	if (pkt_stat->rate <= DESC_RATE11M)
+		query_phy_status_cck(rtwdev, phy_status, pkt_stat);
+	else
+		query_phy_status_ofdm(rtwdev, phy_status, pkt_stat);
+}
+
+static void rtw8703b_query_rx_desc(struct rtw_dev *rtwdev, u8 *rx_desc,
+				   struct rtw_rx_pkt_stat *pkt_stat,
+				   struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_hdr *hdr;
+	u32 desc_sz = rtwdev->chip->rx_pkt_desc_sz;
+	u8 *phy_status = NULL;
+
+	memset(pkt_stat, 0, sizeof(*pkt_stat));
+
+	pkt_stat->phy_status = GET_RX_DESC_PHYST(rx_desc);
+	pkt_stat->icv_err = GET_RX_DESC_ICV_ERR(rx_desc);
+	pkt_stat->crc_err = GET_RX_DESC_CRC32(rx_desc);
+	pkt_stat->decrypted = !GET_RX_DESC_SWDEC(rx_desc) &&
+			      GET_RX_DESC_ENC_TYPE(rx_desc) != RX_DESC_ENC_NONE;
+	pkt_stat->is_c2h = GET_RX_DESC_C2H(rx_desc);
+	pkt_stat->pkt_len = GET_RX_DESC_PKT_LEN(rx_desc);
+	pkt_stat->drv_info_sz = GET_RX_DESC_DRV_INFO_SIZE(rx_desc);
+	pkt_stat->shift = GET_RX_DESC_SHIFT(rx_desc);
+	pkt_stat->rate = GET_RX_DESC_RX_RATE(rx_desc);
+	pkt_stat->cam_id = GET_RX_DESC_MACID(rx_desc);
+	pkt_stat->ppdu_cnt = 0;
+	pkt_stat->tsf_low = GET_RX_DESC_TSFL(rx_desc);
+
+	pkt_stat->drv_info_sz *= RX_DRV_INFO_SZ_UNIT_8703B;
+
+	if (pkt_stat->is_c2h)
+		return;
+
+	hdr = (struct ieee80211_hdr *)(rx_desc + desc_sz + pkt_stat->shift +
+				       pkt_stat->drv_info_sz);
+
+	pkt_stat->bw = GET_RX_DESC_BW(rx_desc);
+
+	if (pkt_stat->phy_status) {
+		phy_status = rx_desc + desc_sz + pkt_stat->shift;
+		query_phy_status(rtwdev, phy_status, pkt_stat);
+	}
+
+	rtw_rx_fill_rx_status(rtwdev, pkt_stat, hdr, rx_status, phy_status);
+
+	/* Rtl8723cs driver checks for size < 14 or size > 8192 and
+	 * simply drops the packet. Maybe this should go into
+	 * rtw_rx_fill_rx_status()?
+	 */
+	if (pkt_stat->pkt_len == 0) {
+		rx_status->flag |= RX_FLAG_NO_PSDU;
+		rtw_dbg(rtwdev, RTW_DBG_RX, "zero length packet");
+	}
+}
+
+#define ADDA_ON_VAL 0x03c00014
+
+static
+void rtw8703b_iqk_config_mac(struct rtw_dev *rtwdev,
+			     const struct rtw8723x_iqk_backup_regs *backup)
+{
+	rtw_write8(rtwdev, rtw8723x_common.iqk_mac8_regs[0], 0x3F);
+	for (int i = 1; i < RTW8723X_IQK_MAC8_REG_NUM; i++)
+		rtw_write8(rtwdev, rtw8723x_common.iqk_mac8_regs[i],
+			   backup->mac8[i] & (~BIT(3)));
+}
+
+#define IQK_LTE_WRITE_VAL 0x00007700
+#define IQK_DELAY_TIME_8703B 4
+#define IQK_DELAY_STEP 1
+
+static void rtw8703b_iqk_one_shot(struct rtw_dev *rtwdev, bool tx)
+{
+	/* enter IQK mode */
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, BIT_MASK_IQK_MOD, EN_IQK);
+	rtw8723x_iqk_config_lte_path_gnt(rtwdev, IQK_LTE_WRITE_VAL);
+
+	/* One shot, LOK & IQK */
+	rtw_write32(rtwdev, REG_IQK_AGC_PTS_11N, 0xf9000000);
+	rtw_write32(rtwdev, REG_IQK_AGC_PTS_11N, 0xf8000000);
+
+	/* This is very similar to check_hw_ready, but the exact
+	 * "done" value isn't known, just != 0
+	 */
+	mdelay(IQK_DELAY_TIME_8703B);
+	for (int wait = 0; wait < 20; wait++) {
+		mdelay(IQK_DELAY_STEP);
+		if (rtw_read32(rtwdev, REG_IQK_RDY) != 0) {
+			rtw_dbg(rtwdev, RTW_DBG_RFK,
+				"[IQK] %s done after %dms",
+				tx ? "TX" : "RX",
+				(wait + 1) * IQK_DELAY_STEP
+				+ IQK_DELAY_TIME_8703B);
+			return;
+		}
+	}
+	rtw_warn(rtwdev, "A %s IQK isn't done\n", tx ? "TX" : "RX");
+}
+
+static void rtw8703b_iqk_txrx_path_post(struct rtw_dev *rtwdev,
+					const struct rtw8723x_iqk_backup_regs *backup)
+{
+	rtw8723x_iqk_restore_lte_path_gnt(rtwdev, backup);
+	rtw_write32(rtwdev, REG_BB_SEL_BTG, backup->bb_sel_btg);
+
+	/* leave IQK mode */
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, BIT_MASK_IQK_MOD, RST_IQK);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTDBG, 0x800, 0x0);
+}
+
+static u8 rtw8703b_iqk_check_tx_failed(struct rtw_dev *rtwdev)
+{
+	s32 tx_x, tx_y;
+	u32 tx_fail;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] 0xeac = 0x%x\n",
+		rtw_read32(rtwdev, REG_IQK_RES_RY));
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] 0xe94 = 0x%x, 0xe9c = 0x%x\n",
+		rtw_read32(rtwdev, REG_IQK_RES_TX),
+		rtw_read32(rtwdev, REG_IQK_RES_TY));
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] 0xe90(before IQK) = 0x%x, 0xe98(after IQK) = 0x%x\n",
+		rtw_read32(rtwdev, REG_IQK_RDY),
+		rtw_read32(rtwdev, 0xe98));
+
+	tx_fail = rtw_read32_mask(rtwdev, REG_IQK_RES_RY, BIT_IQK_TX_FAIL);
+	tx_x = rtw_read32_mask(rtwdev, REG_IQK_RES_TX, BIT_MASK_RES_TX);
+	tx_y = rtw_read32_mask(rtwdev, REG_IQK_RES_TY, BIT_MASK_RES_TY);
+
+	if (!tx_fail && tx_x != IQK_TX_X_ERR && tx_y != IQK_TX_Y_ERR)
+		return IQK_TX_OK;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] A TX IQK failed\n");
+
+	return 0;
+}
+
+static u8 rtw8703b_iqk_check_rx_failed(struct rtw_dev *rtwdev)
+{
+	s32 rx_x, rx_y;
+	u32 rx_fail;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] 0xea4 = 0x%x, 0xeac = 0x%x\n",
+		rtw_read32(rtwdev, REG_IQK_RES_RX),
+		rtw_read32(rtwdev, REG_IQK_RES_RY));
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] 0xea0(before IQK) = 0x%x, 0xea8(after IQK) = 0x%x\n",
+		rtw_read32(rtwdev, 0xea0),
+		rtw_read32(rtwdev, 0xea8));
+
+	rx_fail = rtw_read32_mask(rtwdev, REG_IQK_RES_RY, BIT_IQK_RX_FAIL);
+	rx_x = rtw_read32_mask(rtwdev, REG_IQK_RES_RX, BIT_MASK_RES_RX);
+	rx_y = rtw_read32_mask(rtwdev, REG_IQK_RES_RY, BIT_MASK_RES_RY);
+	rx_y = abs(iqkxy_to_s32(rx_y));
+
+	if (!rx_fail && rx_x != IQK_RX_X_ERR && rx_y != IQK_RX_Y_ERR &&
+	    rx_x < IQK_RX_X_UPPER && rx_x > IQK_RX_X_LOWER &&
+	    rx_y < IQK_RX_Y_LMT)
+		return IQK_RX_OK;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] A RX IQK failed\n");
+
+	return 0;
+}
+
+static u8 rtw8703b_iqk_tx_path(struct rtw_dev *rtwdev,
+			       const struct rtw8723x_iqk_backup_regs *backup)
+{
+	u8 status;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] path A TX IQK!\n");
+
+	/* IQK setting */
+	rtw_write32(rtwdev, REG_TXIQK_11N, 0x01007c00);
+	rtw_write32(rtwdev, REG_RXIQK_11N, 0x01004800);
+	rtw_write32(rtwdev, REG_TXIQK_TONE_A_11N, 0x18008c1c);
+	rtw_write32(rtwdev, REG_RXIQK_TONE_A_11N, 0x38008c1c);
+	rtw_write32(rtwdev, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtw_write32(rtwdev, REG_RX_IQK_TONE_B, 0x38008c1c);
+	rtw_write32(rtwdev, REG_TXIQK_PI_A_11N, 0x8214030f);
+	rtw_write32(rtwdev, REG_RXIQK_PI_A_11N, 0x28110000);
+	rtw_write32(rtwdev, REG_TXIQK_PI_B, 0x82110000);
+	rtw_write32(rtwdev, REG_RXIQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtw_write32(rtwdev, REG_IQK_AGC_RSP_11N, 0x00462911);
+
+	/* leave IQK mode */
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, 0xffffff00, 0x000000);
+
+	/* PA, PAD setting */
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTDBG, 0x800, 0x1);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x55, 0x7f, 0x7);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x7f, RFREG_MASK, 0xd400);
+
+	rtw8703b_iqk_one_shot(rtwdev, true);
+	status = rtw8703b_iqk_check_tx_failed(rtwdev);
+
+	rtw8703b_iqk_txrx_path_post(rtwdev, backup);
+
+	return status;
+}
+
+static u8 rtw8703b_iqk_rx_path(struct rtw_dev *rtwdev,
+			       const struct rtw8723x_iqk_backup_regs *backup)
+{
+	u8 status;
+	u32 tx_x, tx_y;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] path A RX IQK step 1!\n");
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] 0x67 @A RX IQK1 = 0x%x\n",
+		rtw_read32_mask(rtwdev, REG_PAD_CTRL1, MASKBYTE3));
+	rtw_write32(rtwdev, REG_BB_SEL_BTG, 0x99000000);
+
+	/* disable IQC mode */
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, BIT_MASK_IQK_MOD, RST_IQK);
+
+	/* IQK setting */
+	rtw_write32(rtwdev, REG_TXIQK_11N, 0x01007c00);
+	rtw_write32(rtwdev, REG_RXIQK_11N, 0x01004800);
+
+	/* path IQK setting */
+	rtw_write32(rtwdev, REG_TXIQK_TONE_A_11N, 0x18008c1c);
+	rtw_write32(rtwdev, REG_RXIQK_TONE_A_11N, 0x38008c1c);
+	rtw_write32(rtwdev, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtw_write32(rtwdev, REG_RX_IQK_TONE_B, 0x38008c1c);
+	rtw_write32(rtwdev, REG_TXIQK_PI_A_11N, 0x8216000f);
+	rtw_write32(rtwdev, REG_RXIQK_PI_A_11N, 0x28110000);
+	rtw_write32(rtwdev, REG_TXIQK_PI_B, 0x28110000);
+	rtw_write32(rtwdev, REG_RXIQK_PI_B, 0x28110000);
+
+	/* LOK setting */
+	rtw_write32(rtwdev, REG_IQK_AGC_RSP_11N, 0x0046a911);
+
+	/* RX IQK mode */
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTWE, 0x80000, 0x1);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x30, RFREG_MASK, 0x30000);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x31, RFREG_MASK, 0x00007);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x32, RFREG_MASK, 0x57db7);
+
+	rtw8703b_iqk_one_shot(rtwdev, true);
+	/* leave IQK mode */
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, 0xffffff00, 0x000000);
+	status = rtw8703b_iqk_check_tx_failed(rtwdev);
+
+	if (!status)
+		goto restore;
+
+	/* second round */
+	tx_x = rtw_read32_mask(rtwdev, REG_IQK_RES_TX, BIT_MASK_RES_TX);
+	tx_y = rtw_read32_mask(rtwdev, REG_IQK_RES_TY, BIT_MASK_RES_TY);
+
+	rtw_write32(rtwdev, REG_TXIQK_11N, BIT_SET_TXIQK_11N(tx_x, tx_y));
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] 0xe40 = 0x%x u4tmp = 0x%x\n",
+		rtw_read32(rtwdev, REG_TXIQK_11N),
+		BIT_SET_TXIQK_11N(tx_x, tx_y));
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] path A RX IQK step 2!\n");
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] 0x67 @A RX IQK 2 = 0x%x\n",
+		rtw_read32_mask(rtwdev, REG_PAD_CTRL1, MASKBYTE3));
+
+	/* IQK setting */
+	rtw_write32(rtwdev, REG_RXIQK_11N, 0x01004800);
+	rtw_write32(rtwdev, REG_TXIQK_TONE_A_11N, 0x38008c1c);
+	rtw_write32(rtwdev, REG_RXIQK_TONE_A_11N, 0x18008c1c);
+	rtw_write32(rtwdev, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtw_write32(rtwdev, REG_RX_IQK_TONE_B, 0x38008c1c);
+	rtw_write32(rtwdev, REG_TXIQK_PI_A_11N, 0x82110000);
+	rtw_write32(rtwdev, REG_RXIQK_PI_A_11N, 0x28160c1f);
+	rtw_write32(rtwdev, REG_TXIQK_PI_B, 0x82110000);
+	rtw_write32(rtwdev, REG_RXIQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtw_write32(rtwdev, REG_IQK_AGC_RSP_11N, 0x0046a8d1);
+
+	/* leave IQK mode */
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, 0xffffff00, 0x000000);
+	/* modify RX IQK mode table */
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTWE, 0x80000, 0x1);
+	/* RF_RCK_OS, RF_TXPA_G1, RF_TXPA_G2 */
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x30, RFREG_MASK, 0x30000);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x31, RFREG_MASK, 0x00007);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x32, RFREG_MASK, 0xf7d77);
+
+	/* PA, PAD setting */
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_LUTDBG, 0x800, 0x1);
+	rtw_write_rf(rtwdev, RF_PATH_A, 0x55, 0x7f, 0x5);
+
+	rtw8703b_iqk_one_shot(rtwdev, false);
+	status |= rtw8703b_iqk_check_rx_failed(rtwdev);
+
+restore:
+	rtw8703b_iqk_txrx_path_post(rtwdev, backup);
+
+	return status;
+}
+
+static
+void rtw8703b_iqk_one_round(struct rtw_dev *rtwdev, s32 result[][IQK_NR], u8 t,
+			    const struct rtw8723x_iqk_backup_regs *backup)
+{
+	u32 i;
+	u8 a_ok;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] IQ Calibration for 1T1R_S0/S1 for %d times\n", t);
+
+	rtw8723x_iqk_path_adda_on(rtwdev, ADDA_ON_VAL);
+	rtw8703b_iqk_config_mac(rtwdev, backup);
+	rtw_write32_mask(rtwdev, REG_CCK_ANT_SEL_11N, 0x0f000000, 0xf);
+	rtw_write32(rtwdev, REG_BB_RX_PATH_11N, 0x03a05600);
+	rtw_write32(rtwdev, REG_TRMUX_11N, 0x000800e4);
+	rtw_write32(rtwdev, REG_BB_PWR_SAV1_11N, 0x25204000);
+
+	for (i = 0; i < PATH_IQK_RETRY; i++) {
+		a_ok = rtw8703b_iqk_tx_path(rtwdev, backup);
+		if (a_ok == IQK_TX_OK) {
+			rtw_dbg(rtwdev, RTW_DBG_RFK,
+				"[IQK] path A TX IQK success!\n");
+			result[t][IQK_S1_TX_X] =
+				rtw_read32_mask(rtwdev, REG_IQK_RES_TX,
+						BIT_MASK_RES_TX);
+			result[t][IQK_S1_TX_Y] =
+				rtw_read32_mask(rtwdev, REG_IQK_RES_TY,
+						BIT_MASK_RES_TY);
+			break;
+		}
+
+		rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] path A TX IQK fail!\n");
+		result[t][IQK_S1_TX_X] = 0x100;
+		result[t][IQK_S1_TX_Y] = 0x0;
+	}
+
+	for (i = 0; i < PATH_IQK_RETRY; i++) {
+		a_ok = rtw8703b_iqk_rx_path(rtwdev, backup);
+		if (a_ok == (IQK_TX_OK | IQK_RX_OK)) {
+			rtw_dbg(rtwdev, RTW_DBG_RFK,
+				"[IQK] path A RX IQK success!\n");
+			result[t][IQK_S1_RX_X] =
+				rtw_read32_mask(rtwdev, REG_IQK_RES_RX,
+						BIT_MASK_RES_RX);
+			result[t][IQK_S1_RX_Y] =
+				rtw_read32_mask(rtwdev, REG_IQK_RES_RY,
+						BIT_MASK_RES_RY);
+			break;
+		}
+
+		rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] path A RX IQK fail!\n");
+		result[t][IQK_S1_RX_X] = 0x100;
+		result[t][IQK_S1_RX_Y] = 0x0;
+	}
+
+	if (a_ok == 0x0)
+		rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] path A IQK fail!\n");
+
+	rtw_write32_mask(rtwdev, REG_FPGA0_IQK_11N, BIT_MASK_IQK_MOD, RST_IQK);
+	mdelay(1);
+}
+
+static
+void rtw8703b_iqk_fill_a_matrix(struct rtw_dev *rtwdev, const s32 result[])
+{
+	s32 oldval_1;
+	s32 x, y;
+	s32 tx1_a, tx1_a_ext;
+	s32 tx1_c, tx1_c_ext;
+	u32 tmp_rx_iqi = 0x40000100 & GENMASK(31, 16);
+
+	if (result[IQK_S1_TX_X] == 0)
+		return;
+
+	oldval_1 = rtw_read32_mask(rtwdev, REG_OFDM_0_XA_TX_IQ_IMBALANCE,
+				   BIT_MASK_TXIQ_ELM_D);
+
+	x = iqkxy_to_s32(result[IQK_S1_TX_X]);
+	tx1_a = iqk_mult(x, oldval_1, &tx1_a_ext);
+	rtw_write32_mask(rtwdev, REG_OFDM_0_XA_TX_IQ_IMBALANCE,
+			 BIT_MASK_TXIQ_ELM_A, tx1_a);
+	rtw_write32_mask(rtwdev, REG_OFDM_0_ECCA_THRESHOLD,
+			 BIT_MASK_OFDM0_EXT_A, tx1_a_ext);
+
+	y = iqkxy_to_s32(result[IQK_S1_TX_Y]);
+	tx1_c = iqk_mult(y, oldval_1, &tx1_c_ext);
+	rtw_write32_mask(rtwdev, REG_TXIQK_MATRIXA_LSB2_11N, MASKH4BITS,
+			 BIT_SET_TXIQ_ELM_C1(tx1_c));
+	rtw_write32_mask(rtwdev, REG_OFDM_0_XA_TX_IQ_IMBALANCE,
+			 BIT_MASK_TXIQ_ELM_C, BIT_SET_TXIQ_ELM_C2(tx1_c));
+	rtw_write32_mask(rtwdev, REG_OFDM_0_ECCA_THRESHOLD,
+			 BIT_MASK_OFDM0_EXT_C, tx1_c_ext);
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] X = 0x%x, TX1_A = 0x%x, oldval_1 0x%x\n",
+		x, tx1_a, oldval_1);
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] Y = 0x%x, TX1_C = 0x%x\n", y, tx1_c);
+
+	if (result[IQK_S1_RX_X] == 0)
+		return;
+
+	tmp_rx_iqi |= FIELD_PREP(BIT_MASK_RXIQ_S1_X, result[IQK_S1_RX_X]);
+	tmp_rx_iqi |= FIELD_PREP(BIT_MASK_RXIQ_S1_Y1, result[IQK_S1_RX_X]);
+	rtw_write32(rtwdev, REG_A_RXIQI, tmp_rx_iqi);
+	rtw_write32_mask(rtwdev, REG_RXIQK_MATRIX_LSB_11N, BIT_MASK_RXIQ_S1_Y2,
+			 BIT_SET_RXIQ_S1_Y2(result[IQK_S1_RX_Y]));
+}
+
+static void rtw8703b_phy_calibration(struct rtw_dev *rtwdev)
+{
+	/* For some reason path A is called S1 and B S0 in shared
+	 * rtw88 calibration data.
+	 */
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	s32 result[IQK_ROUND_SIZE][IQK_NR];
+	struct rtw8723x_iqk_backup_regs backup;
+	u8 i, j;
+	u8 final_candidate = IQK_ROUND_INVALID;
+	bool good;
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] Start!\n");
+
+	memset(result, 0, sizeof(result));
+
+	rtw8723x_iqk_backup_path_ctrl(rtwdev, &backup);
+	rtw8723x_iqk_backup_lte_path_gnt(rtwdev, &backup);
+	rtw8723x_iqk_backup_regs(rtwdev, &backup);
+
+	for (i = IQK_ROUND_0; i <= IQK_ROUND_2; i++) {
+		rtw8723x_iqk_config_path_ctrl(rtwdev);
+		rtw8723x_iqk_config_lte_path_gnt(rtwdev, IQK_LTE_WRITE_VAL);
+
+		rtw8703b_iqk_one_round(rtwdev, result, i, &backup);
+
+		rtw_dbg(rtwdev, RTW_DBG_RFK,
+			"[IQK] back to BB mode, load original values!\n");
+		if (i > IQK_ROUND_0)
+			rtw8723x_iqk_restore_regs(rtwdev, &backup);
+		rtw8723x_iqk_restore_lte_path_gnt(rtwdev, &backup);
+		rtw8723x_iqk_restore_path_ctrl(rtwdev, &backup);
+
+		for (j = IQK_ROUND_0; j < i; j++) {
+			good = rtw8723x_iqk_similarity_cmp(rtwdev, result, j, i);
+
+			if (good) {
+				final_candidate = j;
+				rtw_dbg(rtwdev, RTW_DBG_RFK,
+					"[IQK] cmp %d:%d final_candidate is %x\n",
+					j, i, final_candidate);
+				goto iqk_done;
+			}
+		}
+	}
+
+	if (final_candidate == IQK_ROUND_INVALID) {
+		s32 reg_tmp = 0;
+
+		for (i = 0; i < IQK_NR; i++)
+			reg_tmp += result[IQK_ROUND_HYBRID][i];
+
+		if (reg_tmp != 0) {
+			final_candidate = IQK_ROUND_HYBRID;
+		} else {
+			WARN(1, "IQK failed\n");
+			goto out;
+		}
+	}
+
+iqk_done:
+	/* only path A is calibrated in rtl8703b */
+	rtw8703b_iqk_fill_a_matrix(rtwdev, result[final_candidate]);
+
+	dm_info->iqk.result.s1_x = result[final_candidate][IQK_S1_TX_X];
+	dm_info->iqk.result.s1_y = result[final_candidate][IQK_S1_TX_Y];
+	dm_info->iqk.result.s0_x = result[final_candidate][IQK_S0_TX_X];
+	dm_info->iqk.result.s0_y = result[final_candidate][IQK_S0_TX_Y];
+	dm_info->iqk.done = true;
+
+out:
+	rtw_write32(rtwdev, REG_BB_SEL_BTG, backup.bb_sel_btg);
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] final_candidate is %x\n",
+		final_candidate);
+
+	for (i = IQK_ROUND_0; i < IQK_ROUND_SIZE; i++)
+		rtw_dbg(rtwdev, RTW_DBG_RFK,
+			"[IQK] Result %u: rege94_s1=%x rege9c_s1=%x regea4_s1=%x regeac_s1=%x rege94_s0=%x rege9c_s0=%x regea4_s0=%x regeac_s0=%x %s\n",
+			i,
+			result[i][0], result[i][1], result[i][2], result[i][3],
+			result[i][4], result[i][5], result[i][6], result[i][7],
+			final_candidate == i ? "(final candidate)" : "");
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] 0xc80 = 0x%x 0xc94 = 0x%x 0xc14 = 0x%x 0xca0 = 0x%x\n",
+		rtw_read32(rtwdev, REG_OFDM_0_XA_TX_IQ_IMBALANCE),
+		rtw_read32(rtwdev, REG_TXIQK_MATRIXA_LSB2_11N),
+		rtw_read32(rtwdev, REG_A_RXIQI),
+		rtw_read32(rtwdev, REG_RXIQK_MATRIX_LSB_11N));
+	rtw_dbg(rtwdev, RTW_DBG_RFK,
+		"[IQK] 0xcd0 = 0x%x 0xcd4 = 0x%x 0xcd8 = 0x%x\n",
+		rtw_read32(rtwdev, REG_TXIQ_AB_S0),
+		rtw_read32(rtwdev, REG_TXIQ_CD_S0),
+		rtw_read32(rtwdev, REG_RXIQ_AB_S0));
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "[IQK] Finished.\n");
+}
+
+static void rtw8703b_set_iqk_matrix_by_result(struct rtw_dev *rtwdev,
+					      u32 ofdm_swing, u8 rf_path)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	s32 ele_A, ele_D, ele_C;
+	s32 ele_A_ext, ele_C_ext, ele_D_ext;
+	s32 iqk_result_x;
+	s32 iqk_result_y;
+	s32 value32;
+
+	switch (rf_path) {
+	default:
+	case RF_PATH_A:
+		iqk_result_x = dm_info->iqk.result.s1_x;
+		iqk_result_y = dm_info->iqk.result.s1_y;
+		break;
+	case RF_PATH_B:
+		iqk_result_x = dm_info->iqk.result.s0_x;
+		iqk_result_y = dm_info->iqk.result.s0_y;
+		break;
+	}
+
+	/* new element D */
+	ele_D = OFDM_SWING_D(ofdm_swing);
+	iqk_mult(iqk_result_x, ele_D, &ele_D_ext);
+	/* new element A */
+	iqk_result_x = iqkxy_to_s32(iqk_result_x);
+	ele_A = iqk_mult(iqk_result_x, ele_D, &ele_A_ext);
+	/* new element C */
+	iqk_result_y = iqkxy_to_s32(iqk_result_y);
+	ele_C = iqk_mult(iqk_result_y, ele_D, &ele_C_ext);
+
+	switch (rf_path) {
+	case RF_PATH_A:
+	default:
+		/* write new elements A, C, D, and element B is always 0 */
+		value32 = BIT_SET_TXIQ_ELM_ACD(ele_A, ele_C, ele_D);
+		rtw_write32(rtwdev, REG_OFDM_0_XA_TX_IQ_IMBALANCE, value32);
+		value32 = BIT_SET_TXIQ_ELM_C1(ele_C);
+		rtw_write32_mask(rtwdev, REG_TXIQK_MATRIXA_LSB2_11N, MASKH4BITS,
+				 value32);
+		value32 = rtw_read32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD);
+		value32 &= ~BIT_MASK_OFDM0_EXTS;
+		value32 |= BIT_SET_OFDM0_EXTS(ele_A_ext, ele_C_ext, ele_D_ext);
+		rtw_write32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD, value32);
+		break;
+
+	case RF_PATH_B:
+		/* write new elements A, C, D, and element B is always 0 */
+		value32 = BIT_SET_TXIQ_ELM_ACD(ele_A, ele_C, ele_D);
+		rtw_write32(rtwdev, REG_OFDM_0_XB_TX_IQ_IMBALANCE, value32);
+		value32 = BIT_SET_TXIQ_ELM_C1(ele_C);
+		rtw_write32_mask(rtwdev, REG_TXIQK_MATRIXB_LSB2_11N, MASKH4BITS,
+				 value32);
+		value32 = rtw_read32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD);
+		value32 &= ~BIT_MASK_OFDM0_EXTS_B;
+		value32 |= BIT_SET_OFDM0_EXTS_B(ele_A_ext, ele_C_ext, ele_D_ext);
+		rtw_write32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD, value32);
+		break;
+	}
+}
+
+static void rtw8703b_set_iqk_matrix(struct rtw_dev *rtwdev, s8 ofdm_index,
+				    u8 rf_path)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	s32 value32;
+	u32 ofdm_swing;
+
+	ofdm_index = clamp_t(s8, ofdm_index, 0, RTW_OFDM_SWING_TABLE_SIZE - 1);
+
+	ofdm_swing = rtw8703b_ofdm_swing_table[ofdm_index];
+
+	if (dm_info->iqk.done) {
+		rtw8703b_set_iqk_matrix_by_result(rtwdev, ofdm_swing, rf_path);
+		return;
+	}
+
+	switch (rf_path) {
+	case RF_PATH_A:
+	default:
+		rtw_write32(rtwdev, REG_OFDM_0_XA_TX_IQ_IMBALANCE, ofdm_swing);
+		rtw_write32_mask(rtwdev, REG_TXIQK_MATRIXA_LSB2_11N, MASKH4BITS,
+				 0x00);
+
+		value32 = rtw_read32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD);
+		value32 &= ~BIT_MASK_OFDM0_EXTS;
+		rtw_write32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD, value32);
+		break;
+
+	case RF_PATH_B:
+		rtw_write32(rtwdev, REG_OFDM_0_XB_TX_IQ_IMBALANCE, ofdm_swing);
+		rtw_write32_mask(rtwdev, REG_TXIQK_MATRIXB_LSB2_11N, MASKH4BITS,
+				 0x00);
+
+		value32 = rtw_read32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD);
+		value32 &= ~BIT_MASK_OFDM0_EXTS_B;
+		rtw_write32(rtwdev, REG_OFDM_0_ECCA_THRESHOLD, value32);
+		break;
+	}
+}
+
+static void rtw8703b_pwrtrack_set_ofdm_pwr(struct rtw_dev *rtwdev, s8 swing_idx,
+					   s8 txagc_idx)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+
+	dm_info->txagc_remnant_ofdm = txagc_idx;
+
+	/* Only path A is calibrated for rtl8703b */
+	rtw8703b_set_iqk_matrix(rtwdev, swing_idx, RF_PATH_A);
+}
+
+static void rtw8703b_pwrtrack_set_cck_pwr(struct rtw_dev *rtwdev, s8 swing_idx,
+					  s8 txagc_idx)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+
+	dm_info->txagc_remnant_cck = txagc_idx;
+
+	swing_idx = clamp_t(s8, swing_idx, 0, RTW_CCK_SWING_TABLE_SIZE - 1);
+
+	BUILD_BUG_ON(ARRAY_SIZE(rtw8703b_cck_pwr_regs)
+		     != ARRAY_SIZE(rtw8703b_cck_swing_table[0]));
+
+	for (int i = 0; i < ARRAY_SIZE(rtw8703b_cck_pwr_regs); i++)
+		rtw_write8(rtwdev, rtw8703b_cck_pwr_regs[i],
+			   rtw8703b_cck_swing_table[swing_idx][i]);
+}
+
+static void rtw8703b_pwrtrack_set(struct rtw_dev *rtwdev, u8 path)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	struct rtw_hal *hal = &rtwdev->hal;
+	u8 limit_ofdm;
+	u8 limit_cck = 21;
+	s8 final_ofdm_swing_index;
+	s8 final_cck_swing_index;
+
+	limit_ofdm = rtw8723x_pwrtrack_get_limit_ofdm(rtwdev);
+
+	final_ofdm_swing_index = dm_info->default_ofdm_index +
+				 dm_info->delta_power_index[path];
+	final_cck_swing_index = dm_info->default_cck_index +
+				dm_info->delta_power_index[path];
+
+	if (final_ofdm_swing_index > limit_ofdm)
+		rtw8703b_pwrtrack_set_ofdm_pwr(rtwdev, limit_ofdm,
+					       final_ofdm_swing_index - limit_ofdm);
+	else if (final_ofdm_swing_index < 0)
+		rtw8703b_pwrtrack_set_ofdm_pwr(rtwdev, 0,
+					       final_ofdm_swing_index);
+	else
+		rtw8703b_pwrtrack_set_ofdm_pwr(rtwdev, final_ofdm_swing_index, 0);
+
+	if (final_cck_swing_index > limit_cck)
+		rtw8703b_pwrtrack_set_cck_pwr(rtwdev, limit_cck,
+					      final_cck_swing_index - limit_cck);
+	else if (final_cck_swing_index < 0)
+		rtw8703b_pwrtrack_set_cck_pwr(rtwdev, 0,
+					      final_cck_swing_index);
+	else
+		rtw8703b_pwrtrack_set_cck_pwr(rtwdev, final_cck_swing_index, 0);
+
+	rtw_phy_set_tx_power_level(rtwdev, hal->current_channel);
+}
+
+static void rtw8703b_phy_pwrtrack(struct rtw_dev *rtwdev)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	struct rtw_swing_table swing_table;
+	u8 thermal_value, delta, path;
+	bool do_iqk = false;
+
+	rtw_phy_config_swing_table(rtwdev, &swing_table);
+
+	if (rtwdev->efuse.thermal_meter[0] == 0xff)
+		return;
+
+	thermal_value = rtw_read_rf(rtwdev, RF_PATH_A, RF_T_METER, 0xfc00);
+
+	rtw_phy_pwrtrack_avg(rtwdev, thermal_value, RF_PATH_A);
+
+	do_iqk = rtw_phy_pwrtrack_need_iqk(rtwdev);
+
+	if (do_iqk)
+		rtw8723x_lck(rtwdev);
+
+	if (dm_info->pwr_trk_init_trigger)
+		dm_info->pwr_trk_init_trigger = false;
+	else if (!rtw_phy_pwrtrack_thermal_changed(rtwdev, thermal_value,
+						   RF_PATH_A))
+		goto iqk;
+
+	delta = rtw_phy_pwrtrack_get_delta(rtwdev, RF_PATH_A);
+
+	delta = min_t(u8, delta, RTW_PWR_TRK_TBL_SZ - 1);
+
+	for (path = 0; path < rtwdev->hal.rf_path_num; path++) {
+		s8 delta_cur, delta_last;
+
+		delta_last = dm_info->delta_power_index[path];
+		delta_cur = rtw_phy_pwrtrack_get_pwridx(rtwdev, &swing_table,
+							path, RF_PATH_A, delta);
+		if (delta_last == delta_cur)
+			continue;
+
+		dm_info->delta_power_index[path] = delta_cur;
+		rtw8703b_pwrtrack_set(rtwdev, path);
+	}
+
+	rtw8723x_pwrtrack_set_xtal(rtwdev, RF_PATH_A, delta);
+
+iqk:
+	if (do_iqk)
+		rtw8703b_phy_calibration(rtwdev);
+}
+
+static void rtw8703b_pwr_track(struct rtw_dev *rtwdev)
+{
+	struct rtw_efuse *efuse = &rtwdev->efuse;
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+
+	if (efuse->power_track_type != 0) {
+		rtw_warn(rtwdev, "unsupported power track type");
+		return;
+	}
+
+	if (!dm_info->pwr_trk_triggered) {
+		rtw_write_rf(rtwdev, RF_PATH_A, RF_T_METER,
+			     GENMASK(17, 16), 0x03);
+		dm_info->pwr_trk_triggered = true;
+		return;
+	}
+
+	rtw8703b_phy_pwrtrack(rtwdev);
+	dm_info->pwr_trk_triggered = false;
+}
+
+static void rtw8703b_coex_set_gnt_fix(struct rtw_dev *rtwdev)
+{
+}
+
+static void rtw8703b_coex_set_gnt_debug(struct rtw_dev *rtwdev)
+{
+}
+
+static void rtw8703b_coex_set_rfe_type(struct rtw_dev *rtwdev)
+{
+	struct rtw_coex *coex = &rtwdev->coex;
+	struct rtw_coex_rfe *coex_rfe = &coex->rfe;
+
+	coex_rfe->rfe_module_type = rtwdev->efuse.rfe_option;
+	coex_rfe->ant_switch_polarity = 0;
+	coex_rfe->ant_switch_exist = false;
+	coex_rfe->ant_switch_with_bt = false;
+	coex_rfe->ant_switch_diversity = false;
+	coex_rfe->wlg_at_btg = true;
+
+	/* disable LTE coex on wifi side */
+	rtw_coex_write_indirect_reg(rtwdev, LTE_COEX_CTRL, BIT_LTE_COEX_EN, 0x0);
+	rtw_coex_write_indirect_reg(rtwdev, LTE_WL_TRX_CTRL, MASKLWORD, 0xffff);
+	rtw_coex_write_indirect_reg(rtwdev, LTE_BT_TRX_CTRL, MASKLWORD, 0xffff);
+}
+
+static void rtw8703b_coex_set_wl_tx_power(struct rtw_dev *rtwdev, u8 wl_pwr)
+{
+}
+
+static void rtw8703b_coex_set_wl_rx_gain(struct rtw_dev *rtwdev, bool low_gain)
+{
+}
+
+static const u8 rtw8703b_pwrtrk_2gb_n[] = {
+	0, 0, 1, 2, 2, 3, 3, 4, 4, 4, 4, 5, 5, 6, 6,
+	7, 7, 7, 7, 8, 8, 9, 9, 10, 10, 10, 11, 11, 11, 11
+};
+
+static const u8 rtw8703b_pwrtrk_2gb_p[] = {
+	0, 1, 2, 3, 3, 4, 4, 4, 4, 5, 5, 6, 7, 7, 7,
+	8, 8, 9, 9, 10, 10, 11, 11, 12, 13, 13, 14, 14, 15, 15
+};
+
+static const u8 rtw8703b_pwrtrk_2ga_n[] = {
+	0, 0, 1, 2, 2, 3, 3, 4, 4, 4, 4, 5, 5, 6, 6,
+	7, 7, 7, 7, 8, 8, 9, 9, 10, 10, 10, 11, 11, 11, 11
+};
+
+static const u8 rtw8703b_pwrtrk_2ga_p[] = {
+	0, 1, 2, 3, 3, 4, 4, 4, 4, 5, 5, 6, 7, 7, 7,
+	8, 8, 9, 9, 10, 10, 11, 11, 12, 13, 13, 14, 14, 15, 15
+};
+
+static const u8 rtw8703b_pwrtrk_2g_cck_b_n[] = {
+	0, 0, 1, 2, 2, 3, 3, 4, 4, 4, 4, 5, 5, 6, 6,
+	7, 7, 7, 7, 8, 8, 9, 9, 10, 10, 10, 11, 11, 11, 11
+};
+
+static const u8 rtw8703b_pwrtrk_2g_cck_b_p[] = {
+	0, 0, 1, 1, 2, 3, 3, 3, 4, 4, 4, 5, 6, 6, 6,
+	7, 7, 8, 8, 8, 9, 10, 10, 10, 11, 11, 12, 12, 13, 13
+};
+
+static const u8 rtw8703b_pwrtrk_2g_cck_a_n[] = {
+	0, 0, 1, 2, 2, 3, 3, 4, 4, 4, 4, 5, 5, 6, 6,
+	7, 7, 7, 7, 8, 8, 9, 9, 10, 10, 10, 11, 11, 11, 11
+};
+
+static const u8 rtw8703b_pwrtrk_2g_cck_a_p[] = {
+	0, 0, 1, 1, 2, 3, 3, 3, 4, 4, 4, 5, 6, 6, 6,
+	7, 7, 8, 8, 8, 9, 10, 10, 10, 11, 11, 12, 12, 13, 13
+};
+
+static const s8 rtw8703b_pwrtrk_xtal_n[] = {
+	0, 0, 0, -1, -1, -1, -1, -2, -2, -2, -3, -3, -3, -3, -3,
+	-4, -2, -2, -1, -1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1
+};
+
+static const s8 rtw8703b_pwrtrk_xtal_p[] = {
+	0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 1, 0, -1, -1, -1,
+	-2, -3, -7, -9, -10, -11, -14, -16, -18, -20, -22, -24, -26, -28, -30
+};
+
+static const struct rtw_pwr_track_tbl rtw8703b_rtw_pwr_track_tbl = {
+	.pwrtrk_2gb_n = rtw8703b_pwrtrk_2gb_n,
+	.pwrtrk_2gb_p = rtw8703b_pwrtrk_2gb_p,
+	.pwrtrk_2ga_n = rtw8703b_pwrtrk_2ga_n,
+	.pwrtrk_2ga_p = rtw8703b_pwrtrk_2ga_p,
+	.pwrtrk_2g_cckb_n = rtw8703b_pwrtrk_2g_cck_b_n,
+	.pwrtrk_2g_cckb_p = rtw8703b_pwrtrk_2g_cck_b_p,
+	.pwrtrk_2g_ccka_n = rtw8703b_pwrtrk_2g_cck_a_n,
+	.pwrtrk_2g_ccka_p = rtw8703b_pwrtrk_2g_cck_a_p,
+	.pwrtrk_xtal_n = rtw8703b_pwrtrk_xtal_n,
+	.pwrtrk_xtal_p = rtw8703b_pwrtrk_xtal_p,
+};
+
+/* Shared-Antenna Coex Table */
+static const struct coex_table_para table_sant_8703b[] = {
+	{0xffffffff, 0xffffffff}, /* case-0 */
+	{0x55555555, 0x55555555},
+	{0x66555555, 0x66555555},
+	{0xaaaaaaaa, 0xaaaaaaaa},
+	{0x5a5a5a5a, 0x5a5a5a5a},
+	{0xfafafafa, 0xfafafafa}, /* case-5 */
+	{0x6a5a5555, 0xaaaaaaaa},
+	{0x6a5a56aa, 0x6a5a56aa},
+	{0x6a5a5a5a, 0x6a5a5a5a},
+	{0x66555555, 0x5a5a5a5a},
+	{0x66555555, 0x6a5a5a5a}, /* case-10 */
+	{0x66555555, 0x6a5a5aaa},
+	{0x66555555, 0x5a5a5aaa},
+	{0x66555555, 0x6aaa5aaa},
+	{0x66555555, 0xaaaa5aaa},
+	{0x66555555, 0xaaaaaaaa}, /* case-15 */
+	{0xffff55ff, 0xfafafafa},
+	{0xffff55ff, 0x6afa5afa},
+	{0xaaffffaa, 0xfafafafa},
+	{0xaa5555aa, 0x5a5a5a5a},
+	{0xaa5555aa, 0x6a5a5a5a}, /* case-20 */
+	{0xaa5555aa, 0xaaaaaaaa},
+	{0xffffffff, 0x5a5a5a5a},
+	{0xffffffff, 0x5a5a5a5a},
+	{0xffffffff, 0x55555555},
+	{0xffffffff, 0x5a5a5aaa}, /* case-25 */
+	{0x55555555, 0x5a5a5a5a},
+	{0x55555555, 0xaaaaaaaa},
+	{0x55555555, 0x6a5a6a5a},
+	{0x66556655, 0x66556655},
+	{0x66556aaa, 0x6a5a6aaa}, /* case-30 */
+	{0xffffffff, 0x5aaa5aaa},
+	{0x56555555, 0x5a5a5aaa},
+};
+
+/* Shared-Antenna TDMA */
+static const struct coex_tdma_para tdma_sant_8703b[] = {
+	{ {0x00, 0x00, 0x00, 0x00, 0x00} }, /* case-0 */
+	{ {0x61, 0x45, 0x03, 0x11, 0x11} }, /* case-1 */
+	{ {0x61, 0x3a, 0x03, 0x11, 0x11} },
+	{ {0x61, 0x30, 0x03, 0x11, 0x11} },
+	{ {0x61, 0x20, 0x03, 0x11, 0x11} },
+	{ {0x61, 0x10, 0x03, 0x11, 0x11} }, /* case-5 */
+	{ {0x61, 0x45, 0x03, 0x11, 0x10} },
+	{ {0x61, 0x3a, 0x03, 0x11, 0x10} },
+	{ {0x61, 0x30, 0x03, 0x11, 0x10} },
+	{ {0x61, 0x20, 0x03, 0x11, 0x10} },
+	{ {0x61, 0x10, 0x03, 0x11, 0x10} }, /* case-10 */
+	{ {0x61, 0x08, 0x03, 0x11, 0x14} },
+	{ {0x61, 0x08, 0x03, 0x10, 0x14} },
+	{ {0x51, 0x08, 0x03, 0x10, 0x54} },
+	{ {0x51, 0x08, 0x03, 0x10, 0x55} },
+	{ {0x51, 0x08, 0x07, 0x10, 0x54} }, /* case-15 */
+	{ {0x51, 0x45, 0x03, 0x10, 0x50} },
+	{ {0x51, 0x3a, 0x03, 0x10, 0x50} },
+	{ {0x51, 0x30, 0x03, 0x10, 0x50} },
+	{ {0x51, 0x20, 0x03, 0x10, 0x50} },
+	{ {0x51, 0x10, 0x03, 0x10, 0x50} }, /* case-20 */
+	{ {0x51, 0x4a, 0x03, 0x10, 0x50} },
+	{ {0x51, 0x0c, 0x03, 0x10, 0x54} },
+	{ {0x55, 0x08, 0x03, 0x10, 0x54} },
+	{ {0x65, 0x10, 0x03, 0x11, 0x10} },
+	{ {0x51, 0x10, 0x03, 0x10, 0x51} }, /* case-25 */
+	{ {0x51, 0x08, 0x03, 0x10, 0x50} },
+	{ {0x61, 0x08, 0x03, 0x11, 0x11} },
+};
+
+static struct rtw_chip_ops rtw8703b_ops = {
+	.mac_init		= rtw8723x_mac_init,
+	.dump_fw_crash		= NULL,
+	.shutdown		= NULL,
+	.read_efuse		= rtw8703b_read_efuse,
+	.phy_set_param		= rtw8703b_phy_set_param,
+	.set_channel		= rtw8703b_set_channel,
+	.query_rx_desc		= rtw8703b_query_rx_desc,
+	.read_rf		= rtw_phy_read_rf_sipi,
+	.write_rf		= rtw_phy_write_rf_reg_sipi,
+	.set_tx_power_index	= rtw8723x_set_tx_power_index,
+	.set_antenna		= NULL,
+	.cfg_ldo25		= rtw8723x_cfg_ldo25,
+	.efuse_grant		= rtw8723x_efuse_grant,
+	.false_alarm_statistics	= rtw8723x_false_alarm_statistics,
+	.phy_calibration	= rtw8703b_phy_calibration,
+	.dpk_track		= NULL,
+	/* 8723d uses REG_CSRATIO to set dm_info.cck_pd_default, which
+	 * is used in its cck_pd_set function. According to comments
+	 * in the vendor driver code it doesn't exist in this chip
+	 * generation, only 0xa0a ("ODM_CCK_PD_THRESH", which is only
+	 * *written* to).
+	 */
+	.cck_pd_set		= NULL,
+	.pwr_track		= rtw8703b_pwr_track,
+	.config_bfee		= NULL,
+	.set_gid_table		= NULL,
+	.cfg_csi_rate		= NULL,
+	.adaptivity_init	= NULL,
+	.adaptivity		= NULL,
+	.cfo_init		= NULL,
+	.cfo_track		= NULL,
+	.config_tx_path		= NULL,
+	.config_txrx_mode	= NULL,
+	.fill_txdesc_checksum	= rtw8723x_fill_txdesc_checksum,
+
+	/* for coex */
+	.coex_set_init		= rtw8723x_coex_cfg_init,
+	.coex_set_ant_switch	= NULL,
+	.coex_set_gnt_fix	= rtw8703b_coex_set_gnt_fix,
+	.coex_set_gnt_debug	= rtw8703b_coex_set_gnt_debug,
+	.coex_set_rfe_type	= rtw8703b_coex_set_rfe_type,
+	.coex_set_wl_tx_power	= rtw8703b_coex_set_wl_tx_power,
+	.coex_set_wl_rx_gain	= rtw8703b_coex_set_wl_rx_gain,
+};
+
+const struct rtw_chip_info rtw8703b_hw_spec = {
+	.ops = &rtw8703b_ops,
+	.id = RTW_CHIP_TYPE_8703B,
+
+	.fw_name = "rtw88/rtw8703b_fw.bin",
+	.wlan_cpu = RTW_WCPU_11N,
+	.tx_pkt_desc_sz = 40,
+	.tx_buf_desc_sz = 16,
+	.rx_pkt_desc_sz = 24,
+	.rx_buf_desc_sz = 8,
+	.phy_efuse_size = 256,
+	.log_efuse_size = 512,
+	.ptct_efuse_size = 15,
+	.txff_size = 32768,
+	.rxff_size = 16384,
+	.rsvd_drv_pg_num = 8,
+	.band = RTW_BAND_2G,
+	.page_size = TX_PAGE_SIZE,
+	.csi_buf_pg_num = 0,
+	.dig_min = 0x20,
+	.txgi_factor = 1,
+	.is_pwr_by_rate_dec = true,
+	.rx_ldpc = false,
+	.tx_stbc = false,
+	.max_power_index = 0x3f,
+	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
+
+	.path_div_supported = false,
+	.ht_supported = true,
+	.vht_supported = false,
+	.lps_deep_mode_supported = 0,
+
+	.sys_func_en = 0xFD,
+	.pwr_on_seq = card_enable_flow_8703b,
+	.pwr_off_seq = card_disable_flow_8703b,
+	.rqpn_table = rqpn_table_8703b,
+	.prioq_addrs = &rtw8723x_common.prioq_addrs,
+	.page_table = page_table_8703b,
+	/* used only in pci.c, not needed for SDIO devices */
+	.intf_table = NULL,
+
+	.dig = rtw8723x_common.dig,
+	.dig_cck = rtw8723x_common.dig_cck,
+
+	.rf_sipi_addr = {0x840, 0x844},
+	.rf_sipi_read_addr = rtw8723x_common.rf_sipi_addr,
+	.fix_rf_phy_num = 2,
+	.ltecoex_addr = &rtw8723x_common.ltecoex_addr,
+
+	.mac_tbl = &rtw8703b_mac_tbl,
+	.agc_tbl = &rtw8703b_agc_tbl,
+	.bb_tbl = &rtw8703b_bb_tbl,
+	.rf_tbl = {&rtw8703b_rf_a_tbl},
+
+	.rfe_defs = rtw8703b_rfe_defs,
+	.rfe_defs_size = ARRAY_SIZE(rtw8703b_rfe_defs),
+
+	.iqk_threshold = 8,
+	.pwr_track_tbl = &rtw8703b_rtw_pwr_track_tbl,
+
+	/* WOWLAN firmware exists, but not implemented yet */
+	.wow_fw_name = "rtw88/rtw8703b_wow_fw.bin",
+	.wowlan_stub = NULL,
+	.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
+
+	/* Vendor driver has a time-based format, converted from
+	 * 20180330
+	 */
+	.coex_para_ver = 0x0133ed6a,
+	.bt_desired_ver = 0x1c,
+	.scbd_support = true,
+	.new_scbd10_def = true,
+	.ble_hid_profile_support = false,
+	.wl_mimo_ps_support = false,
+	.pstdma_type = COEX_PSTDMA_FORCE_LPSOFF,
+	.bt_rssi_type = COEX_BTRSSI_RATIO,
+	.ant_isolation = 15,
+	.rssi_tolerance = 2,
+	.bt_rssi_step = bt_rssi_step_8703b,
+	.wl_rssi_step = wl_rssi_step_8703b,
+	/* sant -> shared antenna, nsant -> non-shared antenna
+	 * Not sure if 8703b versions with non-shard antenna even exist.
+	 */
+	.table_sant_num = ARRAY_SIZE(table_sant_8703b),
+	.table_sant = table_sant_8703b,
+	.table_nsant_num = 0,
+	.table_nsant = NULL,
+	.tdma_sant_num = ARRAY_SIZE(tdma_sant_8703b),
+	.tdma_sant = tdma_sant_8703b,
+	.tdma_nsant_num = 0,
+	.tdma_nsant = NULL,
+	.wl_rf_para_num = ARRAY_SIZE(rf_para_tx_8703b),
+	.wl_rf_para_tx = rf_para_tx_8703b,
+	.wl_rf_para_rx = rf_para_rx_8703b,
+	.bt_afh_span_bw20 = 0x20,
+	.bt_afh_span_bw40 = 0x30,
+	.afh_5g_num = ARRAY_SIZE(afh_5g_8703b),
+	.afh_5g = afh_5g_8703b,
+	/* REG_BTG_SEL doesn't seem to have a counterpart in the
+	 * vendor driver. Mathematically it's REG_PAD_CTRL1 + 3.
+	 *
+	 * It is used in the cardemu_to_act power sequence by though
+	 * (by address, 0x0067), comment: "0x67[0] = 0 to disable
+	 * BT_GPS_SEL pins" That seems to fit.
+	 */
+	.btg_reg = NULL,
+	/* These registers are used to read (and print) from if
+	 * CONFIG_RTW88_DEBUGFS is enabled.
+	 */
+	.coex_info_hw_regs_num = 0,
+	.coex_info_hw_regs = NULL,
+};
+EXPORT_SYMBOL(rtw8703b_hw_spec);
+
+MODULE_FIRMWARE("rtw88/rtw8703b_fw.bin");
+MODULE_FIRMWARE("rtw88/rtw8703b_wow_fw.bin");
+
+MODULE_AUTHOR("Fiona Klute <fiona.klute@gmx.de>");
+MODULE_DESCRIPTION("Realtek 802.11n wireless 8703b driver");
+MODULE_LICENSE("Dual BSD/GPL");