| Message ID | 20240313093031.3507979-1-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | mmc: renesas_sdhi: Set the SDBUF after reset | expand |
On 3/13/24 12:30 PM, Claudiu wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > For development purpose, renesas_sdhi_probe() could be called w/ > dma_ops = NULL to force the usage of PIO mode. In this case the > renesas_sdhi_enable_dma() will not be called before transferring data. > > If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable() > call from renesas_sdhi_probe() will configure SDBUF by calling the > renesas_sdhi_sdbuf_width() function, but then SDBUF will be reseted in s/reseted/reset/. > tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset(). > If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S. > > To fix this call again the renesas_sdhi_sdbuf_width(host, 16); in Semicolon clearly doesn't fit here... > renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not > removed from renesas_sdhi_clk_enable() as the host->reset() is optional. > > Co-developed-by: Hien Huynh <hien.huynh.px@renesas.com> > Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> [...] > diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c > index c675dec587ef..b51e04fa5445 100644 > --- a/drivers/mmc/host/renesas_sdhi_core.c > +++ b/drivers/mmc/host/renesas_sdhi_core.c > @@ -589,6 +589,12 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve) > sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); > priv->needs_adjust_hs400 = false; > renesas_sdhi_set_clock(host, host->clk_cache); > + > + /* > + * In case the controller works in PIO mode the SDBUF needs to be set as its Well, it won't hurt wrapping the comment at 80 columns here... > + * reset value is zero. > + */ > + renesas_sdhi_sdbuf_width(host, 16); > } else if (priv->scc_ctl) { > renesas_sdhi_scc_reset(host, priv); > } MBR, Sergey
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index c675dec587ef..b51e04fa5445 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -589,6 +589,12 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve) sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); priv->needs_adjust_hs400 = false; renesas_sdhi_set_clock(host, host->clk_cache); + + /* + * In case the controller works in PIO mode the SDBUF needs to be set as its + * reset value is zero. + */ + renesas_sdhi_sdbuf_width(host, 16); } else if (priv->scc_ctl) { renesas_sdhi_scc_reset(host, priv); }