From patchwork Wed Mar 27 18:45:28 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Avri Altman X-Patchwork-Id: 13607278 Received: from esa2.hgst.iphmx.com (esa2.hgst.iphmx.com [68.232.143.124]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1B6DC12E1ED for ; Wed, 27 Mar 2024 18:45:44 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=68.232.143.124 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711565147; cv=none; b=l/b71REFUphNJqXibDKtvp1sooKmTOG4wwK3bZLeqgtDkXDi1IH+1af9HTlccRUs4N3puyXAWYjbmejuzaphFHCNX5+Tw02YL0oqcSc818hZcGl0mVkcyNFWv//mXhHJ0STuYWw3Lc982eQg7/lMs94IlmLGTuyPovL8lAi2seY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711565147; c=relaxed/simple; bh=CqMpuRyC2PKiBERysfvO1nXJjTw9rNj1ogwemNixDog=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=gWm9hXXEr9tXDsZHUA6A9dHl1nhhZ6h84RyBZSU5ddGPjGGm+p/waj/aU0Ya9FelfHfks3HCzVXfTsT1O/FzMhhNKINwL+upZJmmhvVl4omAF93MJld882sL3AlnSbhE8RdYtk63ksnf4wQevKuQPRzi+evJalZ23/Ohbm/rg4A= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=wdc.com; spf=pass smtp.mailfrom=wdc.com; dkim=pass (2048-bit key) header.d=wdc.com header.i=@wdc.com header.b=rcaem3DB; arc=none smtp.client-ip=68.232.143.124 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=wdc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=wdc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=wdc.com header.i=@wdc.com header.b="rcaem3DB" DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=wdc.com; i=@wdc.com; q=dns/txt; s=dkim.wdc.com; t=1711565145; x=1743101145; h=from:to:cc:subject:date:message-id:mime-version: content-transfer-encoding; bh=CqMpuRyC2PKiBERysfvO1nXJjTw9rNj1ogwemNixDog=; b=rcaem3DBxCu3Oyz4X9g/J2ndA0xEAXx9r6UXRhuLsXi1u9Y8QWldzVPa xocfFw0x6Wz+IiQ8PigkYVcANLDK8eONBj1+WefYpSMfbGdrAr9wwCdX9 Eq+ORwYu4VxjOPRo10V+F9uIMX+H0NsGMv2y0N1ollfJtKRUYwU17Y2ft Nm5U7bIYPi8b4sxQ0AdkEHxHeOoZaJM6IMlSpqhexw3a89q0IwM8WIwc+ UfknkWw7WOyq8h5ZR8V1fAKlWBZYetK8njqqEPT/vFs98Ah0OZaaHS/po ZxGZuGABo1iyAS76EsjGfH3jX6FBr/7tDJ5jq8OEOrFvzQ9e1KqKh3v06 Q==; X-CSE-ConnectionGUID: aBJUmy0SSCKGkzuGZfa4DQ== X-CSE-MsgGUID: na4a2I4ESXCjiEQUSkV33A== X-IronPort-AV: E=Sophos;i="6.07,159,1708358400"; d="scan'208";a="12628594" Received: from h199-255-45-15.hgst.com (HELO uls-op-cesaep02.wdc.com) ([199.255.45.15]) by ob1.hgst.iphmx.com with ESMTP; 28 Mar 2024 02:45:38 +0800 IronPort-SDR: jVOKsYalBO/POOqLY8h1X5n4wdk4J8n79oA1lo0+JQqF2RTN4QREKjYyHprg7dDBiAFE4JYORE q8wQIXEly32g== Received: from uls-op-cesaip01.wdc.com ([10.248.3.36]) by uls-op-cesaep02.wdc.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 27 Mar 2024 10:48:41 -0700 IronPort-SDR: u1zyBXV+wUb9hMvZYZSEoa5M32TSwnyZXZt5fy4E12gYrA4m1aHG2R1FZmNqXQfvks4jmfivlu EGy8exJ1E2vw== WDCIronportException: Internal Received: from 5cg1443s5d.ad.shared (HELO BXYGM33.ad.shared) ([10.225.32.191]) by uls-op-cesaip01.wdc.com with ESMTP; 27 Mar 2024 11:45:37 -0700 From: Avri Altman To: Ulf Hansson , linux-mmc@vger.kernel.org Cc: Avri Altman Subject: [PATCH v2] mmc-utils: man 1 mmc-utils Date: Wed, 27 Mar 2024 20:45:28 +0200 Message-ID: <20240327184528.788-1-avri.altman@wdc.com> X-Mailer: git-send-email 2.42.0 Precedence: bulk X-Mailing-List: linux-mmc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 I have put together a draft man page for mmc-utils. The contents are from mmc-utils help documents and edited for brevity. The point is not to replace the existing docmentation, but to serve as a quick reference. Signed-off-by: Avri Altman --- Changelog: v1->v2: Fix some spelling mistakes --- Makefile | 9 +- mmc.1 | 308 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 312 insertions(+), 5 deletions(-) create mode 100644 mmc.1 diff --git a/Makefile b/Makefile index 10b78ab..a890833 100644 --- a/Makefile +++ b/Makefile @@ -21,6 +21,7 @@ prefix ?= /usr/local bindir = $(prefix)/bin LIBS= RESTORE_LIBS= +mandir = /usr/share/man progs = mmc @@ -29,7 +30,7 @@ ifdef C check = sparse $(CHECKFLAGS) endif -all: $(progs) manpages +all: $(progs) .c.o: ifdef C @@ -43,16 +44,14 @@ mmc: $(objects) manpages: $(MAKE) -C man -install-man: - $(MAKE) -C man install - clean: rm -f $(progs) $(objects) $(MAKE) -C man clean -install: $(progs) install-man +install: $(progs) $(INSTALL) -m755 -d $(DESTDIR)$(bindir) $(INSTALL) $(progs) $(DESTDIR)$(bindir) + $(INSTALL) -m 644 mmc.1 $(DESTDIR)$(mandir)/man1 -include $(foreach obj,$(objects), $(dir $(obj))/.$(notdir $(obj)).d) diff --git a/mmc.1 b/mmc.1 new file mode 100644 index 0000000..888b8b6 --- /dev/null +++ b/mmc.1 @@ -0,0 +1,308 @@ +.TH mmc\-utils 1 "April 2024" "User Manual" +.SH NAME +mmc \- a tool for configuring MMC storage devices +.SH SYNOPSIS +.B mmc +[\fIoptions\fR] [\ mmc\-block\-device\fR]... +.SH DESCRIPTION +.B mmc-utils +is a single-threaded tool that will perform a particular type of mmc action as specified by the user. +.br +The typical use of mmc-utils is to access the mmc device either for configuring or reading its configuration registers. +.SH OPTIONS +.TP +.BI extcsd " " read " " \fIdevice\fR +Read and prints the extended csd register +.TP +.BI extcsd " " write " " \fIoffset\fR " " \fIvalue\fR " " \fIdevice\fR +Write \fIvalue\fR at \fIoffset\fR to the device's extcsd +.TP +.BI writeprotect " " boot " " get " " \fIdevice\fR +Print the boot partitions write protect status +.TP +.BI writeprotect " " boot " " set " " \fIdevice\fR " " [\fInumber\fR] +Set the boot partition write protect status for the device. +.br +If \fInumber\fR is passed (0 or 1), only protect that particular eMMC boot partition, otherwise protect both. +.br +It will be write-protected until the next boot. +.TP +.BI writeprotect " " user " " set " " \fItype\fR " " \fIstart\-block\fR " " \fIblocks\fR " " \fIdevice\fR +Set the write protect configuration for the specified region of the user area for the device. +.br +\fIstart\-block\fR specifies the first block of the protected area. +.br +\fIblocks\fR specifies the size of the protected area in blocks. +.br +NOTE! The area must start and end on Write Protect Group boundaries, Use the "writeprotect user get" command to get the Write Protect Group size. + \fItype\fR is one of the following: +.RS +.RS +.TP +.B none +Clear temporary write protection. +.TP +.B temp +Set temporary write protection. +.TP +.B pwron +Set write protection until the next power on. +.RE +.RE +.TP +.BI writeprotect " " user " " get " " \fIdevice\fR +Print the user areas write protect configuration for the device. +.TP +.BI disable " " 512B " " emulation " " \fIdevice\fR +Set the eMMC data sector size to 4KB by disabling emulation on the device. +.TP +.BI gp " " create " " \fIdry\-run\fR " " \fIlength\-KiB\fR " " \fIpartition\fR " " \fIenh\-attr\fR " " \fIext\-attr\fR " " \fIdevice\fR +Create general purpose partition for the the device. +.br +NOTE! This is a one-time programmable (unreversible) change. +.br +To set enhanced attribute to general partition being created set \fIenh\-attr\fR to 1 else set it to 0. +.br +To set extended attribute to general partition set \fIenh\-attr\fR to 1,2 else set it to 0. +.br +\fIdry\-run\fR is one of the following: +.RS +.RS +.TP +.B \-y +PARTITION_SETTING_COMPLETED in the extcsd will get set and the partisioning operation will take effect and finalized. +.TP +.B \-c +more partitioning settings are still to come - partitioning operation will not take effect. +.TP +.B otherwise +These changes will not take effect neither now nor after a power cycle. +.RE +.RE +.TP +.BI enh_area " " set " " \fIdry\-run\fR " " \fIstart\-KiB\fR " " \fIlength\-KiB\fR " " \fIdevice\fR +Enable the enhanced user area for the device. +.br +NOTE! This is a one-time programmable (unreversible) change. +\fIdry\-run\fR is as above. +.TP +.BI write_reliability " " set " " " \fIdry\-run\fR " " \fIpartition\fR " " \fIdevice\fR +Enable write reliability per partition for the device. +.br +NOTE! This is a one-time programmable (unreversible) change. +\fIdry\-run\fR is as above. +.TP +.BI status " " get " " \fIdevice\fR +Print the response to STATUS_SEND (CMD13). +.TP +.BI bootpart " " enable " " \fIboot\-partition\fR " " \fIsend\-ackn\fR " " \fIdevice\fR +Enable the boot partition for the device. +Disable the boot partition for the device if is \fIboot\-partition\fR set to 0. +.br +To receive acknowledgment of boot from the card set \fIsend\-ackn\fR to 1, else set it to 0. +.TP +.BI bootbus " " set " " \fIboot\-mode\fR " " \fIreset\-boot\-bus\-conditions\fR " " \fIboot\-bus\-width\fR " " \fIdevice\fR +Set Boot Bus Conditions. +.br +\fIboot\-mode\fR is one of the following: single_backward, single_hs, or dual. +.br +\fIreset\-boot\-bus\-conditions\fR is one of the following: x1 or retain. +.br +\fIboot\-bus\-width\fR is one of the following: x1, x4, or x8. +.TP +.BI bkops_en " " \fImode\fR " " \fIdevice\fR +Enable the eMMC BKOPS feature on the device. +The auto (AUTO_EN) setting is only supported on eMMC 5.0 or newer. +.br +NOTE! Setting manual (MANUAL_EN) is one-time programmable (unreversible) change. +.br +\fImode\fR is one of the following: +.RS +.RS +.TP +.B auto +Auto backops is set +.TP +.B manual +Manual bkops is set +.RE +.RE +.TP +.BI hwreset " " enable " " \fIdevice\fR +Permanently enable the eMMC H/W Reset feature on the device. +.br +NOTE! This is a one-time programmable (unreversible) change. +.TP +.BI hwreset " " disable " " \fIdevice\fR +Permanently disable the eMMC H/W Reset feature on the device. +.br +NOTE! This is a one-time programmable (unreversible) change. +.TP +.BI sanitize " " \fIdevice\fR " " \fI[timeout_ms]\fR +Send Sanitize command to the device. +This will delete the unmapped memory region of the device. +.TP +.BI rpmb " " write\-key " " \fIrpmb\-device\fR " " \fIkey\-file\fR +Program authentication key which is 32 bytes length and stored in the specified file. +.br +Also you can specify '-' instead of key file path to read the key from stdin. +.br +NOTE! This is a one-time programmable (unreversible) change. +.TP +.BI rpmb " " read\-counter " " \fIrpmb\-device\fR +Counter value for the \fIrpmb\-device\fR will be read to stdout. +.TP +.BI rpmb " " read\-block " " \fIrpmb\-device\fR " " \fIaddress\fR " " \fIblocks-\count\fR " " \fIoutput-\file\fR " " [\fIkey\-file\fR] +Blocks of 256 bytes will be read from \fIrpmb\-device\fR to output +file or stdout if '-' is specified. If key is specified - read +data will be verified. +.TP +.BI rpmb " " write\-block " " \fIrpmb\-device\fR " " \fIaddress\fR " " \fI256\-byte\-data\-file\fR " " \fIkey\-file\fR +Block of 256 bytes will be written from data file to +\fIrpmb\-device\fR. +.br +Also you can specify '-' instead of key file path or data file to read the data from stdin. +.TP +.BI cache " " enable " " \fIdevice\fR +Enable the eMMC cache feature on the device. +.br +NOTE! The cache is an optional feature on devices >= eMMC4.5. +.TP +.BI cache disable " " \fIdevice\fR +Disable the eMMC cache feature on the device. +.br +NOTE! The cache is an optional feature on devices >= eMMC4.5. +.TP +.BI csd " " read " " \fidevice\-path\fR +Print CSD data from \fIdevice\-path\fR. +The device path should specify the csd sysfs file directory. +.TP +.BI cid " " read " " \fIdevice\-path\fR +Print CID data from \fIdevice\-path\fR. +The device path should specify the cid sysfs file directory. +.TP +.BI scr " " read " " \fIdevice\-path\fR +Print SCR data from \fIdevice\-path\fR. +The device path should specify the scr sysfs file directory. +.TP +.BI ffu " " \fIimage\-file\-name\fR " " \fIdevice\fR " " [\fIchunk\-bytes\fR] +Run Field Firmware Update with \fIimage\-file\-name\fR on the device. +.br +[\fIchunk\-bytes\fR] is optional and defaults to its max - 512k. should be in decimal bytes and sector aligned. +.br +if [\fIchunk\-bytes\fR] is omitted, mmc-utils will try to run ffu using the largest possible chunks: max(image-file, 512k). +.TP +.BI erase " " \fItype\fR " " \fIstart-address\fR " " \fIend\-address\fR " " \fIdevice\fR +Send Erase CMD38 with specific argument to the device. +.br +NOTE!: This will delete all user data in the specified region of the device. +.br +\fItype\fR is one of the following: legacy, discard, secure-erase, secure-trim1, secure-trim2, or trim. +.TP +.BI gen_cmd " " read " \fidevice\fR [\fIarg\fR] +Send GEN_CMD (CMD56) to read vendor-specific format/meaning data from the device. +.br +NOTE!: [\fIarg\fR] is optional and defaults to 0x1. If [\fIarg\fR] is specified, then [\fIarg\fR] +must be a 32-bit hexadecimal number, prefixed with 0x/0X. And bit0 in [\fIarg\fR] must be 1. +Normally this command is aimed to extract a device-health info from the device. +.TP +.BI softreset " " \fIdevice\fR +Issues a CMD0 softreset, e.g. for testing if hardware reset for UHS works +.TP +.BI boot_operation " " \fIboot\-data\-file\fR " " \fIdevice\fR + Does the alternative boot operation and writes the specified starting blocks of boot data into the requested file. +Note some limitations: +.RS +.RS +.TP +.B 1) +The boot operation must be configured first, e.g. via bootbus and/or bootpart commands +.TP +.B 2) +The MMC must currently be running at the bus mode that is configured for the boot operation (HS200 and HS400 not supported at all). +.TP +.B 3) +Only up to 512K bytes of boot data will be transferred. +.TP +.B 4) +The MMC will perform a soft reset, if your system cannot handle that do not use the boot operation from mmc-utils. +.RE +.RE +.TP +.BI \-\-help " " | " " help " " | " " \-h +Show the help +.TP +.BI \fIcmd\fR " " \-\-help +Show detailed help for that specific \fIcmd\fR or subset of commands. +.SH "RPMB COMMANDS" +The RPMB partition on the eMMC devices is a special area used for storing cryptographically safe information signed by a +special secret key. +.br +To write and read records from this special area, authentication is needed. +.br +The RPMB area is *only* and *exclusively* accessed using ioctl()s from user-space. +.br +RPMB commands are send using the mmc multi-ioctl, thus ensures that the atomic nature of the rpmb access operation. +.br +The rpmb device given as a parameter to the rpmb commands is not a block device but a char device. +.br +This was done to help the mmc driver to account for some of the rpmb peculiarities. +.SH "EXAMPLES" +.RE +.P +.B RPMB examples +.RS +Program rpmb key using the stdin option: +.RS +.P +$ echo -n AAAABBBBCCCCDDDDEEEEFFFFGGGGHHHH | mmc rpmb write-key /dev/mmcblk0rpmb - +.RE +.P +Read 2 blocks starting address 2 and output the received content to stdout. Verify the received frames using the key (not mandatory): +.RS +.P +$ echo -n AAAABBBBCCCCDDDDEEEEFFFFGGGGHHHH | mmc rpmb read-block /dev/mmcblk0rpmb 0x02 2 - +.RE +.P +Read 2 blocks without verification starting address 2 and output the received content to /tmp/block: +.RS +.P +$mmc rpmb read-block /dev/mmcblk0rpmb 0x02 2 /tmp/block +.RE +.P +Write a string of 'a's to address 2. both the input and key uses stdin interface: +.RS +.P +$ (awk 'BEGIN {while (c++<256) printf "a"}' | echo -n AAAABBBBCCCCDDDDEEEEFFFFGGGGHHHH) | mmc rpmb write-block /dev/mmcblk0rpmb 0x02 - - +.RE +.P +.RE +.P +.B Field Firmware Update (ffu) examples +.RS +Do ffu using max-possible chunk size: If the fluf size < 512k, it will be flushed in a single write sequence. +.RS +.P +$ mmc ffu IO4e0aC2056001801M1100042AE1.fluf /dev/mmcblk0 +.RE +.P +Same as above, this time use a 4k chunks: +.RS +.P +$ mmc ffu IO4e0aC2056001801M1100042AE1.fluf /dev/mmcblk0 4096 +.RE +.P +.RE +.SH AUTHORS +.B mmc-utils +was written by Chris Ball and . +.br +It is currently maintained by Ulf Hansson . +.SH "REPORTING BUGS" +Report bugs to the \fBmmc\fR mailing list . +.SH "SEE ALSO" +For further documentation see \fBREADME\fR. +.br +A short intro - https://docs.kernel.org/driver-api/mmc/mmc-tools.html +.br +official git tree - https://git.kernel.org/pub/scm/utils/mmc/mmc-utils.git