@@ -130,14 +130,16 @@ struct sdhci_s3c {
* struct sdhci_s3c_drv_data - S3C SDHCI platform specific driver data
* @sdhci_quirks: sdhci host specific quirks.
* @no_divider: no or non-standard internal clock divider.
+ * @ops: sdhci_ops to use for this variant
*
* Specifies platform specific configuration of sdhci controller.
* Note: A structure for driver specific platform data is used for future
* expansion of its usage.
*/
struct sdhci_s3c_drv_data {
- unsigned int sdhci_quirks;
- bool no_divider;
+ unsigned int sdhci_quirks;
+ bool no_divider;
+ const struct sdhci_ops *ops;
};
static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
@@ -412,7 +414,7 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
}
-static struct sdhci_ops sdhci_s3c_ops = {
+static const struct sdhci_ops sdhci_s3c_ops_s3c6410 = {
.get_max_clock = sdhci_s3c_get_max_clk,
.set_clock = sdhci_s3c_set_clock,
.get_min_clock = sdhci_s3c_get_min_clock,
@@ -421,6 +423,15 @@ static struct sdhci_ops sdhci_s3c_ops = {
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
+static const struct sdhci_ops sdhci_s3c_ops_exynos4 = {
+ .get_max_clock = sdhci_cmu_get_max_clock,
+ .set_clock = sdhci_cmu_set_clock,
+ .get_min_clock = sdhci_cmu_get_min_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
#ifdef CONFIG_OF
static int sdhci_s3c_parse_dt(struct device *dev,
struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
@@ -560,7 +571,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
pdata->cfg_gpio(pdev, pdata->max_width);
host->hw_name = "samsung-hsmmc";
- host->ops = &sdhci_s3c_ops;
+ host->ops = &sdhci_s3c_ops_s3c6410;
host->quirks = 0;
host->quirks2 = 0;
host->irq = irq;
@@ -570,6 +581,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
if (drv_data) {
host->quirks |= drv_data->sdhci_quirks;
+ host->ops = drv_data->ops;
sc->no_divider = drv_data->no_divider;
}
@@ -617,16 +629,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
- /*
- * If controller does not have internal clock divider,
- * we can use overriding functions instead of default.
- */
- if (sc->no_divider) {
- sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
- sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
- sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
- }
-
/* It supports additional host capabilities if needed */
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
@@ -758,6 +760,7 @@ MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
#ifdef CONFIG_OF
static const struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
.no_divider = true,
+ .ops = &sdhci_s3c_ops_exynos4,
};
static const struct of_device_id sdhci_s3c_dt_match[] = {
The difference between old S3C64xx and newer Exynos4 SDHCI controller variants is in clock handling (the "no_divider" field in drvdata). Choose the proper sdhci_ops based on the variant instead of patching ops in probe, if Exynos4 is used. This allows making struct sdhci_ops const for code safety and probably opens further options in the future, as the dynamic pointer ops table is not anymore that dynamic. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/mmc/host/sdhci-s3c.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-)