diff mbox series

[v1,5/5] mmc-utils: add FFU mode 5 for firmware download using CMD6 and repeated CMD24 commands

Message ID 20241001203811.26279-6-beanhuo@iokpp.de (mailing list archive)
State New
Headers show
Series Add multiple FFU modes based on eMMC specification 6.6.18 for flexible firmware updates | expand

Commit Message

Bean Huo Oct. 1, 2024, 8:38 p.m. UTC
From: Bean Huo <beanhuo@micron.com>

Add FFU mode 5 which enters FFU mode with CMD6, followed by repeated CMD24 commands to perform
single-block writes for the firmware download. After downloading all firmware data, CMD6 is issued
to exit FFU mode.

Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 mmc.c     |  3 ++-
 mmc_ffu.c | 16 ++++++++++++----
 2 files changed, 14 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/mmc.c b/mmc.c
index 2fdfdce..8f71a51 100644
--- a/mmc.c
+++ b/mmc.c
@@ -236,7 +236,8 @@  static struct Command commands[] = {
 		" -m 1: Default mode (CMD6+CMD23+CMD25+CMD6 repeated), may exit FFU mode if the firmware size exceeds chunk size.\n"
 		" -m 2: FFU mode 2 (enter FFU mode, CMD23+CMD25 repeated, exit FFU mode), stays in FFU mode until firmware download completes.\n"
 		" -m 3: FFU mode 3 (enter FFU mode, CMD25+CMD12 repeated, exit FFU mode), stays in FFU mode until firmware download completes.\n"
-		" -m 4: FFU mode 4 (CMD6+CMD24+CMD6 repeated), exits FFU mode after each cycle.\n",
+		" -m 4: FFU mode 4 (CMD6+CMD24+CMD6 repeated), exits FFU mode after each cycle.\n"
+		" -m 5: FFU mode 5 (CMD6 enter FFU mode, CMD24 repeated,  CMD6 exit FFU mode) stays in FFU mode until firmware download completes.\n",
 	  NULL
 	},
 	{ do_erase, -4,
diff --git a/mmc_ffu.c b/mmc_ffu.c
index fff7b11..5e3c59f 100644
--- a/mmc_ffu.c
+++ b/mmc_ffu.c
@@ -60,6 +60,9 @@  static void set_ffu_download_cmd(struct mmc_ioc_multi_cmd *multi_cmd, __u8 *ext_
 		set_single_cmd(&multi_cmd->cmds[1], MMC_WRITE_BLOCK, 1, 1, arg);
 		mmc_ioc_cmd_set_data(multi_cmd->cmds[1], buf + offset);
 		fill_switch_cmd(&multi_cmd->cmds[2], EXT_CSD_MODE_CONFIG, EXT_CSD_NORMAL_MODE);
+	} else {
+		set_single_cmd(&multi_cmd->cmds[0], MMC_WRITE_BLOCK, 1, 1, arg);
+		mmc_ioc_cmd_set_data(multi_cmd->cmds[0], buf + offset);
 	}
 }
 
@@ -148,6 +151,8 @@  static int do_ffu_download(int *dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_si
 		num_of_cmds = 2;
 	else if (ffu_mode == 4)
 		num_of_cmds = 3;
+	else if (ffu_mode == 5)
+		num_of_cmds = 1;
 
 	/* allocate maximum required */
 	multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) + num_of_cmds * sizeof(struct mmc_ioc_cmd));
@@ -169,11 +174,14 @@  do_retry:
 		/* prepare multi_cmd for FFU based on cmd to be used */
 		set_ffu_download_cmd(multi_cmd, ext_csd, bytes_per_loop, fw_buf, off, ffu_mode);
 
-		/* send ioctl with multi-cmd, download firmware bundle */
-		ret = ioctl(*dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+		if (num_of_cmds > 1)
+			/* send ioctl with multi-cmd, download firmware bundle */
+			ret = ioctl(*dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+		else
+			ret = ioctl(*dev_fd, MMC_IOC_CMD, &multi_cmd->cmds[0]);
 
 		if (ret) {
-			perror("Multi-cmd ioctl");
+			perror("ioctl failed!");
 			/*
 			 * In case multi-cmd ioctl failed before exiting from
 			 * ffu mode
@@ -245,7 +253,7 @@  int do_ffu(int nargs, char **argv)
 			break;
 		case 'm':
 			ffu_mode = atoi(optarg);
-			if (ffu_mode > 4) {
+			if (ffu_mode > 5) {
 				fprintf(stderr, "Unsupported ffu mode `%d'.\n", ffu_mode);
 				abort();
 			}