@@ -192,6 +192,9 @@ Run Field Firmware Update with \fIimage\-file\-name\fR on the device.
.br
if [\fIchunk\-bytes\fR] is omitted, mmc-utils will try to run ffu using the largest possible chunks: max(image-file, 512k).
.TP
+.BI opt_ffu1 " \fIimage\-file\-name\fR " " \fIdevice\fR " " [\fIchunk\-bytes\fR]
+Optional FFU mode 1, it's the same as 'ffu', but uses CMD23+CMD25 for repeated downloads and remains in FFU mode until completion.
+.TP
.BI erase " " \fItype\fR " " \fIstart-address\fR " " \fIend\-address\fR " " \fIdevice\fR
Send Erase CMD38 with specific argument to the device.
.br
@@ -234,6 +234,11 @@ static struct Command commands[] = {
"should be in decimal bytes and sector aligned.\n",
NULL
},
+ { do_opt_ffu1, -2,
+ "opt_ffu1", "<image name> <device> [chunk-bytes]\n"
+ "Optional FFU mode 1, it's the same as 'ffu', but uses CMD23+CMD25 for repeated downloads and remains in FFU mode until completion.\n",
+ NULL
+ },
{ do_erase, -4,
"erase", "<type> " "<start address> " "<end address> " "<device>\n"
"Send Erase CMD38 with specific argument to the <device>\n\n"
@@ -59,6 +59,13 @@
#define WPTYPE_PWRON 2
#define WPTYPE_PERM 3
+
+// Firmware Update (FFU) download modes
+enum ffu_download_mode {
+ FFU_DEFAULT_MODE, // Default mode: Uses CMD23+CMD25; exits FFU mode after each loop.
+ FFU_OPT_MODE1 // Optional mode 1: Uses CMD23+CMD25; but stays in FFU mode during download.
+};
+
static inline __u32 per_byte_htole32(__u8 *arr)
{
return arr[0] | arr[1] << 8 | arr[2] << 16 | arr[3] << 24;
@@ -2813,23 +2820,40 @@ out:
static void set_ffu_download_cmd(struct mmc_ioc_multi_cmd *multi_cmd,
__u8 *ext_csd, unsigned int bytes, __u8 *buf,
- off_t offset)
+ off_t offset, enum ffu_download_mode ffu_mode)
{
__u32 arg = per_byte_htole32(&ext_csd[EXT_CSD_FFU_ARG_0]);
- /* send block count */
- set_single_cmd(&multi_cmd->cmds[1], MMC_SET_BLOCK_COUNT, 0, 0,
- bytes / 512);
- multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
-
- /*
- * send image chunk: blksz and blocks essentially do not matter, as
- * long as the product is fw_size, but some hosts don't handle larger
- * blksz well.
- */
- set_single_cmd(&multi_cmd->cmds[2], MMC_WRITE_MULTIPLE_BLOCK, 1,
- bytes / 512, arg);
- mmc_ioc_cmd_set_data(multi_cmd->cmds[2], buf + offset);
+ /* prepare multi_cmd for FFU based on cmd to be used */
+ if (ffu_mode == FFU_DEFAULT_MODE) {
+ /* put device into ffu mode */
+ fill_switch_cmd(&multi_cmd->cmds[0], EXT_CSD_MODE_CONFIG, EXT_CSD_FFU_MODE);
+ /* send block count */
+ set_single_cmd(&multi_cmd->cmds[1], MMC_SET_BLOCK_COUNT, 0, 0,
+ bytes / 512);
+ multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+
+ /*
+ * send image chunk: blksz and blocks essentially do not matter, as
+ * long as the product is fw_size, but some hosts don't handle larger
+ * blksz well.
+ */
+ set_single_cmd(&multi_cmd->cmds[2], MMC_WRITE_MULTIPLE_BLOCK, 1,
+ bytes / 512, arg);
+ mmc_ioc_cmd_set_data(multi_cmd->cmds[2], buf + offset);
+ /* return device into normal mode */
+ fill_switch_cmd(&multi_cmd->cmds[3], EXT_CSD_MODE_CONFIG, EXT_CSD_NORMAL_MODE);
+ } else if (ffu_mode == FFU_OPT_MODE1) {
+ /*
+ * FFU mode 2 uses CMD23+CMD25 for repeated downloads and remains in FFU mode
+ * during FW bundle downloading until completion. In this mode, multi_cmd only
+ * has 2 sub-commands.
+ */
+ set_single_cmd(&multi_cmd->cmds[0], MMC_SET_BLOCK_COUNT, 0, 0, bytes / 512);
+ multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ set_single_cmd(&multi_cmd->cmds[1], MMC_WRITE_MULTIPLE_BLOCK, 1, bytes / 512, arg);
+ mmc_ioc_cmd_set_data(multi_cmd->cmds[1], buf + offset);
+ }
}
/*
@@ -2873,6 +2897,36 @@ static bool ffu_is_supported(__u8 *ext_csd, char *device)
return true;
}
+static int enter_ffu_mode(int dev_fd)
+{
+ int ret;
+ struct mmc_ioc_cmd cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ fill_switch_cmd(&cmd, EXT_CSD_MODE_CONFIG, EXT_CSD_FFU_MODE);
+ ret = ioctl(dev_fd, MMC_IOC_CMD, &cmd);
+ if (ret)
+ perror("enter FFU mode failed!");
+
+ return ret;
+}
+
+static int exit_ffu_mode(int dev_fd)
+{
+ int ret;
+ struct mmc_ioc_cmd cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ fill_switch_cmd(&cmd, EXT_CSD_MODE_CONFIG, EXT_CSD_NORMAL_MODE);
+ ret = ioctl(dev_fd, MMC_IOC_CMD, &cmd);
+ if (ret)
+ perror("exit FFU mode failed!");
+
+ return ret;
+}
+
/*
* Performs FFU download of the firmware bundle.
*
@@ -2881,12 +2935,13 @@ static bool ffu_is_supported(__u8 *ext_csd, char *device)
* @fw_buf: Pointer to the firmware buffer containing the firmware data to be downloaded.
* @fw_size: Size of the firmware in bytes.
* @chunk_size: Size of the chunks in which the firmware is sent to the device.
+ * @ffu_mode: FFU mode for firmware download mode
*
* Return: If successful, returns the number of sectors programmed.
* On failure, returns a negative error number.
*/
static int do_ffu_download(int dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_size,
- unsigned int chunk_size)
+ unsigned int chunk_size, enum ffu_download_mode ffu_mode)
{
int ret;
__u8 num_of_cmds = 4;
@@ -2898,6 +2953,10 @@ static int do_ffu_download(int dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_siz
fprintf(stderr, "unexpected NULL pointer\n");
return -EINVAL;
}
+
+ if (ffu_mode != FFU_DEFAULT_MODE) /* in default mode, mmc_ioc_multi_cmd contains 4 commands */
+ num_of_cmds = 2;
+
/* allocate maximum required */
multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
num_of_cmds * sizeof(struct mmc_ioc_cmd));
@@ -2906,14 +2965,15 @@ static int do_ffu_download(int dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_siz
return -ENOMEM;
}
- /* prepare multi_cmd for FFU based on cmd to be used */
- /* put device into ffu mode */
- fill_switch_cmd(&multi_cmd->cmds[0], EXT_CSD_MODE_CONFIG,
- EXT_CSD_FFU_MODE);
-
- /* return device into normal mode */
- fill_switch_cmd(&multi_cmd->cmds[3], EXT_CSD_MODE_CONFIG,
- EXT_CSD_NORMAL_MODE);
+ if (ffu_mode != FFU_DEFAULT_MODE) {
+ /*
+ * If the device is not in FFU mode 1, the command to enter FFU mode will be sent
+ * independently, separate from the firmware bundle download command.
+ */
+ ret = enter_ffu_mode(dev_fd);
+ if (ret)
+ goto out;
+ }
do_retry:
bytes_left = fw_size;
@@ -2924,7 +2984,7 @@ do_retry:
bytes_per_loop = bytes_left < chunk_size ? bytes_left : chunk_size;
/* prepare multi_cmd for FFU based on cmd to be used */
- set_ffu_download_cmd(multi_cmd, ext_csd, bytes_per_loop, fw_buf, off);
+ set_ffu_download_cmd(multi_cmd, ext_csd, bytes_per_loop, fw_buf, off, ffu_mode);
/* send ioctl with multi-cmd, download firmware bundle */
ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
@@ -2935,7 +2995,7 @@ do_retry:
* In case multi-cmd ioctl failed before exiting from
* ffu mode
*/
- ioctl(dev_fd, MMC_IOC_CMD, &multi_cmd->cmds[3]);
+ exit_ffu_mode(dev_fd);
goto out;
}
@@ -2962,6 +3022,16 @@ do_retry:
off += bytes_per_loop;
}
+ if (ffu_mode != FFU_DEFAULT_MODE) {
+ /*
+ * If the device is not in FFU mode 1, the command to exit FFU mode will be sent
+ * independently, separate from the firmware bundle download command.
+ */
+ ret = exit_ffu_mode(dev_fd);
+ if (ret)
+ goto out;
+ }
+
ret = get_ffu_sectors_programmed(dev_fd, ext_csd);
out:
free(multi_cmd);
@@ -3009,7 +3079,7 @@ out:
return ret;
}
-int do_ffu(int nargs, char **argv)
+static int __do_ffu(int nargs, char **argv, enum ffu_download_mode ffu_mode)
{
int dev_fd, img_fd;
int ret = -EINVAL;
@@ -3085,7 +3155,7 @@ int do_ffu(int nargs, char **argv)
}
/* Download firmware bundle */
- ret = do_ffu_download(dev_fd, ext_csd, fw_buf, fw_size, default_chunk);
+ ret = do_ffu_download(dev_fd, ext_csd, fw_buf, fw_size, default_chunk, ffu_mode);
/* Check programmed sectors */
if (ret > 0 && (ret * 512) == fw_size) {
fprintf(stderr, "Programmed %jd/%jd bytes\n", (intmax_t)fw_size, (intmax_t)fw_size);
@@ -3125,6 +3195,16 @@ out:
return ret;
}
+int do_ffu(int nargs, char **argv)
+{
+ return __do_ffu(nargs, argv, FFU_DEFAULT_MODE);
+}
+
+int do_opt_ffu1(int nargs, char **argv)
+{
+ return __do_ffu(nargs, argv, FFU_OPT_MODE1);
+}
+
int do_general_cmd_read(int nargs, char **argv)
{
int dev_fd;
@@ -42,6 +42,7 @@ int do_rpmb_write_block(int nargs, char **argv);
int do_cache_en(int nargs, char **argv);
int do_cache_dis(int nargs, char **argv);
int do_ffu(int nargs, char **argv);
+int do_opt_ffu1(int nargs, char **argv);
int do_read_scr(int argc, char **argv);
int do_read_cid(int argc, char **argv);
int do_read_csd(int argc, char **argv);